Designing Screen in RFID device

Hello All,
We need to built a small screen in RF device with 4-5 fields with SAP console. Could someone please let me know the rough cut efforts estimates required for the same?
Thanks and regards,
Chishre.

hi
you would need to develop module pool program to achieve your objective.
Later you can configure the sap console and the default web service through IIS server on your computer
Once this is done you have to configure your RF device in the same network as the PC is in.
In the RF device you can use the browser to call the transaction you developed.
regards

Similar Messages

How to set a background image to fill the entire screen on any device in a spark mobile application

Hi,
I started developing a mobile application with Flex.
I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me.
I'm using a TabbedViewNavigatorApplication and i need to set some background images on views.
I need my image to fill the entire screen on any device. i don't need to mantain image aspect ratio, just need it to be fullscreen. This seemed to work when setting a custom skin on the TabbedViewNavigatorApplication, however this blocked all my views for some reason and all components contained in view became invisible.
Can you please tell me how can i achieve this?
Kind regards,
Dan

Basically you need a larger image which can accommodate any device. The trick is to show only what each device can display, so therefore some clipping will occur based on device. Have something centered and towards margins have a gradient or just plane colors that way the stuff in the middle will be visible on every device while nobody will care if you are clipping from the color fill.
C

HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Error message on screen: No bootable device -- insert boot disk and press any key comes on

Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive.

My screen says boot device not found. Please install an operating system on hard drive,

My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
3. Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT204074 ccount Information screen, click Manage Devices...that step is missing on my page view

Account Information screen, click Manage Devices...that step is missing on my page view
in other words i dont see manage Devices when logged into my account on the itunes store through itunes

Bump.
All I see is a table with the following:
Apple ID Summary:
     <info>
iTunes in the Cloud:
     <options>
Purchase History:
     <see all>
Ping
     <turn off| on>
Settings
     <settings>
Please state where there is a button (if there is)

Is there a way to view the code screen and the design screen in separate windows

Is there a way to view the code screen and the design screen in separate windows instead of connected. I would like to have the code on one monitor and the design on another

You can open the Code Inspector Window to have the code completely separate from the Design/Document window. You can also then move the CI window to a separate monitor if you like.
Window > Code Inspector or F10

Configuration details for RFID devices in warehouse while delivery

Please suggest me some configuration details for RFID devices in warehouse while delivery .
Regards,
Manish

I read the "Config" in "– Once the Non-Cisco Devices are moved to the managed state, it triggers the MIB II level of Inventory for Inventory, Config and Image Management support and data collection." as "config management", meaning any retrieval of configuration informations possible through polling MIB II.
OTOH, the "Config" in "– Config and SWIM functionalities are not supported. Only system and interface information (MIB II) is collected for Non-Cisco devices through Inventory." is probably referring to the act of deploying/pushing configurations to these non-Cisco devices.

Dreamweaver design screen turns black in live

How do I fix My Dreamweaver CC 2014 Design Screen when it turns black in Live Mode?

Hi Subhadeep,
The problem was in my script file. I commented it out and then it worked.
Thank you for trying to help me.
David
On Wed, Sep 3, 2014 at 5:25 AM, subhadeep_banerjee <[email protected]

Design screen blacked out

Morning All
Have had no luck finding posts about this: my design screen in crystal reports XI is blacked out and I cannot see the firleds or anything I have previously placed there.
It is like this with all my previously developed and new reports. The preview screen is fine.
Any assitsance would be much appreciate.
C

Thanks. A colleague was able to assist. The report options 'Grid' setting was on making the design screen appear densely coloured.

Can't activation, in the screen show message device unknown

hi all,
i have iphone 5 but can't use because activation error.
my iphone 5 now installed ios 7.0.2 but can't activation, in the screen show message device unknown. please help.
thanks

Meanwhile I solved the problem myself: the layout screen had sunk to the bottom, just had to pull it up.

RFID Device Controller

Hi,
We are going to do RFID scenario using SAP AutoId 5.1.
From the below link, I came to know that SAP collaborates with selected vendors for the RFID Device Controller.
http://help.sap.com/autoid20/helpdata/en/e8/1f0d40c04af72ee10000000a1550b0/content.htm
Could you please provide the Vendor details, so that we can proceed further without any issues.
Regards
Sara

Hi Sara,
Please see below the list of SAP partners in RFID scenarios (Device Controllers). You can make your selection based on your requirement.
http://www.sap.com/ecosystem/customers/directories/ProductSearchResults.epx?context=21B87D61C0F646A22B2A6DB254A010CA8C9C141B7529F02972463D54EC8217D707ADFB1B61328B27A6200891D1824987C4A2286C415FA5583A680E633FB258D6F702338D4AE86843C5ADEB30E7160581899BB4603C9793EC%7c787FF080280C2EEE1AA9326DB062E8C1144A5BBD02A24B6BA3C0ED4C1709111B2B7ABC40EBA6F51C34BD28EB51C1D65A4564026B9F00F5D087D0CCFBF3C36C8E46BB8D9B8446B82DFD62BCF9E3B113D49011C33B05762C5A864A2BB300E1B7230754493DACD0416D5A6A37AB1B5AB1C2
Few of the Device Management partners are:
Acsis, Peak, Nofilis, Reva, Blue Vector, Systech, Insynch etc...
Hope it helps
-Vikas

After the update, the screen inscription "unknown device"

after the update, the screen inscription "unknown device"

If movies/TV/Music colums are no there AppleTV is not connected to the internet or at least thinks it isn't.
Being able to access Shared libarries means you have a LAN connection active but not necessarily internet.
I assume Photos are streaming from computer - if you can access Photostream photos however that would suggest internet connectivity.
First things to do are unpower and restart the router and AppleTV and see if menu items come back or now work.

Doubt: Cloud studio UI designer Screen

Hi All,
Cloud Studio doc says... 5.7.1 Business Object Modeling.
Changes to the business object may require corrections to scripts, UI screens, forms, and so on. Therefore,
when developing an cloud solution, we recommend that you complete the business object design as far as
possible before proceeding...
I'm working on SAP CLOUD STUDIO and new to it, working on a Custom solution, by clicking on the preview we will see the screen with all the elements we created in business object and designed in the UI component, on the top we will see 'IMPLEMENTATION PROJECT NOT YET LIVE'. then for every changes we made in the business object and activate, the changes will not replicate to the designer screen, so we are deleting all the UI Components for that business object and again creating the screen for our business object then we need to design all the elements by clicking on the designer tab at bottom. If our solution is already deployed and is on live, then we can understand the changes we made in the business object will effect the live screen of the solution, but as we in the development of the solution which is not live, is there any way to over come this part with out recreating the screen for the changes made to the business object.
Thanks in advance..
Best Regards
Bandhav

Hi,
How the below form will be created with left pane having the read only functionality, right pane with object value selector. I created the form pane with additional list pane and trying to add the row names for the left side, can any one give the steps to complete this form.
Date particulars
On Date
Start date
In process date
End date

Couldnt add an Element within VC Design screen area

Hi,
I'm not able to place any elements (iviews,page, or comments) on the design area once i've created the Model.
The Add Element screen area is empty so there's no way to
drag & drop these.
Please advice what might be wrong.
Thanks
Gk

Hello Deep,
I figured out the problem. I didnt install Adobe SVG Viewer 3.0 on the client machine, once i had installed
the same i could see the contents in the 'Add Element'
screen area. Anyways thanks for the reply. I'll reward
2 points for the same. By any chance do you know
the reason behind why i couldnt view any data in the table
view preview screen. following is what i did:
a) Dragged a Table inside the design screen area
b) Dragged a query inside the table area,
   at this point system displayed message 'Retrieving meta
   data info'
c) after this tried to do the preview , there was no data
   neither fields that was displayed.
Rgds

Designing Screen in RFID device

Similar Messages

Maybe you are looking for