Deskjet 5440 makes bell sound

Hi, since yesterday, I cannot print, my printer just makes this high pitched bell sound can you help me anyone? Thanks Nathalie

Hello there! Welcome to the forums @recupefashion ,
I understand you cannot print and your printer is making noises. I would suggest checking to see if the carriage could be stuck?
Click here and try these steps and let me know how you make out:
The Carriage is Stuck for HP Deskjet 5420v, 5440, and 5940 Printers
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

My printer make a hard (crash?) sound when being operated. HP Deskjet 5440.

Dear All,
My printer make a hard (crash?) sound when being operated. How to fix it? The printer is HP Deskjet 5440.
Thank you

Does the carriage (the part that holds the print cartrdiges) bang into the sides of the printer? If so then cleaning the encoder strip as described in this post may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Since the iOS 7 update, some apps no longer have sound, even of configured to do so. Example, no longer does my FaceTime ring even if I have a tone set; my email app doesn't make a sound when email comes in or goes out. Help!

Ever since I updated to ios7, sounds from specific apps has disappeared, even if configured correctly to make sounds. My mail doesn't sound off anymore when mail comes in or goes out. My FaceTime no longer rings when someone calls me. My map app no longer gives me voice instructions like it did before. If someone messages me I do not hear sounds anymore. I find it very annoying especially because I have family abroad and FaceTime is an important means of communication. I reset it by pressing the sleep and home button and all, nothing happened.
Can someone help understand how to resolve this problem.
Thank you so very much.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Make sure sound is not muted in Control Center; tap on the little bell. Swipe upwards from bottom of screen to launch Control Center

IPad Air alarm makes no sound

We set an alarm at 4:30AM for a flight. The alarm made no sound and we slept late. It seems none of the ringtones make any sound but only show the alarm message on the lock screen. I have verified that the sound was set to full volume. The alerts setting page also does not make any sound when tapping on an alert tone for a preview.

I had no alarm sound on my ipad (os7) and tried several of the suggestions here. Problem was several things conspiring to confuse.
First, the mute bell on the alarm is independent of the ipad volume control, so it can be (and was) muted when the ipad was at full volume. Look carefully at what the prompt with the bell icon says when you touch it . . . It is muted when grayed out, not when bold . . . Confusing BC both cases show a hashed (muted?) bell symbol.
Once I figured this out, I discovered that the alarm sounds and volume are controlled via the SETTINGS app. It was set to zero volume. To confuse further, this volume can be linked to the ipad volume control (or not) with a switch below the volume slider. If you choose to link to your volume control, then all bets are off since you won't remember whether you last muted your YouTube/iTunes/whatever before going to sleep. In plain language, don't choose to link alarm volume with ipad volume.
I think this explains some complaints about "random" instances of no alarm sound. They are probably self-inflicted and inadvertent.

My iPhone 5c ... The sound is goofy. I have the classic Bell sound for my text messages but the phone no longer dings. Can anyone help me?

Some of my sounds do not work. I have the classic bell sound for my text messages but when someone sends me a text message it doesn't make a noise anymore. Does anyone have any ideas on what's wrong? It seems that it stopped working ever since I upgraded to the latest iOS system

Hey Grose1946,
Thanks for the question. I understand that you are experiencing issues with sound on your iPhone 5c. The following resource may provide a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
http://support.apple.com/en-us/HT203794
Thanks,
Matt M.

Random 3-tone bell sound like in an airplane cabin

Just got a new iMac today, and every 5-20 minutes it randomly makes a 3 tone bell sound, like you would hear in an airplane cabin or something. It's not coming from any webpages I'm on. What's causing this noise?

Hi Matt
That should not be happing, three tones normally indicates a problem with the RAM.
You might run the Apple Hardware Test to test the RAM, but to be honest I would take it back.
http://support.apple.com/kb/HT1509
Keep in mind that you have 15 days to return an off the shelf iMac for a full refund no question asked.
Dennis

I can not print web pages with my HP Deskjet 5440

I can not print web pages with my HP Deskjet 5440. I use Vista, no error page, just prints a blank page with headers and footers. Recently reinstalled printer driver from HP.

Hello , Welcome to the HP Support Forums!
I understand that since upgrading your Mac OS X 10.10 computer to Mac OS X 10.10.4 you have been unable to print colour photos wirelessly from your HP Officejet 5740 e-All-in-One Printer. I would like to assist you today with resolving this colour printing issue. To be honest, it does sound like Mac may have loaded the generic Apple Airprint driver on your printer rather then the HP Full Feature Software and Driver package. Should this be the case then you will only have basic print capabilities. Please follow the steps below to confirm that your HP Officejet is utilising the correct driver on your Mac.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint driver.
  6. Click Add to add the printer to the list.  Once your printer has been installed with the correct HP driver, please test printing a colour photo to confirm that the issue has been resolved. Please respond to this post with the result of your troubleshooting. Should the issue persist there are additional software and driver troubleshooting steps I will have you perform. I look forward to hearing from you!

Deskjet 5440 problem

I have Deskjet 5440 which used to work properly with my old Win XP machine. I now have a Dell Studio 1555 laptop with Win 7 64-bit version. (I also have an older HP desktop with Win 7 that I want to use with this printer) The printer does show up under Printer & Devices but it is called "HP Deskjet 5400 Series".
When I send a print job to this printer, it will sit in the queue for a while, the printer will go off-line and then a printer error shows up. If I run the Win 7 Troubleshooter, it does not solve the problem. In the Troubleshooter I have tried
to make this printer my default, no success
to turn it off and on, no success
I do have the original installation CD, but I have not used it on the Win 7 laptop. So far nothing will print, not even the Test page.
Can anyone help?
Thanks!

Try the driver on this page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4454...

New ink cartridge alignment test Deskjet 5440

I got a new computer and plugged in my old Deskjet 5440. I downloaded and installed the recommended driver from the HP support website. I then replaced the color and black ink cartridges. On my last computer when I changed cartridges I was asked if I wanted to align them. This time (twice) I was not.
How do I run an alignment test?

Hi @KroebY,
Welcome to the HP support Forums! I see you have replaced the black cartridge on your HP Deskjet 1010, but it is not registering the new cartridge. You are unable to copy or print, you can make a scan. I notice you said your DJ 1010 was not compatible with the Windows 8.1 Operating system, there are full feature software and drivers available for your printer.
Let's start troubleshooting the print quality issues: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
Does this help, are you now able to print and make a copy? If yes, continue below:
Now, the software:
1. Unplug the USB if using a direct connection.
2. Remove the HP DJ 1010 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the DJ 1010 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your DJ 1010 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-117518-4&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if you are not able to print, and if the installation was successful. I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

A tiny little cry for help: mic in bootcamp makes me sound like a mouse!

I posted this on the InsanelyMac forum, and I thought I'd post it here too because I'm just that desperate for help... thanks in advance for reading.
I run a MacBook Pro Core 2 Duo. When Snow Leopard came out I installed it and partitioned my drive to allow me to run Windows via bootcamp for the purpose of playing Aion with my husband.
The game works fine, although it only works correctly when I'm hooked to my large Dell monitor. The built-in display makes the mouse/cursor not function correctly in-game.
But that's relatively minor... the biggest problem is that the built-in mic, as well as any mic I plug into the Line In, makes me sound like a mouse when I speak. I SO don't want to be known as the squeaky mouse over ventrilo. (The problem occurs in a regular sound recorder too, so it is NOT ventrilo specific).
The audio device is listed as Intel High Definition Audio: Device ID 0x83847680, Audio ID 30 - whatever that means.
When I dive into the Control Panel audio preferences when booted into Windows, the driver is listed as IDT audio.
Audio output seems to function perfectly.
I would sure appreciate help if anyone has expertise or experience with this sort of thing. I'm at a little bit of a loss.
TIA,
Jen

Hey, I had a thought, I don't know if it'll work and won't get the chance to find out until later tonight if I'm not too tired or until later tomorrow.
I think that if the IDT drivers aren't installed in the first place, perhaps the issue can be averted entirely. However, it's going to take a bit of knowledge to do and some patience. The partition will need to be remade entirely so that one may end up with a fresh operating system. When the SL disk is put into the computer, instead of running the full driver setup, pick the drivers directly off the disk by exploring its folders and only install the ones you need. Instead of using the IDT drivers, I believe the SL disk also has Realtek HD audio drivers (if I remember correctly from the last time I looked). My thought is that this manual method can prevent having to deal with the IDT drivers which I believe are part of the issue.
I understand that reinstalling XP is a process in itself, but this is the only solution I can think of. If manually installing doesnt work, my next move would be to use the drivers that come off the Leopard disk instead of the SL disk.
Like I said, this is just a thought I have so when I get to it later I'll let you know how it goes unless you decide to give it a try before me.

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4)

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text?

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text? Even if my ringer is set to high, I don't want it to make a sound when it sends my texts..can anyone help?

Flip the Ring/Silent switch.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

HELP NEEDED! My wife's 5c won't recognise on my laptop anymore. I plug it in and the laptop makes a sound but won't show up the phone. I only recently discovered this problem when I upgraded. It will recognise my 5c and even the iPad but not her 5c

I discovered this problem when I upgraded my iPhone 4 to a 5c.
My laptop will recognise my 5c and even the wife's iPad but won't recognuse her 5c, when I plug it in it makes a sound but just doesn't show up in iTunes.
It DID work on my laptop as recently as November when I backed up her phone and updated her software but like I say ever since I upgraded it just won't recognise her 5c but does mine.
I just can't think what is wrong? I haven't messed around with anything on the laptop or messed around with the wife's settings on her 5c
HELP!!!!

I would test with another computer and another cable
if it the device would not be detected by any computer I
would say that it's connector was broken

Deskjet 5440 makes bell sound

Similar Messages

Maybe you are looking for