DESIGNJET T2300 STUCK AT 94% during initializing

HI, My DESIGNJET T2300 STUCK AT 94% during initializing. Anyone know what i can do to get it unstuck?

omg, I thought i didn't have the 2nd roll of paper and didn't remove it from the feed.  After removing the cartriges, ph and the 2 rolls of paper, the unit is no longer stopping at 94".  It asked to install the papers, the ink cartriges,  printheads and is now finally preparing the print system. The print system preparation has now been going on for the last 25 minutes and is still going without end in sight. After the minutes and the % countdowns finishes, it seem to be starting over. 30 minutes in, it's finally done and proceeds to work on printhead alignment.  Still aligning at time of this post.  Thanks for all your help. Any idea what started all this and how to prevent it? Maintenance wise?

Similar Messages

  • New iPod Touch stuck in recovery mode during initial setup

    I am trying to set-up my daughter's new iPod touch 5th Gen. When you try to connect to iTunes message says "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". Even when you disconnect from computer it is stuck on screen telling you to connect USB to computer.  Two of her friends also got this iPod for Christmas and are having the same problem...during initial set-up. I've tried the system updates 3 times. iTunes recognizes the device, but the computer is not recognizing it as a drive. I've tried both my Mac and my Windows PC.  I've tried hard resets.  You can't remap the drive because the device doesn't show up. Most of the apple support topics address if iTunes doesn't recognize the device in conjunction with it not being recognized by the drive.  Obviously a problem with the new update because several brand new iPod touches wouldn't be having the same problem. Please help if you've found a solution. Happy New Years! 

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Does the iPod charge when connected?
    Have you tried another computer?
    Have you tried another cable?
    Some users have reported defective Lightning cables came with their 5G iPod. Some did not word from the beginning and for some the cables failed after a very short time.

  • How to use more than one application server during initial load?

    Hi,
    we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
    Thanks.
    Alexander Schiffer

    Hi Naresh,
    thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
    Two more OSS notes that helped me to guide our basis into the right direction:
    OSS 593058 - New RFC load balancing procedure
    OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
    Thanks again.
    Alexander Schiffer

  • Printer Stuck on start up initializing

    Printer Stuck on start up initializing.
    hard reset don't help.
    ? what could it be ? 

    Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
    http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
    and also this:
    http://www.thexlab.com/faqs/sbbod.html

  • Lower limit can only be changed during initial entry, Message no. NR651

    Hi Experts,
    As per the number ranges limit values defined in the system for the planned orders, there is a need to increase the number ranges.
    System is not allowing us to change the limit values of the Planned orders in MD91 and showing the Message no. NR651.
    We have also searched for the available threads in SCN and other sites, but didn't find the root cuase link for this error.
    System message:
    Lower limit can only be changed during initial entry
    Message no. NR651
    Diagnosis
    You have tried to change the lower limit of an interval which has a non-initial number status.
    System Response
    The change was not executed.
    Please guide us how can we increase the number ranges for planned orders.
    Thanks in advance.

    Hi,
    You can create a new number range or change in transaction OMi2 or in MD91.
    Assign the 02  by clicking number range in OMi2
    or in transaction OPPQ  click on number range & select the 02.
    Do the changes as described and analyse the results. Ensure that while testing no body is creating the planned orders.
    Regards,
    Narresh

  • Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial. Also I had installed the Mosaic app before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have ca

    Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial.
    Also I had installed the Mosaic app for ipad before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have cancelled, I have deleted, I have looked through the files for visible remnants.

    The sync count is 60 and static. The total number synced so far is 500+. None have been synced from the ipad except for corrections made there on those already synced.
    I have deleted the Mosaic app from all machines and checked the library folder and have contacted the Mosaic tech support and they have discontinued my subscription. I still get mosaic messages on initiating Lightroom and sometimes at closing.
    I have not tried to sync fewer yet, but some catalogs that I have tried are smaller numbers. Initially, it did well on good connections. Nothing works on my home connections over satellite.

  • Logic crashes during "initializing CoreAudio" after installing OSX 10.5.1

    Hi,
    After installing Leopard (10.5.1) Logic Pro 8 crashes during "initializing CoreAudio". (Logic Pro 7 freezes)
    On OSX 10.4 it worked great.
    As far as I can see now Logic Pro is the only program with this problem.
    (RAX works fine!)
    Is there someone with the same issue?
    Or with a sollution?
    Greetings,
    Michiel

    Thanks for your reaction.
    Althoug it turned out that I didn't had any digidesign Plugins it indeed was an plugin compatibillity problem.
    Rewire was the one.
    An update of Melodyne did the trick.
    Thanks again (stupid enough I hadn't thought about 3th party plugin compatibillity at all)
    Greetings,
    Michiel
    *For people with the same problem, reading this toppic, but without Melodyne (and its update)
    deleting the components from the folder
    "Library/Application Support/Propellerhead Software/ReWire"
    works as well, but of course disables the use of Rewire.

  • During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    Sounds like you have the print dialog minimised, as shown.
    If you click the triangle next to the printer name, this will expand the print dialog and from this view you can see all the menu options as mentioned in the guide.

  • Firefox is loading on desktop rather than in Applications during initial download, how do I fix this?

    During initial install, Firefox loads on the desktop looking like a drive. It doesn't load into Applications like it is supposed to. From that point it won't let me do anything with it....
    Please help-
    I'm running a new MacBook Pro...
    == I tried to load it on my computer ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac

  • HT3986 Windows wants to restart several times during initial installation.  How do I restart it in windows, so I don't lose my installation progress?

    Windows wants to restart several times during initial installation.  How do I restart it in windows, so I don't lose my installation progress?

    It would normally restart in to Windows but if you need to do it manually you can hold the Alt key as the chime sounds and then pick the Windows hard drive icon.

  • WsCompile script failed during initial client generation

    Hi all,
    I have NetBeans IDE 6.5 and GlassFishV2 installed on my pc. I tried to add a new web service client from an existing WSDL url to my java project but I get this error during adding the web service: “WsCompile script failed during initial client generation.”
    Why do I get this error message?
    Can anybody help me please?
    Note: WSDL made by Weblogic 11g and I have Jax-RPC 1.6 installed.

    Have you tried [XML RPC|http://ws.apache.org/xmlrpc/index.html]

  • Error during Initial Provisioning/Modify: Inconsistency with address

    Hi all
    During Initial Provisioning (and also after any modif) of some users I get the following errors:
    E:Failed storing DDIC
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69802" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    E:Failed storing SAP*
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69801" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    E:Failed storing SAPCPIC
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69802" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    Surprisingly they're all "special users"; standard users are provisioned without errors (not related to the company address).
    Unfortunately it's not mentioned in the logs which system has these inconsistencies, because mostly provisioning works well (for these users).
    Questions:
    1. Does anybody know how I can resolve or what combination of values lead to this error?
    2. Where can I add a Debug-Line to see which system(s) fail?
    Any help appreciated
    BR
    Michael

    I solved this.
    First I added an Initialization script to the UpdateABAPUser-Pass which told me the repository and prints it as warning ot the job log.
    Then I took a look at these ABAP-Systems using SU01 and realized that SAP*, DDIC and SAPCPIC don't have the mandatory "Lastname" set, so SU01 says "Inconsistency with address" (DE: "Schiefstand bei Adresse").
    After I set this once on ABAP-side the UpdateABAPUser-Task ran fine.
    But still I would have expected that IdM sets this attribute as long as it is set on IdM-side, especially since it is mandatory in the destination system. At least it could provide a more informative error message.
    Thanks for any help.
    BR
    Michael

  • HT201210 New iPad can't reach activation server during initial set up

    During initial set up my new iPad could not reach the activation server

    I wouldn't say that it is a common problem but it happens.
    Are you using the cable and a connecting to iTunes? If the iPad2 came with iOS 5 on it then OTA activation is possible.
    How are you trying to activate?

  • CRM 5.0 - Error during Initial Load

    Hi,
    We have connected CRM 5.0 with ECC 5.0.
    During initial load we are getting error in the outbound queue of ECC system as 'Name or Password incorrect (Repeat Logon)'.
    Any idea, why is this happening. We have double checked the user id and password entered in SM59 is correct.
    Thanks in advance,
    Amit

    Hi Michael,
    Yes, I had checked on both the systems.
    Anyways, the problem is now solved, it seems the BASIS team did some goofup while configuring the RFC destinations. It is working now.
    Thanks for your help.
    Cheers,
    Amit

  • Sysfail error during initial load

    Got sysfail error. Checked for shortdumps and found this
    MESSAGE_TYPE_X     SAPLCRMO
    'No external system (such as CRM) connected'
    Checked the RFC. Seems ok. Any idea?
    Get the parameters for the RFC conection.
        c_stshd-mass_queue = c_stshd-mass_data.
        PERFORM get_download_params_and_queue
                TABLES t_bapistructures
                USING c_stshd-objname
                      c_stshd-objclass
                      gv_destination
                      gv_rfc_queue
                      gv_server_release
                      i_bapicrmdh2
                      c_stshd-mass_queue
                      c_stshd
                      i_transfer_data
                      i_crmrfcpar
                      e_rfcoltp.
    Set variables
        e_synchronous_call = gv_synchronous_call.
    Raise an error if the destination of the foreign system could not be
    found. (Only during Initial Load, Upload, Compare and Requests).
        IF gt_rfcdest[] IS INITIAL AND
           NOT i_bapicrmdh2-ref_id IS INITIAL.
          MESSAGE x050(c_) WITH
                  'No external system (such as CRM) connected'(007).
        ELSE.
          t_rfcdest[] = gt_rfcdest[].
        ENDIF.

    The  RFC Destination for Replication & Realignment (Clt 000) isn't set because only the root admin has access to clnt000 and he's in vacation. Could that be the problem?

Maybe you are looking for