Deskjet ink advantage 4615 will not print in black

Hello,
I replaced the black ink cartridge a week ago and it worked fine until today.  The printer indicates that the cartridge is full. Today it faded out in the middle of a print and will not return. I have tried all the cleaning procedures recommended by HP with no success. I have also checked that the vent is not blocked.
Operating sys: Win 7 , 32 bit
Warranty expired dec 2013
Any suggestions how I should proceed would be welcome
This question was solved.
View Solution.

Hi arifle,
Have a look at the troubleshooting document linked below:
Officejet 4610 / 4620:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&​lc=en&dlc=en&docname=c03944809
I'd suggest reading from solution 3 down.  You have already stepped through solutions 1&2.
If none of that works then it would probably be a good idea to contact HP support in your area.  Here is a link to contact numbers:
http://welcome.hp.com/country/us/en/wwcontact_us.html
I hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Similar Messages

  • I am unable to Print in Colour - Mac to HP Deskjet Ink Advantage 4615 printer ? help please

    I am unable to Print in colour - Mac to HP Deskjet Ink Advantage 4615, all the test pages print in colour but not anything else . Help Please

    Hello and welcome benjas96,
    I can appreciate your dilemma.  I would recommend contacting our technical support group to get this ironed out.  This is not to say it is not possible, however there are some basics that will need to be isolated and confirmed first.
    Please feel free to contact us and they will be glad to help.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP Deskjet Ink Advantage 4615

    Hi, I just purchase a HP Deskjet Ink Advantage 4615.
    The problem is when the printer goes into sleep mode, it will not automatic wake up.
    I need to switch off the power and on it back again.
    Is there any way to disable the sleep mode?
    The sleep mode only hav 5 mins sleep, 10 mins sleep and 15 mins sleep.
    Please assist.
    Thank you very much
    Terence

    Hello Noob,
    I'm sorry to hear about the frustrating experience with your Deskjet 4615 printer not function correctly for you. I would like to help you.
    I am unsure of a few things and would greatly appreciate if you could respond with some information.
    I would like to know the following:
    Which Operating System are you running? Windows or Mac
    Where you able to successfully install the software/driver, or did you see the installation stop or give an error message?
    In the meantime, here are a few things you can try:
    Reset your Printer and Restart your computer.
    If you are running a Windows Operating System, download and run the Print and Scan Doctor which will search for printing and scanning issues and either correct them or tell you where the issue is so you can better target where the problem is coming from.
    Hope to hear from you shortly!
    Take care
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet ink advantage 4615 fax error

    I recently been having problems with the fax option on my deskjet ink advantage 4615 all-in-one. When I try to use it, I get an error saying "This feature has been disabled. For more information, contact the administrator."
    I have tried restoring to factory default and it still does not make a differerence. Can anyone assist?

    @mikecshammond, Welcome to the forums!
    I understand you are unable to fax from your Deskjet Ink Advantage due to an error message you are receiving, and I wanted to make my own suggestions for you that might help.
    I would recommend resetting the printer, and also make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power.
    Reset Instructions:
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Test now to see if you can send a fax, and if there are any issues or errors, run through the troubleshooting in this guide following the steps in order:
    HP Officejet 4610 All-in-One, Officejet 4620, Deskjet Ink Advantage 4610, and Deskjet Ink Advantage ...
    If the issue persists, give us a call directly to see what your next options are!
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    If you wish to thank me for my efforts to help, click the below.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP DeskJet Ink Advantage 3525 USB not detectable

    My printer HP Deskjet Ink Advantage 3525 suddenly not detectable by the computer, the following were made for troubleshooting
    - tried replacing USB cable, failed.
    - tried connecting to other computer, failed to detect
    In the computer where it is originally connected and installed, I
    - tried connecting different printer, it was detected.
    OS- Windows 7 Pro
    Please assist.
    Thanks

    Hello DariusPH.
    I understand you are receiving problems where your USB cord isn't detecting on your computer. You have tried the necessary troubleshooting steps. Please follow this HP document on Troubleshooting USB Connections For Windows 7.
    If the document above doesn't fix your issue, then please follow this entire HP document on 'Device Setup Failed to Complete' or 'Unknown Device'.
    Please inform me your troubleshooting steps and if this resolved your issue. I will continue to assist you if these documents don't resolve your issue.
    Ashley
    I worked on behalf of HP.

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • My printer will not print in black ,i replaced the ink and now it will not print in black ink

    my printer will not print in black ,i replaced the ink and now it will not print in black ink

    Please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart 7510 will not print in black - brand new HP cartridges

    I just replaced both black cartridges (photo and XL) now printer will not print in black. Even my test page will not print the black. I cleaned the print heads also still nothing.

    Hi rine051662hart,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to print in black ink.
    Please click on the following link that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    Please feel free to write me back if you have additional questions or you can contact HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My HP Photosmart 8250 will not print in black.

    Hi,
    My HP Photosmart 8250 will not print in black. I saw previous posts stating that it will not print in black if any of the color cartridges are empty, but all of the cartridges have ink. Thank you!

    Hi rine051662hart,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to print in black ink.
    Please click on the following link that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    Please feel free to write me back if you have additional questions or you can contact HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Officejet Pro L7590 will not print in black

    I have an All in One Officejet Pro L7590.  When I first got the printer 3 months ago, everything was printing perfectly.  Now, out of nowhere, it will not print in black.  It only prints in color.  I have done all the aligning, printhead cleaning, changing cartridges, etc.  I am at a loss as to what to do.  Has anyone had this problem with this model?  Can anyone help?  Thank you.  

    Thank you so much for responding.  After (3) HP printers all having the same difficulty and support not knowing what the problem was, (also many hours with Support) I determined it was the printheads also.  The printheads don't seem to last very long and can be more costly than the printer itself if you have to keep replacing them.  I changed over to a laser jet.  No printheads needed.  And I have not had any problems so far. Just need to replace the ink cartridges when they run out.  I have the HP Color LaserJet CP1518ni.   

  • My hp6900 E709a will not print in black

    My hp6900 E709a will not print in black

    @Eruption 
    If you've already tried the usual troubleshooting like checking ink levels, running a Printhead Clean etc....
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01641184
    ...then one thing worth a shot (if the printer is out of warranty) is to soak the printhead as described HERE
    1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
    2) Next remove all the ink cartridges, then remove the printhead assembly.
    3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
    4) Remove the printhead and gently dry the electrical contacts.
    5) Put the printhead back in the printer and then reinstall the ink cartridges.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP Photosmart Premium C310a printer that will NOT print in BLACK. It will print in color.

    I have a Photosmart Premium C310 a printer that will NOT print in BLACK.  I tried the unplugging the cord and holding # and 3 and it did not work for me.  I, at first, purchased a new cartridge thinking it had run out of ink.........so now I am out $25.00.
    Any other suggestions.  It does print in color.    HELP! HELP!   The printer is not even 5 months old. 

    Can I ask are you based in the US?
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Hp 3522 will not print in black

    hp 3522 will not print in black - has all new cartridges - replaced black for dim printing and now none at all - retried original cartridge - all hp original cart's.  Tried every hp online help's - none worked - out of warrentry as on mar this year. 
    This question was solved.
    View Solution.

    Thanks - the replacement printer is being shipped -- this is a known problem for HP - and they have extended the warrantee for this product due to the black print head problem..

  • My HP Deskjet Ink Advantage 2515 is not working

    Hi, Good day! I am from the Philippines,I have a HP Deskjet Ink Advantage 2515 All-in-One Printer. I tried to copy or scan a document however I did not succeed. I replace the ink, but still no luck. The Power light, Attention light and the Media error indicator are all fast blinking. I tried to Turn the printer off and then on again (after 60 or more seconds) but the issue still persist.
    Please assist.

    Just an update, the printer won't respond to any manual command (scan or copy). Once I press one of the said buttons the power button will just blink (which indicates that the printer is busy). I connect the printer to different laptops (one WIn 7 and one Win XP) but they can only see the ink status of the printer. All transaction like printing (no output whenever I print), scan (error in communication whenever I tried too). Last week everything is working fine. 
    jrleviste wrote:
    Hi, Good day! I am from the Philippines,I have a HP Deskjet Ink Advantage 2515 All-in-One Printer. I tried to copy or scan a document however I did not succeed. I replace the ink, but still no luck. The Power light, Attention light and the Media error indicator are all fast blinking. I tried to Turn the printer off and then on again (after 60 or more seconds) but the issue still persist.
    Please assist.

  • HP Deskjet Ink Advantage won't perform printing and scanning

    Good day,
    I have HP Deskjet Ink Advantage 2515. While I'm scanning a document yesterday, there's an error saying:
    "Scanner communication cannot be established. Ensure your product is powered on, check the connection, and  ensure your network is functioning properly. If these conditions are correct, restart the product and try scanning again."
    I've checked all the possible errors yet the error keeps coming back.
    One more thing is when i'm printing a document, it says that the Device is busy though i'm not performing any action.
    I've tried restarting my computers and used other computers to find out what's wrong with my device.
    Hope you read my concern as soon as possible.
    Thanks and good day again.

    Bump.
    Just want to know if someone can help me with my case?
    Thanks.

Maybe you are looking for

  • SDK Credentials -

    Running IAS Rel 2 (10.1.2) on Windows XP to try out Content Management SDK. Database is on linux server. From IAS home I click on the CMSDK link and it takes me to a page prompting for credentials (details below). According to the installation manual

  • Alpha Server for database

    Alpha server upgrade We are switching from an Alpha architecture to an NT architecture for our Developer Suite and moving from 7.3.3.4 database to 9i.1. We currently have an entirely web-based system using Developer and Forms exclusively via an Oracl

  • Getting a DisplayObjectContainer name

    Hi to Eone, I'd like to know if is possible to trace the name of a container object using the contained object. Something like: mc1 = new Movieclip(); cont1.addChild(mc1); trace ("container object is: " + mc1.function_I_need()); OUTPUT container obje

  • A java http server?

    Do any of you guys know about a (preferably open source) HTTP server? What i want to do is save a pdf form's data to disk. Adobe's javascript does not have the ability to save data to disk so the simplest(?) solution is to post the data to a http ser

  • 4GB Camera Memory Card won't download-Does nothing

    My camera memory card does nothing when I insert it into my computer.  It always worked before.  I don't understand why it won't now. How can I fix this issue? I insert the memory card and nothing happens.  Is there a driver I can download? Please ad