Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

Similar Messages

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

"The HP Deskjet 3050 J610 series was not found." Can't scan with wireless printer to desktop. Help

Our new wireless printer will not scan. I have tried to scan from the computer and get the below error message and then I have activated the scan from printer and when I push the scan button on the printer, I get the same error message.
Thanks!
Product Name: HP Deskjet 3050 J610 Printer/Scanner/Copier
Operating System: Windows 7
Error Message: The HP Deskjet 3050 J610 series was not found - when trying to scan.
No changes made to system

I had some problem. I found you must use HP 'Update IP address' program to add printer instead use window add printer. All programs -> HP ->HP Deskjet 3050 610 series -> Update IP address.

Deskjet 3050 J610 will not install on Mavericks or new Router

I have had a deskjet 3050 J610 for a couple years and it has worked fine with our MacBook Pro (with the exception of updates) . We recently restored our MacBook and added Mavericks. We also have a new netgear modem/router. We can not connect the printer to our network or to the laptop wirelessly. Here is what has happened so far after spending hours attempting everything we could find online with no sucess......
-I can print from the Mac with a USB cable connected to printer
-I've restored the printers default settings
-Printed the HP Network Configuration Page and it shows our Network
It says my HP printer cannot find the access point.
Everything passed except network name found....this failed
Network status-Offline
embedded web server-http://0.0.0.0 I can't even get to the webpage
network name (SSID)-HPJ610a.0798A0
ip address-not applicable
The blue light for wireless flashes on printer.
When I go to Wireless Menu it says wireless radio is on.
My next option is Settings, Under Settings I have Disable, WPS and Defaults.
Under WPS I get Push Button or PIN......neither worked.
Printer DOES NOT have a wireless setup wizard!
I have checked for updates on the Mac and do not have any (Original CD not compatible with Mavericks). When I go to System Preferences-Print/Scan, it shows the printer as disabled. I tryed downloading software & drivers from HP's website, but when I go to my Applications menu, there is not an HP folder/icon.
PLEASE HELP!!

Hi,
Currently a full feature software is not available for your products for Mavericks, however there are some other workarounds to connect the printer to your network.
Please follow these steps to create a temporary ad-hoc connection and then set the wireless connection through the printer's EWS page:
On the printer click on Wireless, then select Reset Wireless.
Turn the printer Off and back On.
If the wireless light is not blicking, click the wireless button and turn the Wireless Radio On.
From your Mac click the Wireless icon and then on Join Other Networks.
Click on Show network and connect to the printer SSID which includes J610 as part of its name.
Note: Allow 1-2 minutes to fully establish the temporary connection.
Open Safary, then click the Bonjour menu and select the listed Deskjet 3050.
Note: if there is no Bonjour option at the top menu, click Safary > Preferences > Advanced and check both of the Include Bonjour options at that screen. click OK and the Bonjour menu will appear.
Go to Network / Wireless and follow the Wireless Setup Wizard to connect the printer to your home network.
On your Mac click the WiFi icon and reconnect the Mac to your home network.
Now both your Mac and the printer are connected to your network, go to Printers & Scanners and add the printer by clicking the plus sign.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I cant find the printer code on my HP deskjet 3050 J610 all-in-one printer

I have disconnected wireless and turned off printer and turned on and re connected. I have changed DNS to 8888 and secondary to 8844. I have printed out 5 Network configuration pages and 4 Printer status reports and NOTHING has the printer code on it. How can I get one? Thanx, Anna
This question was solved.
View Solution.

Hi Anna,
I afraid the Deskjet 3050 (J610) does not support any web service as ePrint or Print Apps.
Only the Deskjet 3050A (J611) support ePrint as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en&product=5063582&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Windows 8.1 and Deskjet 3050 J610 Software not working

New Desktop running WIndows 8.1 and the HP Deskjet 3050 J610 printer/scanner. I can load the drivers to make the printer work but the scanner software is not present.
When I try to open the Scanner Software:
I get the following:
Would like a fix. Been fighting with this for a while.

ClasicD_72,
It appears that one of our Experts is trying to answer your inquiry on another member's Thread on this subject.
I will comment briefly here and then withdraw.
Commentary
After installing the Full Feature Software, at least in many cases involving Windows 8.1 installs of the printer software, you should see a Printer Assistant shortcut on your Desktop. You can use the Printer Assistant to access the Scan to Document or Photo software package.
Although there is a scan program within the hierarchy of many of the Printer software folders, I have not seen an recent instance where the scan program is a stand-alone executable. In other words, you must call the Scan package from a parent program, even assuming you can find a "Scan" program in Bin or another similar folder.
Example:
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Error when trying to scan from my HP DeskJet 3050 J610 (com.apple.ImageCaptureCore -9929.)

When trying to use my HP DeskJet 3050 J610 series I get an error (com.apple.ImageCaptureCore -9929.) It can't scan. Anyone know how to fix it?

The error is ICReturnScannerFailedToSelectFunctionalUnit, but I am not sure what that means. Is there an HP disgnostic available? Are the drivers current? Maybe HP has some experience with this error.

Cannot complete wireless setup for Officejet 4500 G510n using HP Installer

Hi,
I hope someone can help me with this problem.
I bought an Officejet 4500 G510n and all was working fine on my old MacBook laptop. I have recently switched to a MacBook Air running OS X 10.8 and I can no longer connect wirelessly to this printer.
I have tried the following:
- resetting printer settings from OS X "Preferences" using USB cable.
- disconnecting USB cable to printer.
- downloading and installing the latest software drivers for OS X 10.8
- reconnect USB cable to printer to start printer setup.
The problem arrises when I am performing the set-up task:
- Screen shows invalid network details and gives me no option to continue.... only to go back to the previous page. I am stuck with no options at the moment.
Attached is the screen-shot of what I'm seeing.
Any help would be very grateful.
John

From what you describe, you are using a USB cable but the information displayed there is for wireless. What you would want to do is install the printer using the USB cable and selecting USB installation, then use the software to complete the USB to Wireless conversion.
Either this, or you can set up the printer on your wireless network using the wireless setup wizard and then install using Networked - Wireless as the installation type.
Happy Holidays!

Deskjet 3050 J610 Wifi Printing on Windows 8.1

So I've successfully Connected my printer wirelessly to my router. Its an HP Desjet 3050 J610 Series.
Steps reproduced.
- Installed Drivers (Run as admin)
- Setup Printer over Wifi via HP setup. Success. I'm even able to ping my printer!
- Print a test page Over wifi...Error!
- Used WPS Sync Button on both Printer and Wifi Router..Failed
- Reset PC.
- Uninstall/Re-Install Drivers. Still Failing.
End
Priting works fine Via USB but not over wifi. I have a Linsys E1200 Router. I've also checked Printer/File sharing is enabled, & ran the Windows Auto Troubleshooter. But no dice, status displays "Error" on Device and Printer Settings.

Hello LL_01,
Welcome to the HP Support Forums!
I see you have been trying to setup the Deskjet 3050 on Windows 8.1 over WiFi, it will allow you to ping the printer but not print.
See if the Print and Scan Dr is able to locate the printer over the network and print with it.
If unable, try reconfiguring the printer via USB, these steps removed from this guide: Installing the Printer Software for a Wireless Network Connection.
Optional : If you previously installed the software for a USB connection and now want to change to a wireless network connection, follow these instructions to remove the USB installation before you continue.
Right-click the Start button ( ) or the lower left corner of the screen, and then clickSearch .
In the Search box, type HP , and then click the icon for your printer. The printer software opens.
Click Utilities , and then click Printer Setup & Software Selection .
Click Convert a USB connected printer to wireless or Connect a new printer (the phrase differs depending on the version of software your computer is running).
Follow the on-screen instructions to finish installing the software. Once the printer has been set up on the wireless network, there is no need to continue with the steps in this document.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Deskjet 3050 J610a Wireless issues

I'm trying to set up my Deskjet 3050 J610a to use over my wireless network, the printer sets it self up on the network and connects fine to the router, but is unavailable when i use the wireless network setup tool.
Router: Linksys Wag160n
Auth: WPA-PSK AEK or TKIP
Signal Quality is Max
IP assigned to Printer 192.168.1.111 Per my DHCP
OS: Windows 7 Home Premium
latest drivers & network diag tools etc
The Printer Network Config page reports all is fine
I can see the printer connected to my router but can't access it via any of the HP software.
McAfee Security Centre (AV&Firewall) were on during Printer install but I've tried disabling them but still no luck.
Any Help??

Did you use this: Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP deskjet 3050 J610c - draft print problem

Hi,
I have just bought the above mentioned printer and noticed that when I copy something the resulting printout is not in draft mode and so uses a lot of ink. I have gone through all settings, even on pc, and have not found a way to set the copy print setting to draft. Is there a way to set the printer to always print in draft mode?
Thanks for your help.
Regards
morris

I can print in draft on my deskjet 3050, but I can't set the copy function to draft mode. I've searched manuals, printer settings on computer and printer, internet, and all I can find is posts similar to this.
And so I have the same problem - excess ink consumption, and the paper is messed up because it's soaked with ink.
Had I known it doesn't do draft mode copying, I doubt I would have bought the printer. Almost all my printing and copying is done in draft mode. I'm really annoyed. I'd rather feel stupid though - if someone could point out how to set the printer to produce copies in draft or low quality mode.
Funny, HP advertises this printer as being environmentally friendly ... "ENERGY STAR® Qualified" they say whatever that means. I don't think wasting ink is particularly green.
"Eco Highlights
• Designed with the environment in mind—created from 35% recycled plastic.
• Recycle or reuse 99% of this packaging—including a reusable bag.[eco01]
• Low energy: Sleep mode is comparable with powering a clock radio."
Boo to you HP .

HP DESKJET 3050 J610

Moved printer to a different location with different router & now cannot print wireless. Can anyone help.

Your printer is probably still configured to connect to the old router. You will need to run through the wireless setup agin to get your printer setup with the new router.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Wireless setup problem for HP Officejet J6480 All - in - One printer

I can not get my printer setup wirelessly. When I send a print job to it, the message comes back, printer offline.
I can hook up the USB cable and it prints fine. I installed the software on my IMac as instructed. I used the HP Printer manager. My IMac is setup with the airport and I have a wireless router.
Through the setup button on the printer I printed off the "wireless network test report" and the "HP network configuration" page. They show no errors.
Can anyone help me out?
I need to be able to wirelessly print from my IMac, a Gateway desktop, a Dell laptop and a Toshiba laptop.

connecting Wireless to HP j6480 printer
Problem is when I go to menu and press wireless network printer option. It’s just press menu then use the arrow keys on each side of the OK button. Then press down to Wireless Network Wizard. Press the OK button. I think the Wireless Network Wizard is the third option down when you are in the Wizard. It will then ask you for the wep for your router. I have the Verizon Jet pack from Verizon. But I assume you could use any router. My router wep was all numbers for example 99000627xxxxx all numbers. I tried and tried and kept putting in the wep but it kept coming back wrong wep code. What I did not watch was the numbers I was putting in were wrong. For example when I was putting in 990000627XXXXX that was not being put in. What was being put in was something like ypt$&^ etc. I did not know when you were putting in the numbers you had to keep pushing on the 9 key until a nine came up, then it would go to the next number you had to put in. You had to do the same for the second, third, fourth and etc until you entered all of the code. Then the wireless router connected. Why does someone not tell you that.

HP No Longer Supports Deskjet 3050 J610 in Maverick.

I found out today in talking to a HP Customer Service Rep, that they are no longer going to support the HP Deskject 3050 with updated drivers. This is quite unfortunate because this printer is less then 2 years old and is still very functional. In fact, there are a number of apps that require an HP printer only that I won't be able to use any longer (one being Grocery IQ, one of my favs). As a FYI, the printer can still be used plugged in via USB, but I can no longer get it to connect itself to my wireless network. It was working initially with Maverick but I made the mistake of having to change the name of my network for security reasons and when I did that, it wouldn't connect to the network again I literally spent hours trying to get it to work. I un-installed and reinstalled software, etc. The most recent software (downloaded from the Apple website that is suppose to support Maverick) crashes in an attempt to set the printer up. I even tried it on another of my Macs with the same crash problem. I did talk to an Applecare advisor who tried to help me but we weren't successful and that's why I ended up calling HP. Apple was even kind enough to call me back to follow up and the advisor was very surprised at the position HP has taken. I've always been partial to Epson but bought the HP for use in a couple of instances where I needed their printer. Based on this, I won't be purchasing another HP printer any time soon. I wanted to get this out to the Apple Support Community just in case someone else was having the same problems as I was. Reply if you have any questions.

This worked for me with my HP printer:
uninstall all HP apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

Similar Messages

Maybe you are looking for