Designer looking for Action Script/XML galleries

I am designer. I know XHTML and CSS3, but am really having lots of trouble learing Action Script and XML.
I need to create a photo gallery for a client and am looking for resources.
I will have to buy a pre-coded gallery and plug in my own photos. Looking for suggestions on where to look.
Thanks

you can use google to search for premade galleries: flash as3 photo gallery template.
if you want a custom made one, send me an email via my website: www.kglad.com

Similar Messages

Graphic Designer looking for a quick script

Hi all,
I've been doing a lot of searching and I just can't find it... I'm looking for a script to have Distiller open up .pdf files after it's done distilling. the .eps file. Is there a script that can do this?? Can anyone help me?

Here it is, a little clearer:
I create ads for a firm. We export from Quark as an .eps to an 'In' box. When Distiller sees a file in the 'In' box, it Distills it, using our press settings and creates a .pdf that it then puts in an 'Out' box. What I want the script(s) to do is:
1) open that .pdf file just after creation (so I can look at it right away and not forget to!)
2) highlight the 'Out' box so I can remember that there is a new proof to send out to our client
Any help is REALLY appreciated.

Looking for a script that get images' urls from a website

Hi,
I have a website where users can insert theirs hotel informations.
Most of them do not insert photos, I guess because the procedure is quite long and difficoult for the average user's skills.
I'm looking for a script that take as input the url of the website and give as output the urls of the images of the site, so the user can decide which to upload on his tab.
Someone can help me?

La_Salamandra wrote:
I have a website where users can insert theirs hotel informations.
Most of them do not insert photos, I guess because the procedure is quite long and difficoult for the average user's skills.
I'm looking for a script that take as input the url of the website and give as output the urls of the images of the site, so the user can decide which to upload on his tab.
Someone can help me?
You have to improve your design. Even if you can find the Coldfusion code, your design will still fall short in 2 ways.
First, it is unreliable, because you're depending on some arbitrary site to be available and up to speed. Secondly, it is aesthetically wrong to be collecting pictures, especially large numbers of them, dynamically from someone else's site. Think of their copyright and bandwidth.
Fortunately, there are simple solutions. First, identify, by eye, the web pages containing the pictures you're interested in. Ask for permission from the owner.
You could indeed use Coldfusion's cfhttp or any other script to download the JPGs, PNGs, and so on. But then, why waste your time re-inventing the wheel? It is infinitely better to use a web crawler !
With most crawlers, you only have to supply the URL of the site, and the file extensions it has to grab (in your case, jpg, png, bmp, and so on).
One click on the button, and you have them reeling in. Automatically. Some crawlers are considerate enough to enable you to adjust the download bandwidth. (We can learn from a million years evolution wisdom. The vampire bat is known to inject a painkiller before sucking!).
Now that you've downloaded the images to your site, the links you display to your users are all yours. You may choose to resize some of the images, display them as you wish, and the issues of reliability and bandwidth are now up to you.

I blog on TypePad using Word 2007 and documents freeze when I'm looking at them in Windows explorer; why do I get the error message that Mozilla is looking for a script?

I have now had two error messages - the first one looked for this script: Script: resource://gre/modules/XPCOMUtils.jsm:258. The second one (today) looked for Script: resource://gre/components/nsPrompter.js:68.
I have reset my word template, also reset word registry for data and options (as per Microsoft's help pages) for both those 'fixes' there was an initial improvement, but the problem happened again after I reposted on my blog today and then went to Windows explorer to view my files. It seems to 'seize' as I select a file, so that the preview does not appear (for up to 15-20mins).
I see on the internet using the second script as a search just now that one other has had a similar problem and one also since Mozilla 4 upgrade. My problems have also been pretty much since I upgraded.
It happens (apart from my fixes) every time I go to look at a word document via Windows explorer. Excel files are less affected.
One web suggestion is to clear the cache, but I am hesitant to lose all my passwords unless I have to.

I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

Looking for a script to automate renaming layer objects, not the layer itself!

Hey there everyone,
I was wondering if there is a possibility to create/have a script for an automated renaming of several named layer objects in Indesign (CS6).
The situation, I'm facing is a document for a templating process with at least 80 layers and sometimes some special elements on each layer. The naming of the layers is kind of repeating for each page that is used. The only difference is some prefix change in the layer name and/or the name of an element itself. My problem is, that I need to rename most of those layers AND elements in a same way and I'm looking for a script that asks me for the name of a layer or element (perfect would be just a part of the name to have multiple steps at once) and I have the chance to type in the desired value. It affects frames, graphical elements and text boxes.
If anyone has an idea, how to simplify this process I would be very glad to get some informations or advices.
Thanks in advance
Ralf

Here is a more descriptive version of the script above... :)
# Change "PSDrive" to PS1: (Sitecode)
CD PS1:
# Get all CMPackages to $CMPackages_All Variable
$CMPackages_All = Get-CMPackage
# Set the DP to use with. You may need to run it again with other DP just in case some Packages are missing...
$DPName_FQDN = "YourDP.Contoso.com" # Your FQDN DP name to reference from.
# Set folder to store *.pkgx files
$FilePath = "E:\_ESD\Prestage\" # FilePath
# For all CMPackages
foreach ($obj in $CMPackages_All) {
    $packageType = $obj.PackageType
    $packageID = $obj.PackageID
    $packageVendor = $obj.Manufacturer
    $packageName = $obj.Name
    $packageVersion = $obj.Version
    # Formulate File name based on Vendor Name, version and PackageID
$FileName = $FilePath + $packageVendor + "_" + $PackageName + "_" + $packageVersion + "_" + $packageID + ".pkgx"
    # Replace space with underscore
    $FileName = $FileName.Replace(" ","_")
    if ($PackageType -eq 0) {
        if (!( Test-Path $FileName)) { # This makes the package to skip if it is already created.
            Write-host "Publishing CMPrestage Content for $PackageID $PackageName to $FileName via $DPName_FQDN ..."
            Publish-CMPrestageContent -PackageID $packageID -DistributionPointName $DPName_FQDN -fileName $FileName -ErrorAction Continue
YPae

Batch export for action script?

Is there some way I can apply the Linkage>Export for
action script function to multiple items in the library at one
time?
Thanks.

if you can, you'll still need to give each an instance name
to refer to when using it.

Install gets stuck looking for /global/scripts/ac_media.js

My dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
Julie

My dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
Julie

Looking for a script which gives Drive,Diskspacefree,Databasename,Filename,Filetype,Filesize,Spaceused,spacefree,free(%),MaxsizeMB,autogrowthsize,Filegroup

Hi All,
I need a T-script for sql 2005 and 2008 which should give output as:
Looking for a script which gives Drive,Diskspacefree,Databasename,Filename,Filetype,Filesize,Spaceused,spacefree,free(%),MaxsizeMB,autogrowthsize,Filegroup

In the list below, everything that is in bold face is available in sys.master_files:
Drive
Diskspacefree,
Databasename
Filename
Filetype
Filesize
Spaceused,
spacefree,
free(%),
MaxsizeMB
autogrowthsize
Filegroup
Everything in bold face is in sys.master_files. Diskspacefree is also fairly simple; you can get it with xp_fixeddrives.
Filegroup requires you sys.filegroups in every database, although you can hardcode "PRIMARY" for the file_id = 1.
To get space used per file, it appears that you need to need to visit every database and run fileproperty(filename, 'SpaceUsed') to get the data.
You need to revisit the topics for the views and function I have listed here. xp_fixeddrives is undocumented, but the output is very simple to grasp.
Erland Sommarskog, SQL Server MVP, [email protected]

Looking for iTunes Script

I'm looking for a script that would remove ALL the album art from my songs. I've got so many mismatched album covers/art that it would be easier to start over from scratch than to go through all my songs one by one.
Thanks in advance,
Chris

You really don't need a script.
Select all songs (Command-A) and Get Info (command-I).
Tick the checkbox at 'Artwork' and click OK.
All embedded artwork will be removed.
To remove all downloaded artwork (from the iTunes Store), select all songs again, control-click on the selection and choose 'Clear Downloaded Artwork'.
Hope this helps.
M

Looking for a non XML driven Flash banner rotator

I am looking for a non XML driven Flash banner rotator, something where I can load my images into the FLA and publish. The only rotators I can seem to find have external XML/image files, etc.
All I want to do is create simple SWF's that I can use to display rotating images preferably is a smooth and stylish manner. Does anyone know of any, or could point me in the right direction?
Many thanks for any help you may be able to offer and I am willing to follow any tutorials.

Hi
I wonder why not show you how to use Quicktime.
Because I would use the html5 audio, that way the browser chooses the 'player' to use, and I wanted to give the OP the choice -
<audio controls preload="auto" autobuffer>
<source src="elvis.mp3" />
<source src="elvis.ogg" />

</audio>
PZ

Setting timeout settings for Action Scripts

We are using OIM 11gR1 along with the AD and Domino connectors. We are also using Action Scripts to perform some post create actions on the AD and Domino resources that get created by OIM. The action scripts are being invoked with the correct set of parameters and they do their job. However for both connectors, the connector server (Java connector server for Domino, .NET connector server for AD) times out when waiting for the script to complete. Our scripts are expected to take a long time (30+ seconds).
Based on our testing, the AD connector times out in 30 seconds, and the Domino connector times out in 20 seconds. You would get the below exception in your Java Connector Server log file:
Dec 4, 2013 2:36:41 PM org.identityconnectors.framework.api.operations.ScriptOnConnectorApiOp runScriptOnConnector
FINE: Exception:
java.lang.RuntimeException: Timeout waiting for action, process was terminated
    at org.identityconnectors.domino.WinJni._executeWinCommand(Native Method)
    at org.identityconnectors.domino.WinJni.executeWinCommand(WinJni.java:31)
    at org.identityconnectors.domino.ScriptOnConnector.executeCmdScript(ScriptOnConnector.java:143)
    at org.identityconnectors.domino.ScriptOnConnector.runScriptOnConnector(ScriptOnConnector.java:88)
    at org.identityconnectors.domino.DominoConnector.runScriptOnConnector(DominoConnector.java:316)
Is there any way to configure OIM so that it waits longer for the action script to complete. The real problem over here is that if 2 users are being provisioned to AD and/or Domino simultaneously (we use access policies to trigger provisioning rules), then the connector (Java or .NET) does NOT invoke the action script for the second user if the action script for the first user times out. It does however create AD/Domino resources for all applicable users. This in itself is a defect - but I need a workaround.
Looking at some old Sun Identity Manager documentation (which became Oracle Waveset), it seems that the entire OIM concept of action scripts has its origins in Sun Identity Manager/Oracle Waveset. And these products did support the notion of timeouts. Have a look at :
http://docs.oracle.com/cd/E19225-01/821-0092/bzbuc/index.html
Does anyone familiar with Oracle OIM code know if custom timeouts are supported by AD and Domino connectors?
Thanks
Aspi Engineer

Change the time for the below under 'Web Intelligence Processing Server'
Idle Document Timeout (seconds):
Idle Connection Timeout (minutes):
If you still have problem then try changing the web.xml under the following war files,
AdminTools
PartnerPlatformService
PerformanceManagement
PlatformServices

Recommendation for Action Script Text book?

I am looking for a good reference to a text book on Action Script, both 2 and 3.
(hard copy text, it is easier than having stacks of windows opened and sort through to find what I need)
Some of the questions that a good text would answer are:
1: How do I know what base classes to import into any given .as file to cover the functionality?
2: How linkage works and what I can apply it to.
for instance if I want to add an event listener, can I do stage.addEventListener(....etc)
when the class is linked to a movieClip. If I use this.addEventListener, it attaches the
event listener to the object to which the class is linked, right?
3: The feature sets that each version of Flash Player supports, as well as browser
   Flash plugins.
4: How to handle permission problems when attempting to send data via post to a server
   (if have been following an example and get errors regarding permissions when attempting
    to have action script send data about the Flash plugin the client is using).
5: How javascript in a pdf file differs from browser javascript where embedded Flash content
(in the pdf file) is concerned.
6: How to troubleshoot AS2 and AS3 linkage problems.
   (I have followed an exercise example in text I use, mentioned below, and have had the
result fail without errors. But I suspect there may be a difference between CS3 and CS4
that would account for this).
Initially, I have been generating at least 4 different versions of swf files for each version
of Flash Player back to v7. Javascript and server side code is used to determine which
version to load for the client requesting it.
Currently I am using the Adobe pdf manual and Lynda.com: 'ActionScript 3.0 for Adobe
Flash CS3 Professional Hands On Training', although I am using Flash CS4 Professional.
It is a starter text but not extensive into theory and practice.
I have done tons of Javascript and PHP programming (PHP on the server side).
It is better for me to have as much information and guidance in a text book than posting
to a forum for every problem I encounter.
Than you for advice and suggestions
ASJ

What Tiago said.
Here my list:
Essential Actionscript 3.0 by Colin Moock : http://oreilly.com/catalog/9780596526948/
Actionscript 3.0 Cookbook: http://www.oreilly.com/catalog/9780596526955/

Looking for a script to connect bodytext to footnote and cross-references

Hi,
Need to do the following:
I was provided with separate (tagged-text) files: bodytext, (foot)notes and cross-references. Now I am looking for a solution (script?) that can do the following:
to restore the connection between the body-text, the footnotes and te cross-references after placing these in a document in Indesign.
The cross-references should appear (in anchored text-frames) in the margin and the notes in a separate frame at the bottom of the page. If possible in the same way as footnotes in Indesign appear, but in a separate frame to be able to do some more formatting than native footnotes would accept.
I have tested the plugin: Side Heads from InTools, and tis works well with Indesign files tthat contain footnotes. But this doesn't work with separately placed footnotes from a tagged-text-file, as they re not knotted together.
I can't do any scripting myself.
I would appreciate any help, and I am looking forward to your response...
Regards,
kkingg

The first thing to do is:
regexp "match regexp = ([0-9]+)" $_cli_result match count
if $count eq 0
exit 0
end
The second is a bit more challenging. I think this will work:
cli command "show call active voice br"
foreach line $_cli_result "\n"
regexp "^([0-9a-zA-Z]+) : " $line match callid
if $_regexp_result eq 1
continue
end
regexp "^dur 1d" $line
if $_regexp_result eq 1
cli command "show call active voice br | section $callid"
syslog msg "$_cli_result"
end
end

Looking for a script like Link Optimiser

I'm looking, very unsuccessfully, for a script that will Resize all the images in my document to 100% - this script also had the option to open the image in photoshop and sharpen it.
I had it a few years ago but can't seem to find it now. Any ideas?

I have one in development...opens the image in photoshop with the crop from ID. (does not sharpen or save)
Getting it ready for public release is on my queue for this month, but I'll send it to you privately for now.

Looking for com.sun.xml.tree package

Hi,
I�m looking for a jar which contains the XmlDocument class to download.
I found the package, (it�s com.sun.xml.tree) but I cannot find where the package/jar is to download it.
Your help will be much appreciated.
Thank you,
Chris

I have all latest jars (jaxp, xerces, xalan, jdom, dom4j and any related jars). I have w3c DOM and i have been trying to convert it to JDOM and dom4j using relevant APIs. i keep getting following error.
Exception in thread "main" java.lang.AbstractMethodError: com.sun.xml.tree.Eleme
ntNode.getNamespaceURI()Ljava/lang/String;
at org.dom4j.io.DOMReader.readElement(DOMReader.java:181)
at org.dom4j.io.DOMReader.readTree(DOMReader.java:106)
at org.dom4j.io.DOMReader.read(DOMReader.java:88)
Can you advise what could be the reason and how to resolve this?
FYI : my w3c DOM has been created with com.sun.xml.tree.XmlDocumentBuilder class and other methods of the package. I need to resolve this error at earliest to move forward.
I would apprecaite early response at [email protected]
Thanks,

Designer looking for Action Script/XML galleries

Similar Messages

Maybe you are looking for