Designs off center of artboard after saving?

Hi All,
There are a handful of files that I will save as svg's and when I go to reopen them in AI they will be off center of the artboard. Here is an example:
http://d.pr/j4RP+.
Anyone know how to fix this?
Thx

Did you enable preserve illustrator editing capabilites

Similar Messages

Xperia Z3 off center camera

Hallo! Recently i changed the screen due to yellow tint at the bottom. After that(maybe service operation isn' t the problem), i spotted that my rear camera is off center.. After a recearch, i found thay many sony and samsung devices have this problem, but i can' t understand why, since the position of the camera and of the back glass is standard.. Do you have this issue? It' s only cosmetic. Here is a picture:
[img]http://i.imgur.com/fYEWZUS.jpg[/img]

That's odd, contact your local Xperia Care regarding this issue http://support.sonymobile.com/global-en/contactUs/

Titles off center after import into FCE

I seem to always have to adjust the position of my titles after importing them into FCE because they are off center. They are centered in LT and I have tried changing the project properties to different video formats, but they continue to be off to one side after import. This occurs both when I import the .ipr file into FCE and when I render the movie and import it as a .mov file. Any suggestions on how to have the titles show up where I designed them in LT?

I am not sure if they are always off the same number of pixels, but they do always seem below center and off to the right. Could it be that I am using the incorrect project preferences? I am using Captured DV footage in FCE and I have tried both NTSC DV 3:2 and NTSC 4:3 and I still seem to have the problem.

Batch "Place" gets off center after multiple images

This is sort of a hard one to explain. I'm trying to place a border and watermark over multiple images through the Place command. The image that I'm using to place is a .psd file with transparent background. The main images are tiff files. The problem is, that after a number of images that are changed, the placed image (border/watermark) gets off center by a few pixels each time and I end up with a border shifting to the right. How can I fix this? Here is my process:
1. Create action
2. Resize image to 1200x1800px 300dpi.
3. "Place" border/watermark image over top of main image. Center Position is 600px and 1200px. Scale 100.1% for each side
4. Flatten Image
5. Sharpen
6. Close action
7. I then select multiple images via Bridge and go to "Batch" or "Image Processor" and run it.
8. Over multiple images, the placed image "creeps" to the right by a pixel or two each image.
Is there something I'm doing wrong here? The placed image is the exact same size and orientation as the original images.

Ahh this is a huge help. This problem has been a thorn in my side for months. Thank you for the quick answer. Here is the list of my steps now...
1. Resize background image to whatever I need
2. Place overlay image (border/watermark) and "enter"
3. Select All
4. Layer > Align layers to selection > Vertical Centers
5. Layer > Align layers to selection > Horizontal Centers
6. Flatten Image
Works great, as long as the placed image is the same size as the background image.

My ipad 2 camera is off center is every ipad 2 like that?

My front facing camera is terribly off center. My face isn't big at all and is on the small side even, but if I hold the ipad in landscape mode in a comfortable position half of my face gets cutoff. I have to stretch my arms all the way to get all of my face in and it's centered on the right-hand side of the screen. Are all ipads like this or can I trade it in for a more centered camera?

I'm not near an Apple Store, so I called Applecare and told them about it.(had to call back b/c of a system being down). They said they will ship me a new one this week. I know it has to be a design flaw because, my other ipad 2 does NOT have this problem at all! I have the photos to prove it to them, and offered to send them to them, but the declined.
Later this afternoon after I posted here, I went to BestBuy and played around with the ipad 2 that was on display. And guess what? the front facing camera was fine. I also hit PC Richards and tested their display model, and again, no problem with front facing camera!
I just hope the one they send me works like my other one. For the money we pay for these things, they should work correctly. Having to angle your arm all the way to the right would only serve as a recipe for disaster, that when taking a photo, it only would serve to make it easier to drop the ipad altogether.
Thanks for your reply. Maybe you should contact apple again and make them aware of it. Tell them you know people who have ipads that do NOT have the problem. They have to replace it!
Being that you're covered, they will send one out to you (so you can use the one you have until you get the replacement). Then, you just have to put the one you have in the box and peel off the label, and have Fedex pick it up and send it back to them. But make sure your replacement works before you do . The first thing I'm going to do is test the replacement camera immediately.
Good luck and give it a shot. Spending $good money on these things, they should work!

Imported Objects Disappear After Saving

I have been working on a project into which I've imported 4 Illustrator objects (If you look at the first image below, the objects are a lightpost, two figures, the word StoryFirst and the word Media). I saved the 4 objects as separate files in Illustrator and then imported each one as "Composition" while leaving the "Illustrator/PDF/EPS Sequence" box unchecked.
After saving the AE project last night, I reopened the project this morning and found this:
As you can see, the lightpost and figures objects are still visible in the composition pane, but the StoryFirst and Media objects have disappeared. The files are still listed in the project pane, however, and you can still select the object layers in the timeline and you will get the object wireframes in the composition pane as if they were still there, but the actual objects themselves are no longer visible. As you can see in the picture, when I select a layer of the StoryFirst object in the project pane, the mini-preview in the upper left corner doesn't even display it.
I've tried closing and reopening the project a few times as well as toggling on and off the eye switch on each layer in the timeline, both to no avail. I also tried right clicking on each layer and choosing "Replace File" and bringing everything back in again new. This makes the objects reappear at the moment I have the project open, but as soon as I save the project again, close it and reopen it, they've disappeared again! All object files are in the same place in my hard drive as they've always been. AE never prompted me with an error message that it couldn't locate files. This is a very bizarre problem I've never encountered before.
Any help in solving this mystery would be greatly appreciated! Thanks everyone!
Michael
Founder/Director, StoryFirst Media
www.storyfirstmedia.com

In AI, check your layers palette and inspect the structure of your groups. There may be odd combinations of e.g. groups with empty clipping masks (that cover the entire artboard and are only there, because the graphics were imported from a legacy version of AI or another program). That could lead to misinterpretation where then AE would clip the entire artwork. Similarly, look for things like Livepaint groups or live pathfinder groups. Same for art brushes, pattern brushes, pattern fills etc. In case of doubt, always do an Object --> Expand, then select the artwork and choose "Release Clipping mask". Often a bit optimization will do wonders. Also, one thing that came to mind after I wrote my last reply, is to check your swatches. Since AE operates in RGB mode only, it may not deal correctly with spot color swatches (Pantone) and CMYK swatches...
Mylenium

Front Panel objects do not stay in place after saving, closing, and reopening the VI.

I have been working with a couple of versions of a main VI. The original VI was given to me so that I could add additional functionalities to it. I had been designing the front panel of the latest version of the VI on a Dell laptop running Windows 7 and LabView 2011 SP1 using a monitor with a resolution of 1920x1080. My booleans, numerics, and plots on the front panel had always stayed in place after saving, closing, and reopening the VI. Once in the field, I connected my laptop to a cRIO9073 and used my laptop screen with a resolution of 1366x768 to operate the VI. I made some changes to the VI, saved it, and reopened it. This time I noticed that the front panel objects had become overlapped, resized, and generally rearranged. I tried fixing the objects but I noticed that they reverted back to the incorrect positions after saving and reopening the VI. I was successful in keeping the objects in position a couple of times, but when I would open the VI at a later time, the objects were again rearranged. This is happening on both my monitor and laptop screen. The original version of the VI, however, does not behave this way and I have opened it on both my monitor and laptop screen. In this version, the front panel objects always stay in place. Both VI's have the same window size properties. Could I have corrupted the latest version of my VI somehow? Below are screenshots of the front panels of both VI's.
Attachments:
Blender Controller Original.PNG ‏140 KB
Blender Controller.PNG ‏203 KB

Hi Miguel,
It is possible to programmatically set or change the position of front panel objects. (for example: http://digital.ni.com/public.nsf/allkb/4D0DA06B43195B3F862572F3000AF2D3?OpenDocument) However, if you haven’t intentionally done that, it seems unlikely that it is the problem.
Have you tried copying the entire block diagram in to a new VI to see if the problem persists? While it is unlikely, you are right that it is possible for VIs to become corrupted. I’ve never heard of a situation like this except in the situation where the settings Tom had you check have been changed. Here is some information about those settings:
http://digital.ni.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument
Since there was no rearrangement when you copied the front panel to a new VI, you might try copying the block diagram a little bit at a time to see if there is some particular part of it that creates the problem somehow.
K. Johnson

Lightroom printing is off center

Hello all, I just replaced my home computer after it got fried from an electrical surge. While I was at it, I moved from a PC with XP to a Mac Pro with Snow Leopard. I had to transfer my Adobe License for Photoshop too and moved to CS5. The move has been great so far, but when I print out of Lightroom 2.7 with my Epson 3800 my prints are either off center or off the page. Printing with my previous PC setup was perfect and now I am totally baffled. I am in a bit of a time crunch too, as I need to get a photo shoot printed and delivered to a client. I even thought about dowloading the Lightroom 3 Beta to see if this would give me a temporary solution. Any one have any ideas? I have been searching the web for a few days looking for a solution and my tech person is baffled too.
Many Thanks,
J. Paul

Make sure to visit the Page Setup dialog and select your printer model (3800) from the "Format For" popup menu, and the page size from the "Paper Size" popup menu:
See suggested steps here:
http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html#lightroom
and
Mac screenshots here:
http://people.csail.mit.edu/ericchan/dp/Epson3800/Print3800MacColor.zip
Then set the margins appropriately in LR's Layout tab.

Signature Scribble field not retaining image file after saving

I have 2 issues with my PDF dynamic file I sent out
1) The add/remove controls is adding a random amount of extra blank rows upon saving the PDF
2) The image files selected for the Signature Scribble field is not retaining the image file after saving. It also doesn't give an opportunity to actually draw in a signature.
I even tried to use the Subform Instance Controls Insert/Remove/Move in my table, but I keep receiving the error "You have reached the maximum number of items allowed"
I would appreciate any help you can give me! I have been farting around with this for too long.
Thanks!
Rhonda

Thanks Pat. Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped. Uninstalled Reader and Flash as well. Strange thing with Flash, one of my online broker programs provides streaming of CNBC. When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash. I did, and it loaded again with no mention of Flash having already been installed.
Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE). Expanding the window in WE makes it large enough to read. I would still like to find a way to open the files as they are designed to open.
I have done all of the Adobe updates as they have been presented. Microsoft updates load automatically, and restart my computer in the process. I do not look to see what the updates have been. I figure if there was not a need, Microsoft would not make the updates.
[private data removed]

Images Change in Document after Saving

Help! This problem has plagued me in both Pages and Keynote. I have designed a brochure in Pages and used "copy & paste" to place multiple pieces of clipart from another document into the brochure. Once I have everything laid out just as I'd like it, I save the document. I also export it as a PDF or WORD format so that it will be compatible for others to use. After saving and exporting, I close the program. Later when I reopen the document in order to make changes, my graphics have all been replaced by a single random image that has been used somewhere in the document. There isn't a rhyme or reason regarding which image is duplicated, but in every place in the document that had artwork, it is repeated.
As I mentioned this happened in Keynote as well as Pages. In this instance, I was using many photos which I inserted using the media selector (rather than "copy & paste"). When I came back into my project, all the photographs had changed to a single picture. AGGHH.
Am I just not doing something right? Or is this a flaw in the programs?

I never got this odd behaviour.
Most of the time, I don't use copy-paste but dag & drop which stores the picture file in the document in the original format.
When I uses copy - paste, I always get a tiff file in the document's package.
Yvan KOENIG (from FRANCE lundi 15 décembre 2008 15:30:30)

Title 3D Off Center

I used Title 3D for some titles superimposed over a still. I typed the text into the text box and chose the center icon to center the titles. After I made the DVD I noticed my titles were off center and quite noticeably so for the ones that extended across the screen. I went back to the video and saw that the titles were indeed off-center (looking at the title safe rulers). I tried adding one space to the end of each title line and that seemed to correct the problem.
Has anyone had this problem with Title 3D, or is something wrong with my procedure? I searched the threads in this forum and didn't find anything.

Ian, After making the adjustment of adding one space to each line I tried my video on a different TV and DVD player and I concluded that the first TV/Player combination was causing part of my problem. So thanks for suggesting it might be the TV. I'm pretty satisfied with the final results now.
I guess I've learned to look with a critical eye with the aid of the "title safe" rulers at any titles that cover a large part of the screen.
Thanks again.

Is there a Quick way to exactly center Illustrator artboard in work area?

Good Day, Illustrator Mavens:
Many files I receive from clients have their art boards set up way off center within the work area. This would most times not be a problem, but many times I need to scale up their files for more precision for output purposes.
Does anyone know of a way to get an art board back to the original default center of the work space so that when I scale the art board and it's contents I can avoid objects not scaleable because they'll be outside the pasteboard?
Currently working in Illustrator CS 17.1 in Mac OSX 10.8.5
Thank you in advance

Markerline:
Doing what you suggests just centers the view of working on the file and does not physically move the artboard and it's contents to the default center of the work area/pasteboard. In other words, I want to move my artboard back to the exact zero origin as if you were creating a document brand new. I would like to do this so that when I enlarge the items (in my current situation I need to enlarge 1200%) the items fall within my work area.
I have attached a screen shot of what a client gives me.
I know that I could use the art board tool and drag it to what seems like the center, but it may not be exact. Just wondered if there was a quick way.

Off center 4x6 photos

Is it my printer or something else? Printing 4x6 photos with an HP L7590 AIO from iPhoto and the right margin or the top margin is but a sliver depending on whether it's horizontal or vertical. Contacted Hp support and their suggestion was to use HP Photosmart Studio for printing. The margins are more equal with that option but it's a bit more time consuming than printing directly from iPhoto. There must be a setting somewhere for the margins. I thought that maybe by constraining the image to 4x6 would be the answer but the photos still come out off center. Even when printing borderless there is a narrow white margin on one side even with 5x7s. Haven't tried printing a 5x7 without checking borderless so I don't know what the results would be.
I would like to begin with solving the non-centered 4x6 photo printing first.

Thank you LN for your suggestions.
I deleted the .plist file, reset the personal preferences and printed a horizontal 4x6 photo that was previously constrained to 4x6 in iPhoto.
Unfortunately, the top margin on the horizontal print is about 1/16" and the bottom one is 3/16".
The left margin is almost 5/16" and the right side is closer to 1/2".
The paper is 4x6 hp advanced glossy Q7906A and the measurements above are after removing the tear off tab.
The iPhoto library has never been moved from its original location.

Off-center banner

I built a website: www.freedin.org
I used the latest iweb app to build it and latest fetch app to upload it. I used the White Template-Blank page as a format.
Each page has the same bannerin green: Free Din Ahmed.
In the past I have not had a problem with this centered green banner. But now, suddenly, that banner is off-center to the right, with missing letters.
On only one page: Din's Personal Thanks, is the banner correctly centered.
I went to each page and recentered the banner but, after uploading, it's still pushed to the right.
Could someone please look at this site: www.freedin.org and please tell me how I can fix this new problem?
Thanks

What model device do you have, and what versionof iOs running on it?

Off-center page possible?

Is it possible to create a web site in iWeb where the main part of the page is off-center?
(example - www.starbucks.com)
All of the templates automatically put the page in the center of the browser window, and I don't even know if it's possible to change that. If anyone knows anything about this, I'd appreciate the advice.

Changing the alignment of a page is easy!
Publish iWeb site then open /Sitename/PageName.html in Text Edit. A few lines down in the code right after the <body> tag there are two <div> tags that look like this:
<div style="text-align: center; ">
<div style="margin-bottom: 0px; margin-left: auto; margin-right: auto; margin-top: 0px; overflow: hidden; position: relative; word-wrap: break-word; text-align: left; width: XXXpx; " id="body_content">
Change the tags so they look like this. Edit style parameters to taste.
<div style="margin:left(or right); margin-left(or right):XXXpx">
<div style="margin-bottom: 0px; margin-top: 0px; overflow: hidden; position: relative; word-wrap: break-word; text-align: left; width: XXXpx; " id="body_content">

Designs off center of artboard after saving?

Similar Messages

Maybe you are looking for