Desk jet 2540

Hi,
Our router broke so we changed it but we can't connect to the desk jet with Iphones Macbook or desktop Mac at all, they all worked before the router stopped working.
We tried turning everything off and rebooting but without success.
We then tried reinstalling but nothing finds the desk jet,we also ran a test on the desk jet and the report says it's not connected but can see our broadband network.
Can you please help I'm at a loss?
Thanks 
Colin

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Connecting iPad to desk jet 2540 printer

    How can I connect my new hp desk jet 2540 printer to my iPad as the web page dose not work and there dose not seem to be any other way as an iPad dose not have a cd rom.

    Hi,
    If your router support WPS (Wireless Protected Setup), you may connect it to your network using this method, you may find the steps below:
    Method one: Push buttonFollow these instructions to connect using the Push button method on your printer control panel.
    On the printer control panel, press and hold the Wireless button ( ) for more than three seconds. The Wireless Status light starts blinking.
    Press the WPS button on your router. The printer begins a timer for approximately two minutes while a wireless connection is established.
    Method two: PINFollow these instructions to connect using the PIN method on your printer control panel.
    On the printer's control panel, press the Wireless button ( ) and the Start Copy Black button ( ) at the same time. The Network Configuration page prints.
    Find the WPS PIN printed at the top of the page.
    On the printer control panel, press and hold the Wireless button ( ) for more than three seconds. The Wireless Status light starts blinking.
    Open the configuration utility or software for the wireless router or wireless access point, and then enter the WPS PIN.
    NOTE: For more information about using the configuration utility, see the documentation provided with the router or wireless access point.
    Wait about 2 minutes. If the printer connects successfully, the wireless light stops blinking but remains lit.
    If your router does not support WPS, a computer is required for its network configuration. use any Windows PC or a Mac to connect it for the first time by following these steps:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03820126&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Desk jet 2540 not printing from iPad

    Hi , I've just bought a Desk jet 2540. It was printing from my iPad with no problems this morning but now does not. The iPad can see the printer and the printer is displaying a solid blue light on the wireless button. After printing a test page I can see that the printer is connected to my wifi with and 'excellent' signal quality. Can you help me please?
    Kind regards,
    Lee

    Hello @Lom111,
    Thank you for visiting the HP Support Forums! I understand you are not able to print from your iPad to your HP Deskjet 2540. Your printer is still on the wireless network, but when you attempt to print nothing happens.
    I would like you to start troubleshooting here: Printing Over a Wireless Network with Apple's AirPrint FAQs, once on the page please select the 'No AirPrint Printers Found' section.
    Let me know the outcome, I look forward to hearing from you.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Scanning feature on desk jet 2540 does not work with drivers 990c

    Hello, 
    I reset my computer a few weeks ago ( acer with vista home edition)  . and after i did that my printer driver software stopped working, when i tried to reinstall it. so i have to install with the 990c printer drivers. It prints perfectly BUT the scanner is not recognized at all. 
    the original printer software is not installed on my computer because when its installed the drivers for 990c does not work. once i remove the original HP. Desk Jet Software and install the drivers it works perfectly. 
    Can someone please tell me of a work around to get the scanner portion to work properly 

    Hi @Chayda ,
    I see that you are having issues trying to scan with the Deskjet 990c drivers. When the full software for the printer is installed, the Deskjet 990c driver won't work. I will certainly do my best to help you.
    The Deskjet 990c drivers are preinstall print drivers only. To be able to print and scan, you would have to install the Full Feature Software and Drivers for the Deskjet 2540.
    Here is the URL to download, save and then ran the latest drivers.
    HP Deskjet 2540 All-in-One Printer Drivers.
    Select your operating system, click next and click on the software to download and install.
    You should be able to have more then the one driver installed for the printer and still be able to print with either one.
    To use an alternate print driver for HP printers in Windows Vista:
    1. Click on the Start menu.
    2. Click on Printers.
    3. Click on Add Printer.
    4. Select HP from the first list.
    5. Select Deskjet 990c from the second list or use the Deskjet 450 driver.
    6. Click Next.
    7. Click Finish.
    8. Click Apply.
    9. Click OK to close the window.
    Then you should have the two drivers listed again in the Printers folder.
    You can set the Deskjet 990c or the Deskjet 450 driver as the default printer for printing, when you want to scan select the Deskjet 2540.
    Download and run the Print and Scan Doctor if you are still having issues using the alternative driver. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    If you need further assistance, just let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hi I have an hp printer desk jet 2540 series

    I have a hp printer wireless 2540 series and I want to no how I can print from my iPad while on the Internet, as it seems I can only front if my iPad is not connected to the Internet?

    If you have a Wifi network, the printer has to be connected to the network instead of using Wireless Direct connection.
    Check page 48 on the User Guide 
    Here's the link on how to make it work: Printing Over a Wireless Network with Apple's AirPrint FAQs

  • I need detailed instructions for scanning to my iMac using my hp desk jet 2540.

    I need detailed instructions for scanning to my imac, using the HP Deskjet 2540.

    Follow the instructions in this article, http://support.apple.com/kb/ht4505
    I double checked and your scanner is supported.

  • Help! Can I set up desk jet 2540 on iPad

    Hi can anyone tell me if I can set my deskjet all in one 2540 up on my iPad mini? I don't have a disc drive to put the setup cd into and the installation website it gives you in the box just comes up with an error, I think maybe because I can't set it up from my iPad?

    Hi Bellesy,
    There are several ways of printing from your iPad. We just have to make sure that the printer and the iPad are connected to the same network.
    Check this link: Printing Over a Wireless Network with Apple's AirPrint FAQs

  • How do I set up wireless printing between my desk jet 2542 and my computer?

    how do I set up wireless printing between my desk jet 2542 and my computer?

    Hello danamaple,
    Welcome to the HP Support Forums!
    Depending on the Operating System installed on the computer, setting up the Deskjet 2540 can be done different ways. The easiest and most popular method is to use a USB cable and the printer software to setup wireless on the printer.
    Installing the Printer Software for a Wireless Network Connection<---
    This guide should provide the needed information for you to setup the printer on the network. Please let me know if you have anymore questions.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

    I cannot detect my wireless HP desk jet 3520 printer from my iPad? 

    I can't find an Arris router with that model number, are you sure it is not a TG862?
    Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

  • Help with HP desk jet F4435 on MacBookPro

    I tried installing my HP desk jet F4435 with the disc that came with the printer. I received a "successful" message. It wouldn't print. Then I uninstalled the printer and tried just plugging in the USB to connect it. Tried printing and receieved yet another error message.
    HELP!

    Some hp driver software for your printer here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=&sw_l ang=&product=304431#N207
    If needed, gutenprint 5.2.9 can be obtained here:
    http://gimp-print.sourceforge.net/MacOSX.php
    Many network printers do not require an explicit driver, or can use "Generic". They accept standard protocols and can be printed to directly. If the printer can be discovered automatically and appears in the list of available printers, it should determine what driver is needed and go fetch any needed driver for you.

  • Can not open pdf after saving scan from desk jet 3050

    I can open pdf file sent to me but I can not open scanned pdf files I scanned with my desk jet 3050 J610

    Hi Marymae07,
    Welcome to the HP Support Forums! I see you are not able to open up a saved pdf file once you save the scan with your HP Deskjet 3050.  To better assist you, can you please leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. What program are you using to scan, are you using the HP software or another program?
    3. Do you get any error messages when you attempt to save as pdf file?
    4. Are you able to save the scan in another format like jpeg?
    I will watch for your reply, so we can begin troubleshooting.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Help with printing photos on photo print paper with Desk-jet 3050A

    Hello I am in need of some advise regarding my desk-jet 3050A printer, the problem is that I cant seem to print pictures on to my glossy photo print paper; I can print pictures onto standard A4 plain paper but the pixels have blurred slightly.
    I cant seem to find any accurate advise regarding which photo printer paper is compatible with my printer and how to actually print a picture onto both plain paper/photo paper at a good quality, any help would be appreciated, let me know if you need anymore information.  Thanks
    Chris
    OS: Windows 7 Home Premium 64-bit
    Make: HP Desk-jet e-All-in-one Printer
    Model: J611a series 3050A  
    Product serial No: {Removed for privacy}
    FPU No: CR231-64001

    Hi,
    What exactly is going wrong? and with the link below you can find the specs of the printer. Under paper handling the sizes and paper weight that are supported are listed.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Newly Installed HP desk jet 2510 all in one printer will not print web pages

    Hello;
    I have just now installed my new 2510 desk jet printer and installed all software.
    It prints saved docs fins, but when I try and print web docs from the "print view " screen, it does not print. I have tried this a few times now.
    Any suggestions?
    Bill L

    Hello  landsabil ,
    Please check if the printer HP deskjet 2510 is selected when you click on FILE > Print  on a webpage .
    If it does not work, then try to print using a different Browser.
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Desk jet DJ4515 setup via mobile

    I have purchased a desk jet dj4515 and wanted to know if I can install and set the printer up using a mobile phone as I do not have a laptop or computer.

    Dear Lewington,
    Here you have some documents where explains how to print from a mobile:
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • DESK JET 6940

    i have a desk jet 6940 that will not comunicate with my desk top computer.I have a DELL with
    windows professional. Its hooked up to a router.

    Hello jghiggs, welcome back to the forums
    I read your post about how your Deskjet 6940 is not communicating with your Windows PC, that is connected to a router.
    I will gladly do my best to help you however, I will need some more information from you to clarify the problem.
    Please let me know the answers to the following questions and if you have not yet tried the steps, please give them a shot and let me know the results!
    Can you print a test page from the printer itself (without using the PC)?
    Do this by pressing the cancel button (X) on the printer until the test pages starts printing, and then release the button.
    Run the HP Print and Scan Doctor which may correct the printing issue, if not it will alert you to where the issue is, let me know the detailed results.
    Have you tried printing from different programs?
    Which version of Windows are you running? (XP, 7, 8, 8.1)
    How is the printer connected to the computer? (Wireless/Ethernet/USB)?
    Have you tried an alternate connection?
    What Firewalls and Anti-virus software are installed? Have you tried disabling or uninstalling them?
    Please let me know the above information and results and we will proceed from there!
    Thank you and enjoy your Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Help.. Superdrives open and will shut then reopen

    I have a Mac Pro 2.8 8-Core, and I just added a second drive to the machine. It boots fine and the trays are shut. When I push the eject button on the keyboard both trays open, then I push the eject button again and they both go in, hang for a second

  • I face a problem  while making a confirmation on portal.

    Hello , Can anyone help me I am facing a problem while making confirmation in the portal. the system pops up an error as mentioned below. Please help •     Folgender Fehlertext wurde im System SRP prozessiert: Speicherungsform der Produkt-ID ist im C

  • Ipod does not appear in itunes after windows scan and fix

    Two days ago, I restored my Ipod classic using Itunes 9.2.0.61. After restoration my Ipod started freezing Itunes and Vista. At a point, I saw a blue screen and my computer forced a shutdown. When it rebooted, Vista kept asking to automatically "scan

  • HTTP receiver Adapter configuration

    Hi All, I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service) The receiver has Oracle gateway and it expects message in following format. HTTP Header    Http–Version: HTTP/1.1    Authorization: Digest us

  • Satellite C55-A-1RG (PSCJGE) does not boot anything?

    I've just bought this model today and it came win no OS installed and now I'm trying to install something on it so I can use it. The issue is that it doesn't want to boot anything. I've tried Win7, Windows8 from DVD and USB and also downloaded Ubuntu