Deskjet 1050 All-in-One J410e can not print in draft mode.

I wanted to print in Draft mode (300x300 dpi). I went to Avanced Options to adjust the resolution, but the drop down menu says "The following is for informational purposes only. Clicking on anything in this list will not change your Print Quality setting."
I was also unable to select Draft mode in the Preferences>Paper/Quality tab. Normal is automatically selected and the other options (Best, Draft, Custom) are grayed out.
What can I do to print in Draft mode (300x300 dpi)?

1st_HP_printer,
I believe the answer is best worded on Pg9 of the manual: http://h10032.www1.hp.com/ctg/Manual/c02227094.pdf
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Deskjet 3520 All-in-One: Black Ink NOT printing....

I am highly irritated right now. My printer is 3 weeks out of warranty. I just spent $60+ in new ink cartridges today. The color cartridges are working fine, but the black ink does not work. The printer acts like it's printing, but nothing shows up on the paper. I see multiple people with this problem on this forum and other forums. I called tech support....went through an hour of "troubleshooting", then got disconnected. Called back and waited 45 minutes for another representative to tell me that he would sell me another printer for $100+ including some start-up ink cartridges that won't last me very long. I JUST bought $60 in ink cartridges TODAY. I have tried to take the printhead off with no luck. I can't get the printer apart in order to take the printhead off. I was going to attempt to clean it myself, but it's impossible to take the thing apart.
I am EXTREMELY dissatisfied with hp's customer service and feel that they should back up their product when it stops working only 3 weeks after the warranty expires. I would love if someone could tell me how I can fix this problem, since the printer is in basically new condition and has brand new ink.
It's unfortunate that these products aren't made to last longer than a year. I will not buy another hp product.
This question was solved.
View Solution.

Hi MarenB,
Please click on the link that I have provided for the ink related issue's. If this link is not successful, please let me know and we will attempt some other steps to get the issue resolved. http://goo.gl/Gf8orO
Thank you
Greenmarlock, Please use the following link for your Laserjet printer. http://goo.gl/eAVW02
If this link does not resolve your issue, please let me know and I will be more than happy to attempt to find a resolution for you as well.
Thank you both so much
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP DeskJet 1050 ALL-IN-ONE J410 series Printer Scanner stopped working suddenly

About a month back Scanner in my printer-scanner (DeskJet 1050 All-In-One J410 series) stopped working with a message on screen " HP Deskjet 1050 J410 series was not found". But the Printer was working fine. I have so far taken following steps with results against each -
a) HP Print & Scan doctor (HPPSdr.exe) showed HP Twain Scan faulty.
b) On advice from HP helpline, tried HP Deskjet Full Feature Software & Drivers (DJ1050_J410_1313.exe). It required uninstalling before installing. But uninstalling failed to happen.
c) Finally, with HP Printer Install Wizard (hppiw.exe) help it showed that Full Feature HP Software & Drivers is now installed. For its functionality, it called for its testing on 'print test page' and 'test scan'. After this, printer shows printing jobs in queue but will not print. At present it is limited to photocopying only without printing & scanning.
d) I am caught in a loop, because at the end of hppiw.exe message is '...if tests are not successful, HP recommends using HPPSdr.exe to diagnose and fix any problem' i.e. back to point (a) above.
Any solution to the above problem?

Hi there @sukuma ,
I can see that you have a thread open with @Futoji in regards to the issue however, no response. I would suggest completing his troubleshooting recommendations and reply back to continue the troubleshooting efforts. I hope that helps you!
Here is the link to your other thread: Troubleshooting Thread
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I connect my HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection

I have a
HP Deskjet 1050 All-in-One Printer - J410a
I am connected to a computer but would also like to connect it to my laptop wirelessly.
Can't do it. Must be doing something wrong. Need help thanks.

Hi @5468,
Welcome to the HP Forums!
I noticed that you are wondering how to connect your HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection. I am happy to look into this for you!
According to your printer's specifications and the Setup Poster, this printer can only be connected to a computer via a USB 2.0 printer cable connection. This printer does not have wireless capabilities.
Hope this answers your question, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Deskjet F4435 All in One Scanner undetected, not working

I have Mac O S X 10.6.8, and the deskjet F4435 all in one. My printer is working fine. I am having issues with the scanner. I open the scanner and it gives an error message, "Failed to open session on the device." I already uninstalled all the hp software and reinstalled it. The scanner used to work by using photosmart, scan, except now it searches for device and doesn't detect it. Please help me fix this problem.

Hello @computerilltrit , welcome to the forums!
I saw your message, and I am hoping I have a fix for the issue you are having with scanning on 10.6. Below are the steps I would recommend that you try, and also do them in order they are written.
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Download and install the Full Feature Driver here which contains scan software: HP Deskjet Full Feature Software and Drivers - Mac OS X v10.4, v10.5, and v10.6
Try scanning from the HP software and you should be able to scan, fingers crossed!
Let me know what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet 1050 All-in-One Printer series - J410A not printing photos

Hi,
It's been months since I tried to fix the photo printing of my printer and until now it's still not fixed.
My problem is that I can't print photos via windows photo viewer. When I hit print, it shows a printer icon on my task bar and it disappears. I am using Windows 7.
Also, if I check on Device Settings tab of my printer properties, the photo tray is missing. See screenshot:
I tried printing using Paint and IE9 and it printed but my problem is that the photos are too dark.
So I have two problems here:
1) I cannnot print via windows photo gallery and my photo tray is missing.
2) Printing to other applications like Paint and IE9 produces very dark photos.
This happened after I updated my driver. I tried switching back to my old driver and it printed but the photos are too dark already. When the printer was still new using the old driver, I had no problems with my photos and they look all good. I updated my driver because the time came when I cannot see my ink levels with my old driver. I have also tried uninstalling and reinstalling the drivers and the problems still persist.
Please help!! I have wasted a lot of photo paper and ink by trial and error. T^T

If you are having problems with printing photos, see if this document is of any assistance in finding the right settings:
--Print Photos Saved On Your Computer--
I would like to add that I have never seen a photo tray option in the Device Settings of the Printer's Properties. I checked all of mine and some had the duplex option here but no mention of a photo tray even if the printer had one. But while you're in that section, you may want to change it from "Letter" to the photo size you are trying to print (4x6, 3x5 etc).
One problem I had with your question regarding the photo tray, I didn't know this printer had a photo tray. I will post a picture below of this printer and when you reply, let me know where exactly this photo tray is in case I am just not seeing it.
When printing from IE9 or Paint, the images come out dark but what about an image in a Word document? Does that come out too dark as well? Can you make a copy of a normal photo and it come out dark too?
Answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP DESKJET 1050 ALL IN ONE J410 SERIES.Bought in Mauritius

Deskjet 1050 not compatible with HP301 but uses HP61

Using HP301 or HP61 will depend on your region. Which country are you based in?
Finding and installing cartridges after moving to another country
http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Finding-and-installing-cartridges-...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Deskjet All in ONe L7650 will not print black only --

Started doing this with previously working black cartridge, updated software--prints, but blank page comes out when set to black ink only; prints other colors.
Changed black print cartridge and still will not print black. Diagnostic page prints other colors.
Printhead health shows good for all colors.

What brand of printer cartridges (not printhead) did you use the last time you changed them? I don't know if it was because one or both of my printer cartrdiges went dry, but I put new cartridges in (not printhead) and it improved somewhat--I kept trying to clean the printheads but it seemed to never get resolved.
I refuse to have to buy new printheads. I tried several cycles of "align printheads" "clean printheads" and never got a decent print out, but I did get to the point of all the colors printing although magenta printhead makes printing errors and so I never know what I am going to get with color anymore.
It seems to be at its worst when printing in "draft" but in normal or best (with more ink coming through) it seems better--the higher ink volume seems to cover some of the problems with the printheads.
So, I am justing using it "as is" and not replacing the printheads--because it is a waste and yes, could almost get a new printer for this cost.
I wish I had never gotten this All in One and just stuck with the old 970 csi and the old UMAX scanner, which was a better scanner, but thought I would "save some space" by getting this since it scans legal, which I needed.
Just keep trying to reseat the printheads (also trying to reclean them, which seems to make it worse) and keep printing out those "tools" alignment and cleaning procedures.
But no help from HP.

HP 7510 All-in-one - alignment failed - not printing centered on page

HP 7510 All-in-one. I am getting alignment failed message at initial set-up. all colors print but text is not centered on the page.
Help!

Hi jillybeads99;
Hope you are having a great day and sorry to hear that you are having this issue;
Are you still experiencing this issue?
If you are, Try this uitility click here
I will do my best to assist you.
If you are not experiencing this issue any longer you may disregard this post, although I will deeply appreciate if you can take I little bit of your time and let me know.
Hope it helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I have a iphone 5c and a wireless computer hooked to a usb wireless printer Hp4215 officejet all-in-one how can I print from my phone to the printer

How can I print to my wireless Hp officejet 4215 all-in-one printer that is usb in line with my computer that uses windows 7 from my Iphone 5c

there are 2 ½ ways to print
1. the printer support AirPrint and it works out of the box
2. one get a printing app from app store which support the printer
2-½ one get the free software from netgear called netgear genie which will make the computer display all printes it's know act as AirPrint printers
no other things in the known universe will make printing possible

Why do I get a dent in the paper in the photo tray. I have 6280 all-in-one photosmart? not print

I have a 6280 all-in-one printer and it will not pick up the photo papar from the photo tray. It has a message that says load paper glossy side down. I have paper in there. when I examine the photo paper it has a dent in the end that is inserted first. Please help and thank you.

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Premiun All-In-One 6700: Can't print Adobe CS3 in Mac OS Mavericks

I have an HP 6700 Premium All-In-One printer. I have OS Mavericks on my Mac.
Now I can't print from any of my applications in Adboe CS3. Apple says my printer manufacturer has a driver to download to fix this.
Where is it???
Thx

I can print pdf's - but without any duplex option - on Mac OS Mavericks, whereas duplex works from my old wXp desktop!

After installing McAfee encryption on my XP laptop, my OfficeJet All-in-One 7410 will not print.

I have unstalled the software and now I can not reinstall the software. The diagnostic tool can see the printer, but the install software can not, even when I enter the IP address. I've turned off the firewall. I've connected the printer directly to the router. The only way to use the printer is through the USB which is not acceptable.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Deskjet 1050 All-in-One J410e can not print in draft mode.

Similar Messages

Maybe you are looking for