DeskI report from Infoview - doc.zabo_fc

Post Author: nagh
CA Forum: Administration
In BO XIR2, I tried to edit / create a DeskI report from Infoview on a PC, where no DeskI is installed. Then it prompted me to download a file doc.zabo_fc. I downloaded the file; but even then I could not create / edit a report. So is it correct that, even if we invoke Deski through Infoview (to create/edit a report), we should have a local installation of the DeskI ??  Please clarify.

Hi nagh,
Thats right. You need to have DeskI Client locally installed on your machine for the create/edit option from Infoview for deski reports. This is the difference from the earlier 6.5.
Hope this helps,
Rahul

Similar Messages

  • A deski document from Infoview opens with XIR2 instead og 6.5.1

    Hi all,
    I have in an installation BO 6.5.1 and XI R2, when trying to edit a deski document from Infoview (6.5 version), somehow it is being opened with
    the XIR2 version of Deski and it gives an error. How can I change it so it is opened with BusinessObjects 6.5?
    The .rep are associated with the older version, I don't know if I have to take into account anything else.
    Thanks

    Juan,
    It is because of Windows file association. Since XI was installed last, Windows associates .rep files to be opened with XI Reporter. Below is a topic that might help:
    http://www.forumtopics.com/busobj/viewtopic.php?t=67785
    Kashif

  • Large DeskI report in Infoview

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitesh,
    Following information might help you to resolve the issue.
    Issue might be related to timeouts on the connection server.
                                                                                    Please login into CMC and go Home>servers , locate Input and Output File servers and modify timeout of each to be 60 minutes. Default is 10 mins                                                                               
    This 10min default value can be modified in the registry as well:                                                                  
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suit 11.5\File Server\Instances\input.<machine name>                                  
    There is a registry key called u201CServerMaxIdleTimeu201D. Modify it and change the decimal value to 90 (default is 10, max is 90).                                                                               
    After this change is made, please restart CMS and FRS servers and test same again. Please let me know the results.                                                                               
    Regards,                                                                               
    Sarbhjeet Kaur

  • (Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitestwar,
    Try these notes as well
    1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
    1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
    1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
    You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
    Or try to set logs on the server and check what is happening.
    Thanks,
    Vivek

  • Unable to Export report from InfoView

    Hello, I have a remote user who is trying to export a report from InfoView to an Excel file and when she does she gets the following error..
    Your request was refused because you do not have the right 'Right To Download' on report 'frs://Input/a_005/014/000/3589/83453a9daf64d2.rpt'. Please ask your system administrator to grant you this right.
    I suspect it may be a problem with the activex plugin but i'm not sure.  Does anyone know where I can find the plugin so I can ask her to reinstall or does anyone know how to fix this problem?

    Hi Rod,
    You might want to check the users rights in the CMC first.
    There are a couple of rights which might be denied to the user
    'Download files associated with the report'
    'Export the report's data'
    To check these you will need to look at the user security for the folder in which the report is located. The rights are assigned under content, Crystal Reports.
    Regards
    Alan

  • How to kill/stop a report from InfoView/CMC ?

    Hi All,
    I have CRS2008 v1 environment running reports against Sybase database. Users run reports from Infoview. I would like to know what the best way to kill or stop a report that has been triggered from Infoview? Kill the spid from sybase or is there a way to kill it from Crystal?
    Thanks
    Ajith

    I want to kill reports run by users if they affect the system performance due to large volume. In that case the stored procedure that the report uses to select data might run for longer periods and I want to able to kill that process. So the question is which is better ?
    1. Kill the spid for that report stored procedure in Sybase
    2. Stop/delete the report instance from crystal if it is possible.

  • Error while scheduling DESKI report in infoview

    I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
    When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
    bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
    I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

    Abhilash
    You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
    But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
    Hope I am able to explain my query to you.
    Also attached a screen shot of the scenario for your reference.

  • Unable to run Store Procedure based deski report in Infoview

    Hi All,
    I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
    More details about report
    - Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly".  -- SP2 is Dataprovider name.
    - Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
    - I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
    Any input will be great help.
    Thanks,
    NV

    Hi,
    Could you please test the following solutions to resolve the issue.
    Solution1:
    Test the issue by inserting the following parameter in .SBO file.
    <Parameter Name="Force SQLExecute">Always</Parameter> .
    Solution2
    Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
    If the above doesnu2019t works then please try the following solution.
    Solution3
    Make the new connection from the scratch using ODBC connection and test the issue.
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • Scheduling Crystal report from Infoview portal doesn't show up data

    "The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
    Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
    Thanks in advance,
    Sri

    Once you tick the schedule button the History window opens and you should see your instance. Status is usually pending and after a refersh (scheduled for run now) you should get the status running/successfull or failed. What is your status here and what happend if you tick on the instance once you get the status successfull?

  • Scheduling the report from Infoview portal does not show up data

    "The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
    Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
    Thanks in advance,
    Sri

    Hi Sri,
    When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
    Just try to login with admin account and try to schedule the report.
    Also check the report in CMC and see the preview of the report.
    If the user doesn't have enough rights to schedule the report, then  it doesn't allow it.
    Also check with in the Folder rights with in the report is saved.
    Regards,
    Naveen.

  • Red Blue issue with published DeskI Report in InfoView

    Hi everyone,
    i'm expieriencing a strange behaviour with my published DeskI Reports.
    I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
    My System consists of:
    BOE R 3.1 SP2
    Win Server 2008
    DeskI and WebI
    Has anyone expirienced the same issues?
    Thanks and kr,
    Nils

    Hi Stratos,
    so far everything is just fine. Hope you are doing great too.
    my IE version is: 7.0.5730.13
    Tomcat version: 5.5.20
    If I click on the logos in InfoView, nothing happens.
    I tested 3 different ways to implement them:
    1) via link; pictures shows up, but again with the red blue issue
    2) as an object; pictures shows up; also w/ the red blue issue
    3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
    The strange thing is, that this issue only appears in the browser.
    Thanks,
    Nils

  • Database error when trying to view Crystal Report from InfoView

    I am receiving the following error when I try to view or run a Crystal Report from the InfoView.  The report is based on an SAP InfoSet.
    "Failed to load database information."
    The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView.  The same error appears when trying to import into Excel using LiveOffice.
    Server details:
    -Edge 3.1
    -Windows 2003 64-bit
    -SAP Integration kit installed
    Local Crystal Reports machine details:
    -Windows XP
    -SAP Integration kit installed
    -Crystal Reports 2008
    My steps to troubleshoot so far:
    -Checked Database Logon details in CMC for the report.  Username and password are entered correctly.
    -Cycled all CrystalReports background services off and on again from the CMC
    -Rebooted server
    Have I missed anything?  Any help would be appreciated.

    Hi,
    do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
    Regards
    -Seb.

  • Unablo to open Crystal report from infoview

    Hello Experts,
    I have an issue while opening crystal report from BOBJ Infoview.
    The report opens for some users and some users are getting this error.
    " Internal error. Please contact your system administrator. [RCIRAS0216]  ", the report is based on bw query and the users has access to this query,the users are able to execute other report based on same query.
    Even some users who are administrator group members are getting this error.
    Any help is appreciated.
    Thanks
    Kish

    It happens to only one report,but when i changed the option to "Use same database logon when report is run" in CMC, it resolved the issue.
    But i was wondering why the report encountered this error for the same user for whom it was working good in the past.
    Thanks,
    Sai

  • Err:INF - access to the deski reports by InfoView

    Hi,
    If user do not have rights to the deski application,
    when trying to view the report deski by InfoView - receives an error ERR:INF.
    When you get right to the application deski this is ok.
    I can not find a solution to the problem.
    regards
    Krys
    PS.
    BOXI R2 SP4, Win2003, Apache/Tomcat
    Edited by: Krzysztof Nowicki on Nov 3, 2009 10:31 AM

    We had a similar problem when opening a deskI report with the pdf-viewer. It was solved by the following:
    DesktopIntelligenceProcessingServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true
    DesktopIntelligenceCacheServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true

  • Direct Print a webi report, from InfoView

    Hi,
    I want to direct print a webi report after I open it with InfoView, but i don't know if it's possible.
    Right now, when I open a webi report in InfoView I have a button saying "Print to PDF", which will open that report as a PDF document.
    But I want to print directly to a printer and not to open the report in a pdf viewer.
    Is there a way to have a direct print button in InfoView for webi documents ?
    Thank you.
    Eugen
    Edited by: eudor2000 on Jun 3, 2010 7:49 PM
    Edited by: eudor2000 on Jun 3, 2010 7:49 PM

    Hi Eugen,
    At this point it is not possible.
    Here is SAP Notes which clearly state that SAP BOJ is aware of it and got several enhancement request and these requests are reviewed every six months. Since these requests require major changes in the software, SAP BOBJ has not given any time frame of availability of this feature.
    Here is SAP NOTE: 1345933
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133343539333326]
    Regards,
    Bashir Awan

Maybe you are looking for

  • Since loading IOS7 my iPad behaves erratically

    Since loading ios7 my iPad behaves erratically with keyboard keys malfunctioning and screen size not containing viewable area. Please help.

  • HT204053 If I have already set up an iphone with an icloud, can i switch to a different icloud?

    My question is, if you are already set up on a specific Apple ID, with a Specific icloud, and it's shared, can you change the apple ID and Icloud? How do i do this? I have tried everything I know to do?

  • Transferring filesd-Macbook to Macbook Pro

    I just got a new Macbook Pro and am in the process of trying to transfer my documents and photos from my old Macbook. I was able to add the files to my new computer, however I am only able to access them when my old macbook is open and connected to w

  • QI INFO RECORD SHOULD UPDATE

    Sir, i created an QI INFO record for one material for not to make any inspection plan and i created a PO for 5000 qty with reg to same PO  i received 100 qty only remaining qty is pending. My question is that for reaming qty i want to create inspecti

  • I need a turn on switch for a Microph

    After taking my Microphoto apart my wife found it necessary to relocate my workspace and in the process, lost the turn on switch. It's really the only stupid little piece to loose and its gone. If anyone has gutted theirs, has extra parts, has a dead