Deskjet 720 - Patch for 32 bit Windows 7 Ultimate

Buenas tardes, estoy teniendo problemas con la instalación de la impresora 720c en Windows 7 Ultimate (32 bits) ya que no aparece dentro de las opciones de instalación. Alguien podría indicarme que es lo que tengo que hacer?. Mil gracias.

Buen día. En la parte inferior de este post será un enlace al sitio españoles sobre problemas de instalación de la impresora. Esto expondrá su mensaje a los miembros de la comunidad que será capaz de responder a su pregunta. Estoy utilizando traslate Google para proporcionar esta información. El siguiente enlace le dará un enlace directo con el foro que usted necesita.
http://h30467.www3.hp.com/t5/Instalaci%C3%B3n-y-configuraci%C3%B3n/bd-p/Instalacion
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

Deskjet 720 driver for windows 10

Yes,Yes, I know it is an old printer (only 15 years old) but I use it strictly to print Quckbook checks. Up graded to Windows 10 and there is no driver that works. Tried to patch with the Windows 7 64 bit patch file but Win 10 did not like that. Any work arounds would be appreciated. Thanks!

Hi, Please check the following article: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Will-my-HP-Printer-work-with-Windows-10/m-p/5169746 Regards.

How do you install the JDBC-OCI patch for a Windows NT4 IFS Installation?

I am about to install IFS on a Windows NT4 Server. I dont understand the instructions for installing the JDBC-OCI patch.
How do you install the JDBC-OCI drivers?
Do I install them after installing Oracle 8.1.6? and before installing IFS?
Is it necessary to install them?
I would be grateful for as much help as possible, I have never done anything like this before.
[email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jaikishan Tada, Oracle Support:
Before installing iFS, you need to install
Oracle8i Client (with Administrator option).
This installs JDBC-OCI driver and other
common Oracle components such as Net8,
OEM ....
The JDBC-OCI driver patch is available from
technet to download. Go to the url - http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
and download Oracle8i 8.1.6.0.1 JDBC Drivers for use with JDK 1.1.x.
Apply the patch and carry out iFS installation/configuration.
Go through the iFS installation guide.
Good Luck,<HR></BLOCKQUOTE>
null

Location of upgrade patch for VMS windows support for IPSv.5

Anybody know where I can download the fcs-IPSMDC-v2.1-w2k-readme.exe?
The site http://www.cisco.com/cgi-bin/tablebuild.pl/mgmt-ctr-ids-app only view the fcs-IPSMDC-v2.1-w2k-readme.pdf file and no *.exe file. I am to upgrade my VMS to support IPS..
Hope someone could help me.

At the top of the download page it states:
NOTE:
For IPS MC 2.1 please proceed to the VMS blind rev page and download the appropriate VMS 2.3 bundle installer (Windows or Solaris) and then apply Service Pack 1 from this page.
The "VMS blind rev" page reference is a link to the correct place on CCO. So follow the link to download the VMS 2.3 components (includes IDSMC 2.1 files inside it).

ThinkVantage System Update Patch for Microsoft Windows Vista Service Pack 2

FYI:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758&selectarea=SUPPORT&tempsel...

Small warning: This too is contains a flaw and doesn't install on certain systems.
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&view=by_date_ascendin...

How to Install Grid control for 10g (WINDOWS)

Dear All,
This is the first time i am going to test on Grid control. i have lot of droughts from the beginning...
what is the first step to install, database or grid control tool.(*Windows*)
i am downloading the below software from e-delivery
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 1 of 2) V15628-01 Part 1 of 2 1.1G
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 2 of 2) V15628-01 Part 2 of 2 1.1G
Is the above software containing _10g database alone_, or its with Grid control, if its with grid control kindly let me know how to install ,, kindly don't give me oracle documents. please explain me int his blog itself or some different blogs.
Any one explain me what is the step i have to take after this,, ??
Thanks
Abdull
Edited by: user9111553 on Nov 23, 2010 12:01 AM

Hi Miguel,
Could you help me? Full and base version of what?
For instance, i have Oracle 10.2.0.4 version and did not check EM during instalation oracle sw. So what is the first step to install and configure Grid Control? i downloaded Grid Control and read readme file. There is information that i need to install OEM and then Grid Control. did i understand right way or misunderstood? could you show me steps for implement Grid Control with 10g on Windows?
regards and thanks,
rustam

Patch for dbxml-2.5.16\dbxml\src\perl\build.bat to make it work better!

Hi folks at Oracle,
please consider accepting this patch for the Windows Perl module build script into your distribution of Berkeley DB XML:
--- build.bat.orig      2009-12-22 14:17:00.000000000 +0100
+++ build.bat   2010-03-01 02:38:26.859375000 +0100
@@ -6,46 +6,54 @@
:: "noinstall" installation is not done
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\vsvars32.bat" && goto BATFOUND1
+:: Avoid hard-coded paths like "C:\Program Files\Microsoft ...".
+:: In another locale, the path is different: "C:\Programme\Microsoft ...".
+:: Use the appropriate environment variables instead.
+:: There is %ProgramFiles% for the program folder.
+:: There are dedicated variables for Visual Studio.
+:: These are by far the best bets here.
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET\Common7\Tools\vsvars32.bat" && goto BATFOUND2
+call :TryBat "%VS90COMNTOOLS%\vsvars32.bat" && goto VS90
-call :TryBat "c:\Program Files\Microsoft Visual Studio.NET\Common7\Tools\vsvars32.bat" && goto BATFOUND3
+call :TryBat "%VS80COMNTOOLS%\vsvars32.bat" && goto VS80
-call :TryBat "c:\Program Files\Microsoft Visual Studio 8\Common7\Tools\vsvars32.bat" && goto BATFOUND4
+call :TryBat "%VS70COMNTOOLS%\vsvars32.bat" && goto VS70
goto BATNOTFOUND
-:BATFOUND1
-echo Using Visual Studio .NET 2003
+:VS90
+echo Using Visual Studio 2008, VS9
goto BATFOUND
-:BATFOUND2
-echo Using Visual Studio .NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS80
+echo Using Visual Studio 2005, VS8
goto BATFOUND
-:BATFOUND3
-echo Using Visual Studio.NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
-goto BATFOUND
-:BATFOUND4
-echo Using Visual Studio 2005
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS70
+echo Using Visual Studio 2003, VS7
goto BATFOUND
:BATFOUND
+echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
:: Use the correct line, depending on whether you are building
:: release or debug
:: perl Makefile.PL -config config.win32d >> winbld.out
:: perl Makefile.PL prefix=../../../perl -config config.win32 >> winbld.out
-perl Makefile.PL -config config.win32 >> winbld.out
+
+IF EXIST ..\..\..\bin\debug\libdbxml25d.dll (
+    perl Makefile.PL -config config.win32d >> winbld.out
+) ELSE (
+    perl Makefile.PL -config config.win32 >> winbld.out
+)
+
nmake >> winbld.out
nmake ppd >> winbld.out
if /I [%1] NEQ [noinstall] (
+    echo installing modules, info in logfile winbld.out
     nmake install >> winbld.out
+) else (
+    echo not installing modules as requested
goto ENDIt'll make installation success more likely for international users, and also for English users. Also, at the end of the process, the user is informed where he can go looking for what the installation process has been doing. Plus, the script tries to figure out on its own whether to use the debug config or the straight config.
The build has been successful for as much as I can say now:
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::DbXml::VERSION"
2.0050016
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::Db::VERSION"
4.008026Michael Ludwig

Hi Michael,
Thanks for the patch! We'll take a look at that and try to improve the Perl installation in the next release.
John

Patch for alert 1203/0 IP Fragment Overwrite

I was unable to find the patches for the alert 1203/0 IP Fragment Overwrite.
When i go to the site "Microsoft IP Fragment Reassembly Patches".
I was unable to find patch for the Windows XP. If i go to the Windows NT4.0 Workstation i found out that the page cannot be found as well.
I need patch for Windows XP fof alert 1203/0 IP fragment Overwrite.Kindly assist on this please anyone.

The signature fires because traffic matching what it detects is seen.
The vulnerability was disclosed prior to winXP releasing, winXP is not vulnerable to this.
Why 2 winXP endpoints are sending traffic that triggers the signature - don't know - we'd have to look at the traffic that is being passed and match that to the alert that's firing. If you feel that this there is a false positive, I ask that you capture traffic and provide the alert that fires during that capture and either open a TAC case, or submit it here:
http://tools.cisco.com/security/center/ipshome.x?i=12&shortna=ContactUS#ContactUS

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

Hp deskjet 5940 drivers for windows xp 32 bit

hello!
who can help me find a driver for windows xp 32 bit for my hp deskjet 5940?? the drivers that you download from hp website is for xp 64 bit!
thanks
Ans

thanks for your help!
I tried this but it does not work for my windows xp 32 bit!
I have tried many a driver but I can not find anyone!
I do not know what to do ...

OAS 10.1.3.5 on Windows 64 bit, NO CPU patch for April?

After reading the CPU Advisory for April CPU 2011, it appears that for OAS 10.1.3.5 on Windows 64 bit, that there is NO CPU patch for April? It only shows a patch for Windows 32 bit. They do not mean that the 32 bit patch should also be applied on 64 bit Windows o/s having OAS 10.1.3.5? I just want to make sure I skip this CPU since I have 64 bit o/s.
I ask because the list of bugs fixed in the README for the 32 bit patch list 32 bit bug fixes , and then 64 bit bug fixes.
Edited by: user12152237 on May 9, 2011 6:17 PM

Somu, please check a topic 3 lines below. No, there's not a separate 64-bit installer, but there's a work-around albeit not supported by oracle.

I have just purchased my first MacBook Pro and it is pretty fantastic. I own the disks for Microsoft Windows 7 ultimate, and Office 2010 Professional Plus, and need to run them in this Mac. 32 bit discs. Can this happen in boot camp?

I am trying to run Windows and Mac OS on my brand new MacBook Pro. I need to be able to boot to either one. I don't need a lot of hard drive space for the Windows OS. However, the software discs I own for Windows are 32 bit install. Is there a way to run this with what I have? I have the new MacBook 13 in. with retina display. 2.6Ghz i5 with 8GB RAM and 512 GB PCIe Hard drive.

yorkeystyl wrote:
Hi guys! I have a new Macbook Pro purchased from Best Buy yesterday. I had the Geek Squad upgrade the RAM to 8 gigs (They only had PNY brand, I was concerned but went with it anyway). I had them install Boot Camp Windows 7 Ultimate. Today I picked it up and when I started playing with it I learned that they installed the 32 bit version of Win 7 Ultimate instead of the 64 bit version, why, I have NO IDEA.
So, I want to replace the Win 7 installation with the 64 bit version but have read that this can be tricky. What is the proper way to do this? I'm not sure I trust the Geek Squad to do this for me.
I assume I need to reformat the Windows partition, defragment and then install the 64 bit version of Win 7 Ultimate, but am not completely sure. I want to be sure that I do NOT do anything that could affect the Mac side
What do you guys think?
I think you should take it back to the Geeks and tell them what you want, I also think you should backup before you do.
You do not need to reformat or repartition, you need to reinstall Windows from a 64bit copy, 32 & 64 have identical requirements as far as partition and format go, defragmenting has nothing at all to do with your needs.

Latest patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit)

Hello everyone,
Can any body let me know what is the latest CPU and PSU patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit).
I found this patch 16042647 i don't no either it's CPU or PSU.
Re: Patch 16042647: Oracle Database Family 11.2.0.3.0 for Microsoft Windows (32-bit) - ORACLE 11G 11.2.0.3 PATCH 15 BUG FOR WINDOWS 32 BIT
Thanks

In readme file i found this that why i am confused.
Table 1 Installation Types and CPU Applicability
Installation Type Latest CPU with Security Fixes
Server homes CPUJan2013
Client-Only Installations CPUOct2012
Instant Client Installations None
(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.)

Patch Set Release 2 (9.2.0.8) Patch Set 7 for Microsoft Windows (32-Bit)

Hi,
I've 2 nodes with version 9.2.0.1
I applied a Patch Set Release 2 (9.2.0.8) Patch Set 7 for Microsoft Windows (32-Bit) on the Node 2,
All is fine but when i try to discover N2 from N1 with OMS, i get only the HTTP Servers, and no database discovred,
For your information, I've 2 databases on N2
Please help me to resolve this probleme because i need to schedule some jobs.
Regards.

Check where you installed the 9.2.0.8 patch, in the database home or Enterprise Manager Agent's home?
Check the compatibility between the versions of agent, database and OEM.
Try to reinstall the (correct version) agent again in Node 1.
If you have 2 database on Node 2, if they both uses the same Oracle database version and same home, you need to install the patch only once, but got to run the upgrade and catpatch.sql seperately in each databases.
Hope it helps,
Babu Rangasamy

Deskjet 5150 driver for Windows 7 (64 bit)

I have recently added a new laptop with Windows 7 (64 bit) to a small home network and want to be able to use the existing Deskjet 5150 printer. The printer is attached to a desktop that has Windows XP. How can I get a driver for the windows 7, so that I can also print from the laptop via the network?
This question was solved.
View Solution.

Try the following: on the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the Hewlett-Packard HP Deskjet 5150 series.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Deskjet 720 - Patch for 32 bit Windows 7 Ultimate

Similar Messages

Maybe you are looking for