Designer6i Installation Problem on P4 with Win2000
I get following error and installation aborts:
cgenrx61.map(0): FILE_NOT_FOUND while
mapping cgenrx61
Does anyone know what is happening here?
Thanks,
Tony
To install 8i on a P4 you to search for a patch in metalink to substitute the Instalation Product Program.
I already have the same problem and I solve it with this patch.
Best Regards Can anyone list this link? Oracle's search engine stinks! I couldn't find any documentation on the P4 installation issue on the site.
Similar Messages
-
Oracle10g Installation problem on Linux with DHCP IP
Hi,
I am new to Oracle Products, I have tried to install Oracle 10G on Linux with DHCP IP.
I got the following warning while installing even though I have loopback interface configured.
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Please help me in resolving this problem or Can I ignore this message?
My Server Configurations:
[root@SQAESMRH5 Oracle_Install_Errors]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3F:79:FA:2C
inet addr:10.10.121.61 Bcast:10.10.121.2 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fe79:fa2c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20751998 errors:0 dropped:0 overruns:0 frame:0
TX packets:19278549 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2150795393 (2.0 GiB) TX bytes:438232502 (417.9 MiB)
Interrupt:177
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12383146 errors:0 dropped:0 overruns:0 frame:0
TX packets:12383146 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1965045834 (1.8 GiB) TX bytes:1965045834 (1.8 GiB)
[root@SQAESMRH5 Oracle_Install_Errors]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
#::1 localhost6.localdomain6 localhost6
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost6
[root@SQAESMRH5 Oracle_Install_Errors]#This warning means it is not recommended to install Oracle 10g on a DHCP assigned IP address. It could work, but you won't be able to configure Enterprise Manager, since this tool requires a fixed IP address. If possible, have the IP address fixed.
~ Madrid
http://hrivera99.blogspot.com/ -
Installation Problem on Pentium4 with ORACLE 8.1.7 Client
I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[NT base].
Thanks in advanceIs the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle -
Win XP Installation problem on System with KT880 DELTA FSR
WHen I try install win xp with sp2 included, installation fails in about 19 minute to end in graphical part of installation.
when installation crashes i see only blue screen with
IRQL_NOT_LESS_OR_EQUAL
configuration is here
CyberCase CY 229 ATX se zdrojem 400W
MB MSI KT880 Delta FSR
CPU Athlon XP 2800+ Barton BOX
DIMM 512 CL 2.5 8x32 Apacer
GPU Sapphire Radeon 9600
FDD ALPS 3.5"
HDD WD 80GB IDE on IDE 1
DVD RW LG GSA 4160B Dual on IDE 2
I tried in BIOS agp 4x, vlink and fastwrite disabled, etc..
Help please ..You can test the memory by downloading this program,
http://www.memtest.org/download/1.40/memtest86+-1.40.floppy.zip
Creates a bootdisk which you must boot from. (Disk cannot be read in windows)
If the PSU cannot provide enough power then running the memory at a lower frequency can help, as 333Mhz uses less power than 400Mhz.
Test the memory at 333Mhz and see if you get any errors, maybe ask a friend to run the memory at 400Mhz with memtest.
If it does run at 400Mhz (200Mhz) without any errors then it is not faulty.
From this point forward you will always test any memory modules that you buy with memtest.
It is a very useful program. -
UTL_SMTP Installation Problem, Package Created with errors
Hi Forum Friend!
I tried to Install UTL_SMTP Package in my Oracle8 Release 8.0.6.1.0. A friend of mine sent me the UtLSMTP.SQL Script and I run from SQL+ connected as SYS. When I check the Package by the Oracle Schema Manager I Notice that UTL_SMTP has errors so the package will not run successfully. The Errors are the following:
PLS-00103: Encountered the symbol "CONNECTION" when expecting one of the following:
:= . ) , @ % default character
The symbol ":=" was substituted for "CONNECTION" to continue.
I have no Idea how to handle this error. I tried to install the Package in my Developing Database But the Production Database is in HPUX(Unix). Could you please send me some recommendation to solve this issue and start executing the package!
Best Regards
Emmanuel Carrillo Trejos
P.D. LNB, Republic of Panama (Central America).Dear Friends
Well, I think that my Database version is too old to use this package. I think that one time looking for this topic I found something relating sending email using a Host call(I think that using Mail Command from Unix) Does anybody has and Idea how to do it?. Thanks for your time colleagues!
Best Regards
Emmanuel Carrillo Trejos
LNB, Panamà. -
8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System
Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY -
HP3054 Printer installation problem with v10.7.2
When I try to install my HP3054 printer, it says, the installer is not compatible with my operating system (10.7.2). Can I download an updated installer? The printer CD says it only supports v10.5 and v10.6. I got the printer from the Apple store when I bought my MacBook. Any suggestions? Thank you!
Strange, but yesterday I nter in Oracle9i install, open
gnome-terminal window as oracle user and simply type
/tmp/Disk1/runInstaler
the DISPLAY enviroment variable was set,
using RedHat 7.2 , kernel 2.4.16-0.9, glibc-2.2.4-19
Segmentation violation 11 may mean RAM problem, sometimes
incorrect program pointer.So I think it must work (runIstaler) -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Crs installation problem in oracle 10g rac with NAS storage
Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
MugunthAlso you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian -
Flash Player installation problems with Windows Embedded (WES/XPe)
I've deployed 13 HP T5740 Thin Clients at my office, each have Windows Embedded Standard (WES/XPe) and with Internet Explorer 7.
With limitations on VMWare servers and sound, users need to view webinars on their local client. When I try to install any version of Adobe Flash Player, the installation instantly fails...no reason given.
Is there a known issue with this? And is there a workaround?
Thanks,
JeffIt's not working at the mo and it says under run without permissions - Shockwave Flash Object Enabled version 0.0.0.1
Just tried to download version 10.2.153.1 and now the download manager opens but then just 'hangs' - nothing happens.
On Firefox, version 10.2.153.1 installed and enabled OK. No problem playing clips with Firefox. -
Windows installation problem with Bootcamp
Since a few days I have a new iMac 21,5 (end 2013) Maverick latest version installed as I had on my "old iMac" I tried to instal Windows 8 or Windows 7.
Use the bootcamp and set the right size for my windows part, and download the drivers all goes well. After the iMac reboot comes up with the setup from Windows
ask the keyboard settings and than shows the partitions. Select partition 4:BOOTCAMP. Here starts the problem, I do not see the advance drive options, as also the "NEXT" button is not selectable. As I format the partion also "NEXT" button is not selectable. I am stuck here, please help :-)I got stuck with the same error and spent a long time trying to work this out. It turns out that the issue is your USB3 stick. I'm not sure how it gets so far into the installation, but it seems that the USB3 drivers aren't available to the Windows installer.
Try again with a USB2-only drive and you should find that Windows will install fine. -
HT4623 How can i solve installation problem with iOS 6.
How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!
can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs -
Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Software Installation Problems with Media Source and Nomad Explo
Hello Creative Users,
recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
As long as I was running the software on my previous installation everything worked fine.
I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
Can someone help me as synchronizing with Musicmatch is a pain.
Thanks
RolfHi everyone,
as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
properties.
Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
Now you should be ok and able to install.
Regards
Rolf
Maybe you are looking for
-
Unable to assign all security roles to a user with a new custom security role
Dear All, Happy New Year.! I have a query regarding the assignment of Security Roles to new users in CRM. Normally we assign the security roles to new users via an Admin user who has 'System Administrator' security role assigned to him/her. This work
-
HP w2207 Monitor - "No Video Signal" After Power Outage
My mother has a Mac Mini - 2009 model - that I bought her. It is connected to an HP w2207 monitor I used to have with a mini-display port to DVI [I think, either that or VGA] adaptor. She lives 2 1/2 hours away. Last week there was a power outage and
-
Will PC DVD iTunes Backup Discs work in MacBookPro (PC to MAC transfer)?
The question is simple, I hope the answer is too. I plan on buying a new MacBookPro (MBP)shortly and want to transfer my music from my PC to the Mac. My library isn't that big and I can burn it to several (8) DVD's if I have to. The question is, will
-
So my Psychotic now Ex-Boyfriend locked my Macbook Pro using " Find my iPhone"
I need to ask how to get my Macbook unlocked. My now Ex-Boyfriend decided since I broke up with him, it was a good idea to Hijack my Macbook Pro and lock it with the 4 digit pin number. I just got to my mothers house and I am now trying to figure out
-
Switching ON validate xml(Schema Validation) in BPEL Console for AIAtesting
While we were testing Oracle O2B pip, we have recently switched on schema validation by turning it on to 'Strict' so that we can Validate XML in BPEL Console. Earlier when we were testing we had turned the schema validation as 'None' on BPEL console,