Desire S, Wildfire S
As I'm coming to the end of my 18 month 600 plan, currently have the Desire having previously had the S620, is there any news on when the Desire S and Wildfire So phones are likely to be replaced/upgraded. Idon't particularly want to upgrade to the Desire S to find it being replaced in the not to distant future.
In the past there has been no "Coming Soon" type announcement for handset changes. We just wake up one morning and it has happened.
There must be one due anytime though, as the Desire/Wildfire S are not the latest kids on the block
AQ.
"Welcome to Royston Vasey - You'll never leave."
Similar Messages
-
Why HTC Desire S and not HTC Wildfire S?
I just love Firefox and have used it almost scince it was born into this world.
It's just the fastest, eaysest and most reliable way to surf the webb, always has been and always will be.
So, now i wanted it for my Android phone as well but i was very dissapointed when i saw that it's still not available for my HTC Wildfire S but it's avaliable for HTC Desire S, why?
Best Wishes from a true Firefox user.'
Ps: Keep up the awesome work, the "www" is free for all and should stay so!Firefox is built with an optimized instruction set (called "Thumb-2") to make it small and fast enough to run on mobile devices. Unfortunately, this optimization is not supported by the processors in many low-end or older Android phones.
We're working on other ways to make Firefox smaller or faster, so someday it might be possible to build a version that works without Thumb-2 and is compatible with these older devices. But for now, Firefox is just not ready to run on those devices. -
Hi, Has anyone ordered the Desire X from BT (Mobile Anywhere) and if so can you tell me what Andriod version was installed. Ice Cream or Jelly Bean. I don't want to upgrade my Wildfire to the Desire X and find I'm behind on the Op sys.
Thanks in anticipation!jad22 wrote:
Hi, Has anyone ordered the Desire X from BT (Mobile Anywhere) and if so can you tell me what Andriod version was installed. Ice Cream or Jelly Bean. I don't want to upgrade my Wildfire to the Desire X and find I'm behind on the Op sys.
Thanks in anticipation!
There's an HTC support website which gives details of future versions of Android for the HTC desire X. Just Google "BT HTC Desire X Android version".
It's better to look for information from them direct than the BT page, but the promises of future upgrade to Android 4.1.1 are vague.
The BT page for BT Total Broadband Anywhere says that the Desire X has Android 4.0 installed (ice cream sandwich?).
There's no chance of upgrading Android on the original Desire which I have, as it's only 512MB ROM, and you must have more than this.
I have been looking into this as my Desire is coming to the time for an upgrade. Is "Jelly Bean" 4.1.1 or 4.2?
Don't know what you have on the Wildfire.
It's surprising that an existing owner of the Desire X hasn't responded yet. -
I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?
The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well... -
Have you too been very disappointed with a lack of desire to satisfy you, their customers?
Hello,
I've been with Verizon four months. At sign-up I did not want the 'Family Base' feature but could not un-enroll from the 3-free months offered. Because I forgot to go online to my account to cancel "Family Base' after the 3-free months I was charged. I caught this in the middle of the second month of being charged (I had never activated the 'Family Base' program). Immediately I called Verizon hoping to get a credit for the $8.75 for 1.75 months of 'Family Base. NO credit was issued! NO willingness at all to issue a credit or leave me feeling good about Verizon!
Yes, I forgot to cancel this unwanted service. But why did I HAVE to enroll in 'Family Base' in the first place?
I expected Verizon to appease me, a new customer, who has only a positive, albeit short payment history, by offering a credit of $8.75 (because I called early enough to get a pro-rated cancellation of the second unwanted month of 'Family Base'). Yes, I can pay $8.75, heck it's only $8.75. On the other hand, for $8.75 Verizon could have a happy and satisfied new customer. Mmmm. I'm feeling like a happy and satisfied customer is not of any interest to Verizon. After all, I chose a two-year contract, silly me.Yes I have been and currently agree with you. I have been a longtime customer and they have no desire to satisfy us because they believe that since they have the largest network we will just accept anything they dish out.
-
Function used in SQL query not showing the desired results
I have created a function that gives me the client id but when i am using the function in the query its not giving me any result i.e. 0 rows but if I execute the function sepreatly and put the result of that function in the qurey it is giving me the desired result please have a look on the following and please reply with you expert opinion:
FUNCTION CODE:
create or replace function j2
(usid in varchar2)
return varchar2
is
cidn_in varchar2(4000) := '';
ls_sep varchar2(1) := ',';
cursor predicate_cidn
is
select
logical_schema_id
from
CLIENT_REGISTRY cr,
MEMBER_ROLE_CLIENT_ASSIGNMENT mrca,
MEMBER m
where
mrca.base_client_id = cr.base_client_id and
mrca.member_id = m.member_id and
cr.schema_in_use_in = '1' and
m.active_status_id = 'A' and
upper(mrca.member_id) = upper(usid);
BEGIN
for GET_CIDN in predicate_cidn
loop
cidn_in := cidn_in || ls_sep || '''' || GET_CIDN.logical_schema_id || '''';
end loop;
cidn_in := substr(cidn_in, 2);
cidn_in := '('||cidn_in||')';
--dbms_output.put_line(cidn_in);
return cidn_in;
END ;
SQL> select j2('qaa@adp') from dual;
J2('QAA@ADP')
('BASE18','SDK1TEST','SEETHA1CONFIG','BASE09','KAREN2','SIVACONFIG','BASE19','SD
K1CTEST','VASU1','KAREN5','EVENTS1CTEST','SDK1','ADA1CONFIG','BASE10','VRB1CONFI
G','CRU2CONFIG','BASE20','SIVATEST','PCOMCONFIG','KP1CONFIG','KAREN4CONFIG','EVE
NTS1TEST','SUZ3CONFIG','DONG2CONFIG','ED2CONFIG','SIVACTEST','APDCONFIG','EVENTS
1CONFIG','ESSCONFIG','SIVA','SDK2CONFIG','ED3CONFIG','RAJ4CONFIG','CBRCONFIG','N
AMRATA2CONFIG','EMIL1','NAMRATA1CONFIG','SDK2CTEST','BVT2CONFIG','MURUGAN1CONFIG
','COB1CONFIG','GABY1TEST','CHR1CONFIG','ED4CONFIG','USE1CONFIG','SDK2TEST','DEM
O1CONFIG','BERNIE1CONFIG','XA1','CAR2TEST','SDK2','ED5CONFIG','PAY1TEST','PAYXCO
NFIG','KP1TEST','SEAN1CONFIG','CAR2CTEST','VASU1CONFIG','SEAN2CONFIG','KP1CTEST'
,'MAU1CONFIG','CONWCONFIG','PAN1CONFIG','MERAJ2','PRA3CONFIG','SEAN5CONFIG','KP1
','PRA4CONFIG','CAR2CONFIG','PRA2CONFIG','SEAN6CONFIG','PRA3TEST','RPT','GABY1CT
EST','SDK3CONFIG','PRA2TEST','SEAN9CONFIG','CAR2','LV1CONFIG','PRA3CTEST','DONG1
CONFIG','TE1CONFIG','MERAJ2CONFIG','VIV1CONFIG','GABY1','SEAN2','PRA2CTEST','PRA
3','RPTCONFIG','PRA4CTEST','SEAN3','MITA1CONFIG','PRA2','RPTCTEST','PCOM1CONFIG'
,'SS2CONFIG','PAY1CONFIG','SEAN7','ANNCONFIG','BASE11','BASE02','LV2CONFIG','RPT
TEST','IMPECONFIG','SUR1CONFIG','SREEK2CONFIG','BASE03','SRINU3CONFIG','BDCONFIG
','JAY1CONFIG','AMMAN1','PRA1TEST','WPGCONFIG','BASE12','MP5CONFIG','MERAJ1','SR
INU2CONFIG','XA1CONFIG','RAJ1CONFIG','WPGCTEST','BASE04','CHRIS','RAJSCONFIG','P
ANKAJ','BASE13','WPGTEST','RAJ3CONFIG','WPG','BASE14','VASU2CONFIG','SRINU1CONFI
G','BASE05','PRA4TEST','VASU1TEST','PRA5CONFIG','NISH1CONFIG','CHRISCONFIG','SDK
3TEST','RAJ3TEST','KP2CONFIG','BASE06','DEFPCONFIG','NISH2CONFIG','CHRISCTEST','
WPSCONFIG','VASU2TEST','BASE15','GABY1CONFIG','PRA5TEST','MITA2CONFIG','BASE07',
'VASU1CTEST','KP2TEST','VASU2CTEST','LAURA3CONFIG','BASE16','CHRISTEST','WPSTEST
','VASU2','KP2CTEST','EVENTS1','BASE17','RAJ2CONFIG','WPSCTEST','BASE08','SREEK1
CONFIG','ADVE','PRA4','SDK1CONFIG','KP2','KAREN1','CRU1CONFIG','WPS')
Now if i put the results (cut and paste )in the query it gives me the results
SQL> select count(*) from baseclient.address_detail where cidn in ('BASE18','SDK1TEST','SEETHA1CONFIG','BASE09','KAREN2','SIVACONFIG','BASE19','SD
2 K1CTEST','VASU1','KAREN5','EVENTS1CTEST','SDK1','ADA1CONFIG','BASE10','VRB1CONFI
3 G','CRU2CONFIG','BASE20','SIVATEST','PCOMCONFIG','KP1CONFIG','KAREN4CONFIG','EVE
4 NTS1TEST','SUZ3CONFIG','DONG2CONFIG','ED2CONFIG','SIVACTEST','APDCONFIG','EVENTS
5 1CONFIG','ESSCONFIG','SIVA','SDK2CONFIG','ED3CONFIG','RAJ4CONFIG','CBRCONFIG','N
6 AMRATA2CONFIG','EMIL1','NAMRATA1CONFIG','SDK2CTEST','BVT2CONFIG','MURUGAN1CONFIG
7 ','COB1CONFIG','GABY1TEST','CHR1CONFIG','ED4CONFIG','USE1CONFIG','SDK2TEST','DEM
O1CONFIG','BERNIE1CONFIG','XA1','CAR2TEST','SDK2','ED5CONFIG','PAY1TEST','PAYXCO
8 9 NFIG','KP1TEST','SEAN1CONFIG','CAR2CTEST','VASU1CONFIG','SEAN2CONFIG','KP1CTEST'
10 ,'MAU1CONFIG','CONWCONFIG','PAN1CONFIG','MERAJ2','PRA3CONFIG','SEAN5CONFIG','KP1
11 ','PRA4CONFIG','CAR2CONFIG','PRA2CONFIG','SEAN6CONFIG','PRA3TEST','RPT','GABY1CT
12 EST','SDK3CONFIG','PRA2TEST','SEAN9CONFIG','CAR2','LV1CONFIG','PRA3CTEST','DONG1
13 CONFIG','TE1CONFIG','MERAJ2CONFIG','VIV1CONFIG','GABY1','SEAN2','PRA2CTEST','PRA
14 3','RPTCONFIG','PRA4CTEST','SEAN3','MITA1CONFIG','PRA2','RPTCTEST','PCOM1CONFIG'
15 ,'SS2CONFIG','PAY1CONFIG','SEAN7','ANNCONFIG','BASE11','BASE02','LV2CONFIG','RPT
16 TEST','IMPECONFIG','SUR1CONFIG','SREEK2CONFIG','BASE03','SRINU3CONFIG','BDCONFIG
17 ','JAY1CONFIG','AMMAN1','PRA1TEST','WPGCONFIG','BASE12','MP5CONFIG','MERAJ1','SR
18 INU2CONFIG','XA1CONFIG','RAJ1CONFIG','WPGCTEST','BASE04','CHRIS','RAJSCONFIG','P
19 ANKAJ','BASE13','WPGTEST','RAJ3CONFIG','WPG','BASE14','VASU2CONFIG','SRINU1CONFI
20 G','BASE05','PRA4TEST','VASU1TEST','PRA5CONFIG','NISH1CONFIG','CHRISCONFIG','SDK
21 3TEST','RAJ3TEST','KP2CONFIG','BASE06','DEFPCONFIG','NISH2CONFIG','CHRISCTEST','
22 WPSCONFIG','VASU2TEST','BASE15','GABY1CONFIG','PRA5TEST','MITA2CONFIG','BASE07',
23 'VASU1CTEST','KP2TEST','VASU2CTEST','LAURA3CONFIG','BASE16','CHRISTEST','WPSTEST
24 ','VASU2','KP2CTEST','EVENTS1','BASE17','RAJ2CONFIG','WPSCTEST','BASE08','SREEK1
25 CONFIG','ADVE','PRA4','SDK1CONFIG','KP2','KAREN1','CRU1CONFIG','WPS');
COUNT(*)
228
BUT if I user the function it gives me no results
0 rows selected and its taking a loon time to reurnThis appears to be a duplicate of the question in this thread
Re: VPD issue Need Assistance ASAP
where I wrote
"Your function returns a single string that happens to have a bunch of commas and quotes in it. An IN list generally requires a list of strings, which your function doesn't return.
You could rewrite the function to be a pipelined table function and then do
select count(*)
from baseclient.address_detail
where cidn in (SELECT cidn
FROM TABLE(<<your pipelined table function>>))
However, I would expect it to be easier not to wrap all this into a function and just have your IN clause be the logic in your predicate_cidn cursor.
Justin
" -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
Table entries not getting displayed in desired format
Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian -
Jdesktop pane is not working as desired
I took code from sun tutorial and added few lines of code, I using Jdesktop and internal frame here. my requirement is that i need to add one panel on Jdesktop pane. however when i tried to add panel, entire code behaved tht is not desired. internal frame not minimized/maximized. please let me know your thoughts and suggestions.
my changes with "My extra code" comment
import javax.swing.JInternalFrame;
public class MyInternalFrame extends JInternalFrame {
static int openFrameCount = 0;
static final int xOffset = 30, yOffset = 30;
public MyInternalFrame() {
super("Document #" + (++openFrameCount),
true, //resizable
true, //closable
true, //maximizable
true);//iconifiable
setSize(300,300);
//Set the window's location.
setLocation(xOffset*openFrameCount, yOffset*openFrameCount);
import javax.swing.JDesktopPane;
import javax.swing.JLabel;
import javax.swing.JMenu;
import javax.swing.JMenuItem;
import javax.swing.JMenuBar;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.KeyStroke;
import java.awt.event.*;
import java.awt.*;
public class InternalFrameDemo extends JFrame
implements ActionListener {
JDesktopPane desktop;
public InternalFrameDemo() {
super("InternalFrameDemo");
int inset = 50;
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
setBounds(inset, inset,
screenSize.width - inset*2,
screenSize.height - inset*2);
desktop = new JDesktopPane(); //a specialized layered pane
// My extra code
desktop.setLayout(new BorderLayout());
JPanel panel = new JPanel(new BorderLayout());
panel.add(new JLabel("Dummy Label"),BorderLayout.CENTER);
desktop.add(panel, BorderLayout.CENTER);
// my extra code ended here
createFrame(); //create first "window"
setContentPane(desktop);
setJMenuBar(createMenuBar());
desktop.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
protected JMenuBar createMenuBar() {
JMenuBar menuBar = new JMenuBar();
JMenu menu = new JMenu("Document");
menu.setMnemonic(KeyEvent.VK_D);
menuBar.add(menu);
JMenuItem menuItem = new JMenuItem("New");
menuItem.setMnemonic(KeyEvent.VK_N);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_N, ActionEvent.ALT_MASK));
menuItem.setActionCommand("new");
menuItem.addActionListener(this);
menu.add(menuItem);
menuItem = new JMenuItem("Quit");
menuItem.setMnemonic(KeyEvent.VK_Q);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_Q, ActionEvent.ALT_MASK));
menuItem.setActionCommand("quit");
menuItem.addActionListener(this);
menu.add(menuItem);
return menuBar;
public void actionPerformed(ActionEvent e) {
if ("new".equals(e.getActionCommand())) { //new
createFrame();
} else { //quit
quit();
//Create a new internal frame.
protected void createFrame() {
MyInternalFrame frame = new MyInternalFrame();
frame.setVisible(true); //necessary as of 1.3
desktop.add(frame);
try {
frame.setSelected(true);
} catch (java.beans.PropertyVetoException e) {}
protected void quit() {
System.exit(0);
private static void createAndShowGUI() {
JFrame.setDefaultLookAndFeelDecorated(true);
InternalFrameDemo frame = new InternalFrameDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
public static void main(String[] args) {
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}Thanks,Please read the relevant parts of the APi for JDesktopPane, DesktopManager and JLayeredPane to understand the code.import java.awt.event.ComponentAdapter;
import java.awt.event.ComponentEvent;
import javax.swing.*;
public class PanelAtBottom {
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
new PanelAtBottom().makeUI();
public void makeUI() {
final JDesktopPane desktopPane = new JDesktopPane();
for (int i = 0; i < 5; i++) {
JInternalFrame internalFrame = new JInternalFrame("Frame " + i);
internalFrame.setIconifiable(true);
internalFrame.setBounds(i * 10, i * 10, 200, 200);
internalFrame.setVisible(true);
desktopPane.add(internalFrame);
final JPanel panel = new JPanel();
panel.add(new JLabel("Label"));
panel.add(new JButton("Button"));
desktopPane.add(panel, JLayeredPane.DEFAULT_LAYER, -1);
desktopPane.addComponentListener(new ComponentAdapter() {
@Override
public void componentResized(ComponentEvent e) {
panel.setSize(desktopPane.getSize());
desktopPane.setDesktopManager(new DefaultDesktopManager() {
@Override
public void iconifyFrame(JInternalFrame f) {
super.iconifyFrame(f);
desktopPane.moveToBack(panel);
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(desktopPane);
frame.setSize(600, 300);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
}db -
How to connect the IPad 2 with an HTC desire HD (mobilephone)
Hello,
I need your advice. I'm trying to connect my IPad 2 with may HTC desire HD via bluetooth. The tools are paring but do not conncet alt least. What can I do?What can I do?
Nothing. iOS does not support pairing to devices other than keyboards, headphones and headsets. -
Format-number,decimal not giving desired output for PO Print report XSL-FO
Hi All,
My requirement was to get the Unit price in european format which is 10.000,00
Iam getting it as 10000,00 but the client needs the thousand's seperator.
if have used the decimal seperator but iam getting the Unit Price value as 'NAN' when i submit it for an international language like Italian or Spanish
This is what i have done
set the decimal format
<xsl:decimal-format name="euro" decimal-separator="," grouping-separator="."/>
<xsl:value-of select="format-number(UNIT_PRICE, '#.###,####', 'euro')"/>
This gives the desired output when i select the US language.
While submitting through the conc request
If i change the Numeric char to '.,' by clickin on Language settings..It works great
I have tried to use the replace function but the syntax is not correct
format-number(replace('UNIT_PRICE',',','.'), '#.###.###.###,####', 'euro')
Any Help would be greatly appreciated.
Thanks
MirzaHi Mirza,
I'm struggling having the same problem. Have you found any solution?
Best regards
Kenneth -
Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
JukkaHi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights. -
Without using SubReport or SQL Command in Main Report, get desired results without duplicating
It seems so simple. I just need the cost, at a certain time (based on a parameter), for each item. I wrote a SQL Command that works beautifully, but when it connects to the existing report, it slows to a horrible crawl and cannot be used for tables with over 4 million records. Here is the SQL Command that provides the desired results:
SELECT TOP 1 WITH TIES "INVENTITEMPRICE"."ITEMID", "INVENTITEMPRICE"."PRICETYPE", "INVENTITEMPRICE"."MARKUP", "INVENTITEMPRICE"."PRICEUNIT", "INVENTITEMPRICE"."PRICE", "INVENTITEMPRICE"."PRICEQTY", "INVENTITEMPRICE"."ACTIVATIONDATE", "INVENTITEMPRICE"."DATAAREAID"
FROM ("AX09PROD"."dbo"."INVENTITEMPRICE" "INVENTITEMPRICE" INNER JOIN "AX09PROD"."dbo"."INVENTTABLE" "INVENTTABLE" ON (("INVENTITEMPRICE"."ITEMID"="INVENTTABLE"."ITEMID") AND ("INVENTITEMPRICE"."DATAAREAID"="INVENTTABLE"."DATAAREAID")))
WHERE ("INVENTITEMPRICE"."DATAAREAID"=N'TMC' AND "INVENTITEMPRICE"."PRICETYPE"=0 AND "INVENTITEMPRICE"."ACTIVATIONDATE"<={?As Of Date})
ORDER BY ROW_NUMBER () OVER(PARTITION BY "INVENTITEMPRICE"."ITEMID" ORDER BY "INVENTITEMPRICE"."ACTIVATIONDATE" DESC)
I've attached the report with saved data. However, when I remove the restrictions of just certain items, it is unusable as it is SO SLOW!
I can also get the desired results from using a subreport but it takes forever to export due to the number of records/items. Whenever possible, I avoid subreports for this reason. I've attached that report with data as well.
Please be patient as I'm not savvy in SQL, but decent in generating reports. What am I doing wrong? This seems SO simple. The premise is that I want the corresponding information based on the date entered: If the date entered is 3/15/2014, the result should be 91.15 as indicated below. I'd simply like this value to be placed in a formula per item.
Item 80014:
Activation Date
Cost Price
6/2/2014
104.43
4/1/2014
91.58
3/1/2014
91.15
2/1/2014
92.89
1/1/2014
93.57
Any assistance would be GREATLY appreciated!
Thanks!
Teena
Update: I was unable to attach the reports with .rpt or .txt extensions. There were well under 1MB. Any suggestions?hi Teena,
if you're going the inline subquery route, try something like the following...the last line in the sub-query 'where' clause should in theory take care of matching the correct price based on relating the item id's between your cost price & inventory data. this should leave you with distinct values for each itemid then. hopefully it won't error out as i'm just guessing on the syntax.
SELECT DISTINCT
"INVENTTABLE"."ITEMID",
"INVENTTRANS"."DATAAREAID",
"INVENTTRANS"."DATEPHYSICAL",
"INVENTTRANS"."QTY",
"INVENTTABLE"."ITEMGROUPID",
"INVENTTABLE"."ITEMNAME",
"INVENTTRANS"."TRANSREFID",
"INVENTTRANS"."STATUSISSUE",
"INVENTTABLE"."ITEMTYPE",
"INVENTTRANS"."TRANSTYPE",
"INVENTTRANS"."RECID",
"INVENTTRANS"."DIRECTION",
SELECT TOP 1 "INVENTITEMPRICE"."PRICE"
FROM "AX09PROD"."dbo"."INVENTITEMPRICE" "INVENTITEMPRICE"
WHERE "INVENTITEMPRICE"."DATAAREAID" LIKE 'TMC%'
AND "INVENTITEMPRICE"."PRICETYPE"=0
AND "INVENTITEMPRICE"."ACTIVATIONDATE"<={?As Of Date}
AND "INVENTITEMPRICE"."ITEMID" = "INVENTTABLE"."ITEMID"
ORDER BY "INVENTITEMPRICE"."ACTIVATIONDATE" DESC
) AS ITEMPRICE
FROM
"AX09PROD"."dbo"."INVENTTABLE" "INVENTTABLE"
LEFT OUTER JOIN "AX09PROD"."dbo"."INVENTTRANS" "INVENTTRANS"
ON ("INVENTTABLE"."DATAAREAID"="INVENTTRANS"."DATAAREAID")
AND ("INVENTTABLE"."ITEMID"="INVENTTRANS"."ITEMID")
WHERE
"INVENTTRANS"."DATAAREAID" LIKE 'TMC%'
AND (("INVENTTABLE"."ITEMGROUPID" LIKE 'RAW%') OR ("INVENTTABLE"."ITEMGROUPID" BETWEEN '000' AND '999') OR ("INVENTTABLE"."ITEMGROUPID" LIKE 'Ship_Box'))
AND "INVENTTABLE"."ITEMTYPE" IN (0,1)
ORDER BY
"INVENTTABLE"."ITEMGROUPID",
"INVENTTABLE"."ITEMID",
"INVENTTRANS"."DATEPHYSICAL" ASC
Message was edited by: Jamie Wiseman -
I wish to export several frames from iMovie as if they were images (like JPEGs or TIFFs). Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to 'add a freeze frame' to isolate the desired frames but I can't export it. Thanks.
Ach... I found a solution thanks to previous posts which came to light after I'd posted what was obviously a question that had been asked before.
-
Links redirecting to several other websites. eg., mastermarketplace.com, consumersurveygroup.org, and eclickz.com. When closing these pages, I sometimes find my desired webpage behind them. Or I have to try again to get the proper webpage.
Thank you,
PamelaLinks redirecting to several other websites. eg., mastermarketplace.com, consumersurveygroup.org, and eclickz.com. When closing these pages, I sometimes find my desired webpage behind them. Or I have to try again to get the proper webpage.
Thank you,
Pamela
Maybe you are looking for
-
Help! We have two iPhones, each with an iCloud account as my wife and I have different contacts (some are the same though), text and e-mail requirements. However, my Win 7 PC will only allow one instance of iCloud Contol Panel to run at any one time
-
SQL execution taking long time
All, I have a read only VO and i have configured the VO to print the SQL getting executed along with bind parameters. The SQL is taking a lot of time to execute when running in web. When i run the generated SQL in toad it takes close to 30.6 seconds,
-
Is libiostream broke in Solaris 10?
The following code: ------cut-------------------------------------------------------------------------- #include <stdio.h> #include <stdlib.h> #include <sys/types.h> // use of getpid #include <unistd.h> // use of getpid #include <signal.h> #include <
-
Command line for credential manager
can anyone help me in getting command line for credential manager ... ? Thanks, VRAGHU
-
How do I change the look of the cropping tool
How do I change the look of the cropping tool