Desired and expected Belle on E6

I (guessing most of E6 users) want to see the following on E6 Belle home screen together:
- Calendar (small or only notice text but on home screen not elsewhere)
- Email notifications.
- Small hour widget with date (also we were seeing "Mon, Tue, .." but not now!). Even hour widget is not necessary for me we also see the hour upper of the screen but date must be.
- Battery status (not a widget form, Anna's seven line with percentage was good)
- And enough space for web browser, maps, camera, weather forecast etc. 4 small icons.
E6 screen is small and Belle widgets are big. We are using our phones for information, communication. These are important above and reason for choising E6. Please consider our complaints. Thanks in advance.

Similar Messages

User Exit for validating overall limit field and expected limit field-ME2xN

Dear Gurus,
Can you please suggest me any user exit or BAdi to validate the overall limit field and expected limit field in transaction ME2xN.
Or any other way to to achieve this functionality in ME2xN.
Our Requirement is while raising a service PO in the Limits tab the 'Overall limit' should be same as 'Expected Value', at present the user can enter overall limit greater than 'Expected Value'.
Regards,
Priyank Joshi

this will not work. you cannot add another structure (AUFK) on top of CEBAN. all characteristics have to be of one structure and since you want to release a PR it has to be CEBAN. before attempting to program something around that why do you not go to tx. OLME -> PR -> Release Strategy -> With Classfication -> Release Strategie and run it in a simulation mode. you will then see how it reacts.
there's a white-paper on service.sap.com explaning in detail release-strategies. it's a good one and a good read too!

I am doing a book. Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

No
All photos frames must contain photos or you can not order the book
LN

I built a DAQ vi in the labview6.1 and i compiled it to a dll.And then I wanted to call it and expected it pass acquired data to visual c++

I built a DAQ vi in the labview6.1 to acquire four channels'data(use pci_6110E) .And i compiled it to a dll.I wanted to use visual c++ to call it and expected it pass acquired data to visual c++.

Hello
If you are using Visual C++, then I would recommend using the NI-DAQ function calls instead of having labview layer in there. YOu can pretty much accomplish any task using the NI-DAQ function calls that you can by using the LabVIEW DAQ vi's. Plus this way you wont have to worry about passing the correct data type from LabVIEW into C++. You can find the examples for using these function calls under ../NI-DAQ/Examples/.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Ok, so i downloaded three albums (sic) and discovered the next day that on two of them there were songs which did not completely download. I quickly reported it and expected a reply within 24 hrs but Ive heard nothing back and now I cannot re-report it .

ok, so i downloaded three albums (sic) and discovered the next day that on two of them there were songs which did not completely download. I quickly reported it and expected a reply within 24 hrs but Ive heard nothing back and now I cannot re-report it because it says Ive already reported it. Should I just wait? It's been three days. Thanks, mj

You can try to contact iTunes Store Support via http://www.apple.com/support/itunes/contact/
Click the big blue button and follow the prompts.
You can also try downloading the songs again. Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

When I try to run my keynote presentation through a projector, it fails to fun as desired and instead show the "Rehearse Slideshow" view instead. How do I sort this out?

When I try to run my keynote presentation through a projector, it fails to fun as desired and instead show the "Rehearse Slideshow" view instead. How do I sort this out?

I believe you need to go into System Preferences > Displays > Arrangement so the image you want appears on the projector.

After finally downloading my MiniDV tapes to iMovie 10.0.6 (Yosemite), I see that there is no iDVD (why did I buy a new Superdrive for my new MacMini). So, can I buy an old iLife 9 and expect it to load to the new machine. This is NOT progress!!

After finally downloading my MiniDV tapes to iMovie 10.0.6 (Yosemite), I see that there is no iDVD (why did I buy a new Superdrive for my new MacMini). So, can I buy an old iLife 9 and expect it to load to the new machine. This is NOT progress!! HELP

Hello!
They're still being sold in some places: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dsoftware&field-keywo rds=ilife+09&sprefix=iLife+09%2Caps%2C194&rh=n%3A229534%2Ck%3Ailife+09
However, do you absolutely NEED iDVD? There are alternatives, like Burn (free): http://burn-osx.sourceforge.net/
I suggest you try it out since it's free. Maybe it'll be enough.

Operation scrap and expected yield variance

Hello guys,
I have a question on the operation scrap and the expected yield variance.
I have a product which has four operations, and on one of the operations (2nd operation) the operation scrap of 10 % is maintained.
So, I have created a production order for 100 Pcu2019s.
For the confirmation, I confirm first operation with the total order qty (100Pcs). After the confirmation the expected yield of variance of 10 Pcu2019s is set on the order.
I just wanted to understand why the expected yield variance is set with planned operation scrap. According to my understanding, the expected yield variance is only set if a scrap value is mentioned in the confirmation.
I am having a problem because my 4th operation is a milestone operation ( I confirm 2Nd, 3rd and 4th operation at a time.
I donu2019t use the back flushing option coz I do my GR in MIGO.
So here is the situation.
I created and order for 100 Pcu2019s and I confirm the first operation for 100 Pcu2019s
Second milestone confirmation (2nd, 3rd, 4th ops) for 40 Pcu2019s u2013 GR is done after that.
Third milestone confirmation (2nd, 3rd, 4th ops) for 40 Pcu2019s u2013 GR is done after that.
Fourth milestone confirmation (2nd, 3rd, 4th ops) for 15 Pcu2019s but I can only receive 10 Pcu2019s because of the operation scrap and expected yield variance.
Thanks,
sashi vardhan

Dear Shashi,
Since you have maintained 10% as operation scrap system considers that 10% of your total qty in the opration is scrap material and hence system allows only confirmation of 90 components only.
This is std SAP behaviour.
Regards
Suri

I filled out the form for Mountain Lion upgrade in the morning and expected to get the codes... It is 10 pm and no codes. Is it normal?

I filled out the form for Mountain Lion upgrade in the morning and expected to get the codes... It is 10 pm and no codes. Is it normal?

If it was the contact form for the forum mod team then it is normally about 3 working days as all mails are dealt with strictly in turn also if it was that form you would have had a confirmation immediately you sent the contact form as it opens a new web page with a reference number on it and also you will be personally contacted by phone or email
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

The next E73 our wishes and expectations

Hi, I invite you to exhibit wishes and expectations about the next model E73 ().
So hopefully will be taken into consideration our view as: Nokia customers.
So Lets help Nokia
1. Larger screen
2. More qualitatively material
3. Decent software
4.
5.

1. bigger screen,
2. coninue with excellent build quality of E71 (my phone now).
3. cradle so i can charge it while standing. in the cradle, offer a speaker box as well so i can listen to music more confortably.
4. double speaker so i can use the speakerbox for calls.
5. a phonbook back up that allows you to save all of the contact info, even when i edit the title of the contact above the name or number, ie,Telephone (work) changed to 0800-1630, I want this detail to remain if i have to back up and reinstall any phonebook data.
5. contact app that allows me to add any network contact to it, like gmail, or skype or yahoo. make a super duper messaging/contacts app that we can use, with video call capability over the sip/google, skype, yahoo, msn etc. so we only have to have one app for everything.
and many more things!
Nokia E65, E71-2 (30) [410.21.010 RM-357]

Application Supersedence not working as I want and expect!

Hello,
I need help to find out how to properly deploy an upgraded application using the SCCM 2012 Application supersedence.
What I have
One application in production with version 1.0. Let us call it APPL-BLUE1.0
New application of the same product with version 2.0. Let us call it APPL-RED2.0
What I want to achieve (the goal)
Users should be notified via the Software Center that a new update is available. The new update should not be installed until the user is ready and manually triggers the installation via the Software Center.
My configuration settings
On application APPL-RED2.0 I have gone to Properties -> Supsersedence and added the APPL-BLUE1.0 to the Supsersdence list. Replacement Deployment Type is configured (set to the Deployment type for the APPL-RED2.0) and
the Uninstall checkbox is checked (to uninstall the APPL-BLUE1.0 deployment type first).
Install behaviour for APPL-RED2.0 is "Install for system" and "Whether or not a user is logged on" with Normal visibility.
Then I create the Deployment which I have tried three different ways.
Action: Install, Purpose: Available, "Automatically upgrade any superseded versions of this application"
unchecked.
Action: Install, Purpose: Available, "Automatically upgrade any superseded versions of this application" checked.
Action: Install, Purpose: Required, "Automatically upgrade any superseded versions of this application" checked (forced, greyed out).
What happens
The application is not automatically made available in the users Software Center at all. No notification is presented and the user has to access the installation by looking in the Application Catalogue
first. Once found in the Application Catalogue the installation runs without problems but this means that the user must somehow know there is a new version available through other means.
The application is automatically installed (without regard to whether or not the application is in use) on the client and a notification is presented on the users machine (Software Center).
Exactly the same result as for #2.
This conflicts with what I want to achieve. I want a notification and that the application is automatically made available for installation in the Software Center but I do not want it to automatically upgrade but rather let the user initiate the installation
whe he or she is ready (i.e. when the application is not in use).
Please point me in the right direction in order to accomplish this.
Thank you.
Sindre

Have you tried changing the application deployment evaluation cycle to increase the speed the update is detected?
also with the notification issue, I have a similar problem and have a script in place. Our business rules are to install the application asap giving the user 6 mins to close it. but this script could easily be changed to allow it to wait non stop.
Or maybe you could set a requirement for the deployment type, a custom script that checks if the application is running, but I am not sure on what cycle the application will evaluate this. or if it will evaluate it then download the application (leaving
a window for the application to be run)
Also in case it is not obvious I have removed functions and keywords. but this should give you an idea of how to achieve your desired results
'Check if current version
if CheckMSIVersion("{removed}","removed") = 1 then
wscript.quit(0)
end if
'sets path of script
strScriptDir = getParentDirectory
intACProcesses = CountACProcesses
'Check if running
if intACProcesses >= 1 then
'runs warning HTA
wshShell.Run ("""" & strScriptDir & "\BeforeInstallAlert.hta """),3,False
'Untill app is closed keep activating alert and checking to see if it is running
const timeout = 360000
const timepoll = 15000
do while intACProcesses >= 1 and i < timeout
intACProcesses = CountACProcesses
if intACProcesses >= 1 Then
wscript.sleep timepoll
end if
i=i+timepoll
wshshell.AppActivate "Appname Upgrade Alert"
Loop
end if
'Kill AC
killProcesses("appname%")
'Kill HTA processes
killProcesses("mshta.exe")
'Install new and record exit code
intExitCode = WshShell.Run("msiexec /i """ & strScriptDir & "\removed.msi"" /qn",0, true)
'if install fails exit with exitcode
if intExitCode <> 0 then
wscript.quit(intExitCode)
end if
'Run New client
WshShell.Run("""" & findACProgramDir & "removed.exe"""),1,false
'Run finished HTA
wshShell.Run ("""" & strScriptDir & "\AfterInstallAlert.hta"""),3,False
'Exit with code
wscript.quit(intExitCode)
Quote by andhey "hmm ill try it later, i accidentally deleted all my tv shows when trying to delete a word document lmao"

How can I compare the actual and expected values in Unit testing when they are XML files?

I have created a unit test for a method in VS 2008. My expected value and actual value are XMLs. Therefore though the output is same as I expect it gives an error as I am doing string comparison now. How can I compare these 2 XMLs in expected output and
actual output format in Unit Testing?
mayooran99

In unit test, when you want to validate XML files, you feed them into the class / struct that you want to feed the XML into and compare the values there (You don't just feed it in XMLReader and feed it line by line, right? But if it really is, that's how
you should also test it in unit tests).
In short, how you'd use the XML in your code, that's how you should test it in unit test.

BAPI_PO_CHANGE - changing overall limits and expected value to 0.

Hi,
I created a normal purchase order with a service item is srm (the overall
limit and the expected value are filled). In R/3 system the corresponding
PO got created.
After that, in SRM we change the overall limit and the expected value to zero.
In R/3 system the net price is updated, but the overall limit and
the expected value are not updated. Could you please help me witht this?
Thanks in Advance,
Best Regards,
Vidya
Edited by: Vidya K Moorthy on Mar 18, 2009 3:06 PM

Finally found the answer.
BAPI_PO_CHNAGE does not support this functionality to delete limits.

Nokia suite and updating bella software

when i connect my nokia n8 to my pc and use the pc suite, the suite just works for a while, and then I get a message that it has stopped working. Also, whenever I go to 'software update' on the suite, I am not given a list of softwares to update for my phone.why? I want to update my phons's software to belle.I need help.

Hello @baby15,
Have you tried the Nokia Suite? That is what you need and via the link below you can
download it to your computer. Then follow the instructions and everything should
go smoothly for you. If you have any more questions, feel free to ask!
http://europe.nokia.com/support/product-support/nokia-ovi-suite
-vvaino
#SwitchToLumia

Identifire expected error and    ) expected error

I am extreamly new to java and have what most people(but me) would consider a rather simple assignment.
I have attempted to write a simple mortgage calculator with a GUI. When I attempted to compile I got the following errors
java:99 <identifire>expected
public void buttonMouseClicked(java.awt.event.mouseEvent)
java:128 ')' expected
My code is below
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class ScurryMortcalc1 extends JPanel
     private JButton button1;
     private JTextField textField1;
     private JTextField textField2;
     private JLabel component4;
     private JLabel component5;
     private JTextField textField3;
     private JLabel lable3;
     private JTextField textField4;
     private JLabel lable4;
     public ScurryMortcalc1()
          //construct components
          button1 = new JButton ("Calculate Payment");
          textField1 = new JTextField (5);
          textField2 = new JTextField (5);
          component4 = new JLabel ("Principal");
          component5 = new JLabel ("Interest Rate");
          textField3 = new JTextField (5);
          lable3 = new JLabel ("Term in Yrs");
          textField4 = new JTextField (5);
          lable4 = new JLabel ("Monthly Payment"); // should not be able to input text into this field
          //adjust size and set layout
          setSize (new Dimension (496, 182)); //<--- changed
          setLayout (null);
          //add components
          add (button1);
          add (textField1);
          add (textField2);
          add (component4);
          add (component5);
          add (textField3);
          add (lable3);
          add (textField4);
          add (lable4);
          //set component bounds (This will put everything exactly where you want it)
          button1.setBounds (34, 5, 100, 20);
          textField1.setBounds (35, 39, 102, 25);
          textField2.setBounds (36, 75, 100, 25);
          component4.setBounds (171, 39, 100, 25);
          component5.setBounds (170, 75, 100, 25);
          textField3.setBounds (37, 110, 100, 25);
          lable3.setBounds (171, 110, 100, 25);
          textField4.setBounds (37, 140, 100, 25);
          lable4.setBounds (169, 140, 100, 25);
     //<--- create a method that will activate the components
     public void initComponents() {
        //<---change text/mouse listener to action listener
        //<--- TextListener is not supported in JTextField (see my examples)
        //<--- MouseListener is cumbersome
        //<--- you can also use other listeners supported in Swing (see Java Tutorials)
        textField1.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
         button1.addActionListener(new ActionListener() {
                 public void actionPerformed(ActionEvent e) {
         textField2.addActionListener(new ActionListener() {
                 public void actionPerformed(ActionEvent e) {
         textField3.addActionListener(new ActionListener() {
                 public void actionPerformed(ActionEvent e) {
    public static void main (String[] args)
         //<---do this sequence
         ScurryMortcalc1 panel = new ScurryMortcalc1();
         panel.initComponents();
          JFrame frame = new JFrame ("JPanel Preview");
          frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
          frame.getContentPane().add (new ScurryMortcalc1());
          frame.setSize(600,400); //<--- added
          frame.setVisible (true);
public void button1MouseClicked(java.awt.event.mouseEvent )
          String Principal_str = textField1.getText();
               double Principal = double.ValueOf(Principle_str).doubleCalue();
              String interestRate_str = textField2.getText();
              double interestRate = (double.valueOf(interestRate_str).doubleValue()) / 100+1;
              string Term_in_yrs_str = textField3.getText();
              double Term_in_yrs_str = double valueOf(Term_in_yrs_str).doubleValue();
              double Calc = (double) Math.pow(interestRate, Term_in_yrs);
              java.text.DecimalFormat dfm = new java.text.DecimalFormat("#,###.00"); // formats numbers to two places after the decimal
              double Monthy_Payment = (Principal * Calc * interestRate - 1)) / (12 * Calc -1));
              String Monthy_Payment_str = dfm.format((Monthy_Payment)));
                  textField4.setText(Monthly_Payment_str);
          try {
               initComponents();
          catch (Exception e) { //<---add bracket
               e.printStackTrace();
}

A bunch of syntax errors: double is not the same as Double. string is not the same as String. You have too many )'s. mouseEvent is not the same as MouseEvent. And you need to use a variable name in the button1MouseClicked method declaration - for example public void button1MouseClicked(java.awt.event.mouseEvent event)

Desired and expected Belle on E6

Similar Messages

Maybe you are looking for