Deskjet HP F4172 All-in-one printer and window 10 compatibility

Dear Madam/Sir,
Respectfully I have HP Deskjet F4172 All-in-One Printer, I would like to ask you this question whether my mentioned HP printer will be compatible with window 10 by "29 July, 2015" when window 10 wil be to upgrade, please? and how I am able to get software and drivers, please?

Respectfully, as I before told you, I have HP Deskjet F4172 All-in-One Printer; I downloaded the window 10 upgrade in my PC and when I go to the HP web Site , in the following link, there is not any sotware and drivers for my mentioned above HP printer, please what must I do? there is only some utilitirs that are useless, isn't the above printer compatible with the window 10?I would like to thank you for the attention.http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-F4100-All-in-One-Printer-series/3177560/model/3341350#Z7_3054ICK0KGTE30AQO5O3KA30R1

Similar Messages

C309 All in One Printer and Windows 8

I was recently forced to purchase a new computer due to a power surge that blew out my mother board. The damaged unit had Windows Vista Ultimate OS. My new computer operating system is Windows 8. My new computer has no problem finding the printer and printing usung wi-fi but I cannot load the rest of my HP software that allows me to access my scanner and other C309 features from my computer. is there a software update or fix for this or will I be forced to buy another printer?

Hi,
No need to buy a new printer. Please download the following Software and Driver and install on your new computer:
ftp://15.201.49.135/pub/softlib/software12/COL26021/mp-109738-1/PS_AIO_05_C309a_Net_Full_Win_WW_140_...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home... My printer is set up to print wirlessly on my Network. I need to know is there a firm wear update i can get or a good app to install so i can print??

hi there,
This article should have everything you need to get started . Check it out and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twice since i have owned it. Can you help me out as to what I should do with the printer

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

HP Officejet Pro L7580 All-In-One printer with Windows 8

I have the HP Officejet Pro L7580 All-In-One printer and want to use it with my new laptop that has Windows 8, but it won't accept the Starter CD (Windows 2000, XP, Vista). Where can I get a free download to use with Windows 8? I can print, but currently can scan.

Hello,
You can download the software for your product from the link provided below, after selecting the appropriate Windows 8 operating system of your computer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=2512008&lc=en&cc=us&dlc=en&lang=en&cc=us
The link also has support videos that provide instructions on downloading and instaling the software.
Although I am an HP employee, when I offer advice on HP Products, I'm speaking for myself and not for HP

HP Deskjet Ink Advantage3545 all-in-one printer....Print Filter Pipeline Host Error

I have HP Deskjet Ink Advantage 3545 all-in-one printer
It has encountered _Print Filter Pipeline Host Error .
What should be done as a remedy ..............

Hi Rish
I found this and thought it might help
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Print-filter-pipeline-host-stopped-wor...

HP Deskjet 2540 Series All in One Printer Offline

Ok so I have had this problem for what seems like forever now. This has happened multiple times, and I always have had to use online HP tech support to fix it, but this time I don't seem to have that option. My printer says that the status is offline, and I really need to print something. I have gone through the forums, tries multiple different answers that multiple people say will work, and nothing has worked so far.

HI , Welcome to the HP Support Forums! I understand that you're having issues with your HP Deskjet 2540 Printer going offline. I would like to look into this with you. There are many reasons why this might be happening, is your printer connected wirelessly? Important! Do you turn your printer off between uses? If your printer is connected wirelessly, I recommend you always leave it on so it stays connected to your wireless network. Otherwise, it will lose the wireless network configuration and will need to be setup again and again. To determine which of these documents is suited to the problem, it will depend on whether your wireless light is blinking or is solid. If your wireless light is blinking, then it is no longer on the wireless network. Follow this guide, HP Deskjet 2540 and HP Deskjet Ink Advantage 2540 All-in-One Printer Series - Printer Does Not Maintain Wireless Connection. If the wireless light is solid, than it is still connected the wireless network. Follow this guide, HP Printers - 'Offline' Printer Status Message Displays (Windows 8). What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

HP 3210 All-in-One Printer and Vista

Having trouble with HP 3210 All-in-One Printer/Scanner. Purchased printer late 2006. Upgraded to Vista in February 2008. All functions of the Printer/Scanner have been working just fine with Vista until this month. Error message says 'Unable to Scan or Copy'. Scanned from computer on 12/01/2008 and a week later the error message appeared. Print function from the computer works fine. Buttons on front of the printer for both scan and copy will not work and scanning from the computer will not work. Have tried suggestions from different websites to work-around using a program like Microsoft's Paint but still nothing. Any suggestions will be welcomed.

Resizing and cropping are not the same process.
Image>resize>image size brings up a dialog where you can resize, and if the image is resampled, distortion may ensue.
The crop tool is said, by some, to resample as well, although in many instances minor distortion is not noticed by the uninitiated..
The preferred way (for me) to crop is Image>crop.
If you have a 4x6" picture of a tree, landscape mode, and wish to display the tree in portrait mode, the sure way to avoid the issue is to select the tree with one of the selection tools, then copy/paste it on a canvas which is sized 4x6" portrait mode.
Interesting reading: http://kb2.adobe.com/cps/331/331327.html
I am sure that others will be along, as this topic is not all black and white.

I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-C4700-All-in-One-Printer-series/3794613/model/3940...
First, select your operating system Microsoft Windows Vista (64-bit).
Click Submit.
Click the blue Download button.
Click Next, then follow the prompts for the HP Download and Install Assistant.
Let me know if you need any more help or if this solves your problem!
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

HT2693 Kodak All-in-One printer and Airprint?

Can a Kodak All-in-One printer run with Airprint? Is there a device that adds Airprint and Airplay to devices that do not have that feature?

Kodak does not appear in the list of Compatible Air Print Manufactuers in the following link:
AirPrint Basics.
http://support.apple.com/kb/ht4356
With that said, there are several alternatives both software and hardware based to give non Airprint compatible printers the ability to be used by iPads, iPhones and other iDevices.
If you are running a Mac Pc you can look into Printopia
http://www.ecamm.com/mac/printopia/
If you are more interested in a hardware solution look into Air Print servers such as:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through.
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you.
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication.
Let me know! Happy holiday!

HP deskjet 3055A e-All-in-One printer/scanner Not scanning

Hello I have the all in one as listed. It has worked for ages absolutely fine and the printer both wireless and network still works. The scanner however does not the fact have done a Scan doctor on it. Stops at Twain Scan problem. Despite all the icons having been there from the past the message I get is "The HP Deskjet 305A J611 was not found". Tearing my hair out as uninstalled, loaded up drivers etc and still doesn't work. Interestingly this only happened after I renewed my Norton susbscription and windows office also had issues. Norton was uninstalled by their team and Windows office continued to malfunction regardless. This was sorted out by the Microsoft team successfully and Office and Norton are working fine again. It seems too much of a coincidence but am guessing Twain is being blocked somehow by Norton.....Unfortunately am not much good at technology so any help appreciated

Hi Russkiijim
I understand you are unable to scan. The Print and Scan Doctor shows a Twain error. Twain is the interface standard for Windows and Macintosh that allows imaging hardware devices (such as scanners and digital cameras) to communicate with image processing software.
Lets turn off all start up programs to make sure there isn't something blocking it. Click on start, in search box type in run, enter, then type in msconfig, click ok.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
Then click on the start up tab at the top.
Click on disable all.
Reboot the computer.
Turn off any antivirus software.
Try scanning again.
Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab. Turn the Antivirus software back on again.
I would recommend to run Microsoft Fix It Tool to see if that will fix the twain error if the msconfig didn't work.
You will probably need to uninstall and install the printer again.
Let me know if that helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When scanning, the ADP does not work on my HP Deskjet 3510 e-All-in-One Printer

Ok. This is my second time to enter this. I have an ADF and have tried MULTIPLE times to scan but my scanner WILL NOT use the ADF. I have chkd all the info available on this forum but nothing I have tried has worked. Is it "operator error" or "equipment error"? I have tried using this feature since I bought the printer and it has never worked. Finally decided I needed to see it through and try to get help. But I have been working on this for 4 hrs and feel like a "hostage" -- frustration doesn't quite describe what I feel right now. I am getting in a panick because I NEEDED to scan 10 pps two hrs ago and here I am STILL sitting trying to get this d*%#$ thing to work. PLEASE HELP!!
Thx Nancey
This question was solved.
View Solution.

Hi,
Are you sure the 3510 has an ADF ? I can't see it ANYWHERE:
The one on the top ia the input tray, not ADF.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Deskjet HP F4172 All-in-one printer and window 10 compatibility

Similar Messages

Maybe you are looking for