Deskjet 3070a - Deskjet 3070A - replaced cartridges but now it stopped printing black

Hi,
I just replaced all my cartridges but the black colour is gone - I even tried to replace the black cartridge but it did not solve the issue.
The printer is out of warranty but I spend a lot of money on new ink so I would appriciate to receive advice on how to solve this issue.

The document here may help black not printing on your Deskjet 3070a.  Be sure to check the vents as shown in solution three.
How far out of warranty? You can check with HP's warranty tool here.  What country are you located in?
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Photosmart​6520 replaced cartridge 564 now will not print

    photosmart6520 replaced cartrage #564 (black) now will not print

    Hello santa309 , and welcome to the HP Forums. 
    I see you are having issues with your black cartridge not printing.  I would like to try and assist with that!
    I would first suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend following this document on Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    I would suggest as well to utilize this document on  Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I imported a photo from my email to my iphoto but now my HP printer is printing my documents from the photo cartridge.  How do I get my printer to print using the regular black cartrigde.

    I imported a photo from my email to my iphoto. I  am on a Mac OSX version 10.6.8.  But now my HP printer 7510 is printing my documents with the photo cartridge rather than the regular black cartridge.  How do I correct this.

    Seems like an odd question for an iPhoto forum and more one for an HP forum.

  • HT201077 I have windows 8.1 and ios7.  contacts and calendar stopped streaming to my laptop but was ok on ipad and iphone. That problem fixed but now photos stopped streaming to laptop.  Any suggestions

    I have windows 8.1 & ios7.  Contacts & calender stopped streaming to laptop. ok to ipad & iphone.  This was fixed but now photos stopped streaming to laptop again ipad/iphone talk.  All settings seem ok.  Any suggestions?

    Hey pat121,
    I would run through the recommended troubleshooting steps in the following article to see if that alleviates the issue:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • Installed the universal driver but now the paper printed is rolled

    installed the universal driver but now the paper printed is rolled

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I accidentally put my itouch 4th generation in the washer, so i took my itouch apart and dried it but now the screen is black but my itouch still makes a sound when i plug it in. what should i do?

    so i accidentally washed my itouch and i took it apart and dried it but now the screen is black, i restored it but it still doesn't work but it makes a sound when i plug it in like it normally would. please help me

    Yu can try the suggestions here:
    iOS: Not responding or does not turn on
    Was the restore successful?
    If so I conclude thay the washing damaged something and servie is required. Ormaybe you damaged something when you took it apart/put it back together.

  • AGFA ppd driver worked but now reports the printer is busy?

    AGFA ppd driver worked but now reports the printer is busy?  The network location is definitely available by looking at the shared folders.  I can print through the network using the other Mac Book Pro that has the same OS and Driver.  This happened after the printers were cleared off and I had to reinstall them individually.  The driver was placed in th users profile printers folder and then applied to the IPP priter during setup a before.  -Any help is appreciated

    You're profile indicates your Mac has v10.5.1 installed.
    If that is correct, you need to update to v10.5.8.
    Click Software Update from your Apple  menu drop down menu or open System Preferences > Software Update.
    After the update is installed, restart your Mac.
    Turn off the printer then turn it back on then try printing via USB.
    If that didn't help, try here >  Mac OS X 10.5: Included printer drivers

  • I want Firefox to ask me if I want to save this password for login purposes. It did that with the first 3 sites i went to... but now it stopped asking!

    Question...
    I want Firefox to ask me if I want to save this password for login purposes. It did that with the first 3 sites i went to... but now it stopped asking!
    I've gone to several DIFFERENT websites that require a login and in ALL instances since the first 3 it saved... I don't get the popup window asking if I want to save the password.
    How do I get that feature back????
    Thanks...
    Rick

    Hi seraphim99,
    You will get that [http://dmcritchie.mvps.org/icons/fx4_quittabs.png Quit Firefox message] "Do you want to save your tabs for the next time it starts?" [Save and Quit] [Quit] [Cancel] if you follow what is currently step 31 in the link I had provided [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost Restoring tabs from a lost session] (#tabslost)
    Which indicates as follows: (boldface is user set)
    * <b>browser.showQuitWarning user set boolean true</b>
    * browser.tabs.warnOnClose default boolean true
    * browser.warnOnQuit default boolean true
    * <b>browser.warnOnRestart user set boolean true</b>
    Links were included there for assistance with '''about:config''' for those that don't know how to change configuration variables, along with additional reference for that and so that other similar questions of making Firefox 4 look/act like Firefox 3.6.17 would also be answered particularly the items in the first 10 steps in the same area. Which was addressed by the following part of my original reply
    You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic ["http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)].
    I don't know if you looked at the web page or not, but I've highlighted some additional words there to try to make the webpage more clear to others in the future.
    Hope that Helps

  • Hp LaserJet 400 M451 replaced cartridges​, but they still read "low"

    I have an HP LaserJet 400 color M451nw
    When the cyan cartridge said it was low, I replaced it.  It then printed another 100 pages or so, without problems, then the printer told me the magenta was low , and I replaced it.  It printed a few more sheets, told me the yellow was low, I replaced it.
    Now, although 3 cartridges have been replaced, it tells me the cyan cartridge is empty, the magenta cartridge is at 20%, and the yellow cartridge is at 70%  (all 3 of these cartridges are brand new HP catridges)
    Now, it will not print at all, and insists the cyan cartridge is very low.
    I have inspected all of the cartridges, was sure they were seated correctly, and I have reset the printer several times.
    I cannot get the printer to "see" I have plenty of toner.

    [Disclaimer - I have little experience or expertise in printers that use the 02 ink cartridges.]  That said the issue sounds like one that would be caused by air in the plumbing.  There is a long thread here, reading through has a few reported successes from reseting the printer.  I would suggest reading and trying the steps in these posts:
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m85... by longtimemacuser
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m17... by GRO
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/257743#M1... by sjwoolf
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/564581#M3... by sparky2011
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Memory died, replaced but now can't print with apple apps

    User installable memory died, kernel failures, finally froze, replaced, all better but had to use Diskwarrior to clean up mess on hard drive. Now everything works BUT I can't print from Apple apps. MSOffice updated and prints, Safari, appleworks etc. don't all crash when printing. Cleaned out Printing PPD's, printer defs in Library, reinstalled printers from scratch, disk repair, etc. Even rezapped PRAM again. No luck.
    Seems like this is tied to an apple OS function I haven't found yet.
    Anybody got any ideas before I reinstall the OS?
    thanks

    Thanks Greg,
    Well, bottom line, had to nuke the HD and reinstall the entire system. Everything is fine. Seems the archive and install couldn't deal with the degree of disk confusion caused from the declining memory prior to failure.
    thanks

  • HT1386 I broke my ipod, went to the apple store and replaced it. but now i can't sync it to my computer. How can would i be able to sync it?

    I broke my ipod, went to the apple store and replaced it. But now i can't sync my new ipod  to my computer.
    How can would i be able to sync it?

    See:
    iOS: Device not recognized in iTunes for Windows
    You may have to update iTunes on your computer. The latestest is version 10.6

  • My ipad has frozen leaving candy crush, I tried to put it off using the on/off button, but now I have a black screen with no function. I can't read the serial number on the back as it is tiny.! any ideas?

    My Ipad mini has frozen leaving Candy crush. I tried to put it off using the on/off button, now the screen is black with no function. I can hear Siri if I push the control. It is charged. Any ideas? I can't read the very small printed serial number on the back so can't use the Apple help as they require the serial number.

    Hold down the sleep/wake button and the home button for ~10 seconds, or until the apple logo appears.  This is called a reset.
    HTH

  • OfficeJet 6500 Wireless E709n - faulty yellow cartridge sensor - How do I print black only?

    Product is 5 years old.  Error message states that the Yellow Cartridge appears to be missing.  Unable to resolve following multiple Sensor and Sensor Window cleanings. Powered off/on several times including pulling plug. Attempted one new Yellow Cartridge (not a refilled used one).  Pulled all cartridges, cleaned, opened/closed the printer, lifted/lowered the gray print-head lever.  Unable to figure out how to print in only Black ink, if possible.  The cost of a new printer is about the same as Tech Support help (out of warranty).  Any thoughts on how to resolve (other than buying a new printer - unless it is time)?  Thank you in advance.
    This question was solved.
    View Solution.

    Figured it out.  I missed cleaning some parts of the PrintHead.  Solved.

  • Re: Deskjet 3070A - replaced cartridges but won't print now!

    Hello,
    I have the same problem. Replaced my black cartridge on my deskjet 3070A and now it won't print any black ink at all.
    Please can you help?
    Thanks,
    Tom

    @Tskinner1 
    Hi Tom, is the printer in warranty? (typically it's one year from purchase). Can I ask which country are you based in?
    Troubleshooting steps
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04030353
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Deskjet 3070A - replaced cartridges but won't print now!

    Ciara 
    Can you please send me info on how to fix this issue?
    Thanks 
    D
    This question was solved.
    View Solution.

    Hi loxluta,
    I was just wondering if the steps @Ciara_B were able to help you get the issue resolved.
    If not maybe I can help, just let me know here or in a private message
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for

  • Filter Orientation is not working correctly

    Hello all, This is my first post so thanks in advance for any help and advice given. I have recieved a CD of images from one of our suppliers and i need to separate them into Portrait, Landscape and Square. I have open the CD in Adobe Bridge via CS5

  • How do i get my old music back, How do i get my old music back

    Ive boughtg music prevusly and forgot to back it up and still have it on my i pod but i want to add some new music, on the new computer bacause my old on crashed do i just have to rebuy my old music?

  • CS3 Optimize Rendering For Memory vs Performance

    Ok, the description of this option is pretty vague: "By default, Adobe Premiere Pro renders video using the maximum number of available processors, up to 16. However, some sequences, such as those containing high-resolution source video or still imag

  • The print is too small.

    The print is too small. I can't find anywhere to enlarge it. I've tried settings, but that just changes the density.

  • You haven't answered my last question

    ''locking - original question is here - https://support.mozilla.com/en-US/questions/870725'' this keeps appearing in my hotmail and blueletter bible .com sites.how can we fix this please. ''You may need to wait more than an hour for an answer.''