Designjet750c+ long plot problem

Need to perform a custom plot (8ft long)
Can print all the standard paper sizes up to A0, but I now have a 3ft x 8ft plot at 1:1 scale and no obvious way to do it! 36″ roll paper, 150ft long and I’m currently reduced to max plot size of A0 sections?
Sure its a driver issue, yet there used to be hdi drivers around for acad, have tried all the HP drivers without success!
There is something out there that says system drivers will only print a max plot size of something like 48", I've managed to plot an oversize A0 at about 1 metre. Thats seems to be the limit. To get longer plots a non system driver is needed, hence I thought that various cad systems would have supplied some, but they don't seem to!
For isnstance, in Solidworks SW2010 drawing I can create a custom page but the system printer driver won't follow suit!
Yet any commercial printer shops will copy some plans for you off a roll from a similar machine, so there must be a solution to this somewhere.
Just out of interest I have done a printer memory upgrade, Post script rom upgrade and it is a network printer.
Any help etc, appreciated.

I do not have an answer, but you may have better results asking the question in the Designjet forum here.  The forum here is more for consumer level devices, there are more Designjet experts in the Designjet forum.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • MAIL: Trying to settle long-lasting problem. Mail always immediately downloads the messages I delete from any IMAP mailbox. I'm running out of HD space!

    BACKGROUND
    I only have 60GB of space on my MacBook Air. Currently, three long-standing IMAP accounts are taking up over 7GB of it!
    I have seen several related discussions about this kind of problem, but they all seem to have been solved or glossed over with setting up the IMAP interaction so that messages are deleted from the server in addition to the device or with a "Mailbox > Use This Mailbox For" fix that doesn't work for me. I like being able to save all of my email history on servers (I'm often surprised by how many years back I have to search to find a piece of information I need), but I can no longer stand losing so much of my very limited local space to really old mail.
    PROBLEM
    I'll refer to just one of the relevant accounts as "Gmail," since that's in parentheses when seen in these screenshots. These are its current Mailbox Behaviors settings:
    Under my Gmail Inbox in Mail, I have deleted every message from before 2013. The mail from 2013 is all that I want stored on my MacBook Air.
    Ultimately, I think this has something to do with the Archive (seen in the sidebar above, as well). Even when I've deleted everything from before 2013 in my Inbox, AND emptied the entire contents of Trash manually, the Archive still contains all of the mail from the server (yes, this account was started in 2011, but I have others that go back much further).
    The cherry on top is that when I delete the same messages from the Archive as I've deleted from the Inbox, Mail immediately begins re-downloading all of those messages. Last time I tried this my laptop had to download 23000 messages, but here's a screenshot of proof with a smaller sample:
    In case my Gmail server settings are useful to consider, here they are:
    Final Notes
    • There's a lot that I don't know about exactly how IMAP communication occurs between a device and a server. For my sake and the sake of anyone else who needs this kind of help, please clarify terms like "flags" and "archive" (since Gmail and Mail both use the term and I don't know think they mean exactly the same thing) if/when you use them.
    • If anyone does think that there's some sort of "Mailbox > Use This Mailbox For" solution to this, you should know that no matter what I have selected in Mail's sidebar (at no matter what level of indentation), the options available under that menu item are always grayed-out.
    • I want to keep using Mail. There's a lot that I like about it and I don't want to switch to Thunderbird or something else (remember, I need to save as much local space as I can).
    • I just upgraded to 10.9.0 Mavericks, but this problem has existed for me and behaved essentially just like this as long as I can remember. In fact, I think I recall the problem still existing before there was an Archive in the sidebar at all.

    UPDATE
    I still have the problem, but when I checked on this post to see if anyone had commented and I simply hadn't received an e-mail, I noticed that all but the last of the images I included have stopped displaying (I had friends check, too).  Most of them were just visual examples of what I was explaining in hopes of giving context and all available info that I may not have personally viewed as relevant, but the first one, about my account's Mailbox Behaviors settings sure is important. These are the settings I have:
    • Store draft messages on the server — Check
    • Store sent messages on the server — Check
    • Delete sent messages — One month old
    • Store junk messages on the server — Check
    • Delete junk messages — One week old
    • Move deleted messages to the Trash mailbox — Grayed-out and Check
    • Store deleted messages on the server — Grayed-out and Check
    • Permanently erase deleted messages when — Quitting Mail
    I hope this helps. Please comment if I'm leaving out any other important information.

  • Long text problem while uploading Inspection plan through BDC.

    Hi,
    I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
    I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
    Waiting for quick solution.
    Thanks in advance.
    Fahié

    Hi a®s,
    Thanks a lot for your kind reply.
    My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
    When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
    I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
    Waiting for quick solution.
    Thanks in advance.
    Fahié

  • ITouch cannot be updated because it was disconnected, also some extraordinarily long backup problems.

    I have a 4th gen ipod touch and i've been having this problem for a while. I'm on 4.3.3 and I don't jailbreak, I buy all my apps etc, but whenever I sync, it won't properly do it. It will start the sync by backing up. Now, I don't actually have a single back up meaning this is technically my 'first' backup. I know that 'first' backups are supposed to take longer, but it either a) takes over 3 hours (i've left it on for this long then gave up) or b) will go through and just before completing, say that the ipod was disconnected and thus was unable to backup. Occasionally, it will go through with the backup when i right click on my iPod in iTunes and select 'back up' but when I go to check everything, including my preferences > devices > backups, nothing has changed. I don't have a single backup on that list, its white and bare.
    I don't have a single backup because although I managed to get this iPod fine, new from the apple store and backup for the first time then, after a while it stopped properly syncing, aka this problem. I was then recommended by some random site that I can't recall to delete backups and backup for the 'first' time again. I've also tried clearing some apps to see if that was the problem, as well as emptying some of my photos, but although i've not cleared all the apps nor all the photos, it doesn't seem to make a difference.
    When I try to update to 4.3.5, it will extract information, proceed to Back up (step 1 of 5) and somewhere in the backing up process my iPod Touch will reboot and the apple logo plus a loading logo (the white lines arranged in a circular motion, when things are 'loading') ontop will appear. From then on, regularily will my iPod Touch beep with a high pitched noise that I can't put my finger on, but is familiar, until the backup ultimately fails with the message "iTunes could not back up the iPod because it was disconnected."
    I've tried different USB ports, I do NOT use a hub. It also does not sync songs as when I try to put more songs on my iPod, it requires to back up. I've also tried clicking the (x) to stop the backup but clicking it doesn't even do anything.
    I've wanted to try to restore, but apparently I can't even do that because it TOO requires to back up right after restoration, it will fail the backup and revert my iPod to what it was before.
    Please tell me that this is a problem I can fix easily, it's a fairly new iPod Touch.

    See here for 
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • XY graph - multi-plot problem

    Hi,
    I'm experiencing a problem using a multi-plot xy graph. I have to display 2 plots together, and make them appear and disappear many times during the program running.
    But when I close LV and restart it, the second plot (plot1) doesn't appear, and also I lose all the properties I've set for it (name, color,...). If I don't shut down LV everything works well.
    What can I do?

    Stefano Moret wrote:
    When you write about use property nodes, I'm using the "visible" one.
    Your suggestion is to try also to set all the properties from there? Maybe it's a good idea, I'll try.
    Here are some code snippets I used once to initialize the graph and later on change legend entries depending on user selection.
    You can also change the way plots are represented during run time. You always have to start with ActPlot do selct one of the plots.
    Good luck

  • Long messages problem

    Hi all,
    When I send a short message (2 to 4 lines) on my iPhone 4S and I press the stand-by button while the message is still being sent, I hear the 'woosh' sound a few seconds later. So no problems for that. But when I send a longer message (10 lines or more) and I do the same (pressing the stand-by button while sending) I don't get to hear the 'woosh' sound, even when I wait a few minutes. I only get to hear the 'woosh' sound if I reactivate my phone by pressing on the home button or stand-by button, and this can be a few hours after I had sent the message (for example when I'm at my work or so). So my question is: is this normal and does your phone need to be activated while it's sending a message or is this not normal and what for solution do you guys propose... It's not a big deal but I'm just wondering. I have my phone now for 4 months but I haven't really been noticing it since then, just the last couple of days it appeared to me. Thanks in advance guys

    For an SMS/MMS that exceeds 160 characters which is the limit with carriers in the U.S., I would wait until you hear the sent alert sound before selecting the sleep/wake button if the message is not sent otherwise. Not sure why the message is not being sent after selecting the sleep/wake button, but it not you need to wait to ensure the message is sent before doing so.

  • Long Text problem in a BADI

    Hi Everyone,
    I am implementing BADI "WORKORDER_UPDATE". The requirement is there should be no changes made on the IW32 transaction. I have successfully implemented the BADI and it is now giving an error when we try to change anything on the order in IW32.
    The problem is with the longtext. There is a field TXCHG which I used to see if there are any changes being made to the long text. When someone changes the lontext and tries to save it, it gives an error but still retains the changed longtext. The code works fine with all other changes(I mean it gives an error when they try to change anything in IW32 and will not retain the changes). But this does not happen in the case of long text. It gives an error but still has the changed long text as part of the order.
    Any suggestions on how to proceeed? I am using instance  Before_Update in this BADI.
    Thanks
    Kumar.

    Do u mean after giving the Error message, even if u come out without saving it is keeping the changes?
    If the answer to the above question is no then try the following procedure:
    Read the long text using READ_TEXT (function module) by passing the TDID, TDOBJECT, TDSPRAS, TDNAME (u can get these details by going through the menu edit-> go to header). 
    Store that in an internal table and then append all the lines of this internal table into a string Variable and assign this variable's text to the field in which long text is being displayed.
    This should work bcoz , in the database only the original Long text is stored and we are retrieving it and displaying back in the relevant field.
    Please reply if it works.....

  • ECC5.0 Long text Problem in QM02

    Hi friends,
    when i am create Item long text in Qm01 when i am reading the text in from FM read_text in tlines my structure is
    tdofrmat ,tdline
             text1(72)
    =          text1(72)
             text2(59)
    after saving the long text and when i am trying to read in QM02 mode ,with same FM i am getting as.
    tdofrmat ,tdline
    X>         * text1(72)
    X>         * text1(72)
    X>         * text2(59)
    Hope u under stand my problem.
    How to Indentify which line is continous to which one,where the word was splitted.i searched FM's but i didn't get.i tried with "Newline" by refering Class No result.Gurus kindly Provide the solution......
    In Advance Thanks...

    Hi,
    Did you try this:
    text1(72)
      text1+72(72)
    text2(59)
    Regards.

  • IA05-Long text problem

    Hi ,
    I have to do a data upload for IA05 transaction.
    I have done the recording for BDC.
    But i am facing problem in Long text upload (SAVE_TEXT), because the TEXT NAME logic requires Group number. This group number is created when the transaction is executed.
    Do by any means i can get the group number at runtime because will executing the transaction i can see the group number which is created.
    Else does anybody have some other way to do this. Please suggest.
    Thanks & Regards
    Kapil

    Hi,
    <b>This is the only way you can do this.</b>
    And you are not hardcoding anything. If BDC is successful and you get the 'Group numer" just create a text using SAVE_TEXT FM.
    Let me know if you have something else on your mind.
    Regards,
    RS

  • XY Scatter Plot Problems

    XY scatter plots that were successful previously now are in error.  They now appear as "column type" charts with the horizontal axis simply the index of the data point (that is, 1, 2, 3, ...).  This problem has appeared after the recent
    update of MS Office 2013.  Please help quickly!

    Hi,
    Plese try to change the chart type.  Click the chart->Design Tab->Change Chart Type->choose
    X Y Scatter.
    Also when right click the chart->Select Data, what does the labels of
    Legend and Horizontal look like?
    If possible, please share the workbook with us ,you can upload the file to a file sharing site and then share the link here.
    Wind Zhang
    TechNet Community Support

  • Stacked plots problem in exe

    Hi,
    Ive got a problem with creating .exe application where 2nd chart functioning properly.
    2nd chart is in subpanel as a stacked plot. I pass via main form numbers of stacked plots. In builder it works perfectly, in .exe not at all..
    Any ideas?
    Attachments:
    WykresOnlineCAN.zip ‏73 KB

    Ok sorry I didnt explain well whats the point.
    There is no problem with properly "refreshing"  of subplot - works fine even without static reference(but thanks anyway, I missed that).
    I cannot changed the number of staked plots in the screen(constanly 1) - in editor mode it changes according as number of flaged plots.
    The problem is show in the pictures below.
    Attachments:
    editor mode.png ‏60 KB
    in exe.png ‏57 KB

  • Long text problem in sap script

    Hi Experts,
    I have craeted sap script for payment print progrem.. in my sap script one window is text window... client want more then 300 char for that window. for that i use read_text function module... its working fine... but problem is it retrive only one line from long text editor. only 70 char i got.
    below is my coding......
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        ID                            = '0001'
        LANGUAGE                      = sy-langu
        NAME                          = NAME
        OBJECT                        = 'DOC_ITEM'
      TABLES
        LINES                         = LINES          .
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT LINES.
      n = 0.
      l = 132.
      text+n(l) = lines-tdline.
      n = n + 132.
      l = l + 132.
    ENDLOOP.
    in sap script i have direct pass lines-tdline
    *&lines-tdline&
    Please suggest me which point i missing?
    Thanks
    Jigar

    Hi All,
    The standard text will be stored in Name = ORDCONF_TEXT_(sales org)_(distributionchannel)_(division)
    Text ID = ZSD
    Examples: ORDCONF_TEXT_4000_01_01 , ORDCONF_TEXT_4000_01_80 , ORDCONF_TEXT_1000_01_01.
    Requirement :
    The print program /form will need to pick up the appropriate standard text based on the Sales Area (combination of Sales Org / Distribution Center / Division) of the sales order [VBAK-VKORG / VTWEG / SPART], provided a standard text has been created for that Sales Area. Itu2019s not required that every sales area have a standard text, so if one is not found, this step should be skipped and the rest of the print program executed.
    The new text should print after 2 blank lines after the Printable Notes text (which is after the line items and the Total Net Price prints).
    The font should be the same size as the Printable Notes, but bolded rather than italicized.
    The text should print in the same columns as the Printable Notes currently print in (Material Description / Scheduled Ship Date / Quantity) .
    So the logic i have used is this below code:
    I used a subroutine in the layout of the main window becoz i need to print it in the main window below after 2 blank lines of line items.
    This is logic in the layout:
    /:PERFORM GET_OBJECT IN PROGRAM ZSDRP001_ORD_CONF_IRE
    /:USING &VBDKA-VBELN&
    /:CHANGING &ORDCONF_TEXT&
    /:ENDFORM
    /:INCLUDE &ORDCONF_TEXT& OBJECT TEXT ID ZSD PARAGRAPH A1
    I called this subroutine in the print program:
    Logic in the print program:
    FORM GET_OBJECT TABLES INPUT_TAB STRUCTURE ITCSY
                                                 OUTPUT_TAB STRUCTURE ITCSY.
    DATA : TMP_VBELN LIKE vbdka-VBELN,
                TMP_VKORG LIKE VBAK-VKORG,
                TMP_VTWEG LIKE VBAK-VTWEG,
               TMP_SPART LIKE VBAK-SPART,
               TMP_TXNAM1(40) TYPE C VALUE 'ORDCONF_TEXT',
               TMP_TXNAM2(100) TYPE C.
    DATA: v_text LIKE tline-tdline.
    DATA : P_V_TEXT LIKE tline-tdline.
    CLEAR : TMP_TXNAM1, TMP_TXNAM2, TMP_VBELN, TMP_VKORG, TMP_VTWEG, TMP_SPART.
    READ TABLE INPUT_TAB WITH KEY NAME = 'vbdka-VBELN'.
    IF SY-SUBRC = 0.
    tmp_vbeln = input_tab-value.
    ENDIF.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING INPUT = TMP_VBELN
    I
    MPORTING OUTPUT = TMP_VBELN .
    CLEAR VBAK.
    SELECT SINGLE VKORG VTWEG SPART INTO (TMP_VKORG, TMP_VTWEG, TMP_SPART)
                                            FROM VBAK WHERE VBELN EQ TMP_VBELN.
    IF NOT TMP_VKORG IS INITIAL
    AND NOT TMP_VTWEG IS INITIAL
    AND NOT TMP_SPART IS INITIAL.
    CONCATENATE TMP_TXNAM1 TMP_VKORG tmp_vtweg tmp_spart into TMP_TXNAM2 SEPARATED BY '_'.
    endif.
    CONDENSE TMP_TXNAM2 NO-GAPS.
    PERFORM read_order_text USING TMP_TXNAM2 CHANGING v_text.
    READ TABLE output_tab WITH KEY NAME = 'ORDCONF_TEXT'.
    IF SY-SUBRC = 0.
    output_tab-value = P_V_TEXT.
    MODIFY output_tab index sy-tabix.
    endif.
    endform.
    FORM READ_ORDER_TEXT USING P_TMP_TXNAM2 CHANGING P_V_TEXT LIKE tline-tdline.
    DATA: ztdid LIKE thead-tdid,
              zlang LIKE thead-tdspras,
              zobj LIKE thead-tdobject,
              zname LIKE thead-tdname.
    DATA: tlines TYPE STANDARD TABLE OF tline WITH HEADER LINE
              thead LIKE thead.
    CLEAR P_V_TEXT.
    ztdid = 'ZSD'.
    zlang = 'E'.
    zobj = 'TEXT'.
    zname = P_TMP_TXNAM2.
    CLEAR tlines.
    REFRESH tlines.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    object = zobj
    name = zname
    id = ztdid
    language = zlang
    IMPORTING
    header = thead
    TABLES
    lines = tlines
    EXCEPTIONS
    id = 1
    language = 2
    name = 3
    not_found = 4
    object = 5
    reference_check = 6
    wrong_access_to_archive = 7
    OTHERS = 8.
    LOOP AT tlines WHERE NOT tdline IS INITIAL.
    MOVE tlines-tdline TO P_V_TEXT.
    ENDLOOP.
    ENDFORM.
    But still its not getting printed .Plz tell me where i am going wrong.
    Thanks,
    Suman

  • Activation of Adobe Form takes too long / XML problem?

    Dear all,
    I copied a standard form to customer name a year ago with life cycle designer version 7. The designer was updated to 8.
    When making a change to the adobe form now, the activation takes more than 30 minutes in some cases. I copied the original form again and the activation takes less than 3 minutes.
    When calling the XML Coding-tab within the designer it also takes very long and in some cases the system crashes ....
    Has anyone an idea why this happens and if there is anything that i can do with changing attributes or other settings? I also tried to copy the copied form again. Same problem. Only when copying the standard form the activation is normal. I made too many changes so to start over again would take long. I would like to avoid this.
    Thank you!
    Regards
    Viktoria

    Hi,
    I could not solve this. Had to create the form again. Tried to copy most of the elements into it.
    Now it works again and is activated within 1-2 minutes.
    So no real solution...
    Regards
    Viktoria

  • Major Bug! Long standing problem: "Attaching" message prevents sending reply

    Guys, before I rant I want you to know I love Thunderbird, have used it for many years. However this problem has haunted me for years and I can't believe that it is not yet fixed.
    This problem directly relates to problem 1048494 (when long time composing a reply Thurderbird tries to add an attachment the only given option to close or wait) - The suggestions in this post do not help.
    This is very easy to replicate.
    The problem: It is common to have embedded images in an email. (email Signatures often contain a logo).
    It is also common to take time to create your reply - press reply and take time to draft and create the reply.
    For an unknown reason - if I reply quickly, within a minute or so, it's ok. Reply sent. If I keep the reply window open for
    If you take longer TB pop's up "attaching" and hangs, never sends the reply. It want's to "attach" the embedded images but cant.
    Workaround:
    My workaround is either to delete the embedded images (a real pain to delete them all if it's a lot of threads in email, multiple logs in multiple signatures), or to copy text into a text editor, cancel reply, reply again and copy text back into TB and send quickly.
    I had this problem on TB on Ubuntu and now on Windows 7. It's nothing to do with Virus Scan (I never used that on Ubuntu).
    Can someone from development look into this please - It's preventing many of my colleagues using TB.
    There seems to be 2 problems here: 1) some timer/delay that makes TB try to 'attach' embedded images 2) the problem of replying when an email history has embedded images
    (p.s. I am not talking about attachments, I'm talking about embedded images often found in peoples signatures)
    Please TB developer community - Please take this problem seriously:
    Happy to send any info you want to help diagnose and resolve this? Please ask.

    If you want to talk to developers, I suggest you file a bug.
    https://bugzilla.mozilla.org/
    But before you do. Try both of the following.
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • Con2 long time problem

    hi,
    When I execute the revaluation in the background and with parallel processing the revaluation runs without any problems, however, the update takes a long time to update the revaluation records.
    thanks in advance..

    hi guru,
    We have runtime problems (database) for the period-end closing step CON2 , it takes too long and we re unable to close the period.
    System conditions re as follows,
    Material ledger is active
    Variant configuration is used
    When we execute CON2 in test run, we dont face with any problem but without test run, in the back ground, it takes more than 48 hours without successful completion.
    thanks
    ferha

Maybe you are looking for