Deskjet 3050 wireless problem

Hi, Hope someone can help ASAP please!!!!!! Have a Deskjet 3050 wireless printer, which i have tried all ways of installing, but cant get it to print wireless. I have a Compaq laptop with wireless, Belgin Wireless router, I can see the network on the laptop, no probs and thats how i connect to internet. When i go through the wireless menu on the printer itself it shows up as connected to my network with excellent signal strength, and I can print out the reports showing all is well that end.
I can see my network on the laptop and can also see the printer, although not sure if its as i installed over USB connection initially.
I can print when connected through USB
Any help would be appreciated.
I am running Windows 7 BTW
Many thanks
Rob

Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Deskjet 3050 wireless works then doesn't

My Deskjet 3050 wireless problem cycle includes 1) light blinking 2) after I re-set up the wireless...it works 3) day later, when I try to print HP message says unable to communicate w/ printer BUT wireless light is SOLID and Network Config page show it is properly connected via ip address is connected via ip address. Even though properly connected, the 2nd page of the network config printout shows it doesn't discover my current wireless network.
I've tried to re-set up wireless printing (HP printer set-up utility that came with the software) and the network diagnostic utility, but this cycle always repeats itself.
Maybe a router problem. I'm on win 7 and using a cisco E2000 router.
Can anyone assist?
Thanks

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Deskjet 3050 wireless connection trauma

Hi, my Deskjet 3050 has stopped working over the wireless network and I'm stumped. It was working fine, but has now stopped. My laptop is connected to the home router (BT) and the printer is also connected to the same router (according to the router config page), but I can't connect to print. I've gone back to the beginning and re-installed the printer and all drivers and software, I can print with a USB, I can transfer wireless config details via USB, but I still can't print wirelessly. Help?

Hi PG-PG,
I understand that you are having a problem with getting the printer working on your wireless network. I will try my best to help you resolve this. I suggest power cycling your network.
How to power cycle network
Follow these steps to reset your HP printer, your wireless router, and your computer.
1.Press the Power button on the HP printer to turn it off.
2.Disconnect the power cord from the rear of the HP printer.
3.Disconnect the power cord from the wireless router.
4.Turn off the computer.
5.Wait 30 seconds.
6.Reconnect the power cord to the wireless router.
7.Wait 30 seconds, or until the router is fully on and ready.
8.Turn the computer back on.
9.Wait for the computer to reload.
10.Reconnect the power cord to the rear of the HP printer.
11.Turn the printer back on.
If this does not resolve the issue then I suggest setting a Static IP Address. In this document for Printer Does Not Maintain Wireless Connection has steps for setting that up.
I hope this information helps, please let me know how it goes.
Thank you,
I worked on behalf of HP.

My hp wireless deskjet 3050 all in one printer won't recognize my laptop anymore

When I try to print from my HP Deskjet 3050 wireless printer nothing happens. However, I can print from my desktop which is also wireless with this printer. It has been fine for months, now all of a sudden it just doesn't seem to recognize my laptop. When I go to Troubleshoot HP, it says to contact my network administrator. I don't even know how to do that!! I know my wireless connection is on because it works with my other computer. I have tried turning everything off...rebooting everthing....and it still fails. Please hlep me! I did print a network configuration page which said that no problems were found. Also my router is a Cisco linksys E1000.

Hello,
Try this out.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02266743&cc=sg&dlc=en&lc=en&product=4066452&tmp...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Life is too serious to be taken seriously

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

Deskjet 3050 J610a - Unexpected wireless connection problem.

Running:
MacOSX 10.7.4
HP Software: HP_Lion_Ink_SW_v12.13.17
Printer: Deskjet 3050 J610a had been working perfectly through wireless connection from a
MacBook5,1 Intel Core 2 Duo, while I had been using HP Software HP_Installer_DJF4100_v9.7.1, that was *not* meant for this printer, but I could 'ADD" the printer Deskjet 3050 via System Preferences, through HP Socket,
Looking [unwisely] for a more "functional" configuration, I looked up HP support and found that a specific software had been released for computers running "Lion".
So I uninstalled the previous DJF4100 software, restarted the computer, and installed the new software and drivers for Lion as indicated above.
Now the printer Deskjet 3050 J610a shows up in the computer's network under 'Devices" as
"HPJ610a.047DED", Network Type:Computer-to-Computer. It is also detected with "
Security:None", whereas my whole home Wi-Fi network is encrypted with WPA/WPA2 Personal.
I could of course regress to the previous software and configuration, but before doing that I would like to understand why this new software that has been released by HP for Mac computers running Lion is behaving in such a way, why the printer shows as a stand alone device (which it never did before).
As I said, before I regress to the previous configuration, using a software that originally is not the one required by the printer, neither by the computer's operating system, I welcome all information and suggestions.
I need that wireless connection!
Thanks in advance.
This question was solved.
View Solution.

Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing problem with HP deskjet 3050 all in one J610 series

I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2). Connecting is by USB port. I have not used the printer for some time, but have done all the maintence checks & it is good to go. When I want to print a letter the only thing that gets printed is the email address which is coloured blue. I think the problem is in the settings of the printer features. I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
I would appreciate help with this problem. A definition of the terms used in the printer features might help me resolve it by my self.
Thanks
This question was solved.
View Solution.

Hello @Tellen,
Thank you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. If you print a test page from the front panel do you see the same issue?
I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My wireless HP Deskjet 3050 printer will not print from web sites.

My HP Deskjet 3050 J610 printer will not print from web sites - it prints ok from WORD, etc. I keep getting the error message: "An unknown error occurred while printing." This problem only arises with Firefox browser.
The printer is connected wirelessly to a network and this occurs when I use a laptop on the network. It is also connected via cable to a desktop computer but there is no problem in printing from the desktop.
Any assistance would be appreciated.

That sounds as if you need to investigate to see if you were able to clear all of the paper that was causing the jam.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How come my Deskjet 3050 wont print wirelessly?

Alright so here's the problem.
First of all I just bought a Deskjet 3050 All-In-One J610 Series printer on ebay. It came today and I tried to set it up wirelessly and through the USB. It works fine with the the laptop (we use it as a home computer) its a Windows Vista 64-bit.
Now everytime when the printer is not connected to our router, it shows up on the little connect to wireless networks on this computer, my netbook, and my Ipod Touch. But whenever i connect it to the router via WPS and via PIN number, it doesnt show it up on anywhere. I tried to do the setup on screen instructions CD but it says that it is connected but its not showing up or something and it says that I have to connect with the printer's IP address. And it said something about a warning saying that if you connect it like this, then if the ip address changes i would have to do a bunch of crap that i dont feel like doing.
Is there any possible way that i can fix this???? i would love to print stuff from my netbook.

Hello lake5pilot
If you have not already please try the following article. It should help with the issue. Especially the part in the guide where you set a static IP on the printer. Even upon reconnecting it should stay the same. I hope it works well for you.
Printer does not Maintain Wireless Connection
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

"The HP Deskjet 3050 J610 series was not found." Can't scan with wireless printer to desktop. Help

Our new wireless printer will not scan. I have tried to scan from the computer and get the below error message and then I have activated the scan from printer and when I push the scan button on the printer, I get the same error message.
Thanks!
Product Name: HP Deskjet 3050 J610 Printer/Scanner/Copier
Operating System: Windows 7
Error Message: The HP Deskjet 3050 J610 series was not found - when trying to scan.
No changes made to system

I had some problem. I found you must use HP 'Update IP address' program to add printer instead use window add printer. All programs -> HP ->HP Deskjet 3050 610 series -> Update IP address.

HP Deskjet 3050 - Unable to connect to WPA secured wireless network

Hello,
My first post here so please excuse any faux pas on my part. I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since. I'd be really grateful if someone could possibly advise on how I can resolve this.
I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue. I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer. If I disable the security, the printer connects fine.
I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled. The router is broadcasting on 802.11G/N mixed mode.
I'm installing the software supplied on the setup CD on a Windows XP SP3 system. I have confirmed that the network the PC and printer are connected to are the same.
A question as well, if I may: I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010. The release notes indicate improved networking, but don't elaborate beyond this. Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
Finally, just a note that I'm partially sighted and am using a screen reader on all systems. I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
Thanks in advance for your help, which I really will appreciated.
Have a pleasant day,
All the best for now and take care,
Hussein.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
This question was solved.
View Solution.

HI,
firstly, apologies for the delay getting back to you. Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved. It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
To resolve the problem, I did the following:
1. Disable all security options for the network, so it's just an open network.
2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
3. Locate the printer's IP address. I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
5. Under the advanced options, configure the settings for the network, including security protocol and passphrase. Remember to enter the SSID of the network exactly as configured on the router.
6. Apply the settings and log out of the printer's control panel.
7. Log back into the router's control panel and re-apply the security options. Be sure that they match those match those entered for the printer.
Hopefully this will be of use to others in the same position.
Thanks again for your time.
Best,
H.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.

Deskjet 3050 no longer printing wireless or wired

I have an HP Envy widows 8. and deskjet 3050 J610a and it no longer prints. I keep getting an error message :"Unable to Communicate with Printer". it worked just great a couple days ago and nothing has changed since then other than it stopped printing. Can i talk with an HP customer support person somehow?

Hi nikki879,
Here is a way you can connect the printer to your router:
-Restore network defaults inside the wireless menu on the printer front panel.
-From your computer, connect wireless to the printer's network (it should be a name similar to HP-Setup-xx-Deskjet 3050A J611).
-After successfully connecting to the printer, open your web browser and type in 192.168.223.1 in the addressbar and press enter.
-Click on Wireless Setup Wizard
-Select your router and enter the password to connect the printer to the router.
Rerun the printer software from your computer to rediscover the printer over the network.
Show support by clicking the Thumbs Up in the post that resolved your problem. Doing so will help other forum members find their solutions too.

Deskjet 3050 J610a Wireless issues

I'm trying to set up my Deskjet 3050 J610a to use over my wireless network, the printer sets it self up on the network and connects fine to the router, but is unavailable when i use the wireless network setup tool.
Router: Linksys Wag160n
Auth: WPA-PSK AEK or TKIP
Signal Quality is Max
IP assigned to Printer 192.168.1.111 Per my DHCP
OS: Windows 7 Home Premium
latest drivers & network diag tools etc
The Printer Network Config page reports all is fine
I can see the printer connected to my router but can't access it via any of the HP software.
McAfee Security Centre (AV&Firewall) were on during Printer install but I've tried disabling them but still no luck.
Any Help??

Did you use this: Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
It will only print when connected by usb cable.

Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Deskjet 3050 wireless problem

Similar Messages

Maybe you are looking for