Deskjet pro 970Cxi

HP Deskjet 970 Cxi Heeft 2 maanden in Koele kamer werkloos gestaan, Weer in gebruik genomen met de houten pen Bijna Volle cartridges.
na 1 vel keurig kleuren Geprint, Gaat bij het opslaan: Probleem met zwart cartridge - this licht gereinigd voldaan zacht doekje.
Statuslampje Houdt op met knipperen.
Printer Weer aangezet en nu Gaat kleurencartridge in de opslag, also licht schoongemaakt, Maar nu blijft 'statuslampje knipperen, also na herhaald Reinigen. De printer Blijft onbruikbaar.
Heeft iemand Een herkenning of this Probleem.
In de Handleiding Staat dat dan Nieuwe cartidge Moet Worden Geplaatst, Maar this is Nog Weinig Gebruikt en alle 3 de kleuren Geven af, DUS Niet verstopt.
gaarne Uw advies.

Hi @abctje ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
Thank you,
George
I work for HP

Similar Messages

Deskjet pro 8000 goes offline

Product name & number: HP DeskJet Pro 8000 CB092A (A809a)
Operating System: Mac OS X 10.6.8
Printer started taking ages to complete power on self test (anything from 5 to 20 minutes). Then, despite having installed a new black ink cartridge, black was very streaky. Bought and installed a new print head (yellow/black) then after the lengthy POST printer attempted to print the alignment page. Approx half way through printer utility reported that the printer had gone off line and ALL the front panel lights on the printer were flashing at about 5Hz i.e. very rapidly. Only way out of this situation is to cycle power. Then, once power is restored, the cycle repeats ad nauseam ...
Printer utility does not report any status for the K/Y printhead only the M/C one. This was true before I replaced the K/Y head. Also, having replaced the Cyan & Magenta cartidges VERY recently they are being reported as almost empty. Where has all the ink gone? Certainly not onto any paper!
Having followed the HP trouble-shooting page for this printer the next thing to try is 'service the printer' which, I'm informed, is out of warranty.
So, do I heave the heap of junk in a skip and buy a Canon or Epson or is there a way forward which isn't going to cause me to become insolvent? I have all new ink cartridges on the shelf which I'm reluctant to install as I may, just, be able to get a refund on.
Dissatisfied ...
This question was solved.
View Solution.

Hmmm...
This whole issue has come to a head. I removed the paper tray and duplex unit to have a really good look for paper fragments in the path. I tipped the printer backwards to have a look at the under side to see how easy it would be to take the whole shebang apart. Ink started pouring out of the well on the right of the printer under the extra cover. I'd noticed that there seemed to be an inordinate amount of ink in there but was surprised at the volume which poured out over the chair I'd placed the printer on and the floor! So I now know where all the ink had gone from two 940XL cartridges!!!
I have so much invested in supplies for this printer that it is actually cheaper for me to buy a new DeskJet 8000 printer than switch printers. After all this example lasted me 3 years so at sub £150 it is almost a 'disposable' item. In the case of the old one it actually is disposable as the inside of the printer is now saturated with ink.
Ah well...

Wired Ethernet Deskjet Pro 8500 failed after Windows 8.1 upgrade

Following an upgrade to Windows 8.1 my ethernet wired Deskjet Pro 8500 A909g disappeared from my installed printers. This printer/scanner had worked successfully on this computer under Windows 8.
I have tried several suggestions including uninstalling all HP software and starting over with a fresh install. I can see the printer on my network by using a browser and going to the printers web address. I have downloaded HP's Print and Scan Doctor and can see the printer on the scan conducted.
When I download the latest HP Officejet Pro Full Feature Software and Drivers, Version14.8.0, and run it, the setup cannot see my printer on the network. When I select the choice of a wired network setup, the software searches for a device then returns to selection screen. If I select a wired ethernet setup again the same cycle repeats.
I have gone through HP Solutions for Install Errors (Windows 8) Troubleshooting wizard without finding a solution. Once, during my efforts I successfully installed this printer using an USB cable, but this is not the solution I desire.
This printer is successfully installed on a second Windows 7 computer on the same wired ethernet Workgroup.
Are there any solutions available?

I have patiently waited a week for any suggestions but have heard nothing. I have searched the forums and support sites without finding a working solution. I have purchased and successfully used many HP products both at home and in business for many years. This incident is discouraging and does not speak well for HP product service. Is anyone listening?

Beeping Noise - HP DeskJet Pro 8500

My new 8500 DeskJet Pro 8500 makes a beeping noise when it goes into the energy savings mode.
The on/off button flashes and the beeping noise begins.
Is this normal and is there any way to stop the beeping noise?
Thanks,
This question was solved.
View Solution.

You guessed it!. I was going to get back with you but you responded before I could.
The goober that I am :smileyindifferent: found that I had disconnected a cordless telephone that I had used with my Dell AIO 962 for faxing and I had it sitting along side of my new printer. During the night the battery on the phone run down and it began to beep. Needless to say therein lied the problem!!.
Boy do I feel like an idiot...............phone battery removed...............no beep.

Officejet Pro 8500 a909g software won't install in widows 8

I have a HP Deskjet Pro 8500 a909g printer. It's worked great on XP and windows 7. On Windows 8 I can get the printer drivers to install, but not any of the HP software. I have done a L4 uninstall, stopped all the TSR non-windows applications, cleaned all temp files/folders, disable the firewall and anti-virus and downloaded the version 14.8.0 Product installation software. When I execute the Product installation software, it completes the "extraction", then simply disappears. The app is still running, because I can't delete the file, but no screen or window comes up.
I have also tried the Install wizard and the HP Print and Scan Doctor, both failed saying they don't support this device after processing through the first 3-4 steps.
Has anyone successfully installed this software on Windows 8? Any help or thoughts would be greatly appreciated.

Hi pepps
I understand you are unable to install the printer on the Win 8.
The downloaded driver goes to the downloads folder, try and run it from there.
In our lab this where it extracted to but yours might be different.
Go to desktop, touch windows key and x key, select file
explorer, downloads folder. Double click it to run the
extracted file. (ojaio6500e709fullwinww140)
Run extracted file separately.
Go to desktop, touch windows key and x key, select file
explorer, c:, users, your computer name, app data, local,
temp 7zs4d1a, (Officejet 6500) open the setup.exe to run
the installation.
Let me know if that works.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp officejet pro 8600 scan to windows 8 computer

can anyone out there assist, attempting to get my hp officejet pro 8600 to scan to my windows 8 computer?

Ron,
I am having a similar problem.
My printer is on the network, I've installed all the software (full feature), but I can't seem to find where you guys put access to the 'control pannel' where I can print, scan, etc... directly from my laptop.
It popped up after installation of the software, but when I closed it I expected to have a desktop icon, or sys tray access. I can't find a way to open up that control pannel again. I have the all in onwe deskjet pro 8600.
Help? Thanks,
H

Scannner sacans but pages are missing HP DESKJET 8610

When I scan or fax documents there are several pages mising, the page count is correct but in the preview they are missing. Please Help. Also when I scan threw document feeder pages are skipped. HP DESKJET PRO 8610
I have uninstalled and reinstalled the software and I am still haveing problems. I ran the scan doctor program with no luck.
This question was solved.
View Solution.

Hi @Scrimpy ,
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can't find the eFax app on my HP Officejet Pro 8500A

Can't find the eFax app on my HP Deskjet Pro 8500A. At the eFax Webside only the eFax Plus and Pro services are available.
Does the free eFax service not exisst anymore?
Cheers
Michael
This question was solved.
View Solution.

Hi Michael,
The eFax service is not available for any printer model.
The only models currently support the eFax App are HP Photosmart C510, HP ENVY 110 and HP Photosmart 7510.
Additionally, the eFax App was never provided for any All-in-One containing a physical analog fax card.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have a new iphone5 and want to use imessage to connect devises

I have an iphone 5 , and ipad and a Macpro . I love the fact that I can use imessage and icloud to sync these devices . I have everything all set up but am running into one problem with my iphone5 .... I cannot receive text messages from other iphone users on my iphone ... they show up on my Macpro and ipad but not my iphone . I can send and receive text messages from non iphone users and send text messages from my iphone to other iphone users but I am not receiving them on my iphone . I get them only on my ipad and Macpro ... any answers for this ?

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

Borderless Printing Problem

Windows XP Pro, Indesign CS3, HP K8600 Deskjet Pro Printer. I am trying to print a borderless document. Printer does have borderless feature. I cannot get the document centered. A quarter inch white border appears on the right side of the document and a half inch border appears on the bottom. . Settings I am using in the print setup are as follows: Paper size "Borderless 8.5X11"; Page position "Centered"; also tried Page position "Upper Left"; Printing Shortcuts "Borderless Printing"; Under Features tab "Borderless 8.5X1", "Print Actual Size" and check "Bordrless". Document will print borderless and centered in HP Photosmart application but not in Indesign so I don't think it's a printer problem.

It's the top item on the Paper Size menu-drop...
I think that's your only way out because "borderless" printing is essentially unsupported by InDesign and sort of defies its logic.

Printer wakes me up!

I have a new HP Deskjet Pro 8620, and the touch pad/display periodically lights up all by itself, seemingly for no reason. Unfortunately, the printer is in our bedroom, and the display creates a glowing light in the corner of the room, which can be distracting when we're trying to fall asleep. Does anyone know why the display activates/lights up by itself and how I can prevent it? I've tried disabling auto updates, but that doesn't help.
Thanks

Hi Runner01,
I can't say for certain what is causing the display on your 8620 to activate and light up. There are a few possible causes. It could be that a call comes in and if the printer is connected to the fax line (the same line as the phone) it would activate. It could be general maintenance engaging the printer display.
Despite my not knowing what is causing the issue, I do have a solution to possibly resolve the issue. On the front panel of the printer, you can touch ECO, then navigate to Schedule On and Off, the set a time for the printer to turn off and a time for it to turn back on.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro. What do I need to do?

I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro. I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher. What can I do to update the operating system on my Mac Book Pro?

10.5 will be harder to find & more expensive, I think I'd go for 10.6
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Apple no longer has it for sale.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

I have an HP Deskjet D4200 series printer that ised with my iBook G4. I would like to use it with my new MacBook Pro that I just purchased. Is there anyway to do this? When I try to install the driver using the CD, I get the message, "can not open the

I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top. When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported. I am not sure what all that means but is there any way to use this printer with my new computer?
Thanks

It would help to post this in a more proper form. This is for the iTunes family of stores.

Deskjet pro 970Cxi

Similar Messages

Maybe you are looking for