Deskjet 3800 series Image reversed print when shared over IP XP Host Vista client

Deskjet 3845 color printer
OK when printing direct from XP Host via USB.
OK Printing direct from Vista via USB.
When printing from Vista client to shared XP host image is reversed and color planes are disabled.
Using Vista driver that shipped with OS.
Changed XP software from 3845 driver to generic 3800 series no change in behavior.
Believe problem is with Vista 3845 Driver direct printing OK Network printing is bad.

I am having very similar challenge with Vista 64 home premium and laserjet 1020. The Vista 64 spooler file seems to have become corrupted, since the printer worked for several months with vista before the error messages and continues to work fine with my old computer running xp pro. HP chat sessions (14 hours) have been entertaining but unhelpful, and phone support insists that the spooler error is with the printer, which is more than 6 months old. I have rebooted, reinitialized the printer from Vista and dos, reloaded and reinstalled printer drivers. Did you get a fix for this?

Similar Messages

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

HP Deskjet 900 series, 2 sided printing attachment driver

I'm still using a Deskjet 952c series because it prints beautifully. I had a 970Cse which came with the 2-sided printing attachment. It died but the attachment is still fully functional, and it fits the 952. Is there a driver just for the attachment or a 952c driver that includes the attachment? I've had absolutely no problem using the XP driver with Windows 7 32bit.

The duplex printing attachment must be enabled in the driver as shown in the Vista/Windows 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

MF4150 duplex printing when shared

I love my MF4150 printer, especially the duplex printing. But when sharing to other Macs in the house, the "finishing" option is never available, thus no opportunity to print in duplex mode except from the directly connected computer. Has anyone overcome this limitation?
Thanks!
Chuck

Hello Chuck,
As BDAqua suggested, you will have to install the same version of UFR2 driver on both machines. This is more so when the Mac's are running different versions of Mac OS X. Running the UFR2 installer on the 'client' will copy the PDE's (Print Dialog Extensions) onto the this Mac, which is the plugins that make the Finishing and Special Features options appear in the print menu.
PaHu

Printer/Internet sharing over ethernet not working

Due to unsolvable problems with Airport and 10.5.2, I've decided to set up an ethernet network between my Mac Pro and MacBook. I have an ethernet cable going from the ethernet 2 port on my MP to the MacBook. I am able to establish a file sharing connection, so I know that the cable is working.
However, I cannot get printer sharing or Internet sharing to work.
I have enabled printer sharing in Print & Fax preferences, and selected the USB printers I want to share. But when I go to Print & Fax preferences on my MacBook, although I do see my printer when I attempt to add it the preferred driver does not show up and it selects "generic postscript" instead. This is completely strange, because when I go through the same process when the MacBook is connected to my Airport network (when it isn't dropped out), I am able to add the printer with the correct driver without a problem.
As far as Internet sharing goes, there's nothing happening at all. On the MacBook when I open Network preferences it says "Built-in ethernet isn't connected". I don't know what I'm supposed to do to get this going. I already have enabled Internet Sharing on the Mac Pro ("share built-in ethernet 1 connection with computers connected to ethernet 2"), but I don't know what to do beyond that.
Do I need a switch?

sure, there are workarounds. I was trying not to spend any money!
Mostly I am curious what caused it to stop working.
Thanks for the input!!

"Error while printing" when sharing printer under 10.6

This just started yesterday. When attempting to print from either of two other computers (both 10.4.11) to a printer (HP LJ 1160) connected via USB to a MacBook Pro (10.6.2), the print fails with the cryptic error message: "Error while printing."
I have searched these help forums and have tried repairing permissions on all computers. I have also verified that the /tmp symbolic link is in place on all computers.
I have also tried resetting the print systems on all computers. I am able to add the shared printer on the client computers, but when attempting to print to the selected shared printer I still get the error.
The Console on the client computer generates the following items in the log:
2010-01-18 08:59:49.452 TextEdit[423] PMSessionValidatePrintSettings failed (error code = -50)
2010-01-18 08:59:50.812 TextEdit[423] Invalid PMPrintSettings in print info
Any ideas?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

Hp 61 cartridge (refill?)/hp deskjet 1050, series J410, landfill printer/scanner

I bought an hp deskjet 1050 (J410 series) printer/scanner, about 3-4 weeks ago, at Future Shop, for $29.99. I used all the ink in the hp 61 black ink cartridge, called a local outlet for a large cartridge refilling business & was told they could refill it. They did.
Now, the printer/scanner is displaying the attached message & refusing to print.
What is the opposite of "green"? Has hp not heard the terms "reduce, reuse and recycle"?
Is hp really so short-sighted that they hired engineers to design printers and cartridges so that the printer won't work after the ink in a cartridge is used?
A new hp deskjet 1050 printer/scanner costs $29.99 at Future Shop. An hp 61 black inkjet cartridge costs $19.99. Do they really intend for the printer to go in a landfill after the ink is used? I used to think hp produced quality products - since I bought my first hp 21 calculator over 35 years ago.
I tried getting rid of the warning message (with the "close" button disabled) by starting Task Manager and ending the task; but the printer still won't print. Do you know of another workaround?
At this point, I'm thinking of returning the printer & shopping for a better alternative.
Thanks.
This question was solved.
View Solution.

I would suggest if the message comes up again just say "no". While HP does not prohibit refilling they are trying to crack down on counterfeiting, where refilled/reman cartridges are sold as genuine HP.
BTW, the refill place likely took your used-once cartridge and gave you a different replacement. If you had gotten your cartridge back the printer would have recognized it and not shown this message. I would suggest you contact the refiller for a replacement if cleaning the cartridge contacts as shown here (for a different series, but same principle) does not resolve the issue.
On a related note, I once donated a printer to the local high school. Some time later I got a call from the teacher that it was not working properly. They had replaced the #57 cartridge with a refilled one that had bad color in yellow (now green). We got a replacement and had one of the colors missing. Finally the third replacement worked. I asked why they bought refills and the teacher said they were cheaper. I asked if they were 1/3 the price.... You do get what you pay for.
BTW, I do not work for HP or represent them, I am just a volunteer on this board.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't choose what part of image to print when printing actual size.

I have a pdf file that needs to be printed out to actual size, since the image is a temlate for a part that I need to cut out. Since the actual size is bigger than the paper size, it shows a purple box in the preview box, indicating what part of the document it's going to print. The first time I printed the image, it let me slide the box or the slider below, left to right to select what part of the document on wanted on the paper. But, now it's just locked in place. I'm not sure what changed. Does anyone know how to fix this?
I'm using Windows 7 Pro 64bit, Adobe Reader XI. Printer is a Canon MP495.

Francine, thank you so much for the tips. It took me over two months but I finally got around to trying to take care of this.
I tried your suggestions in order. Steps 1-3 did not fix the problem, but reinstalling from Pacifist did (thank goodness!). Wish I had tried that from the get-go.
Thanks again to everyone for all the suggestions.
There are a couple of things to try:
1. If you haven't done so lately, try Disk Utility
and Repair Permissions. Won't hurt, it's quick and
easy, and there is a remote possibility that it will
help. It actually does occasionally fix something
strange like this.
2. Go to http://www.apple.com/support/downloads/ and
download the COMBO 10.4.8 updater (it is huge, like
148MBs) and run it, then Repair Permissions again.
3. Restart and hold down the Shift key when you hear
the startup chime. This will force the computer to do
a Safe boot. When you see the splash screen saying
"Safe Mode" release the Shift key. The boot will take
longer than normal as the system repairs the disk,
empties font caches, and disables startup items. Not
sure if Image Capture will run correctly with some
Apple startup items disabled, but you can try it.
Restart normally afterwards.
4. You can download Pacifist here:
http://www.charlessoft.com/
It will extract things from your Install disk so you
can install only what you need, in your case Image
Capture.
My Image Capture has never had a problem, so I'm
afraid all I can recommend is these general
approaches. Hope one of them helps.
Francine
Francine
Schwieder
g4 laptop Mac OS X (10.4.8)

PrintDataGrid's DataGridColumn - Embedded image not printing when you use TextFlow in the item rende

I'm printing a datagrid using something like this...
<mx:PrintDataGrid
id="printDataGrid"
width="100%"
height="100%"
showHeaders="false"
borderVisible="false"
horizontalGridLines="false"
variableRowHeight="true"
dataProvider="{titles}"
>
<mx:columns>
   <mx:DataGridColumn
    itemRenderer="renderer.TitlePrintRenderer"
    />
</mx:columns>
</mx:PrintDataGrid>
TitlePrintRenderer.mxml has s:RichText component. I use RichText's textFlow property to render the text. The approach is working fine except that if the textFlow has embedded images (<img source=... />), the images are not printed!
Is this a bug? Is it a limitation? Has anyone come across this issue?
I'm using Flex SDK 4.5.1

After struggling for 4+ days on using timer / events for printing PrintDataGrid with embedded images in RichText's textFlow, I tried your other suggestion... to convert <img> tags to InlineGraphicElement and give it Bitmap from image loaded from a .gif file. The approach works but the printout skips images in a few rows!
I've this test case in which, every time I print, it skips printing image in the second row! I also implemented this approach in a more complex test case and depending on the total number of rows, it would skip printing image in different number of rows. I'm suspecting that even if you construct InlineGraphicElement from bitmap loaded from an image, PrintDataGrid's renderer still skips printing image intermittently.
I would very much appreciate it if you could create small project from my following code and verify this behavior. I'm at my wit's end in getting this printing to work.
PrintImagesTest.mxml
=================
<?xml version="1.0" encoding="utf-8"?>
<s:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    minWidth="955" minHeight="600"
    initialize="initData();"
    viewSourceURL="srcview/index.html"
    >
    <s:layout>
        <s:VerticalLayout
            paddingLeft="20" paddingRight="20"
            paddingTop="20" paddingBottom="20"
            />
    </s:layout>
    <mx:Button
        label="Print"
        click="printClickHandler();"
        />
    <fx:Script>
        <![CDATA[
            import flash.utils.setTimeout;
            import flashx.textLayout.elements.InlineGraphicElement;
            import flashx.textLayout.elements.ParagraphElement;
            import flashx.textLayout.elements.SpanElement;
            import flashx.textLayout.elements.TextFlow;
            import mx.collections.ArrayCollection;
            import mx.printing.*;
            import mx.utils.OnDemandEventDispatcher;
            public var contentData:ArrayCollection;
            private var embeddedImages:ArrayCollection;
            private var numberOfImagesLoaded:int;
            public var printJob:FlexPrintJob;
            public var thePrintView:FormPrintView;
            public var lastPage:Boolean;
            private var textFlowNS:Namespace = new Namespace("http://ns.adobe.com/textLayout/2008");
            public function initData():void {
                contentData = new ArrayCollection();
                var page:int = 0;
                for (var z:int=0; z<20; z++)    {
                    var content:Object = new Object();
                    content.srNo = z+1;
                    content.contentText =
                    "<TextFlow whiteSpaceCollapse='preserve' xmlns='http://ns.adobe.com/textLayout/2008'>" +
                    "<span>some text</span>" +
                    "<img width='53' height='49' source='assets/images/formula.gif'/>" +
                    "</TextFlow>";
                    contentData.addItem(content);
            public function printClickHandler():void {
                convertToTextFlow();
            private function convertToTextFlow():void {
                embeddedImages = new ArrayCollection();
                numberOfImagesLoaded = 0;
                for each (var contentElement:Object in contentData) {
                    extractImageInfo(contentElement.contentText);
                if (embeddedImages.length > 0) {
                    loadImage(embeddedImages.getItemAt(0).source);
                } else {
                    printData();
            private function extractImageInfo(contentText:String):void {
                var textXml:XML = new XML(contentText);
                var imageList:XMLList = textXml.textFlowNS::img;
                for each (var img:XML in imageList) {
                    var embeddedImage:Object = new Object();
                    embeddedImage.source = String(img.@source);
                    embeddedImage.width = parseInt(img.@width);
                    embeddedImage.height = parseInt(img.@height);
                    embeddedImages.addItem(embeddedImage);
            private function loadImage(imageSource:String):void {
                var loader:Loader = new Loader();
                var urlRequest:URLRequest = new URLRequest(imageSource);
                loader.load(urlRequest);
                loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
            private function imageLoaded(e:Event):void {
                embeddedImages.getItemAt(numberOfImagesLoaded).bitmap = (Bitmap)(e.target.content);
                embeddedImages.getItemAt(numberOfImagesLoaded).width = ((Bitmap)(e.target.content)).width;
                embeddedImages.getItemAt(numberOfImagesLoaded).height = ((Bitmap)(e.target.content)).height;
                ++numberOfImagesLoaded;
                if (numberOfImagesLoaded < embeddedImages.length) {
                    loadImage(embeddedImages.getItemAt(numberOfImagesLoaded).source);
                } else {
                    // all the images have been loaded... convert to textflow
                    buildContent();
                    printData();
            private function buildContent():void {
                var contentIndex:int = 0;
                for each (var contentElement:Object in contentData) {
                    if (hasImage(contentElement.contentText)) {
                        buildTextFlow(contentElement, contentIndex);
                        ++contentIndex;
            private function buildTextFlow(content:Object, contentIndex:int):void {
                var textXml:XML = new XML(content.contentText);
                var p:ParagraphElement = new ParagraphElement();
                for each(var child:XML in textXml.children()) {
                    switch (child.localName()) {
                        case "span":
                            var span:SpanElement;
                            span = new SpanElement();
                            span.text = child;
                            span.fontSize = 10;
                            p.addChild(span);
                            break;
                        case "img":
                            var image:InlineGraphicElement;
                            image = new InlineGraphicElement();
                            image.source = embeddedImages.getItemAt(contentIndex).bitmap;
                            image.width = embeddedImages.getItemAt(contentIndex).width;
                            image.height = embeddedImages.getItemAt(contentIndex).height;
                            p.addChild(image);
                            break;
                content.textFlow = new TextFlow();
                content.textFlow.addChild(p);
            private function hasImage(contentText:String):Boolean {
                var textXml:XML = new XML(contentText);
                var imageList:XMLList = textXml.textFlowNS::img;
                if (imageList.length() > 0) {
                    return true;
                } else {
                    return false;
            private function printData():void {
                printJob = new FlexPrintJob();
                lastPage = false;
                if (printJob.start()) {
                    thePrintView = new FormPrintView();
                    addElement(thePrintView);
                    thePrintView.width=printJob.pageWidth;
                    thePrintView.height=printJob.pageHeight;
                    thePrintView.printDataGrid.dataProvider = contentData;
                    thePrintView.showPage("single");
                    if(!thePrintView.printDataGrid.validNextPage) {
                        printJob.addObject(thePrintView);
                    } else {
                        thePrintView.showPage("first");
                        printJob.addObject(thePrintView);
                        while (true) {
                            thePrintView.printDataGrid.nextPage();
                            thePrintView.showPage("last");
                            if(!thePrintView.printDataGrid.validNextPage) {
                                printJob.addObject(thePrintView);
                                break;
                            } else {
                                thePrintView.showPage("middle");
                                printJob.addObject(thePrintView);
                    removeElement(thePrintView);
                printJob.send();
        ]]>
    </fx:Script>
</s:Application>
FormPrintView.mxml
===============
<?xml version="1.0"?>
<mx:VBox
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:MyComp="myComponents.*"
    backgroundColor="#FFFFFF"
    paddingTop="50" paddingBottom="50" paddingLeft="50"
    >
    <fx:Script>
        <![CDATA[
            import mx.core.*
                public function showPage(pageType:String):void {
                    validateNow();
        ]]>
    </fx:Script>
    <mx:PrintDataGrid
        id="printDataGrid"
        width="60%"
        height="100%"
        showHeaders="false"
        borderVisible="false"
        horizontalGridLines="false"
        variableRowHeight="true"
        >
        <mx:columns>
            <mx:DataGridColumn
                itemRenderer="MyPrintRenderer"
                />
        </mx:columns>
    </mx:PrintDataGrid>
</mx:VBox>
MyPrintRenderer.mxml
=================
<?xml version="1.0" encoding="utf-8"?>
<s:MXDataGridItemRenderer
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:bslns="com.knownomy.bsl.view.component.*"
    >
    <s:layout>
        <s:VerticalLayout
            paddingLeft="5"
            paddingRight="5"
            paddingTop="3"
            paddingBottom="3"
            gap="5"
            horizontalAlign="left"
            clipAndEnableScrolling="true"
            />
    </s:layout>
    <fx:Declarations>
    </fx:Declarations>
    <s:HGroup
        width="100%"
        gap="5"
        verticalAlign="middle"
        >
        <s:Label
            text="{data.srNo}"
            color="0x000000"
            fontFamily="Verdana"
            fontSize="10"
            />
        <s:RichText
            id="title"
            width="700"
            textFlow="{myTextFlow}"
            color="0x000000"
            fontFamily="Verdana"
            fontSize="10"
            />
    </s:HGroup>
    <fx:Metadata>
    </fx:Metadata>
    <s:states>
        <s:State name="normal" />
        <s:State name="hovered" />
        <s:State name="selected" />
    </s:states>
    <fx:Script>
        <![CDATA[
            import flashx.textLayout.elements.TextFlow;
            [Bindable]
            private var myTextFlow:TextFlow;
            override public function set data(value:Object) : void {
                if (value != null) {
                    super.data = value;
                    myTextFlow = data.textFlow;
        ]]>
    </fx:Script>
</s:MXDataGridItemRenderer>

HP Deskjet 3510 Series (3512) only printing in black and yellow.

Hello.
My HP Deskjet 3510 recently ran out of ink (or so I thought.) I purchased new 61xl color and black cartridges and replaced them. However, the printer is only printing in black or yellow. I am unable to get any red, blue, or grayscale.
I have cleaned the printer heads several times, and alligned the printer several times but this has not helped the problem.
I am looking for any suggestions on what I can do to get my printer working once again.
Thank you.
Sara C.

Hello @sarajo0531 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into print output issues. I would like to help!
I'd start by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest following the steps laid out in this document:
Fixing Print Quality Problems for the HP Deskjet 3510 and Deskjet Ink Advantage 3510 e-All-in-One Pr...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have an HP Deskjet D4200 series printer that ised with my iBook G4. I would like to use it with my new MacBook Pro that I just purchased. Is there anyway to do this? When I try to install the driver using the CD, I get the message, "can not open the

I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top. When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported. I am not sure what all that means but is there any way to use this printer with my new computer?
Thanks

It would help to post this in a more proper form. This is for the iTunes family of stores.

• Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

have never been able to install imaging null print update on my destop on win 7/8/8.1 and now update appears on win 10 to update and again failure. Get error message:• Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

Hello , and welcome to the HP Forums! I see you're having issues with an update. I would like to help! I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor. Once the Doctor has been run, re-run the update. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

I lost my printer installation cd of my deskjet 3520 series

I cannot find my cd for my HP Deskjet printer 3520 series. I have manually plugged it in from the printer to my USB laptop, and then followed directions and also the test page came out okay. Then it said to finish insert the cd disk to complete installation....I do not have it, I lost it....How do I get another one? I have updates that windows is trying to do on the printer and it fails. Below is a copy of one of many fails.
Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series
Installation date: ‎12/‎27/‎2014 12:21 AM
Installation status: Failed
Error details: Code 80070490
Update type: Recommended
Hewlett-Packard Imaging software update released in November, 2009
More information:
http://sysdev.microsoft.com/support/default.aspx
Help and Support:
http://support.microsoft.com/select/?target=hub
HELP?

Hello impulsive57,
Please try the below steps that should help you install the latest available drivers for your printer.
- Restart the PC
- Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Reverse & Print Image from iPhoto?

How do I reverse/flip an image and print it from iPhoto?
I tried another way as well....I have been able to save to desktop from iphoto....view in Preview & flip that image using Preview Tools, but I am unable to print the reversed image from Preview.
So, the ultimately question remains...*Can you reverse an image in iPhoto and print it?*
Thanks!

Below is the thread you suggested that I follow. I was able to set Preview as the external editor, flip the image and save it to iPhoto. The image is now correct when I view it from iPhoto. However, when I try to print the edited image, which is still under the preview option, it pulls the original image from iPhoto.
How do I print the edited version of the image?
Thanks!
"The easiest way to do this is in the Tools menu in Preview. You can set Preview as an external editor, or use an image editor for the job.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway."

Deskjet 3800 series Image reversed print when shared over IP XP Host Vista client

Similar Messages

Maybe you are looking for