Deskjet 3510 - Refuses to print from Mac

I am trying to install a new HP3510 Deskjet and I'm ready to smash it.
I downloaded the install file from the website (no optical drive), ran it on my Mac Mini running OS X 10.7, and...I can't print.
I plugged in the USB to do setup, and it worked, it is on my home network. I can AirPrint from my iPhone. I can plug in the USB and print.
When I go to print via Wifi from the computer, the printer queue shows up, it tells me it is connected to the printer, and then it says it gets to 2% completion and sits there. After 5 or 6 seconds, the printer "status" in the print queue changes to "idle."
If I cancel the job, I then cannot get the printer to turn off without unplugging the power cord.
I have tried rebooting both devices, uninstalling and reinstalling the printer at least a dozen times, and I am incredibly frustrated. Can anyone tell me what is going on and what I can do to fix it?

Hi Mgrisell,
Go ahead and set a static IP for the printer. You can find out how to do that here. This should resolve the wireless issue.
Don't forget to mark a post as solved if it fixed your issue

Similar Messages

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

How to print from mac pro to 7520

Trying to print from Mac ProBook to my HP 7520 all-in-one printer. I don't want to use USB nor WiFi. How do I set that up?
This question was solved.
View Solution.

Hi Beverly,
Thanks for clarifying.
So you would like to use a wireless connection without using a Wireless router.. that can be done using the HP Wireless Direct feature which create a wireless network, hosted by the printer itself:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings , and then touch Wireless Direct . The Wireless Direct Settings menu displays.
On the printer control panel, touch Wireless Direct again, and then choose a security option:
Touch On (No Security) if you do not want to use a passcode to connect, Touch On (With Security) if you want to use a pre-assigned passcode to connect and then touch Yes to continue
NOTE: If Auto-Off is enabled, touch OK when the control panel prompts you to disable Auto-Off .
Touch Display Password , and then touch OK to continue.
5. From the Mac click the Wi-Fi icon, select Join Other Network and then click Show Network.
6. Select the Wireless Direct network of your printer, it will include 7520 within its name.
7. Now you may install the Software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-106189-3&cc=us&dlc=en&lc=en...
If you leave the truck, I believe the Mac should reconnect to the network automatically but I'm not sure, you may have to click the Wi-Fi icon and select the Wireless Direct network when getting back.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

Office jet 6100 series not printing from Mac OS X 10.9.3

office jet 6100 series not printing from Mac OS X 10.9.3. This seems to have happened suddenly. USB hardwired to a new Macbook Pro. HP Inkjet 6 Driver 2.0.3 Any ideas?
This question was solved.
View Solution.

I would recommend resetting the printing system, then rebooting the mac to allow it to scan for the usb connection to the printer. It should then automatically add the printer back, and if any other updates are needed, it'll ask you to install htem
http://support.apple.com/kb/PH14141
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

HP Deskjet 9800 won't print from Chrome anymore

My HP Deskjet 9800 won't print from Chrome, but prints fine from IE and Mozilla. The light on the printer starts flashing when I try to print from Chrome, but nothing ever prints.

hi there mktng;
I see perhaps a problem of google chrome and not of the printer. can you verify if your chrome have any pending updates or if it is as normaly updating automaticly.
Let me know
Kind regards;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp cp1160 deskjet printer won't print from Mac OS 9

Hello,
I am running OS 9.2.2 on my Mac and I can't seem to print to my HP CP1160 inkjet printer.
It is connected using USB. My other USB devices work fine. In fact in the Apple System profiler, I can see the CP1160 printer listed as being connected and it also appears in the chooser. So it appears to be OK. Unfortunately however, it does not print.
I am using the correct driver for OS9. It is called: "hp deskjet v5.4" installed by the "OS 8-9.x-Classic installer".
Now when I go to print it does not print and the file sent to the printer appears in the print spool window for just a few seconds and then disappears.
Then this error message appears:
document "nameofdocument" failed to print on the printer "cp1160" because of an error. -28
followed by the choices: cancel job, hold job or try again
And when using the test feature of the hp inkjet utility this error message appears:
"There was a communication error, make sure the printer is connected and turned on."
Why will it not print?
What should be my next troubleshooting step?
Thank you for any suggestions,
PS It is interesting to note that this printer works fine in OS10.1 on the same computer and it also works with OS 10.4 on another computer. The computer that has this print problem has both OS 10.1 and OS 9 on it. It prints fine from OS 10.1 but not from 9. I installed the appropriate driver for OS 10.1 and it works fine and I installed the appropriate driver for OS9 and it is this OS9 driver that does not seem to want to enable the printer to print. Thank you for any suggestions.
Specs:
Computer model: 233 MHz G3 beige with ratoc USB/firewire card.
OS: 9.2.2.

I tried all of these suggestions but none were successful. I suppose my third party card (Ratoc USB/Firewire card) is just not compatible with my printer. Thats too bad. I guess the only way I can print with this printer is to boot up in OSX. That works. I wish I could print from OS9 too however. Thanks again Kenichi for your good suggestions It was a good try.
For the record, here were the extensions I disabled (and re-booted after disabling each one at a time):
Desktop Printer Spooler
Desktop Print Monitor
Print Monitor
Printing Lib
Printer Share
USB Printer Sharing
Desktop Printer Menu
color SW 1500
color SW 2500
color SW Pro
CSW 6000 series
Imagewriter
Laserwriter 300/LS
Laserwriter 8
therefore these extensions do not conflict with my cp1160 - it must be something else - perhaps my third party USB card (Ratoc USB/Firewire card).

Print to Windows Shared Printer from Mac on wireless network

My set up is: HP Deskjet 1050 410 USB to a WIndows 7 PC. The PC has 4 users, each password protected for login and public (not protected) folders. The Macbook is running OS X 10/6/8. I have downloaded the latest HP drivers.
I found the printer on the workgroup network and installed it as the only printer on the Macbook. When I send a job to print, I am prompted to either login as a guest or as a user with a password. Either way, I get an eror message "On Hold (Authentication required)" Under Job Info is the following message "NT_STATUS_INVALID_PARAMETER"
THis is an improvement over what was happening before when I could not find the printer in the list and had to manually use the IP address. Even then, I could not print, I would get a communication error.
The first time I installed the printer driver (an earlier driver and earlier release of OS X 10.6) I had no problems printing from the Macbook. It found the printer and printed without any password authentication. Nothing has changed on the PC, the printer is shared with all users on the network, but I can't seem to print.
I noticed many postings with similar issues but I did not see any resolution. Help! (Thanks!)

hey just want to say thanks to you guys... I just this week switched to Mac after 14 years of heavy PC use. Mac's been awesome except for that I couldn't print to my PC based printer... now I can... and I couldn't of done it with out this apple discussion thread about HPIJS.

Trouble printing from mac to windows printer

I purchased my first mac last weekend and successfully set it up on my home network which is shared with my windows xp desktop. My HP deskjet printer is shared on the network through my desktop windows pc (not on a separate printer router). My mac recognizes the printer on the network but it prints meaningless garb when I ask it to print a document. Any suggestions to rectify my printing problem???
iBook G4 Mac OS X (10.4.3)

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

HP DeskJet 6980 or 6940 printer in Mac OS 9?

These new printers come with Ethernet, AirPort (option), Bluetooth (option), PictBridge and USB support. Additionally, no expensive colour cartridge is required to run the printer and a duplex module is available too. However in contrast to the predecessors DeskJet 5850, 6620 and 6840, HP has dropped the Mac OS 9.1 support!
Does anyone know how it is possible to use the DeskJet 6980 or 6940 via Ethernet in Mac OS 9? Has anyone played with such a beast (5850 onwards) on a Mac with only 64 MB of RAM?
Because the installer of the HP DeskJet 6800 series requests for 128 MB of RAM, I installed the driver on a better machine and extracted all the files to this 64 MB beast. Was not very stable - could not test fully because I do not have such a DeskJet yet - although I am sure I have extracted everything. Probably they use fixed file paths...have not tried.
Has anyone experience with these printers or even better alternative bargains? All I need is an inkjet Ethernet printer which runs from Mac OS 7.1 up to Mac OS X v10.4 sharable between at least to Macs.

Well, I haven't tested anything w/ OS 9 on my new 6940, but your best chance for a reasonable printer able to those things is to find a 6840 before they're completely phased out.
JM

Deskjet 3510 reduced scale printing

The print driver for the Deskjet 3510 is very basic and does not include an option for printing at a reduced scale (less than 100%).
Has anyone figured out how to do this yet?
At this time I am forced to burn up more paper and ink by copying the 100% print at a reduced scale.
Why did HP give the ability to copy at a reduced scale but not print?

For a mac
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=4158&product=5157483&softw...
go to the link choose the version of OSX and install it
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

How to print from mac to windows 7 printer?

I have a wireless home network with a workgroup where I share the Canon MF4150 printer with networked pc's. PC's print just fine.
Just got a MacBook Pro and I cannot get the darn thing to print.
I have connected the printer directly to the Mac and it prints fine.
When I try to print from the Mac across the network, I get: "Canon UFR II Printer Driver - Connection Method not supported.: -9786"
This seems to be so basic, yet after an hour with phone support the best I got was contact Canon or Microsoft. Heck they'll just say it's a Mac problem.
Suggestions??

Read through this thread: https://discussions.apple.com/thread/1057102?threadID=1057102

Can't print to windows Vista printer from Mac OS 10.6.7

Hi All,
Proud new owner of iMac 27" and have successfully managed to set up file sharing between my new Mac and current Windows Vista machine. Windows is attached to a Belkin 54g wireless router. A Canon MP960 is attached to the Windows machine via USB. The Mac is working with the network via Airport.
Problem is that I can't see the printer from the Mac. I have tried manually setting up the printer to be shared with the Mac via:
Mac OS X v10.5 or later
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Click the + button to add a printer.
Press the Control key while clicking the "Default" icon (or any other icon on the toolbar), then choose Customize Toolbar from the contextual menu that appears.
Drag the Advanced (gear) icon to the toolbar.
Click Done.
Click the Advanced icon that was added to the toolbar.
Choose Windows from the Type pop-up menu.
In the URL field, type the printer's address in one of the following formats:
smb://workgroup/server/sharename
smb://server/sharename
Note: "workgroup" is the name of the Windows workgroup that the computer sharing the printer belongs to. "server" is the name of the computer sharing the printer (or its IP address). "sharename" is the shared Windows printer's share name. If the share name contains spaces, replace each space with "%20" (without quotation marks).
Tip: You don't need a "workgroup" when specifying the IP address of the computer (such as when the printer is on a different subnet), or if your Mac belongs to the same Windows (SMB) workgroup.
In the Name field, type the name you would like to use for this printer in Mac OS X.
Choose the appropriate PPD or printer driver from the "Print Using" pop-up menu.
Click Add
I have also allowed printer sharing on the windows machine. I still can't print!
Can anyone please help? Are there some settings I could have missed?

I have the same setup but with a Canon MX850. This did not fix my problem.

I have the airport extreme. I can print from my mac using wireless. I set up the bonjour with my mac laptop. It see's the printer but when I try to print from my laptop it tells me the printer is offline. Printer is on and prints from mac. Help!

I can not print from my mac laptop. I have the airport extreme for wireless. I can print from my Mac using wireless but not my laptop. Laptop see the printer but says its offline when I attempt to print. Help!

Try this:
http://discussions.apple.com/message.jspa?messageID=8096765#8096765
Good luck!

HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

Hi
I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
Please help!

Hi rachelwallace,
Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
You could restore the printer's defaults and try one more time.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Try the previous steps for setting up the Adhoc to Infrastructure connection.
If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Since the software is already installed, all you have to do now is add the printer on the Mac.
Click the Apple icon ( ), and then click System Preferences.
Click on Print and Scan.
Click on the + sign.
Highlight the printer in the list.
Click on the add button.
Test the printer.
In case you don't have a Ethernet cable you may try the wireless direct setup.
On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the Mac, click on the Airport and select the printer from the list to connect to.
Then open Safari and type in the IP address for the wireless direct (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Click on the Airport and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Then add the printer on the Mac.
Test the printer.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Deskjet 3510 - Refuses to print from Mac

Similar Messages

Maybe you are looking for