Designing table in Adobe
Hi,
I tried to design adobe in table format to get values from my context.but im getting only a single value.can any one please tell me how to get all row values in to my adobe.
Regards,
Divya
Hi Divya,
In my article below, I have also displayed a table inside the Adobe form.
Step 7 in the article is especially useful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/98a2c8a5-0701-0010-e8a5-df1b783e9c1a
Regards,
Sangeeta
Similar Messages
-
Issues with Nested Tables and Adobe Designer
Hi,
I have some strange issues when I am trying to create a nested dynamic table with SAP DATA in Adobe Designer.
My Outer Table has article items and in this table I got a nested charges. For instance the table contains this data:
DATA
|->Article1
|--->charge111
|--->charge211
|
|->Article2
|--->charge122
|--->charge222
Now I am trying to display the data in a Adobe Designer table. But if I create a table with a row article and a repeating row charge all charges will be displayed under the first Article.
This is the result:
DATA
|->Article1
|--->charge111
|--->charge211
|--->charge122
|--->charge222
|
|->Article2
How can I solve this issue? I tried to select data binding on charges like article.DATA.charges.DATA[*] but this don't work.
Anyone an idea?Alex,
Is it print based form or interactvie form.
ABAP
If it is printbased form and if you are designing from SFP, you can use the following solution.
You have to create a nested table in the context as below.
say Table1-> Article ( fields: ARTICLENAME,....other fields) info Table2->cost info(fields:ARTICLENAME,Charge...,other fields).
The 2 tables should contains data as beow.
Table1 data.
1row->Article1 -.....other values.
2row->Article2 -.....other values.
3row->Article3 -.....other values.
Table2 data.
1row->Article1 -Charge11 .....other values.
2row->Article1 -Charge12 .....other values.
3row->Article1 -Charge13 .....other values.
4row->Article2 -Charge21 .....other values.
5row->Article2 -Charge22 .....other values.
6row->Article2 -Charge23 .....other values.
7row->Article3 -Charge31 .....other values.
8row->Article3 -Charge32 .....other values.
9row->Article3 -Charge33 .....other values.
In the context drag table2 into the table1 and define where clause on ARTICLENAME.
In the layout drag nested table in the body page and make alignments.
If your requirement is interactive, may be you can use the similar logic. -
Looping through table in ADOBE TABLE...HOW?
Hi,
I'm having a problem with writing scripts on looping through a dynamic table in adobe and disabling certain cell in the table.
can some one write me the script to help me out...please.... here is my email add. [email protected]
Regards,
VinodHi Denise
You can use tableView for this which is available in htmlb.
There is a attribute in tableView called visibleRowCount.
The integer value that u give for this attribute , only that number of rows will be visible on your BSP page.
This is the sample code :
<htmlb:tableView id = "tb1"
headerText = "Communication"
headerVisible = "true"
design = "alternating"
visibleRowCount = "4"
fillUpEmptyRows = "true"
table = "<%= itab %>" >
<htmlb:tableViewColumn
columnName = "CURRENT_STATE"
title = "CURRENT STATE"
edit = "TRUE" />
. </htmlb:tableView>
Here tableview id and table is mandotory field.
Give as many tableViewColumn as u have column in your internal table ( Here CURRENT_STATE is the name of the Column that I have in my internal table).
Here visibleRowCount is 5, so only 5 rows will be visible at a time .For other entries u have to click on
my click handler which is like a footer in a tableView, and next 5 entries will become visible and like that.
Before implementing this, fill your internal table
in OnCreate in Flow logic ( in do_init in case of MVC). -
I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.
In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others. -
How to use nested tables in adobe form
Hi All,
I have to use nested tables in adobe form for table display. I have used Subforms for displaying table data. I have changed accessibility of the subforms. Currently i am able to print print the table correctly if there is single material record in table 1 and single corresponding record in table 2. But the requirement is that i will have multiple lines in table 1 for single material and only one record in table 2.
EX: form is for Sales order. in line items if the order is for 100 units then we if we have delivered material as 80, 10, 10, then table 1 will have 3 lines for this. Table 2 will always have only 1 corresponding record.
item--materialdescription-ordered qty--delivered qty--delivery date-price
xxx--xxxxxxx-xxxxxxxxx-10080xxxxxxxxxx-xxxx
10----
xxxxxxxxxx
10----
xxxxxxxxxx
yyyyyyyyyyyyyyyyyyy------yyyyyyyyyyyyyyyyyyyyy
xxxxxx is table 1 and will have multiple lines
yyyyyy is table 2 and will have only 1 entry for item xxx
and this group will be repeate as per no of items. table 1 can have any no of lines per item.
I am currently able to display 1 line for table 1 and 1 line for table 2.
But how to show multiple lines for table 1 and 1 line for table 2.HI,
Set the body page as flowed and set the tables also flowed.
go to bodypage>object->subform-->select flowed option.
I thihnk this will work..if u are getting all the records properly into the tables 1 and 2.
Thanks,
Mahdukar -
How do I get to have more than 20 columns in a table in adobe form?
I see that there is limitaion to not have more than 20 columns in my table in adobe form, Is there any way I can have more than 20 columns in a table in adobe form in landscape mode.
Hi,
That only relates to the Table Wizard. Once the table is placed on the page, you can add columns manually, from the menu or right-clicking on a column.
You can also use fields within a repeating subform (instead of the table object).
Good luck,
Niall -
Merging of cells of a dynamic table in adobe form
Hi,
I am trying to Merge 2 columns in a dynamic table in adobe form.The requirement is to merge column 3 and column 4 if column 4 is empty. I used the below javascript code in both "Form ready " and Initialize event of the row.
if (this.Cell4.rawValue == " ")
this.Cell3.colSpan = "2";
this.Cell4.presence = "hidden";
Note : Since above code was not working , i used the below code in my subform also but it did not returned desired output.
if(Table22.Row1.Cell1.rawValue == " ")
Table22.Row1.Cell3.colSpan = "2";
Table22.Row1.Cell4.presence = "hidden";
The problem is that in my dynamic table , its the second row where the requirement is fulfilled ie in the 2nd entry of my table the column4 is blank (the exact row number might change depending on input data).
is there a way to loop in the dynamic table and check if column 4 is empty for a particular row.
the above code does not help to fulfill my requirements. kindly help.
Thanks
AditiHello Aditi priya,
Hope you are doing good..
Please go through my recent blog..
http://scn.sap.com/community/interactive-forms-by-adobe/blog/2015/01/02/merging-internal-table-cells-dynamically-in-sap-adobe-forms-using-java-script-code
I hope you will find all answers from this blog..Reward if helpful...
Thanks & Regards,
B Raghu Prasad -
Problem with table in Adobe Form in Web Dynpro JAVA??
Hello all,
I have an issue with the table displaying all the node values in the Adove Form. Right now it displays only the first element of the Node even if there are multiple entries.
Not sure what is going wrong here.
How is the table created in a interactive form? Any help is appreciated.
Thank you, JohnSiva,
I referred to the website, but still having issues with generating tables in Adobe Form. I can get all the table rows in the adove form, but the pdf doee not add new pages to display all the table rows. It just createa one page with the table inside it, display few of the rows and truncates rest of the table data.
Here is the heirarchy of the page with the properties set
Master Pages ---
||--> Page 1
||--> content area
||--> subfrom (properties:: Content - Flowed / Flow direction - top to bottom...pagination tab is greayed out completly)
||--> Table
||--> HeaderRows (Object: Row - Type: Header Row)
||--> Row1 (Object Tab/Binding: Repeat Row for each data item - checked)
Can't make it wor, not sure what's wrong here
I am using NDS 7.0 SP18 and Adobe LiveCycle 8.0. Does that could be a problem.
Appreciate your help
John -
How do I access LiveCycle Designer from my Adobe Acrobat X Pro?
I am unable to access LifeCycle ES2 from my Adobe Acrobat X pro, even though I am supposed to have it as part of the software. I have tried Forms/Edit forms, and I have looked for it through all the menus. Several of the helps I have found for other things has me launch LifeCycle and operate from screens that LifeCycle designer provides.
I am using Windows XP professional.
I would appreciate all the help I can get on this.
Thanks
Mogadeet43512This worked! I had to go into the system and launch it from the Designer
9.0 folder, but thanks to your instructions I now have use of it.
Thank You!
Joe
TundraSteve <[email protected]>
09/28/2012 10:00 AM
Please respond to
[email protected]
To
Mogadeet43512 <[email protected]>
cc
Subject
How do I access LiveCycle Designer from my Adobe
Acrobat X Pro?
Re: How do I access LiveCycle Designer from my Adobe Acrobat X Pro?
created by TundraSteve in LiveCycle Designer - View the full discussion
There is a terminology issue here. From Acrobat Pro X you launch Designer
not LiveCycle ES2. LiveCycle is a server product.
When you install Acrobat you have the option to install or not install
Designer. Look in the folder C:\Program Files (x86)\Adobe\Acrobat 10.0
and check to see if there is a Designer 9.0 folder. When in Acrobat you
should be able to create a new form and it will prompt if you want to use
Designer. If all else fails you can always go into the Designer 9.0
folder and launch FormDesigner.exe
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in
the forum to embed the image at
http://forums.adobe.com/message/4734785#4734785
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4734785#4734785]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4734785#4734785]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in LiveCycle Designer by email or at Adobe
Community
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
Restricting visibility of table in Adobe form in WdJava when node is empty.
Dear Experts,
We have a requirement for Formcalc or Javascript code for making the table on adobe form invisible when the node corresponding for the table in the form is empty.
Please suggest ASAP. Thanks in advance.
Regards,
Mahesh.Hi
In the table's layout ready event write the following.
//formCalc
if(data.Page.<table>.<Row1>.<field>.rawValue == null or data.Page.<table>.<Row1>.<field>.rawValue == "" ) then
$.presence = "hidden"
//this.presence = "hidden"
endif
Kind Regards
Mukesh
Edited by: Mukesh mani on Nov 23, 2009 1:26 PM -
Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2. make it possible for them to download it via a link on our website 3. make it possible for them to save the info they have written into the form and mail it to the mail we have supplied in the entry form and 4. make it possible for them to put in a jpg. as part of the entry for and lastly 5. make it possible for us to copy paste the document and use it on other platforms. How do I do this - is it at all possible with adobe?
Those requirements are go way beyond what PDF forms can do and are meant for, some of them would require involving other programs or are mutually exclusive and contradictory. You are wasting your time even thinking about doing this as an "offline" PDF form. Simply sign up for an online forms/ survey service like FormsCentral or Surveymonkey.
Mylenium -
Designing table for client/server situation ....
I am designing table that will be accessed by concurrent users. It's structure is given below:
AccountID number(30) Primary Key
AccountName text(50)
I have a sequence named: "seqAccID" which increments AccountID and stores new ID.
I want to know what changes must be done in the table so that if concurrent users are creating entering in the same table and press enter at the same time there is no possibility of error: "Primary Key violation".I have a sequence named: "seqAccID" which increments
AccountID and stores new ID.
I want to know what changes must be done in the table
so that if concurrent users are creating entering in
the same table and press enter at the same time there
is no possibility of error: "Primary Key violation".You don't need anything, sequences guarantee the uniqueness (that's their purpose). See http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#sthref883
If you use your own counter instead, then the For Update suggestion is correct. -
Hi All,
I want to know is there any work around to create a Hierarchical table in Adobe Interactive Forms?I need 2 levels of hierarchy(means 2 master columns in a single table)
regards
Sumithi Sumit...
This might be helpful for you... See this PDF file URL;
If it will be helpful for you means reward some points...
<b>
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c29a4d25-0c01-0010-50ae-e69d0e1c61f3</b>
Urs GS -
Ever used the Designer Table API (TAPI) with object type in the DB?
Hi all,
We are trying to generate the Oracle Designer table API of a table that has a column defined by an object type. It works without problems if that column always has a value (is instantiated in object term). The problem is when we update a row where the column is null (all attributes of the object are null thus the object is not instantiated).
The "before update row" trigger of the Table API fails with error "ora-30625-method dispath on NULL SELF argument is disallowed".
The code that fails is the following:
cg$ind.TFO_DESCRIPTION :=(:new.TFO_DESCRIPTION IS NULL AND :old.TFO_DESCRIPTION IS NOT NULL )
OR (:new.TFO_DESCRIPTION IS NOT NULL AND :old.TFO_DESCRIPTION IS NULL)
OR NOT(:new.TFO_DESCRIPTION = :old.TFO_DESCRIPTION) ;
In this example, cg$ind.TFO_DESCRIPTION is a boolean and the TFO_DESCRIPTION column is based on an object type.
Thanks for any feedback or suggestionsFor a solution to this problem: I set down to write a relatively simple and small piece of code that we can use as post compiler or post generator. After we generated one or more TAPIs, we can run this post compiler to remedy the problem the TAPI has with Merge operations. The post compiler will fix the PL/SQL inside the database. It reads the TAPI objects using dbms_metadata, makes the simple change by manipulating the PL/SQL source and then recreates the objects using execute immediate. Using this post compiler, it takes but a few seconds to fix the merge flaw in all TAPIs in your application.
http://technology.amis.nl/blog/index.php?p=842 -
Printing data from table in Adobe Form.
Hi all,
How can i print all data from my internal table in adobe form.currently only last record from table is getting printed.i have put my table is in sub form and content i have made 'Flowed'. is there anything else i have to do to make all data from my internal table appear.
Thanks & Regards,
Anjana RaoHI Nimesh,
This looks ok and works well, but the problem is its not printing the header data, all the headings its leaving that place as blank. Do you have any suggestion for this. This is the code is used.
DATA: pgm LIKE sy-repid,
tc TYPE cxtab_control.
pgm = sy-repid.
tc = tab.
CALL FUNCTION 'FITRV_PRINT_TABLE_CONTROL_DATA'
EXPORTING
TABLE_CONTROL = tc
CALLBACK_PROGRAM = pgm
CALLBACK_TOP_OF_LIST = 'TABLE_TOP_OF_LIST'
CALLBACK_TOP_OF_PAGE =
CALLBACK_END_OF_PAGE =
CALLBACK_END_OF_LIST =
OPTIMIZE_COLUMN_WIDTH = 'X'
GET_CURR_QUAN_FIELDS_FROM_DDIC = 'X'
WINDOW_TITLE = 'PRINT TABLE'
PRINT_IMMEDIATELY = 'X'
TABLES
PRINT_DATA = ITAB
EXCEPTIONS
COLUMN_INFORMATION_MISSING = 1
PRINTING_NOT_POSSIBLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Venkat
Maybe you are looking for
-
I have 3 phones on one apple ID. I want to remove my phone which is the main phone on the acct to it's own apple ID. How can I do that but keep the other 2 on the current ID
-
Upgrade from Windows Home Server 2011
Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials? Wil
-
Purchase Order deleted by mistake
Hi all, We have a purchase order that was deleted by accident. We we wanted to remove one of the line items and it set the whole purchse order for deletion. Is there a way to undelete a purchase order? Thanks all for your help and let me know if I
-
Crackling Sennheiser PX 210 Bluetooth with MBA 11
I have a problem using bluetooth headphones, namely the very nice Sennheiser PX 210 BT. They work amazingly with my iPhone with superb sound quality and no jumps or glitches but with the MBA 11 they slowly start to degrade over 10 minutes, with the s
-
How can i copy the screen of a website to a file every 15 seconds
pe this site: http://www.beleggen.nl/aex?gclid=CIPKy_S8nL4CFWvkwgod9VMA4w append this quote and time to file every 15 seconds Thanks Peter maljers