Designjet 450c driver with all colors needed

Hello Bob and all others,
I have been also looking for driver to my designjet 450c . I use win7 x64 .
It looks that driver ( hpdj430x64glen ) prints only grayscale pictures.
How could I change it to support all colors. It doesnt give option at anywhere on settings.
Many thanks,
aclarke69 wrote:
Thanks Bob. I followed the instructions to the T on my Vista machine. When I got to step 7 and clicked "Okay", the following message appeared: The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems.
The only thing I can think of is the driver is not made for an x-64 based system.
Oops - it was a critical piece of information missing there, that you are using an x64 system. You will need the x64 version of the driver, which I have never found.
Edit - I do not know how I missed this one, it shoud install on your x64 system. Download the driver here. The drivers installed fine on my Windows 7 x64 system.
Message Edited by Bob_Headrick on 12-02-2009 06:33 PM
Click the 'Star' to say Thanks!
Bob Headrick, Microsoft MVP Printing/Imaging

download and install it its for windows 7 64 and vista 64
http://www.mediafire.com/?r3mogwejgvo
Oooo and its free

Similar Messages

My hard drive with all my actual music files died. how can I transfer the music on my ipod classic to another drive?

my hard drive with all my actual music files died. how can I transfer the music on my ipod classic to another drive?

If you purchased all of the songs through itunes store, please follow these steps:
1. Open up Itunes and Click on Itunes Store
2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again.
If you didn't purchase them through Itunes, then you'll have to download software that will strip the songs from your iPod onto your computer. Here is a guide about how to copy iPod music. Hope it helps. Feel free to email me if you need further help.

How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7? I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network. Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

Sorry it's all done through iTunes.
The following article(s) may help you with home sharing.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

LOV with all colors

Hi,
I would like to create a dynamic LOV with all the colors in it (return value should be the color-code).
One can create a small table with all color-codes, but that's the easy part.
What would be the syntax of the dynamic LOV?
reg.
Chris

Hi Todd,
Working from Apex 3.0 there is also a item-type "color picker" wich also solves the problem (as mentioned in your link from Andy).
Thanx.
reg.
Chris

Moving hard drive with all of elements 11 to a new computer

I've already installed the hard drive, and set up windows 8.1 on a separate 1 gig drive. What's the easiest way to get Elements set up with all my tags etc. Can i just install Elements, and point it to the hard drive i installed with all my photos, and videos? I have an incremental back up, but i'm hoping i can just use my Elements hard drive. My windows 7 computer died, and i put the Elements hard drive into my new windows 8.1 rig. I don't want to lose all the tagging, and marking of photos and videos i've done.
Thanks,

When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

Time Machine wiped out my entire hard drive with all of my family photos

I am a new mac owner and i hooked up my WD external hard drive to my new imac. i was familiarizing myself with the applications and i clicked on time machine. it asked me to select a drive to use for the backup and i of course selected my external hard drive. Then it said that it was going to format the drive and i said NO WAY! i canceled out of the application immediately because this drive has all of my family photos. well low and behold, i cant access any of the files on the hard drive and when i hook it up to a pc, it doesn't recognize it at all. when i mange the device in the device manager it shows that it is there and it says that it is empty! SO MUCH FOR TIME MACHINE AND CANCELING THE FORMAT! I hope this saves someone from losing all of their photos. i dont know what time machine did, but i cant even get the hard drive working any more.
C

The files are very likely still there and recoverable. However, *it is very important that you do not use the drive until you recover your files* or you risk overwriting the data.
FileSalvage is a recovery tool that says it can recover files from a FAT32 formatted disk:
http://www.subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
You could also use a PC file recovery program but I'm not at all familiar with any of those.
You should report this incident to Apple Feedback and/or telephone them.
http://www.apple.com/macosx/feedback/

How do I reconnect to an external drive with all my itunes

Today I migrated to an Imac and have successfully updated iphoto but itunes isn't working.
My G4 has a faulty logic board so I upgraded before the inevitable.
I have always kept my music on an external drive (500GB with 375GB available space)
I have followed all the postings on this forum and have
• changed the location in Preferences/advanced to the correct folder on the external drive
• copied and pasted the contents of the Itunes folder on the internal HD (not the folder just the contents)
iTunes Library Extras.itdb (12KB)
iTunes library Genius.itdb (28KB)
iTunes Music (which is empty)
iTunes Music Library.xml (12KB)
Previous iTunes Library (iTunes Library 2008-09-26 36KB)
• restarted itunes holding down the option & shift so that I get prompted to select a library
• choose "Previous itunes library" from the external drive
• deleted the contents only from the original music/itunes folder
• had a quick restart and nothing !
Can someone please guide me through it. Just a reminder that there is no music on the internal drive. All 23GB is on the external drive.
Blue skies
Dean

Are you using iTunes 8? After my update to iTunes 8, my Western Digital 500 GB My Book which stores my music library, is recognized in iTunes, but if I don't play any music or videos within a few minutes, and try to play shortly thereafter, it is nothing but a spinning beach ball. I must shut down the drive and and remount it. It does drive scan and then mounts allowing me to play music again.
I believe iTunes 8 has issues with external drives (FireWire only?) in some cases and is causing issues with the library readability and drive powering.
Have you tried a completely different drive with the same data? Not the easiest option, but It sounds as if you've followed all the right steps so far.
Message was edited by: Chad Kerychuk

I just got my first MacBook pro and dedicated an external hard drive for time capsule. I also have a WD 3TB hard drive with all my old files, photos and movies (mostly from a pc). My Mac book pro would not allow me to add or delete any files from this har

This hard drive so I copies all the files (400gb worth) to my time capsule hard drive (WD 3 TB but set up by the Mac book pro). Now I am not sure what I need to do. I wiped the other WD hard drive cleAn on my pc and want to set it up in a way that I can access the files on both a pc and a Mac. If I partition it on my MacBook pro will this work? If I do it do I need to save the file twice on both the pc and Mac partitions or simply by partitioning it the hard drive will ave files in both formats regardless of if it's from a pc or a Mac. X
Thanks

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

I've moved an internal hard drive with all my music and library files to a new computer --- how can I get itunes to import the whole library while keeping my metadata?

I've always kept all my music on its own dedicated internal hard drive. Now I've got a new PC, finally made the switch to Windows 7 from XP, and I've moved my internal hard drive over to the new machine.
I installed iTunes, but I'm having a heck of a time getting it to import the music and library files, keeping all my playlists and metadata. Why is this so hard?

If your New to You Used Mac is froom mid 2012 and originally came with Lion installed on it you will need to Reinstall that version using the Online Internet Recovery system and then at first boot of the new install use the Setup Assistant system to copy over all the data from your wifes old hard drive.
To access the Online system at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. From the resulting screen that cames up, Mac OS X Utilities, select Disk Utility and then the top most entry for the hard drive, left hand panel, drive model number and size, and then the Partition tab. Repartition the drive as One Partition, You Must do that to get ride of the Mavericks Recovery HD partition which is hidden. Name the partition Macintosh HD with a format of Mac OS Extended (Journaled).
Once that is done exit disk utility and select Reinstall Mac OS X.

Lost a hard drive with all photos, how to start over?

Hi. Please help if you can.
A while back, I plugged my external hard drive into my ibook and uploaded all my photos. A few months ago, that hard drive died. It no longer exists. But now, whenever I ope n Iphoto, I get a message that says, "could not mount drive [x]." I click OK, but it still won't do anything.
I have tried to import all my photos again, and it will import a few but then gives me the same message: "could not mount drive [X]." I have to click OK after every couple of photos. Since I have a couple of thousand photos, this is impossible. And even when I try to mount just a few, it gives me that same message, and just freezes up. I have to force quit to make anything happen.
Any ideas on what I should do next? I am open to uninstalling and starting from scratch, but I am not sure how to do that.

mattcamera:
Welcome to the Apple Discussions. Was your first library a referenced library, i.e. you didn't have the photos copied to the library when importing, or was it a managed library where the photos were copied into the library? It sounds like it might have been a referenced library.
If it was a referenced library and you're starting over and importing your photos all over again, you should trash the old library and start with a new one so you're not trying to us a damaged database file.
You don't have to uninstall iPhoto, just delete the old library package, create a new one and start importing again.
Happy New Year
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Advice on connecting external drive with all of my media

My old computer stopped working and I took out the drive that contained all of my photos and videos that I use with LR and I am now using the drive as a bare bones drive connected to a docking station to another Mac.
The Lightroom folder was on another drive of the broken computer, so I copied that entire folder to the desktop of the new Mac. Everything seemed to open on its own when I opened Lightroom on the new Mac.
I want to add LOTS of new photos to LR, and I just want to check to make sure that this workflow will not cause any problems before I begin.
1. I plan to just copy new photos to the bare bones drive in the docking station and add keywords to them in LR, and when I'm done, eject the drive and place it into a protective case.
2. The Lightroom folder containing the catalog is currently on my desktop, it was previously stored on the other Mac inside the Pictures folder. I might keep it on the desktop for now, though I might move it somewhere else later. Are there any issues with moving it around like this?
Thanks.

My old computer stopped working and I took out the drive that contained all of my photos and videos that I use with LR and I am now using the drive as a bare bones drive connected to a docking station to another Mac.
The Lightroom folder was on another drive of the broken computer, so I copied that entire folder to the desktop of the new Mac. Everything seemed to open on its own when I opened Lightroom on the new Mac.
I want to add LOTS of new photos to LR, and I just want to check to make sure that this workflow will not cause any problems before I begin.
1. I plan to just copy new photos to the bare bones drive in the docking station and add keywords to them in LR, and when I'm done, eject the drive and place it into a protective case.
2. The Lightroom folder containing the catalog is currently on my desktop, it was previously stored on the other Mac inside the Pictures folder. I might keep it on the desktop for now, though I might move it somewhere else later. Are there any issues with moving it around like this?
Thanks.

HT1751 So what happens when the external hard drive with all of my iTunes media on it crashes??

I moved my iTunes media/library (as well as iPhoto) to an external hard drive many moons ago. It's been a great decision up until today, when the portable hard drive I was using decided to commit suicide. Is it possible to restore the lost media and library files from Time Machine, or are all of my music (and picture) files officially gone??? Help!!

If you have been doing the basics and backing up your computer, then they are not gone. They are in your backup.
Use your backup to put them back.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight

Sharing external hard drive with all home macs and pc's

I'd like to connect my go flex desk hard drive to my BT home hub 4 and access it through my macbook pro, is this possible and how can I do this myself?

You need to format the external drive to a format that can be used by Windows, OSx, and your BT home hub (what ever that is). So I think your best bet would be to format it FAT32 or ExFat since Windows and OSx can read/write to a hard drive formatted as FAT32 or ExFat. Read your BT home hub documentation to determine how to connect a hard drive to it. Most likely it will have a usb port if hard drives can be connected to it.

Designjet 450c driver with all colors needed

Similar Messages

Maybe you are looking for