DeskJet 932C and Win 7 installation problems

I recently upgraded my Win XP system to Win 7.  In so doing I first re-formatted the XP system in order to correct problems with it before upgrading.  Now I cannot get Win 7 to find the driver.  It recognizes that the printer is connected but that there is a problem.  I tried inserting the original CD but it won't recognize that either.  I have read all the "solutions" on the HP pages and none of them work.
I know the 932 is compatible with Win 7 because it is working fine on my laptop which runs Win 7.  How can I get the system to recognize and download the driver?

Thanks for the suggestions Dave,
I found a solution
       The DVD I was using worked on HP NC2400, no problems, I found another OEM DVD with 64 Bit Windows 7 and it installed flawlessy.
                  Thanks again Dave
                                              Slan / Ed

Similar Messages

  • Big pool of ink in back right corner of Deskjet 932C, and now leaking out of bottom

    this is the 2nd printer that this has happened to..........a big pool of ink in back right corner of Deskjet 932C, and now leaking out of bottom, any one else?

    I am getting this on an HP 940c.  Checked inside and found big globs of ink under location where ink cartridges settle when printer is off.  Currently printer is printing fine.  Current ink cartridges do not seem to be leaking or messy or smeared.  Hope someone has some advice on this.

  • Msi k7t266 pro-RU Spontaneous Restart and win xp install problems

    i have the following system:
    athlon 1200ghz cpu with thermaltake cooler
    msi k7t266 pro ru ver 2 bios ver3.7
    nvidia geforce 2 mx400 64mb vcard
    1x 128 ddr pc1600
    1x 256 ddr pc1600
    1x maxtor 7200 rpm 30gb HDD (master)
    1x maxtor 5400 rpm 30gb HDD (slave)
    1x cd-rom
    1x cd-writer
    1 conexant pci modem
    1 lan card
    1 casing fan
    1 chipset fan
    i have the following problems:
    1. i formatted my HDD in my other desktop and installed it in my msi system. i booted from the cd and installed winxp. after installation in windows i proceeded to install updated drivers and such. after installing drivers and win xp sp1 but before being able to install office xp, my pc restarted and its own and when it rebooted i got this messsage: cannot start windows. c:windowssystem32configsystem is corrupted. i was not able to start windows again after this.
    2. after the above problem, i proceeded to attemp to install win xp again. i wasnt succesful because i always get a message saying cannot copy whatever.dll file all the time. so the installation wont continue.
    i hope u can all help me. i feel that the win xp cd might be busted, but then again i am also concerned about problem #1 above. i feel that if i can install windows again i will have the same "spontanous restart" incident that first started and caused (i think) probelm #2
    pls help.
    thanks
    Anton ;(

    Hi!
    Really, I don't think this could be a hardware problem since WinXp takes more than few minutes to install, and you did it, then you installed drivers and SP1. Why did you format HD in the other PC ? I would try a new install, taking out all not necesary stuff, leaving only CPU, memory and video card and formatting again the HD. for a clean install; then go adding the other hardware one by one, installing it's drivers and rebooting each time. Finally before connecting to internet enable Firewall to prevent Blaster Worm ( Don't know if still is going around ). One thing: Be sure HD is well connected and configured: Master if is a slave conected to same wire..etc.- If again you get an error, I would look for a faulty HD.  8)

  • Win 7 and Win XP Printing Problem

    I currently have a HP LaserJet 1320 printer connected to a desktop computer running Windows 7 (64-bit).  I also have a notebook running Windows 7 (32- bit).
    These two computers are set up in a Home Group and the LaserJet prints on both of these computers with no problems.
    I also have two additional notebooks running windows XP. These two computers are set up in a network along with the other two but cannot print from the LaserJet printer.
    I have tried everything I know to do and cannot solve this problem.

    Hello Alisononthego,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Laserjet 4250 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hard drive upgrade and Win 7 installation on MacBook Pro

    I am planning on installing Win7 on my MacBook Pro using bootcamp. I also plan on installing a new 500 gig HD. I also have a new unformated external hard drive I plan to use a a backup drive for both the mac OS and The Win7 OS. What is the most efficient way to accomplish these tasks? Since this is my first Mac exposure I am not exactly sure what order I perform these tasks. I am fairly familar with The MS OS family having used the OS since the DOS days. Some expert direction would be appreciated.

    This should be fairly simple, first you will want to make a backup of the current internal drive. I would recommend using the external drive for that. I recommend an external FW drive for speed but a USB will work, it's just SLOW! Here is how you will format the external drive.
    1. Launch Disk Utility
    2. Select the external drive on the left side of the pane.
    3. Click the Erase tab and format the external drive as *Mac OS Extended (Journaled)*
    Next you will want to download a copy of SuperDuper (SD), you can get a free license however I strongly recommend paying the $27 for the full licensed version so you can do things like schedule backups, access all it's features and finally get support if needed.
    Once you have installed SD create a bootable clone of your internal drive, then you have a full backup in case something goes haywire. Directions for doing that are very straight forward.
    Next physically install the new HD into the MBP. Once it is installed you will want to format it from the install disc that came with the computer. You will find Disk Utilities on the install disc, format it the same way you did the external HD.
    After you have formatted the new internal HD then you will do one of two things:
    1. Either do a fresh install of OSX from the Install Disc OR
    2. Restore the SuperDuper backup from the external HD.
    If you choose option 1 then go ahead and do the installation from the Install Disc following the simple directions.
    If you choose option 2 then you will boot from the External HD (hold down the Option Key on startup) and then using SD restore what you have on the external HD to the new internal HD. Once you have completed this task then you can boot from the new internal HD, the first time you will again hold down the Option Key on start up choose the internal HD. Then using System Prefrences-Startup Disk and choose the internal drive.
    Once you have completed either Option 1 or 2 then you can begin Bootcamp Assistant and CLOSELY follow the instructions for loading Microsoft Windows.
    Once you have ruined your MBP by installing MS Windows then you can still use SD for creating backups of the internal HD to the external HD.
    Regards,
    Roger

  • Win XP Installation problem on System with KT880 DELTA FSR

    WHen I try install win xp with sp2 included, installation fails in about 19 minute to end in graphical part of installation.
    when installation crashes i see only blue screen with
    IRQL_NOT_LESS_OR_EQUAL
    configuration is here
    CyberCase CY 229 ATX se zdrojem 400W
    MB MSI KT880 Delta FSR
    CPU Athlon XP 2800+ Barton BOX
    DIMM 512 CL 2.5 8x32 Apacer
    GPU Sapphire Radeon 9600
    FDD ALPS 3.5"
    HDD WD 80GB IDE on IDE 1
    DVD RW LG GSA 4160B Dual on IDE 2
    I tried in BIOS agp 4x, vlink and fastwrite disabled, etc..
    Help please ..

    You can test the memory by downloading this program,
    http://www.memtest.org/download/1.40/memtest86+-1.40.floppy.zip
    Creates a bootdisk which you must boot from. (Disk cannot be read in windows)
    If the PSU cannot provide enough power then running the memory at a lower frequency can help, as 333Mhz uses less power than 400Mhz.
    Test the memory at 333Mhz and see if you get any errors, maybe ask a friend to run the memory at 400Mhz with memtest.
    If it does run at 400Mhz (200Mhz) without any errors then it is not faulty.
    From this point forward you will always test any memory modules that you buy with memtest.
    It is a very useful program.

  • Lenovo G560 and Office 2013 installation problems.

    I recently acquired a copy of Office 2013 and I upgraded my office 2010 to 2013. However, I get a response that some office packages could not open because set up could not find or validate an installition file. Please try reinstalling office from the installation source, or if you installed from a downloaded package, please redownload and reinstall. I have tried severally to reinstall but still facing the same problem. The only Office 15 package that work is Powerpoint. Im running Office on a Lenovo G560 core i3 processer, 3GB RAM and 320 HDD. The Office 15 package is OFFICE 2013 VL. Please help. I am desperate. Please help.

    hi  onyanchaerick,
    If the above procedure doesn't work, you can also try to:
    1. Fully remove MS Office 2010 by following this or this guide.
    2. If you have an Office Professional Plus 2013, download a trial version here, then activate it with your full version product key.
    Goodluck!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • CF 9 Win 7 Installation Problem

    I am trying to install Coldfusion 9, Developer Edition, so that I can work on Coldfusion applications through Dreamweaver.  I have downloaded the file coldfusion_9_WWE_win64.  After "Install Anywhere" runs, I have selected most of the default components for the Built-in web server, and "Enable RDS."  The installation process hangs without crashing at "Installing ... Install Merge Module (Build Time): CFDotNet_64.iam.zip"  I have downloaded the latest version of Adobe Creative Suite 5, but it is not running during the installation.  I also have Norton 360, but I have disabled the firewall during the installation.  I have uninstalled and reinstalled both ColdFusion and the Adobe Creative suite, but this problem recurs.  I have Windows 7 Home Premium, "System Type, 64 bit operating system", and no other systems connected to this computer.

    Thank you for your offer to look at the installation log.
    I let the installer run all night, this is what was visible this morning.  The installer was still running.  I forced it to quit, restarted the machine, and configured it through the CF Administrator.  It seems to work.  I can use "live view" through Dreamweaver to see dynamic pages.  So, it seems to have fixed itself, even though the installer never finished properly.
    Here is the log:
    "Severity","ThreadID","Date","Time","Application","Message"
    "Information","main","12/16/10","03:21:46",,"C:\ColdFusion9\logs\server.log initialized"
    "Information","main","12/16/10","03:21:46",,"Starting logging..."
    "Information","main","12/16/10","03:21:46",,"Starting license..."
    "Information","main","12/16/10","03:21:48",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","03:21:48",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","03:21:48",,"Developer Edition enabled"
    "Information","main","12/16/10","03:21:48",,"Starting crypto..."
    "Information","main","12/16/10","03:21:48",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","03:21:48",,"Starting security..."
    "Information","main","12/16/10","03:21:50",,"Starting scheduler..."
    "Information","main","12/16/10","03:21:50",,"Starting WatchService..."
    "Information","main","12/16/10","03:21:50",,"Starting debugging..."
    "Information","main","12/16/10","03:22:13",,"Starting sql..."
    "Information","main","12/16/10","03:22:14",,"Starting mail..."
    "Information","main","12/16/10","03:22:14",,"Starting runtime..."
    "Information","main","12/16/10","03:22:15",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","03:22:15",,"Starting cron..."
    "Information","main","12/16/10","03:22:15",,"Starting registry..."
    "Information","main","12/16/10","03:22:15",,"Starting client..."
    "Information","main","12/16/10","03:22:15",,"Starting xmlrpc..."
    "Information","main","12/16/10","03:22:15",,"Starting graphing..."
    "Information","main","12/16/10","03:22:16",,"Starting verity..."
    "Information","main","12/16/10","03:22:16",,"Starting solr..."
    "Information","main","12/16/10","03:22:16",,"Starting archive..."
    "Information","main","12/16/10","03:22:16",,"Starting document..."
    "Information","main","12/16/10","03:22:16",,"Starting eventgateway..."
    "Information","main","12/16/10","03:22:16",,"Starting FlexAssembler..."
    "Information","main","12/16/10","03:22:16",,"Starting .NET..."
    "Information","main","12/16/10","03:22:16",,"Starting Monitoring..."
    "Information","main","12/16/10","03:22:17",,"ColdFusion started"
    "Information","web-0","12/16/10","08:19:21",,"Pool Manager Started"
    "Information","Thread-1","12/16/10","11:20:55",,"ColdFusion stopped"
    "Information","main","12/16/10","11:22:54",,"Starting logging..."
    "Information","main","12/16/10","11:22:54",,"Starting license..."
    "Information","main","12/16/10","11:22:58",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","11:22:58",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","11:22:58",,"Developer Edition enabled"
    "Information","main","12/16/10","11:22:58",,"Starting crypto..."
    "Information","main","12/16/10","11:22:58",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","11:22:58",,"Starting security..."
    "Information","main","12/16/10","11:22:59",,"Starting scheduler..."
    "Information","main","12/16/10","11:22:59",,"Starting WatchService..."
    "Information","main","12/16/10","11:22:59",,"Starting debugging..."
    "Information","main","12/16/10","11:22:59",,"Starting sql..."
    "Information","main","12/16/10","11:22:59",,"Pool Manager Started"
    "Information","main","12/16/10","11:22:59",,"Starting mail..."
    "Information","main","12/16/10","11:22:59",,"Starting runtime..."
    "Information","main","12/16/10","11:23:00",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","11:23:00",,"Starting cron..."
    "Information","main","12/16/10","11:23:00",,"Starting registry..."
    "Information","main","12/16/10","11:23:00",,"Starting client..."
    "Information","main","12/16/10","11:23:01",,"Starting xmlrpc..."
    "Information","main","12/16/10","11:23:03",,"Starting graphing..."
    "Information","main","12/16/10","11:23:04",,"Starting verity..."
    "Information","main","12/16/10","11:23:04",,"Starting solr..."
    "Information","main","12/16/10","11:23:04",,"Starting archive..."
    "Information","main","12/16/10","11:23:04",,"Starting document..."
    "Information","main","12/16/10","11:23:04",,"Starting eventgateway..."
    "Information","main","12/16/10","11:23:05",,"Starting FlexAssembler..."
    "Information","main","12/16/10","11:23:05",,"Starting .NET..."
    "Information","main","12/16/10","11:23:06",,"Starting Monitoring..."
    "Information","main","12/16/10","11:23:06",,"ColdFusion started"
    "Information","main","12/16/10","12:14:09",,"Starting logging..."
    "Information","main","12/16/10","12:14:09",,"Starting license..."
    "Information","main","12/16/10","12:14:11",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","12:14:11",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","12:14:11",,"Developer Edition enabled"
    "Information","main","12/16/10","12:14:11",,"Starting crypto..."
    "Information","main","12/16/10","12:14:11",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","12:14:11",,"Starting security..."
    "Information","main","12/16/10","12:14:11",,"Starting scheduler..."
    "Information","main","12/16/10","12:14:11",,"Starting WatchService..."
    "Information","main","12/16/10","12:14:12",,"Starting debugging..."
    "Information","main","12/16/10","12:14:12",,"Starting sql..."
    "Information","main","12/16/10","12:14:12",,"Pool Manager Started"
    "Information","main","12/16/10","12:14:12",,"Starting mail..."
    "Information","main","12/16/10","12:14:12",,"Starting runtime..."
    "Information","main","12/16/10","12:14:12",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","12:14:12",,"Starting cron..."
    "Information","main","12/16/10","12:14:12",,"Starting registry..."
    "Information","main","12/16/10","12:14:12",,"Starting client..."
    "Information","main","12/16/10","12:14:14",,"Starting xmlrpc..."
    "Information","main","12/16/10","12:14:14",,"Starting graphing..."
    "Information","main","12/16/10","12:14:15",,"Starting verity..."
    "Information","main","12/16/10","12:14:15",,"Starting solr..."
    "Information","main","12/16/10","12:14:15",,"Starting archive..."
    "Information","main","12/16/10","12:14:15",,"Starting document..."
    "Information","main","12/16/10","12:14:15",,"Starting eventgateway..."
    "Information","main","12/16/10","12:14:16",,"Starting FlexAssembler..."
    "Information","main","12/16/10","12:14:16",,"Starting .NET..."
    "Information","main","12/16/10","12:14:16",,"Starting Monitoring..."
    "Information","main","12/16/10","12:14:16",,"ColdFusion started"
    "Information","main","12/17/10","08:20:40",,"Starting logging..."
    "Information","main","12/17/10","08:20:40",,"Starting license..."
    "Information","main","12/17/10","08:20:57",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","08:20:57",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","08:20:57",,"Developer Edition enabled"
    "Information","main","12/17/10","08:20:57",,"Starting crypto..."
    "Information","main","12/17/10","08:20:57",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","08:20:57",,"Starting security..."
    "Information","main","12/17/10","08:20:59",,"Starting scheduler..."
    "Information","main","12/17/10","08:20:59",,"Starting WatchService..."
    "Information","main","12/17/10","08:20:59",,"Starting debugging..."
    "Information","main","12/17/10","08:20:59",,"Starting sql..."
    "Information","main","12/17/10","08:21:00",,"Starting mail..."
    "Information","main","12/17/10","08:21:00",,"Starting runtime..."
    "Information","main","12/17/10","08:21:03",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","08:21:03",,"Starting cron..."
    "Information","main","12/17/10","08:21:03",,"Starting registry..."
    "Information","main","12/17/10","08:21:03",,"Starting client..."
    "Information","main","12/17/10","08:21:03",,"Starting xmlrpc..."
    "Information","main","12/17/10","08:21:04",,"Starting graphing..."
    "Information","main","12/17/10","08:21:05",,"Starting verity..."
    "Information","main","12/17/10","08:21:05",,"Starting solr..."
    "Information","main","12/17/10","08:21:05",,"Starting archive..."
    "Information","main","12/17/10","08:21:05",,"Starting document..."
    "Information","main","12/17/10","08:21:06",,"Starting eventgateway..."
    "Information","main","12/17/10","08:21:06",,"Starting FlexAssembler..."
    "Information","main","12/17/10","08:21:06",,"Starting .NET..."
    "Information","main","12/17/10","08:21:07",,"Starting Monitoring..."
    "Information","main","12/17/10","08:21:07",,"ColdFusion started"
    "Information","Thread-1","12/17/10","08:48:37",,"ColdFusion stopped"
    "Information","main","12/17/10","09:07:31",,"Starting logging..."
    "Information","main","12/17/10","09:07:31",,"Starting license..."
    "Information","main","12/17/10","09:07:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:07:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:07:33",,"Developer Edition enabled"
    "Information","main","12/17/10","09:07:33",,"Starting crypto..."
    "Information","main","12/17/10","09:07:33",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:07:33",,"Starting security..."
    "Information","main","12/17/10","09:07:33",,"Starting scheduler..."
    "Information","main","12/17/10","09:07:34",,"Starting WatchService..."
    "Information","main","12/17/10","09:07:34",,"Starting debugging..."
    "Information","main","12/17/10","09:07:34",,"Starting sql..."
    "Information","main","12/17/10","09:07:34",,"Starting mail..."
    "Information","main","12/17/10","09:07:35",,"Starting runtime..."
    "Information","main","12/17/10","09:07:37",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:07:37",,"Starting cron..."
    "Information","main","12/17/10","09:07:37",,"Starting registry..."
    "Information","main","12/17/10","09:07:38",,"Starting client..."
    "Information","main","12/17/10","09:07:39",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:07:40",,"Starting graphing..."
    "Information","main","12/17/10","09:07:41",,"Starting verity..."
    "Information","main","12/17/10","09:07:41",,"Starting solr..."
    "Information","main","12/17/10","09:07:41",,"Starting archive..."
    "Information","main","12/17/10","09:07:41",,"Starting document..."
    "Information","main","12/17/10","09:07:42",,"Starting eventgateway..."
    "Information","main","12/17/10","09:07:42",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:07:42",,"Starting .NET..."
    "Information","main","12/17/10","09:07:43",,"Starting Monitoring..."
    "Information","main","12/17/10","09:07:43",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:13:57",,"ColdFusion stopped"
    "Information","main","12/17/10","09:22:01",,"Starting logging..."
    "Information","main","12/17/10","09:22:01",,"Starting license..."
    "Information","main","12/17/10","09:22:02",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:22:02",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:22:02",,"Developer Edition enabled"
    "Information","main","12/17/10","09:22:03",,"Starting crypto..."
    "Information","main","12/17/10","09:22:03",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:22:03",,"Starting security..."
    "Information","main","12/17/10","09:22:03",,"Starting scheduler..."
    "Information","main","12/17/10","09:22:03",,"Starting WatchService..."
    "Information","main","12/17/10","09:22:03",,"Starting debugging..."
    "Information","main","12/17/10","09:22:03",,"Starting sql..."
    "Information","main","12/17/10","09:22:03",,"Starting mail..."
    "Information","main","12/17/10","09:22:04",,"Starting runtime..."
    "Information","main","12/17/10","09:22:04",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:22:04",,"Starting cron..."
    "Information","main","12/17/10","09:22:04",,"Starting registry..."
    "Information","main","12/17/10","09:22:04",,"Starting client..."
    "Information","main","12/17/10","09:22:05",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:22:06",,"Starting graphing..."
    "Information","main","12/17/10","09:22:06",,"Starting verity..."
    "Information","main","12/17/10","09:22:06",,"Starting solr..."
    "Information","main","12/17/10","09:22:06",,"Starting archive..."
    "Information","main","12/17/10","09:22:06",,"Starting document..."
    "Information","main","12/17/10","09:22:06",,"Starting eventgateway..."
    "Information","main","12/17/10","09:22:07",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:22:07",,"Starting .NET..."
    "Information","main","12/17/10","09:22:07",,"Starting Monitoring..."
    "Information","main","12/17/10","09:22:07",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:32:07",,"ColdFusion stopped"
    "Information","main","12/17/10","09:44:30",,"Starting logging..."
    "Information","main","12/17/10","09:44:30",,"Starting license..."
    "Information","main","12/17/10","09:44:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:44:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:44:33",,"Developer Edition enabled"
    "Information","main","12/17/10","09:44:34",,"Starting crypto..."
    "Information","main","12/17/10","09:44:34",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:44:34",,"Starting security..."
    "Information","main","12/17/10","09:44:35",,"Starting scheduler..."
    "Information","main","12/17/10","09:44:35",,"Starting WatchService..."
    "Information","main","12/17/10","09:44:35",,"Starting debugging..."
    "Information","main","12/17/10","09:44:36",,"Starting sql..."
    "Information","main","12/17/10","09:44:36",,"Starting mail..."
    "Information","main","12/17/10","09:44:36",,"Starting runtime..."
    "Information","main","12/17/10","09:44:36",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:44:36",,"Starting cron..."
    "Information","main","12/17/10","09:44:36",,"Starting registry..."
    "Information","main","12/17/10","09:44:36",,"Starting client..."
    "Information","main","12/17/10","09:44:36",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:44:37",,"Starting graphing..."
    "Information","main","12/17/10","09:44:37",,"Starting verity..."
    "Information","main","12/17/10","09:44:37",,"Starting solr..."
    "Information","main","12/17/10","09:44:37",,"Starting archive..."
    "Information","main","12/17/10","09:44:37",,"Starting document..."
    "Information","main","12/17/10","09:44:37",,"Starting eventgateway..."
    "Information","main","12/17/10","09:44:38",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:44:38",,"Starting .NET..."
    "Information","main","12/17/10","09:44:38",,"Starting Monitoring..."
    "Information","main","12/17/10","09:44:38",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:48:28",,"ColdFusion stopped"
    "Information","main","12/17/10","09:50:23",,"Starting logging..."
    "Information","main","12/17/10","09:50:23",,"Starting license..."
    "Information","main","12/17/10","09:50:25",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:50:25",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:50:25",,"Developer Edition enabled"
    "Information","main","12/17/10","09:50:25",,"Starting crypto..."
    "Information","main","12/17/10","09:50:25",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:50:25",,"Starting security..."
    "Information","main","12/17/10","09:50:25",,"Starting scheduler..."
    "Information","main","12/17/10","09:50:25",,"Starting WatchService..."
    "Information","main","12/17/10","09:50:25",,"Starting debugging..."
    "Information","main","12/17/10","09:50:25",,"Starting sql..."
    "Information","main","12/17/10","09:50:26",,"Starting mail..."
    "Information","main","12/17/10","09:50:26",,"Starting runtime..."
    "Information","main","12/17/10","09:50:26",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:50:26",,"Starting cron..."
    "Information","main","12/17/10","09:50:26",,"Starting registry..."
    "Information","main","12/17/10","09:50:27",,"Starting client..."
    "Information","main","12/17/10","09:50:28",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:50:30",,"Starting graphing..."
    "Information","main","12/17/10","09:50:32",,"Starting verity..."
    "Information","main","12/17/10","09:50:33",,"Starting solr..."
    "Information","main","12/17/10","09:50:33",,"Starting archive..."
    "Information","main","12/17/10","09:50:33",,"Starting document..."
    "Information","main","12/17/10","09:50:34",,"Starting eventgateway..."
    "Information","main","12/17/10","09:50:35",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:50:35",,"Starting .NET..."
    "Information","main","12/17/10","09:50:35",,"Starting Monitoring..."
    "Information","main","12/17/10","09:50:39",,"ColdFusion started"
    "Information","Thread-1","12/17/10","11:03:02",,"ColdFusion stopped"
    "Information","main","12/17/10","11:04:52",,"Starting logging..."
    "Information","main","12/17/10","11:04:52",,"Starting license..."
    "Information","main","12/17/10","11:04:53",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:04:53",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:04:53",,"Developer Edition enabled"
    "Information","main","12/17/10","11:04:53",,"Starting crypto..."
    "Information","main","12/17/10","11:04:53",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","11:04:53",,"Starting security..."
    "Information","main","12/17/10","11:04:54",,"Starting scheduler..."
    "Information","main","12/17/10","11:04:54",,"Starting WatchService..."
    "Information","main","12/17/10","11:04:54",,"Starting debugging..."
    "Information","main","12/17/10","11:04:54",,"Starting sql..."
    "Information","main","12/17/10","11:04:54",,"Starting mail..."
    "Information","main","12/17/10","11:04:54",,"Starting runtime..."
    "Information","main","12/17/10","11:04:54",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","11:04:54",,"Starting cron..."
    "Information","main","12/17/10","11:04:54",,"Starting registry..."
    "Information","main","12/17/10","11:04:54",,"Starting client..."
    "Information","main","12/17/10","11:04:55",,"Starting xmlrpc..."
    "Information","main","12/17/10","11:04:55",,"Starting graphing..."
    "Information","main","12/17/10","11:04:56",,"Starting verity..."
    "Information","main","12/17/10","11:04:56",,"Starting solr..."
    "Information","main","12/17/10","11:04:56",,"Starting archive..."
    "Information","main","12/17/10","11:04:56",,"Starting document..."
    "Information","main","12/17/10","11:04:56",,"Starting eventgateway..."
    "Information","main","12/17/10","11:05:06",,"Starting FlexAssembler..."
    "Information","main","12/17/10","11:05:06",,"Starting .NET..."
    "Information","main","12/17/10","11:05:06",,"Starting Monitoring..."
    "Information","main","12/17/10","11:05:06",,"ColdFusion started"
    "Information","main","12/17/10","11:17:23",,"Starting logging..."
    "Information","main","12/17/10","11:17:23",,"Starting license..."
    "Information","main","12/17/10","11:17:24",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:17:24",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:17:24",,"Developer Edition enabled"
    "Information","main","12/17/10","11:17:24",,"Starting crypto..."
    "Information","main","12/17/10","11:17:24",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","11:17:24",,"Starting security..."
    "Information","main","12/17/10","11:17:24",,"Starting scheduler..."
    "Information","main","12/17/10","11:17:24",,"Starting WatchService..."
    "Information","main","12/17/10","11:17:24",,"Starting debugging..."
    "Information","main","12/17/10","11:17:24",,"Starting sql..."
    "Information","main","12/17/10","11:17:25",,"Starting mail..."
    "Information","main","12/17/10","11:17:25",,"Starting runtime..."
    "Information","main","12/17/10","11:17:25",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","11:17:25",,"Starting cron..."
    "Information","main","12/17/10","11:17:25",,"Starting registry..."
    "Information","main","12/17/10","11:17:25",,"Starting client..."
    "Information","main","12/17/10","11:17:26",,"Starting xmlrpc..."
    "Information","main","12/17/10","11:17:29",,"Starting graphing..."
    "Information","main","12/17/10","11:17:29",,"Starting verity..."
    "Information","main","12/17/10","11:17:29",,"Starting solr..."
    "Information","main","12/17/10","11:17:29",,"Starting archive..."
    "Information","main","12/17/10","11:17:29",,"Starting document..."
    "Information","main","12/17/10","11:17:29",,"Starting eventgateway..."
    "Information","main","12/17/10","11:17:42",,"Starting FlexAssembler..."
    "Information","main","12/17/10","11:17:42",,"Starting .NET..."
    "Information","main","12/17/10","11:17:42",,"Starting Monitoring..."
    "Information","main","12/17/10","11:17:42",,"ColdFusion started"
    "Information","web-1","12/17/10","11:31:35",,"Pool Manager Started"
    "Information","Thread-1","12/17/10","11:38:21",,"ColdFusion stopped"
    "Information","main","12/20/10","08:29:24",,"Starting logging..."
    "Information","main","12/20/10","08:29:24",,"Starting license..."
    "Information","main","12/20/10","08:29:49",,"Invalid ColdFusion 9 license."
    "Information","main","12/20/10","08:29:49",,"Invalid ColdFusion 9 license."
    "Information","main","12/20/10","08:29:49",,"Developer Edition enabled"
    "Information","main","12/20/10","08:29:50",,"Starting crypto..."
    "Information","main","12/20/10","08:29:50",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/20/10","08:29:50",,"Starting security..."
    "Information","main","12/20/10","08:29:51",,"Starting scheduler..."
    "Information","main","12/20/10","08:29:51",,"Starting WatchService..."
    "Information","main","12/20/10","08:29:51",,"Starting debugging..."
    "Information","main","12/20/10","08:29:52",,"Starting sql..."
    "Information","main","12/20/10","08:29:52",,"Starting mail..."
    "Information","main","12/20/10","08:29:52",,"Starting runtime..."
    "Information","main","12/20/10","08:29:54",,"CORBA Configuration not enabled"
    "Information","main","12/20/10","08:29:54",,"Starting cron..."
    "Information","main","12/20/10","08:29:54",,"Starting registry..."
    "Information","main","12/20/10","08:29:54",,"Starting client..."
    "Information","main","12/20/10","08:29:54",,"Starting xmlrpc..."
    "Information","main","12/20/10","08:29:55",,"Starting graphing..."
    "Information","main","12/20/10","08:29:56",,"Starting verity..."
    "Information","main","12/20/10","08:29:56",,"Starting solr..."
    "Information","main","12/20/10","08:29:56",,"Starting archive..."
    "Information","main","12/20/10","08:29:56",,"Starting document..."
    "Information","main","12/20/10","08:29:56",,"Starting eventgateway..."
    "Information","main","12/20/10","08:29:57",,"Starting FlexAssembler..."
    "Information","main","12/20/10","08:29:57",,"Starting .NET..."
    "Information","main","12/20/10","08:29:58",,"Starting Monitoring..."
    "Information","main","12/20/10","08:29:58",,"ColdFusion started"
    "Information","main","12/21/10","08:52:19",,"Starting logging..."
    "Information","main","12/21/10","08:52:19",,"Starting license..."
    "Information","main","12/21/10","08:52:21",,"Invalid ColdFusion 9 license."
    "Information","main","12/21/10","08:52:21",,"Invalid ColdFusion 9 license."
    "Information","main","12/21/10","08:52:21",,"Developer Edition enabled"
    "Information","main","12/21/10","08:52:21",,"Starting crypto..."
    "Information","main","12/21/10","08:52:21",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/21/10","08:52:21",,"Starting security..."
    "Information","main","12/21/10","08:52:22",,"Starting scheduler..."
    "Information","main","12/21/10","08:52:23",,"Starting WatchService..."
    "Information","main","12/21/10","08:52:23",,"Starting debugging..."
    "Information","main","12/21/10","08:52:51",,"Starting sql..."
    "Information","main","12/21/10","08:52:52",,"Starting mail..."
    "Information","main","12/21/10","08:52:52",,"Starting runtime..."
    "Information","main","12/21/10","08:52:56",,"CORBA Configuration not enabled"
    "Information","main","12/21/10","08:52:56",,"Starting cron..."
    "Information","main","12/21/10","08:52:56",,"Starting registry..."
    "Information","main","12/21/10","08:52:56",,"Starting client..."
    "Information","main","12/21/10","08:52:56",,"Starting xmlrpc..."
    "Information","main","12/21/10","08:52:58",,"Starting graphing..."
    "Information","main","12/21/10","08:52:59",,"Starting verity..."
    "Information","main","12/21/10","08:52:59",,"Starting solr..."
    "Information","main","12/21/10","08:52:59",,"Starting archive..."
    "Information","main","12/21/10","08:52:59",,"Starting document..."
    "Information","main","12/21/10","08:52:59",,"Starting eventgateway..."
    "Information","main","12/21/10","08:53:00",,"Starting FlexAssembler..."
    "Information","main","12/21/10","08:53:00",,"Starting .NET..."
    "Information","main","12/21/10","08:53:00",,"Starting Monitoring..."
    "Information","main","12/21/10","08:53:00",,"ColdFusion started"

  • BT Infinity and BT Sport Installation Problems

    I recently completed an order to have BT Infinity installed, but unfortunately could not get BT Sport added at the same time due to technical problems. I immediately called BT to ensure BT Sport could be added to the order to ensure that everything would be up and running on August 1st which is my installation date. The adviser assured me that I can call BT whenever I want to get BT Sport and BT Sport HD for free once the problems had been fixed and that everything would be fine for August 1st. I called up earlier today and was told that I'm going have to cancel my order and replace the order again to get BT Sport added on, however this will mean my installation date gets put back to August 8th or further back. Normally I wouldn't have an issue with this, but by pushing back the installation date, it will mean that I have no internet for at least eight days and my current provider have been unwilling to extend my broadband for a couple of days unless I wish to renew my contract with them. I'm just really annoyed as I called BT as soon as I was aware of the issue and was assured that everything would be fine, but now they have changed their tune and tell me that it is not possible to get everything for August 1st. If I had been told this when I originally rang, I could have done something about it, but now it is not possible. In short, I'm not really impressed with BT's service and expected a lot better from a major company. 

    From what I understand BT sport is available to all new & existing customers so I'm sorry to say you've been misinformed. They way it works I believe is once you've got your BT ID after installation, you will be able to activate your BT Sport services by logging in to your BT account once BT Sport launches.
    http://www.bt.com/sport/3-ways-to-watch-bt-sport.h​tml
    There is an advantage to placing your order online, as you will recieve a sainsburys voucher and other online only offers.

  • HT4592 Airport and Java update installation problem

    I tried to install the recommended updates, but the Airport 5.5.3 and Java for Mac OSX 10.5 Update 10 1.0 wouldn't install because they couldn't be verified.  What does this mean?  I don't understand why Apple would need to verify them, or be unable to verify them, if they come from Apple.  Also, I've been having trouble with video on my MacBook Pro and am wondering if this problem could be related to the installation issue? 

    I just tried the updates again and these were the error messages I received:
    For Java: The Installer could not validate the contents of the ‘JavaForMacOSX10.5Update10’ package. Contact the software manufacturer for assistance.
    And for Airport: The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.

  • Time Machine and Snow Leopard installation problem

    I'm trying to install Snow Leopard, but keep getting an error saying that my hard drive is used for time machin back ups. I have unplugged my external device, turned off time machine, yet this keeps happening. What am I doing wrong? I have been able to install Leopard on the computers that I haven't used time machine.

    BusyChris18 wrote:
    1) Do I have to do anything special with Time Machine BEFORE I install SL? I have been doing regular backups with TM.
    Do a "final" backup and turn TM off.
    2) should Time machine disc be off/disconnected when I do the install?
    It's safest to eject and disconnect it, "just in case."
    3) After I reconnect TM disc after SL install, do I have to "migrate" stuff from TM? OR will it just do a new backup and work like normal from that point forward.
    If you do the normal install, there's no migration needed. 99.9 % of everything will be fine. In some rare cases of 3rd-party apps putting things in unusual places, there may be a problem, and you may need to re-enter some 3rd-party app purchase codes.
    If you erase the drive, then install SL, then yes, of course, you'll have to transfer your data. There should be no reason to do that, but some folks seem to do it out of habit. If you do that, when your Mac boots up again, you can transfer your data from the TM backups. And if you do that, I'd strongly recommend making a separate full backup on a second external drive, again "just in case," preferably a "bootable clone." CarbonCopyCloner and SuperDuper are the most common. (There was a post here just last week where someone did this, the restore got to 99%, then BAM! the TM disk failed.)
    TM backups should just continue normally, although there will almost certainly be a long "Calculating Changes" phase (used to be called "Preparing"). And they've added a progress bar, which doesn't seem to be particularly accurate.
    However, it may try a new, full backup. If it does, cancel the backup and do a Restart. That may reset whatever confused it. If not, there's nothing you can do to prevent it.
    4) Will I be able to access files that were backuped when I have just Leopard?
    Yes.

  • Acrobat 5 and reader 9 installation problems???

    I work for small private non-profit school.  We have been using acrobat 5.0 for some time with much success.  We had to purchase a new computer.  I loaded the acrobat 5 and then was prompted at some point to download reader 9.  I can't print checks in quickbooks online and when I print to pdf it saves as tiff file, not pdf.  I don't know if they're not working together, if I installed improperly, or what.  I want to be able to print to pdf for all programs and convert pdf files to use in word.  What do I need to do?  I can't upgrade or purchase acrobat pro.  Thank you for your help!

    I'm running XP as well (partitioned harddrive with windows 7).  I right clicked a pdf document to "open with acrobat reader 9.3" but it didn't give me an option to open with it all the time.  This is what I want because when I go to quickbooks online it automatically opens AA5 which quickbooks doesn't support.
    If I open reader 9 before quickbooks, it still opens AA5 by default.
    My other machine has XP with acrobat 5.0 and reader 6.0 and has no problems.  What about if I delete reader 9 and download reader 6?  Do you know of any issues if I uninstall reader 9?  Are there shared files that will corrupt AA5?

  • Wine-mono installation problem.

    On starting of winecfg, the error pops that "Mono is not found and to run .net applications it is needed", I clicked on 'install' but the download doesn't progress, it's stucked like forever (~35-40 minutes) and no, my internet is not slow.
    Is there anyway I can download wine-mono manually and install it ? I did tried wine-mono from sourceforge but the download speed is very poor (like 2 to 5 Kbps). Tried different mirrors too, same result. Is there anyother place from where i can get latest wine-mono ?
    Last edited by NewbLinuxUser (2015-04-18 08:57:20)

    Not sure what you mean. Did you install the package from the repos https://www.archlinux.org/packages/?sort=&q=wine-mono ?

  • 570GTX TWIN FROZR II OC R win 7 installation problem

    Hello guys,
    I just formatted my computer, I have a fresh installation. When I install the latest Driver 306.97 and restart everything goes crazy.
    Desktop icons disappear, when I press crtl+alt+delete its blacked out, on the other hand i can start programs but  they are invisible i can hear them but cant see them. I tried with updating the windows with all updates. Installing the original driver from the CD.
    Any ideas?
    I also tried loading the motherboard drives first then installing the graphic driver...
    Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
    VGA MSI|N570GTX TWIN FROZR II OC R
    Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model 996988
    ASUS P8P67 LE <REV 3.0> LGA 1155 SATA 6Gbps and USB 3.0 Supported
    Corsair Professional Series Gold High Performance 850-Watt Power Supply CMPSU-850AX
    Intel P67 DDR3 2200 ATX Motherboard
    I have NOCTUA NH-D14 as CPU cooler
    SilverStone Fortress FT02
    OCZ Technology 60 GB Vertex 2 Series SATA II 2.5-Inch Solid State Drive

    thats what i did previously... downloaded http://www.msi.com/product/vga/N570GTX-Twin-Frozr-II-OC.html#/?div=Driver&os=Win7%2064 this drive.
    I had no luck with that. Anything else i could try?

  • I have a hp deskjet 932c and i can't get it to print in color.

    Test page colors are fine.  Ink levels are fine.  I calibrated, cleaned, and aligned.  There is no setting for color copies that I can find.

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Maybe you are looking for

  • Vista not showing up in startup disc pref?

    I have Vista 64bit Business installed, via a bootcamp partition on a second internal drive on my 8 Core Mac Pro, which is running 10.6.2. Occasionlly I will use VMware fusion running off my bootcamp partition, but yesterday when I tried this, vmware

  • Can't login to Directory Service Control Center 6

    After installition of Sun JES 5 Directory Server (OS Solaris SPARC 9) i'm trying to login to DSCC. I provide username admin and a password for admin. But after clicking the LogIn Button I see a message Authentification error. IWhen I explore a Direct

  • Restoring backed up info?

    How do I extract backed up files, ie. I deleted some important text messages by mistake and need to find them

  • Need to select from BSEG on Non Key fields.

    Hi all, I am developing a report on Work Order Cost Analysis. The selection screen has Order Type (AFPO-DAUAT), Plant (AFPO-DWERK), Date range (AFKO-GLTRI) and Part Number (AFKO-PLNBEZ) as the selection criteria. <b>All the orders and their correspon

  • Where do i see the invitation I receive?

    Dear Cisco Team, I would like to know where I can see the invitation I have received through [email protected], I waited for an email in my @yahoo.com email but it never arrived. Where do i see them? Thank you very much Valerio