Deskjet 995 drivers needed for windows 8 - 64bit

I have a great Deskjet 995c that I would still like to use, I have a bunch of ink still and it never gets clogged like my last 3 new HP printers (564 ink type).  Is there a way to make it work with Windows 7 Pro (64-bit) or Windows 8 (64-Bit)?
Thanks in advance for your help. 

http://xpdrivers.com/printer/hewlett-packard/deskj​et/995c/_5_619.cfm

Similar Messages

  • Satellite P100-426 - What sound driver I need for Windows 7 64bit?

    Hello,
    I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
    Maybe someone can help me.
    thank's a lot.
    sven_lee

    Hey,
    The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    According the Toshiba page your notebook has Conexant sound chip
    But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
    I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

  • Drivers needed for Windows 7 for HP 810-230QE

    I recently purchased HP Envy 810-230QE that came with Windows 8.1 OS but due to some incompatibility with some of the applications I had to downgrade to Windows 7. I don't have network adapter drivers that support my model for Windows 7. Please help in resolving this issue. Thank you in advance.

    Paul,
    I searched the wireless driver by using the hardware id  and found the following driver in the link which fixed it. Now I could connect through wireless.
    http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_133353_1
    The solution was given by you  in one of the forums    http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Win7-64-bit-HP-Pavilion-15-P075SA-not...
    Thanks alot,  you made my day.
    Regards.
    Bharath

  • Drivers needed for windows os upgrade?

    I'm updating my os from win98 to win2k.
    do i need new drivers for pci-7344, pci-6110e and ni-5411 (for pci). Labview version, i believe is 5.1, hardware and software purchased in summer 2001.
    Thanks,
    Byron Golden
    U of Houston
    Allied Geophysical Labs

    Hello.
    There are updated versions of the drivers you would need for those boards available on the web, but your LabVIEW version is very old and thus will not be compatible with those driver versions.
    Hopefully you have the CDs with your older driver versions on them. Many drivers are available on the web at:
    http://www.ni.com/downloads/
    You will need NI-Motion, NI-DAQ, and NI-FGEN for the 5411.
    Regards,
    Colin C.
    Applications Engineering
    Colin Christofferson
    Community Web Marketing
    Blog

  • Satellite P20-221: Drivers needed for Windows 7

    Hi,
    i would like to have windows 7 on my P20-221 but i just need few drivers to do that.
    In the first time, can i update my Bios ?
    In a second time, where i can find some toshiba programs (like touch key) compatible with windows 7
    And at last, i just have 4 drivers problems (controler IEEE 1394, modem pci, and 2 unknown peripherics).
    Thank you if you could help me.

    Hi
    The P20 is an oldie and the Win 7 drivers are not released officially for this notebook.
    I didnt find any on the Toshiba European driver page
    So I assume you will need to search for such drivers at your own hand.
    Tip: try to install Win 7 VAP (value added package) and Flash Card Support Utility which are released for newer notebook series like L500 or newer. Usually such tools are not notebook model related so maybe you could download and install this on this P20.
    Furthermore I recommend checking this:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
    This helps you to find drivers for some unknown devices.

  • HP VS19X drivers needed for Windows 7

    my dad has a HP VS19X monitor and is using windows 7 and i would like to know where i can get the drivers for it to support windows 7.

    Drivers for 7 do not exist for almost everything out there that is not natively handled in Windows 7. The monitor should have Plug and Played?
    If you still want to pursue happiness you can try this (you are on your own because this is a release candidate):
    1. create a system restore point to go back in case you don't like how it turns out.
    2. Download the "XP" sp31061  to get to the inf (and ICM if you use it). 
    3. Start the install but halt the install process when the HP Display Installer opens, and open the following path: C:\swsetup\Monitors\SP31061\64bit
    4. Inside you should be able to find a 32 and 64 bit inf that you can right-click on and install.  HP_vs19x64.inf
    Message Edited by RasterBlaster on 07-13-2009 05:46 PM
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Ethernet Controller, SM Bus Controller & USB controller Drivers needed for windows 7 64

    HI there,  I recently downgraded my notebook from windows 8 to windows 7 and now the following hardware drivers are not found:
    Ethernet Controller
    SM Bus Controller
    Universal Serial bus USB controller
    Does anyone know how i can find the drivers for these items on Windows 7, I have no desier to go back to windows 8?  I have an HP notebook PC 15 -e073ca.
    Thanks for your help.
    This question was solved.
    View Solution.

    Try these>>
    Intel Chipset:
    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64959.exe
     Intel MEI:
    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64961.exe
    Intel USB:
    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64965.exe
    Realtek Ethernet:
    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64968.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Help with Drivers for HP dv8315nr for Windows Vista 64bit

    Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't  work either.
    My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
    I appreciate the attention for this manner. Thank you
    Jorge

    I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
    My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
    These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
    thank dr_lynch

  • Tecra A11-11H - Drivers for Windows XP 64bit

    Hi,
    does anyone know where can I find the driver for the wireless card of Tecra A11-11H using Windows XP 64bit, does anyone have a full list of the hardware models Tecra A11-11H using as toshiba support website doesnt have driver for Windows XP 64bit.
    Many thanks

    Hi buddy,
    Windows XP 64bit is not supported by Toshiba so there are no drivers for this OS. The 64bit version of XP was not very popular so probably you will not find all drivers on external pages. If you want XP I would recommend the 32bit version or Windows 7 Professional that has a virtualization mode for XP.
    Tecra A11-11H has Intel WLAN card so check the Intel page directly. Maybe you can find a driver: [www.intel.com]
    Furthermore if you install a hardware diagnostic tool like Everest or PC Wizard 2011 you can check the installed hardware and so you can search for drivers yourself.
    But as I already wrote: Choose another OS ;)

  • I need to download Oracle 10g Client (10.2.0.4) for Window 2003 64bit

    I need to down load Oracle Database 10g Client Release 2 (10.2.0.4) for Windows 2003 64bit server I found the 10.2.0.1 but can't find the 10.2.0.4 download.

    Hi,
    Here is the link.
    Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
    For 32-bit OS, you can get the software from:
    Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
    All the database software can be downloaded from:
    Oracle Database Software Downloads
    http://www.oracle.com/technology/software/products/database/index.html
    Regards,
    Hussein

  • Will Apple release ITunes for Windows XP 64bit?

    Will Apple release ITunes for Windows XP 64bit?

    WARNING: This procedure involves moving, deleting, modifying, and copying system files and possibly sytem registry entries. If you make a mistake you can kill your system [I killed two of mine until I
    figured out the problem with the outdated GEAR drivers]therefore:
    1)Back up your entire system or better yet, get a cheapie new HD like Western digital 2 TB for $69-129 depending whether on sale or not and reinstall your system from scratch on the new drive. If
    computer kraps out you just put the old drive back in.
    2) Some of the procedures here may not be exactly what YOU see on YOUR specific model of computer. I've tried it on a COMPAQ sr1610nx with xp64, I've tried it on a Dell Alien with xp64, and on a
    Gateway GM5442, and will now try from scratch to format harddrive, load xp64, device drivers, OS service packs and patches, AVG free, flash, java, and itunes.
    3) I wrote these instructions down from memory. Read and understand entire procedure before you start. There is some troubleshooting you may need to do to make it work on your particular system. This
    procedure works on 3 different models of 64 bit cpus. One CPU is an INTEL(Gateway), one CPU is an AMD X2 64-bit 4800+ Toledo(Compaq sr1610ns), and the other is an AMD x2 64-bit 3500+(DELL Alien). This
    shows the capability exists on both Intel and AMD x64 architectures.
    4) The current version 10.6.3 will work with modifications(including syncing ipod with ios5 and syncing cd and dvdrom ).
    PROCEDURE: 1)Using you IE 64-bit browser download iTunes64Setup.exe from URL http://www.apple.com/iTunes/download/ to a new directory (For Example: ITUNES-1063-XPX64-TEST).
    2) Using you IE 64-Bit browser download GEAR Drivers at URL http://www.gearsoftware.com/downloads.php?dir=updates/windows/drivers/&file=Driv er_Installer_x86_x64.exe.
    3)Using your IE 64 browser download ORCA Editor at URL http://download.cnet.com/1770-20_4-0.html?query=Orca&tag=404&searchtype=download s .
    4) Using your IE 64 browser download 7-Zip at URL http://download.cnet.com/1770-20_4-0.html?query=7-Zip&platformSelect=&tag=srch&s
    earchtype=downloads&filterName=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebwar e%2CMobile&filter=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebware%2CMobile .
    5)Use 7-Zip to extract Itunes64Setup.exe into sub components.
    6)Use Orca to open and edit iTunes64.msi.
    7)Change Launch Condition from VersionNT64>=600 to VersionNT64>=501. Change ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>501) to ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>=501)
    8) Save and exit iTunes64.msi.
    9) Use Orca to open and edit AppleMobileDeviceSupport64.msi.
    10) Change Launch Condition from (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=600 to (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=501
    11) Save and exit AppleMobileDeviceSupport64.msi.
    12) Use Orca to open and edit AppleApplicationSupport64.msi.
    13) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
    14) Save and exit AppleApplicationSupport64.msi.
    15) Use Orca to open and edit Bonjour64.msi.
    16) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
    18) Install itunes64.
    19) Shutdown and Reboot.
    20) Search your PC for GEAR*.*
    21) Delete all the files found that are deleteable.This will get rid of the bogus Gear drivers (Version 2.2.0.1 from 2008 and 2009) that iTunes installs.
    22) Run Gear drivers installer you downloaded earlier. This will load the correct Gear drivers (Version 2.2.2.0 [or 2.02.02.00- depending where you look in windows for the version number] from 2011 and
    2012 drivers versus defective 2008 and 2009 drivers). The Gear driver connects the cdrom to itunes for sync. The usbappl driver connects the iPod to itunes for sync (Via the USB).
    23) Ensure the file GEARAspiWDM.sys, usbaapl64.sys, also ksthunk.sys is in C:\Windows\system32\Drivers. If not search and locate these files. Then copy them to the correct directories Remember to set
    your More advanced options to Search system folders, Search hidden files and folders, and search subfolders.
    24) Now you must verify registry entry for UpperFilters exists and has GEARAspiWDM for value.
    25) Go to Start, then Run, then enter regedit, then OK. Select HKEY_LOCAL_MACHINE, then SYSTEM, then CurrentControlSet, then Control, then Class, then {4D36E965-E325-11CE-BFC1-08002BE10318}, then
    UpperFilters, right mouse click and select modify, then verify the Value data has the entry GEARAspiWDM. If not go back to {4D36E965-E325-11CE-BFC1-08002BE10318} and right mouse click select new, then
    Multi-String Value, then name it UpperFilters, right mouse click and select modify and enter GEARAspiWDM for Value data, select OK and close registry.
    26) Shutdown and reboot.
    27) Now you need to update the cdrom/dvd driver and the USB driver.
    28) Go to Start, then Control Panel, then System, then Hardware, then Device Manager, select DVD/CD-ROM drives, select Don't search. I will choose the driver to install, then select Next, ensure Show
    compatible hardware is checked. Select CD-ROM as the driver, then Next, then Finish.
    29) Shutdown and reboot.
    30) Start computer, plug in iPod to USB, wait for windows to detect the device, probably detected as a camera. Go to Control Panel, then System, then Hardware, then Device Manager, and find the iPod.
    31) Right mouse click and select Properties, then Driver.
    32) Select Update Driver, then select Install from a specific location (Advanced), then Next, then select Don't search, I will choose the driver to install, then select Next, ensure Show compatible
    hardware box is checked, select USB driver for iPod, then Next, then Finish.
    33) Shutdown and Reboot.
    34) Start iTunes. Ignore the message iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTUnes (This message comes from the device driver install failure for the
    cdroms because the current Itunes installer still contains the bogus outdated Gear drivers). Select OK.
    35) Now Itunes should work.

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Oracle Client 10.2.0.5 32 bits for windows 7 64bits

    Hi
    I do not have access to oracle support, but I really need to download this patch in order to install it on Windows 7 64 bits and 2008 R2...
    Please somebody can put me this patch on a share/ftp or other ? Because I really need this..
    Thanks a lot.
    Jerome
    Oracle Client 10.2.0.5 32 bits for windows 7 64bits
    [email protected]

    Patches are only available to Oracle customers with valid support contracts. If you do have such a contract, pl contact the person in your team who has access to My Oracle Support to download the needed patch. Patches cannot be posted on public servers as this violates ones support contract
    Srini

  • Help!!! new version of I-Tunes 10.5.3.3 for windows 7 64bit. Application exe freeze,s

    Help!!! New version of I-Tunes 10.5.3.3.3 for Windows 7 64bit.
    Application exe freeze,s when trying to access the I-Tunes store.
    While loading, the access to the I-Tunes store bar also freezes.
    The application exe will not let you shut it down as total freeze results.... :-(
    To escape the frozen applacation... . control/shift/delete is the only
    way that works to get back to the desktop...

    I had a very similiar issue and this worked for me:
    ============
    I just found a fix that has worked for many other users with the same 10.5.3.3 issue and it fixed a seperate issue where Apple Mobile Device service drives up CPU by 50-80%.
    The fix is to open a command prompt as an Administrator and run c:\netsh winsock reset     After running this commad you will need to reboot.
    Here is the orginial article:http://www.thebambers.me.uk/wordpress/?p=316
    Although my account is the only Windows 7 account and is an Administrator, I still could not run the command above.  I first had to open a Command Prompt as an Admistrator:
    1) From the main Windows icon (bottom left Windows Flag), select All Programs
    2) Then select Accessories
    3) Then right mouse click on Command Prompt and select Run as Administrator
    4) execute "netsh winsock reset" and reboot
    After performing the steps above, iTunes Store is working great and the CPU with iTunes loaded is averaging less than 10%....A MIRACLE!!!!

  • How big of a partition do I need for windows Xp?

    How Big of a partition do I need for Windows XP? And to be able to run visual Basics program?

    Nobody can answer that question with any certainty because we don't know your computing needs and what specific apps you're going to isntall.
    Regardless, this forum is for the troubleshooting the installation of OS X, not Boot Camp, and you'll probably want to post your question over in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

Maybe you are looking for