Designer 6.0 Volumetric Reports

How do you generate a report, from the Server Model, that will identify volumetric information. The type of information I am looking for is table size, row size, index size, etc. in bytes. I need this information to determine how much disk I need to purchase. Any help would be appreciated.

hi Vrushali,
Like you even i've been unsucessfully trying to link the two query cross product groups.
And, by now what i think is that it is not possible!!
now i tried to do the report with a single query cross product group, but now i cannot get the summary total of the matrix column at report level in the frequency of one of the cross product groups.
if u get the solution, it will be very kind of you to just fwd the solution to me too !!
and if do, i'll fwd it to you too
best regards,
jitendar :)
null

Similar Messages

  • How to use more than one page to design a form-like report???

    Hi
    I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
    Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
    Now there is no space at the window to complete designing the report!
    How to make the repeating frame to contain more than one page or one window to complete designing the report?

    change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

  • Hide the design view for the report

    Dear All,
    I would like to block or hide the design view for the Crystal report.
    Please let me know.
    Thanks,
    Raja

    Hi Raja,
    It is not possible to hide the design tab in Crystal Reports.  However,  in Crystal Reports 2008,  there is the ability to password protect a file.
    Regards,
    Wallie

  • Design Invoice in Crystal Report 8.5

    Hello,
    Crystal report is the software used to create reports and documents for the business software we use (it's built-in).
    We have received from the graphic designer a layout design in PDF vectorial format for the sales invoice, but we are having a hard time to make it work with crystal report.
    Is there anyway we can use a full background image? Or does it have to be built by areas with pieces of images?
    Which is the best image extension/format to be used when adding images? We have noticed that using jpg results in a lot of grain. An image with white background will show not white, but grainy making it impossible to look good within the rest of the document.
    We aim to have the invoices both printed or sent by email (PDF or HTM format) and we need it to work with quality both ways. We've noticed as well that using gif (instead of jpg) gives better/good print results, but if we print an invoice that was converted into PDF, though it was not visible on the screen (contrary to jpg), the print will show a grainy background of the image, where it should be white (like described when using jpg).
    I would appreciate your help as we're not managing to find a good enough solution.
    Thank you.

    Hi Rita
    There are certain advantages/limitations while using any kind of image formats which are quite generic in nature(whether with crystal or otherwise).
    If you think that the pdf document which holds the images in it looks good as per your requirement(since you are comparing the results with it) then would suggest you to insert this pdf file directly as an OLE object.
    In Insert>>Ole Object menu you will get to see the option for inserting an Adobe Acrobat Document.
    Please break the pdf document into several pages as crystal would be able to display one page in one OLE object.
    Thanks

  • Designing the SSRS 2012 report

    I want to design the SSRS 2012 like ,
    Report for Supplier detail transactions, (user can select more that one supplier at a time)
    Every page should contain - (New page for new supplier/new transaction)
    Supplier Name : -                    Bank Name : -
    Transaction Date: -                 Currency : -
    Payment Mode : -                    Pay Date : -
    Detail accounts per transaction  (May be sub report - i will pass supp id and tran id )
    Applied invoices (Sub report - i will pass supp id and tran id )
    (Page Footer)
    Total payment : -
    Total Applied Amount : -
    We can do it in crystal report like show subreport in detail section. Can we do in SSRS ??
    h2007

    Can we design a report like "Payslip" in SSRS 2012
    e.g. if there r 10 wmployees so one employee per page.
    Format will be like,
    --------------Start (this for each employee i.e. on each page)
    Emp No :                                  Join date :
    Emp name:                               designation :
    bitrh date:                                 monthly sal :
    age categoty :                           cheque no :
    Total Payment :
    Total deduction :
    Nett pay :
    Detail payments (this is sub rep)                         Detail deductions (sub rep)
    --------------End
    h2007

  • How to design a snapshot Table / Report in OBIEE

    Hello All,
    I am currently developing a report in which I need to compare the Cost at diff times.
    Year view should compare current cost with year ago cost for the same item, similarly Month view shoud compare current cost with month ago cost.
    Any help to design this report is highly appreciated.
    Thanks.

    Hi,
    I have created two measures for Yago cost and Mago cost.
    But When I run a request using any of these measures I am getting the below error.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22047]
    The Dimension used in AGO function must be referenced in the query. (HY000)
    I tried to run the request including the dimensions used in AGO.
    As suggested in the Metalink, I have added "<ReportAggregateEnabled>true</ReportAggregateEnabled>" to instance config and refreshed PS.
    Still I am getting the same error. Can you please guide to resolve this issue.
    Srikanth,
    I haven't tried your solution yet.
    Thanks.

  • Drill in feature in SAP BOBj Design Studio to Webi Report

    Hello Guru's ,
    do you know if one can drill in to Webi report from Sap BOBJ design studio ..just like dashboard to webi.
    i cant seem to find it anywhere.
    P.s: moderator can you move this thread to the right discussion if i posted it in the wrong form.

    Hi Veronika,
    First you have to identify what are your variables on the WEBI prompt. If you have created the WEBI report based on a BEX Query, the variable names would be the BEX variable technical names.
    Then you just have to add &lsS<VARIABLENAME>=<VALUE> at the end of the URL string.
    For example:
    &lsSENTITY= VALUE
    &lsSTIME = VALUE
    &lsSACCOUNT = VALUE
    So the test URL would be: http://servername:8080/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Afkcg9PzltNKtz7LEzNGHdY&NAII=N&lsSENTITY=VALUE&lsSTIME=VALUE
    &lsSACCOUNT=VALUE
    To get BPC configured you have to follow these steps:
    Go to the Administration Client -> Application -> Drill Throughs -> Add Drill Through
    Name your new Drill Throug and on the second screen type in:
    URL: http://servername:8080/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Afkcg9PzltNKtz7LEzNGHdY&NAII=N
    URL Parameters  //  Mapping Source  //  Property/Value
    lsSENTITY           //  ENTITY                 // ID
    lsSTIME               //  TIME                     //  ID
    lsSACCOUNT      //  ACCOUNT           //  ID
    Hope it helps!
    Best regards,
    Marcio Costa

  • Problem in designing multiple columns crystal report

    I have got a crystal report having around 25 columns(all are test boxes) in header section.Out of these 25, I can view only 10 columns in crystal reports design window. When I view the contents as 25% I can view all the columns. Now I want to add one new column almost at the end. How can I add it. As last section of report is not under white background (visible in design window) I'm not able to do any modifications to it.
    Please help....

    Please post questions related to using Crystal Reports on their
    forums.

  • Design Charts in Crystal Report

    Hi There
    I am wondering if i can design a chart in Crystal report with the data I define, for example, I have a report for each OS type I use running total to get their data, the reason I am using running total is because their calculation are different, so now i have a data like this
    Win        10
    HP          20
    Solaris   30
    now I want to use this data(the above data are get by running total) to draw a chart, is it possible?I am thinking to put those data in an array, but not sure if this can be done in CR?
    thanks

    You can do it. You can use a 'Shared Variable' in a formula and store the Value(s) of the 'Running Total'. you can create 3 shared variables in one formula or create 3 different formulas.Then use this shared variable in the sub-report and design the chart there in the sub-report. you might have to place this sub-report in the report footer or any section which comes after the 'running total' is calculated.

  • Standard Level of Effort for Universe design/development and Crystal Report

    Can any one please advise the standard level of effort to design and develop (excluding detailed testing) a Crystal report of
    a) Low Complexity =  __hrs
    b) Medium Complexity = ___hrs
    c) High Complexity = _________hrs
    Also the LoE for designing and builduing a universe(exluding detailed testing)
    a) Low Complexity = ___hrs
    b) Medium Complexity = ___hrs
    c) High Complexity = ____hrs
    Thank you in advance.

    Hi
    It depends on the person experience and expertise on the tool also it depends on understanding of business logic behind the report generation. A person, who is having intermediate knowledge he can develop report with below time lines.
    a)     Low Complexity = 2hrs
    b) Medium Complexity = 4_hrs
    c) High Complexity = ____8_____hrs
    Also the LoE for designing and builduing a universe(exluding detailed testing)
    a) Low Complexity = __2_hrs
    b) Medium Complexity = 5_hrs
    c) High Complexity = __10__hrs
    The above are tentetive work hours, again it depends on the logic and complexity of the design.
    Thanks,
    Sastry

  • Report Designer - Error when Loading Report

    Hi,
    We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
    Did anyone encounter this issue and is there a solution to this.
    Thanks
    Hemant

    Hello,
    Please go to SE38 -> RS_REPORT_MAINTAIN,
    Type your report name, and DT als "Report Type".
    Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
    Regards, Karol Kalisz, BI Development

  • Practical universe schema design for ad hoc reporting in web intelligence

    Hello Folks,
    I am in the initial design phase of creating a universe out of normalized tables in oracle database. This current set of table are outside our data warehouse methodology and work flows. The new Universe will be used for ad hoc query by limited users. There are about 25-30 tables with employee data/attributes (mostly HR data). Since these tables are all dimensions with employee information on various subjects like education,address, training,*employee records* etc, what should be my join strategy with the existing table schema? where is concept of fact table?. Would you suggest any denormalizing/derived or materialized view to get the right end results. Or do you see any ETL process required before starting this task? My main concern is configuring joins between the tables and performance issue due to many joins in the current physical model. Additionally, i am concerned with employee records component in the structure, as each record of an employee may have multiple event history. How would you handle such a situation (maybe create a seperate context with the main factless fact Employee table??)
    I will appreciate your insight and approach to tackle the initial planning phase of this project.
    Thanks

    ...due to the fact that with ad-hoc reports, the links, joins, cardinalities etc may differ from report to report depending on what each individual report would require.
    Cardinalities are part of the data model, they should not change based on report requirements.
    As far as the rest, yes, designing a flexible universe can be challenging. You have the option to set up different join paths (called contexts) for different functional areas, but in some cases it just makes sense to build more than one universe on top of the same data structures.
    For an example, consider a very simple case where there is a relationship between an employee and the company motor pool (collection of company cars). The HR person wants to see all people even if they don't have cars assigned to them, so they would require an outer join from Employee to Car. The motor pool manager wants to see all cars, even those that are not currently assigned to a person, so they would require an outer join from Car to Employee. These two requirements are contradictory, and so cannot be designed into a single universe. That's not a problem, it's simply something that needs to be recognized and responded to. An HR person is not likely to care about when the next oil change is due, and the motor pool manager probably does not care about the hire date for a particular person.
    Web Intelligence makes an excellent ad hoc query engine, but it does require some investment in a proper universe structure.

  • Designing Dimensional Model from Reports

    I'm currently desiging a data warehouse for our project. My problem is that we do not have access to the source system. The only thing we are provided with is the data feeds that are generated by the current reporting system. This is causing me a great deal of headach b/c reports do not give you an entire picture of what the source system. Since reports only display data based on how it is developed, it is difficult to come up with an efficient design. My question is has anyone designed a dimensional model using only Reports as the source?

    Hi there,
    The short answer to your question is 'no'
    A longer answer is 'Surely it is possible to get a copy of the source schema definition even if it is not possible to get access to the source system?'
    Stuart

  • Start SAP BW Query Designer button in Crystall Report is not find

    Hi all
    I installed Crystal Report 2008 SP1 and Integration Kit for SAP 3.1
    After Integration Kit installed, I see in SAP Menu have Start SAP BW Query Designer button
    But, when I update to Crystal Report SP2, I dont find Start SAP BW Query Designer button in SAP Menu
    Can I help me enable Start SAP BW Query Designer button
    Thanks

    Hi,
    the query designer can be started from the SAP BusinessExplorer menu items. the button has been removed from Crystal Reports
    Ingo

  • Query Design Strategies - servicing multiple reports from a single query

    I was wondering if anyone knew of any good web resrouces (articles and such) to assist with Query Design Strategies. What I am specifically looking to do is replace multiple reports from the previous system with just views of a single query. So I was looking at grouping the existing reports that we are replacing into queries and creating views for each report.
    The catch is that we will only be utilizing web reporting for report distribution, so we need to:
    1. Use views as DataProviders to web templates
    2. Broadcast views to users as links where they can see that particular view
    Is this possible and does anyone have some info on how to do this?

    Lets say that 10 broadcasted reports all could use the same query but each in a different navigational state.
    1. Can you navigate the query and save as a view and then set up a brodacast rule for that view?
    2. Can a DataProvider in a web template be a view?
    3. Can the BI Launcher iView take a view name in place of a query?
    <prt_protcl>://<prt_server>/<bi_launcher>?TEMPLATE=TEST1&QUERY=TEST2

Maybe you are looking for