Deskjet 1050 printer not printing black

I replaced ink cartridges with new HP cartridges. Printer will not print black. Uses printer scan doctor. Both cartridges show full. Printer will print color but not black. Done a clean and alignment.Test print using power and X buttons. No black on test print.Replaced cartridges with tow new cartridges, same result NO black.Have used Windows 10 64 bit OSand Windows XP 32 bit OS same resultRemoves cartridges and used ear bud swabs with alcohol and cleaned the cartridges - NO change, NO black

Hello @lalasmiles30,
Welcome to the HP Support Forums!
I understand that you're experiencing a black print quality issue when printing from your Windows 7 computer to your HP Deskjet D4360 Printer and a carriage jam error on your HP Officejet 4622 e-All-in-One Printer. I would like to work with you today with resolving the issues with these two HP printers. To make this post easier to follow I am going to divide my response into two separate sections for each printer. Can I please have you follow the steps below to resolve these issues.
Deskjet D4360 Printer Print Quality Troubleshooting:
To resolve this black print quality issue, can I please have you click here. Once the support document opens please run through Step three, Step four, Step five, and Step six. This includes any sub-steps under the listed Steps to follow.
Once troubleshooting is complete please test printing another Diagnostics Report from your printer to verify if the black printing issue has been resolved.
HP Officejet 4622 e-All-in-One Printer Carraige Troubleshooting:
In your post you indicate that you have already tried troubleshooting this issue to no avail. At this point I would like you to click here to access the carriage jam troubleshooting steps. Once the support document opens please follow Solution one, Solution two, Solution three, Solution four, Solution five, and Solution six. This includes any sub-steps under the listed Solutions.
If you have already completed the steps in this support document, please just review them to ensure that nothing has been missed.
Should the carriage jam issue persists, a whole unit replacement may be needed to correct the faulty carriage assembly issue.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

6510 all in one photosmart printer - not printing black and/or not at all after 7/22/15 update....

Printer not printing in black at all, poor color print since 7/22/15. I have downloaded drivers and software, hard reset the printer (power cord out and unplugged then plugged all back in), read all the forums, watched youtube videos, called friends, googled answers, bought new ink (waste of money), cleaned print head multiple times, did every step on every forum post to no avail... Bought a new printer but really would rather return it and get my money back after getting this printer up and running again- why because I think the problem is due to HP and the new update released 7/22/15! I'm very upset, I have spent countless hours attempting to fix this printer (which I really do love up until now). I have lost credit on school assignments due to printing issues, wasted money on ink (that is really expensive) and wasted the ink trying to fix it running test page after test page. I feel like this is not fair to the consumer and I am very upset. I am ready to throw this thing in the street and smash it to pieces with a baseball bat at this point. I really would rather fix it but apparently this is the only way to contact someone. I have had this printer for 3 years and do not think I need to replace it or spend money to call someone from HP to fix it nor do I feel like I need to have it "serviced", nor do I wish to waste any futher time or money on the expensive ink this printer requires.

Hi there ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,

Printer not priting black....just put in new cartridge. As if not getting Command.

printer not priting black....just put in new cartridge. As if not getting Command

I would like to assist. What printer do you have?

Printer not printing AND Matching Screen colors to Print colors. Any advice is apreciated!!

Hello - I have 2 questions regarding printing to an Epson and also regarding the monitor colors Not matching the print colors working from Photoshop CS4 on a Mac with a Maverick [ 10.9.3 ] OS. My issues are Not about my own printers or software. I have been tutoring a friend via phone in Photoshop; he has CS4 and is working on Mac OS 10.9.3.
1- We found that he could print nearly fine [ nearly accurate colors ] from Lightroom on his computer, version 5.4. But when he tries to print from Photoshop he cannot make a print. There is clear communication between the computer and the printer, as, when he sent the file to print, the printer [ an Epson 3880 ] responded by automatically changing to Photo Black from Matte. Then, it opens the rollers as if to print, but, it them stops and the menu [ on the Printer ] says 'Ready.' The paper is 4x6” Moab Lasal paper 300gsm. This issue of Not printing is only with this Moab Lasal luster paper, for which he Does have the IIC profile, and we always make sure ‘Photoshop manages colors,’ not the printer. To address the issue of the printer Not printing at all using a non-Epson brand paper, we have tried seemingly everything from deleting and re-adding the printer from the Library / Printers, resetting everything [ printer computer software etc ], trying different settings in the Printer window and the Print Settings window. Including changing the media profile, platen gap, etc.
2- My other and more important question is – after we Do get a print, we cannot match the monitor color to the print. [ We havE been able to get a print using Epson brand paper. Which is odd because we have the ICC profiles for both papers ]. To address the color matching issue, he has told me he calibrated the monitor with a Spyder, and here are a few other variables that I can relay that may or may not be affecting his color-issues:
He iS viewing his prints in a dayliglht-rated lighting environment
The monitor is an iMac glossy finish monitor, not an anti-glare
We tried working and printing from both an 8-bit and also a 16-bit color-space and also 16-bit printing
The color shift is slightly but noticeably toward Magenta.
His printer is Not calibrated
Please let me know what else we can do, any known glitches that may be an issue with his older version of CS, any tips you can suggest.
Thanks very much!

I don't have that printer and I'm not on Mac, so someone else has to step in there. Generally a green/magenta cast indicates none/double printer color management. But then I don't know what you mean by "slight".
The Spyders aren't the most consistent and reliable calibrators out there. I had a Spyder 3 sensor that I just threw away because it gave a distinct red cast (I have several other calibrators, so there was no doubt). Another potential problem is that with most calibrators you can only adjust the white point along the blue/yellow Kelvin scale, but not on the green/magenta scale. This is often necessary to get a good white point color. In this case you need to use the monitor's OSD controls, and if possible the "pre-calibration" function in the calibrator to measure and monitor it - if that function exists. And I don't know if this is possible with an iMac.
This is basically a question of getting the white point right, both on the blue/yellow and the green/magenta axis (and luminance of course). The goal is to get a visual match to paper white on screen. With the white point properly set, neutral color balance relates to that, and the rest more or less follows by itself. (In addition you should set the proper black point/contrast for full control, but that's not the issue here).

My HP Deskjet 3520 will not print in black after replacing cartridge

I have just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless). It prints in color fine, but not in black. I've tried cleaning the print head, aligning the cartridges, checking the breather on the cartridges. I've also just opened up another black cartridge, thinking maybe my new one was defective. So now I've just wasted a cartridge.
so frustrated! My printer is more than a year old now to. So no warranty. when I click on the printer ink levels, it's recognizing I have full cartridges - but it's not printing in black at all.
This question was solved.
View Solution.

If the troubleshooting steps in the post here do not resolve the issue the I suggest you contact HP as described in that post, even if the printer is out of warranty.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My hp deskjet 9362c will not print in black and white/error message says the printer mode is set at

can not get my hp deskjet 932c to print in black and white. error message states print mode in auto, but I can't find the print mode to correct. printer was printing in black and white or color automatically til last night, then in middle of document quit altogether. new cartridges get the same results.

Check the paper type settings. If this is set to "automatic" and the paper type is detected as photo paper then black only print is not available. (The black pigmented ink is not compatible with photo paper.) What is your operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer not printing black ink Hp Deskjet D4360 / Carriage jammed not moving on Hp Officejet 4622

my cartridge is full and i did the blot test ink showed up but still not printing this is my HP Deskjet D4360
and my HP Offciejet 4622 keeps saying carrage is jammed and not moving and i tryed everything
Help me please
lalasmiles30 3

Hello @lalasmiles30,
Welcome to the HP Support Forums!
I understand that you're experiencing a black print quality issue when printing from your Windows 7 computer to your HP Deskjet D4360 Printer and a carriage jam error on your HP Officejet 4622 e-All-in-One Printer. I would like to work with you today with resolving the issues with these two HP printers. To make this post easier to follow I am going to divide my response into two separate sections for each printer. Can I please have you follow the steps below to resolve these issues.
Deskjet D4360 Printer Print Quality Troubleshooting:
To resolve this black print quality issue, can I please have you click here. Once the support document opens please run through Step three, Step four, Step five, and Step six. This includes any sub-steps under the listed Steps to follow.
Once troubleshooting is complete please test printing another Diagnostics Report from your printer to verify if the black printing issue has been resolved.
HP Officejet 4622 e-All-in-One Printer Carraige Troubleshooting:
In your post you indicate that you have already tried troubleshooting this issue to no avail. At this point I would like you to click here to access the carriage jam troubleshooting steps. Once the support document opens please follow Solution one, Solution two, Solution three, Solution four, Solution five, and Solution six. This includes any sub-steps under the listed Solutions.
If you have already completed the steps in this support document, please just review them to ensure that nothing has been missed.
Should the carriage jam issue persists, a whole unit replacement may be needed to correct the faulty carriage assembly issue.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Deskjet 3520 e-all in one printer not printing black ink

I just installed a new hp 564xl black ink cartridge with an expiration date of 01/30/2017. Low and behold the black is not printing and the printer was purchased in 08/2012. I did everything that was suggested in the support forums and to no avail did anything work. The three other colors print out fine except the black. Based upon everyone's answers I guess there is no repair for it and I should scrap this unit after three years of constant use. I would think by now there would of been a solution posted to this problem but Hp has failed us. I've been using HP printer products since I purchased my first computer in 1992 and never had a problem with them until now. My second printer which was purchased in 2004 is still going strong, except that it is not wireless. If I need to purchase a new wireless printer, I'm sorry to say that I might have to look at the competition. If anyone knows of a solution I would appreciate it.

The post here has links to a troubleshooting document for the Deskjet 3520. If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty. If the above does not give satisfactory results then please post back here and mention the country you are in.

My hp deskjet 842c will not print in color only in black

Until the other day, my printer was working quite well -- printing in colour or black. It seems that I ran out of ink in my colour cartridge and upon replacement, the printer would no longer print in colour. I replaced the colour cartridge again thinking that maybe the replacement cartridge was defective but the problem still persists -- the printer simply will not print any colour. I am running Windows 7 Home Premium version 64 bit.

You can check the ink levels here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693389&tmp_task=useCategory&cc=us&dlc=en&lang...
The driver for this printer, when used within Windows 7, is built-in or 'in-OS' so you do not have access to the HP solution center or HP Toolbox.
Printing the self-test report will show how the ink is dispensed and what levels of ink are available. If on this report there is nothing shown, the issue is likely related directly to the cartridges rather than a software issue.
If this is the case, visit this article and browser towards the bottom:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bud02948&tmp_task=useCategory&cc=us&dlc=en&lang=...
There are steps on how to clean the cartridges as well as the underside of the carriage in case there is and debris or interferrance causing this issue.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Obtaining IP Address of HP Deskjet 1050 J410 series printer

Hello! I recently downloaded a printer plug-in on my Android phone( Sony Xperia Z) and my phone asks me for my printer's IP adress. From where to acquire it? My printer's model is HP Deskjet 1050 J410 series

Hello @megsborat,
Welcome to the HP Support Forums. I understand that you would like to learn how to find the IP address for your Deskjet 1050 printer.
The Deskjet 1050 printer only supports a USB cable connection so it will not have an IP address. I have included the Printer Specifications for the HP Deskjet 1050 for reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Deskjet 1510 will not print

Hi Everyone,
I am not really tech savy so please be patient.
BEFORE I CONTINUE PLEASE NOTE I HAVE READ OTHER MESSAGES REGARDING THIS TOPIC HOWEVER I AM STILL AT A LOSS.
I have purchased a hp deskjet 1510 printer. I am having trouble printing from a word document or pdf file or a photo etc. I can photocopy however not print.
I have uninstalled the program and reinstalled. I have made sure that the printer is selected as the default printer etc.
If anyone could help, it would be greatly appreciated.
Thanking you in advance.

I am having real problems as well. It will not let me set the 1510 as default printer, telling me its not part of hte network.
I have spend 3 hours looking through this site to find answers and not one person on this site has managed to get a satisfactory answer and an explanation what is wrong. All you keep getting told is uninstall it and it will be fine.
I've uninstalled, re-installed, installed, everything and nothing is working.
Can someone PLEASE sort out what is wrong and provide a proper solution which doesn't involved uninstalling and reinstalling software which should work when we buy the bloody machine.
If I don't get a fix its going back to the shop and I'll buy a canon or an epsom, because the 1510 as it sits is a complete waste of money if you cannot even get the sodding thing to work when you buy it.

Hp deskjet 1510 does not print when choosing specific font style

Hi Guys,
I just bought hp deskjet 1510 and installed the driveres via the CR came with.
- I use Windows 7
- Have Microsoft Office 2010
My issue is as the following:
When typing a document and chose font type "Adobe Arabic" then click on print, the printer power light will only blink and no paper is printed! When changing the font to other type then the printer will print out the paper.
Is it something can be fixed? it is not critical choosing this spcific font type for me but would be lovely if someone know how to fix this.
Thanks,
Raed

Hi Raed_B,
Thank you for answering my question, and trying the HP Print and Scan Doctor. Sorry it did not work for you, I do have some more suggestions to try:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Make sure the firewall is disabled. Turn Windows Firewall on or off.
Make sure antivirus is disabled. Disable antivirus software.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this will help resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Deskjet 1510 AIO Not Printing

i recently brought HP Deskjet 1510 AIO and tried to install on my windows. While i never faced any issue with any HP printer, this one is making me mad.
It does scan, copy, alignment test and all but does not print through any program. I tried various solutions but no luck.
I have installed Windows 8.1 on my Mac Air through bootcamp but it should not have any concerns because of it as other printer used to work. It is also working fine in my Apple OS but not in Windows.

This worked for me.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/hp-deskjet-1510-series-won-t-print/m-p/...

Printer not printing black Ink

My printer is not printing black colored ink. The cartridge is brand new and when I touch the ink pad on it, it saturates black so I know that it's not an issue with the cartridge. I have the HP Photosmart 5510

Hi @PaigeWest
I see you are unable to print black from your Photosmart 5510, I'd like to help. Please complete all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
IMPORTANT: Please also include your country/region in your next post. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Deskjet 1050 printer not printing black

Similar Messages

Maybe you are looking for