Deskjet 6127 -- All the lights are blinking; can't turn it off. Cartridges are stuck.

Has anyone had this problem? I have a Deskjet 6127, all the lights are blinking. I can't turn it off. If I unplug it and plug it back in, (which is what it says to do on the troubleshooting site) the lights continue to blink. The ink cartridges won't slide out. Any suggestions on saving this printer from impending doom?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

TS3694 I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.

How do I turn off I pod touch?   The restore screen is stuck

Thanks for the assistance. I was able to restore my I pod after letting the battery run down. I then synced the I pod to my new computer. Most of the songs moved from the cloud to the actual I pod drive. But, many of them did not. I tried downloading them from the cloud on my I pod, but this didn’t work. Will I be able to restore the missing songs? Thanks, Cleveland.
Sent from Windows Mail
From: Apple Support Communities Updates
Sent: Sunday, November 9, 2014 4:52 PM
To: shircleve
You received a reply
lllaass has replied to your question. You can view the full discussion in Apple Support Communities.
I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Correct Answer Helpful Answer
Use the buttons above to tell lllaass and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to lllaass, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

How do you shut off the apps that are running? Before the update you hit the button twice then it would showing all the apps and u can then shut them off.

How do you shut off the apps? Before update I just hit the side button twice then it would show all the apps. Then I would shut them off.

http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
View running apps.
Double-click the Home button to reveal the multitasking display. Swipe left
or right to see more. To switch to another app, tap it.
Quit an app.
If an app isn’t working properly, you can force it to quit. Drag the app up from the
multitasking display. Then try opening the app again

All sounds re-directed to the bluetooth headset. Can I turn if off?

I have noticed that when I have a bluetooth device on & connected, all sounds (except phone ringer) are re-directed to the bluetooth device; so unless I have the bluetooth device in my ear I miss all notifications.
Is there a way to change this (other than not using a bluetooth of course)?
Any help would be much appreciated.

I have it paired to use the phone, but don't keep it plugged in my ear all the time, so when text of mail comes in all I get is vibration that I often don't feel.

N95 turn flash light on,and can't turn it off- Pro...

Hi, I have N95-1 firmware v21.0.016. I didn’t decide yet to update new v30, because some reviews I thought that it’s better to skip this and wait next.
The problem I experience with my device is that some time (it’s happened few times) in ordinary use (not camera use), my flash light (camera light) turn on and wont turn off even if I turn phone off. I tried removing the battery and the light goes off. As soon I put the battery back in the light comes on again even phone is still off. When I turn camera on (by opening it), light go off but when I close it it’s turn on again. I find solution, to take any picture, and after that everything goes back to normal.
Does any one else had experience like mine? What can provoke this behavior?
Solved!
Go to Solution.

First thanks for response.
Rrangel, thanks for advice, but I can turn my flash off. It simple, taking picture (and that is the only way for that) and after that everything go in normal. I can close camera and continue to use my phone normally (no flash light on). I can turn phone off and on again, it’s will work normally and no flash light problem. However, this might happened again.
I have 4 GB takems memo card in the phone. And phone wasn’t in contact with water or steam, it never fall or had any defect.
First I thought it’s because some third part application. When it’s happened first time, phone was running Rotate Me, Flip Silent (that I was just installed and test how it’s will work), Advanced Call Manager, and I was rejecting some phone call. I thought it’s because Flip Silent, but second time, phone didn’t run any of those applications, I was just change theme and flash light turn on.
First time I find out that, removing battery and restarting of the phone will not help, so I simply take picture, like first time (delete picture immediate after), and continue to use phone normally. I’m just confused what the reason is?

Black line texture map over the texture. How can I turn this off?

I have recently been editing textures from 3D models, but when I open the texture, black lines appear on my screen, displaying a texture map over the actual texture. This is not a layer, or something I can turn off in Window settings, and resetting my Photoshop settings does not help (Photoshop CC).
Is there a way to turn this off as it is interfering with what I am trying to do greatly.

System Preferences > Universal Access > Seeing > Uncheck Voiceover, or any of the options on that page.
Edit: Sorry, read your OP wrong.
However the solution is likely to be in universal access, so take a look through there, and you'll most likely find the solution.

Firefox is running in the background and I can't turn it off.

When I go to a site I can hear talking and music in the background. This happens when I'm not even using firefox. I tried to remove a tool bar I have and it said I had to close firefox. I can hear it when I check e-mail. Help!!!

I have tried your suggestions and FX still won't open. Things I have tried are ending FX processes, restarting, removing "parent lock" from the FX profile - still no luck. Any further ideas? Thanks.

Firefox is running in the back ground, how can I turn it off to reinstall it?

I tried to get into the save mode but Firefox still will not come up. I have uninstalled the program and reinstalled and still I can not get Firefox to come up on the screen. But when I shut down my computer it says it is running. It must e running the back ground. Please help me get Firefox working again. I think this is a Mozilla Problem because I did not install addons, etc.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

In Piano Roll, double click on note opens List editor. CAN I TURN THIS OFF?

While editing in the Piano Roll Editor, double clicking on a note opens up the List Editor.
CAN I TURN THIS OFF?

I realize that it is my way of working that causes the editor to open up. When I work fast and with the zoom out a little to far, some times when trying to move a note it fails to move and when I try to move it again the List Editor opens up. I am very set in my ways after 20 years of non linear and 30 years of midi programming. I was just surprised that this is not a preference.
I really don't want to slow down my double click settings. I like them fast to avoid this very thing, false double clicking. Maybe I'll try making them faster.
Does anyone know where the support Feedback is located? I would love to request another pref be added.
Message was edited by: Blearyeyes

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Hi Everyone. I have an old Mac Book. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive?Pls.help.

Hi Everyone. I have an old Mac Book with software updated to 10.6.8. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive? Pls.help. Tks.

Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing!

I have an error message B851FE84, all the lights are flashing the only way to stop is disconnect poe

all the lights are flashing the only way to stop is disconnect power cord this even happens when power button is off

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My network, based on modem, wifi router (Airport Extreme),Time Capsule and Airport Express simply disconnects with all the lights green on the modem and Extreme, but the other components offline, 5 or so times per day. I suspect the Extreme.

I have a Cisco System3 modem, feeding an Airport Extreme, which connects wirelessly a Timecapsules and an Airport Express both of which extend the network, ie send out more WiFi signal. The system worked well for a long time, say a year and a half and then it started dropping out. All the lights on the modem and airport Extreme stay green, but the other two components are blinking yellow. I've tried limiting the channels, but there are few sources in my neighborhood. I have tried resetting the Extreme which worked for a week and now it's back to its random disconnect behavior. I have read some of these blogs and no one seems to know what to do, especially not Apple. Do I just get another router or what? What do I lose if I use a non Apple router and what would you suggest?

Welcome to the discussion area, Junkcanoe!
I don't have a setup like yours, but might be able to offer some assistance.
Basically I have two jacks, a TC and an AE and I'd like to create a roaming network. Both of them are set to bridge mode with the same SSID, WPA2 security, same password, etc.
This would be the normal way to set up a roaming network, but the wild card here is that we don't know anything about how the main router that supplies the ethernet connections (valid IP addresses) to the condos might be configured.
For example, most apartments, hotels, etc that provide ethernet jacks usually limit the number of devices that can connect to each jack. Hotels tend to limit this to one or two devices. I counted six devices that you say will work properly plus a few more. Since you have two separate ethernet jacks, you may be looking at a situation where each jack is allocated a total of 4 devices, or valid IP addresses.
The bottom line here is that we won't be able to make much progress until we know more how the main router there has been configured. Is it possible for you to ask the complex manager (who will probably need to ask the IT guy) how many devices are allowed to connect per ethernet jack? Another way to ask the same question is how may valid IP addresses will each ethernet jack allow?
If you can, could I ask you to perform an experiment? Rather than have both the AirPort Extreme and Time Capsule each connect to a separate ethernet jack, can you temporarily move one device near the other and connect them together using an ethernet cable? (Or, use a long ethernet cable if you don't want to move either device) LAN <-> port on one to LAN <-> port on the other. In other words, you'll only be using one of the ethernet ports in the condo for this experiment.
Any difference in performance or number of devices allowed to connect?
Message was edited by: Bob Timmons

HT204053 iCloud in a business. Do all the computers require the same apple ID to share all the files?? Can i have two apple accounts on one device?

iCloud in a business.
Do all the computers require the same apple ID to share all the files?? Can i have two apple accounts on one device

Neither of those Apps allow you to (easily) add iWork documents created or edited on the device to your online storage, you need to be using a webDAV server to be able to do that. In fact pretty much all you can add from the iOS device is photos and video without resorting to convoluted workarounds, intermediate apps or emailing finished documents to yourself. You can on the other hand view most of the content of dropbox/sugarsync through those apps, which in a lot of circumstances is useful, but without it working in both directions these apps are far from an ideal solution.
E.g from the sugarsync website
Yes, this may not be of too much interest to the OP, I was only trying to clarify the situation with iCloud.com/iWork for you.
However that being said, there may be areas of interest for Computer to Computer syncing, given the recent changes made to iCloud.com/iWork. I wouldn't suggest iCloud sharing for archived documents, but for perhaps up to a couple of dozen documents in progress, iCloud sharing is now quite viable. If there is any chance at all of these documents being accessed on an iOS device then iCloud would become a preferred option to dropbox or sugarsync.

Deskjet 6127 -- All the lights are blinking; can't turn it off. Cartridges are stuck.

Similar Messages

Maybe you are looking for