Desktop and mouse jumping during startup
When starting the computer, the screens and mouse jump all over the place and switches screens.
I have a Powermac G5-I only have in the computer what was factory installed. The computer is a little over 5 years old. The problem started after I booted up and logged in. My desktop and pointer were frozen. I could not escape and I tried to shut down doing a force quit. No Luck. I eventually had to unplug the computer from the wall. Upon restarting the computer, when it came on, all I got was a gray screen with the Apple logo. After about a minute of this, The internal cooling fans would come on full blast. I also tried booting from the start-up disk (I had to install the disk manually, because the drive would not respond to the key command) with no luck. I have taken it to the Mac store. Their conclusion was it could be the motherboard or the CPU's, but they weren't certain either. Do you think it could be possible that it's not the CPU or Logicboard? The expense for replacing both, almost doesn't make it worth it. Any ideas?
Similar Messages
-
Desktop G5 shuts down during startup
Just sold our Desktop G5 to my in-laws. (It has always worked well for us.) Put 10.4 on it and everything has run just fine for a couple months. All of a sudden, it turns off during startup. It tries to restart, probably because I put the settings to restart in case of power outage. It sometimes gets to the desktop, even starts to open some applications as usual. Then other times it turns off during startup, only getting as far as the gray apple startup screen. We have changed everything we can such as different electrical outlet. (grabbing at straws.)
It did have a cd in it but when managed to get it out. This had no effect on the problem.
Also tried resetting SMU, with no effect on problem. Also held down option to get to chose startup disk while the 10.4 cd was in drive, but still does the same thing. Held C down too to force it to cd but did not work....same problem.
Thanks for your help.I have a Powermac G5-I only have in the computer what was factory installed. The computer is a little over 5 years old. The problem started after I booted up and logged in. My desktop and pointer were frozen. I could not escape and I tried to shut down doing a force quit. No Luck. I eventually had to unplug the computer from the wall. Upon restarting the computer, when it came on, all I got was a gray screen with the Apple logo. After about a minute of this, The internal cooling fans would come on full blast. I also tried booting from the start-up disk (I had to install the disk manually, because the drive would not respond to the key command) with no luck. I have taken it to the Mac store. Their conclusion was it could be the motherboard or the CPU's, but they weren't certain either. Do you think it could be possible that it's not the CPU or Logicboard? The expense for replacing both, almost doesn't make it worth it. Any ideas?
-
Keyboard and mouse events during screen sharing
I use OS X 10.6.8, my mom has 10.5.(8?).
Screen sharing used to work fine. I am always viewing her screen.
Lately, none of my keyboard presses or mouse clicks make it through the connection to her machine. I can 'influence' but not really control the placement of her cursor as viewed on my screen. She never sees the pointer move from wherever it was before I started trying to move it. I can see her screen fine, and even see some frame rate if she plays a video from an email message (but I don't get the audio stream). We can't continue talking while the video is playing though because our voice connection has too many dropouts.
She did change from using Comcast to using AT&T Uverse several months ago. I can't remember exactly when the troubles started, but it could have been at the time of that switch. She is getting a lower speed connection than she used to.
Are these issues strictly a problem of a too-slow connection, or is there something else to try. I'm most concerned about the keyboard and mouse loss, since that means I have to describe every action to her instead of doing anything myself. I can live without viewing videos over a screen sharing link...Hi,
It is worth doing Speed check at both ends
http://www.speedtest.net/
It may also pay to open the Connection Doctor (Video Menu) during a Audio or Video chat and checking the Bit rate and Framerate (on Video).
iChat in 1-1 Video needs "Real World" speed of 256kbps (it will manage according to Apple at 128kbps).
This Min of 128kbps is the min for Screen Sharing as well.
The Connection Doctor will show you what iChat is using (your Bit rate) NOT what the Internet Speed is measured at.
It will be closer to the Upload Speed you have.
iChat will tend to settle closer to the slower speed of whichever Buddy has the slowest Upload (plus a margin for variances in the ISP's feed/service)
If the variances in the Internet Speed from the ISP varies too much then iChat will have difficulties.
It will drop Audio (As far as you as concerned) as it will start dropping frames to smooth the video out.
For this reason it can pay to go to iChat > Preferences > Video Section and try the Bandwidth Limit at 500kbps (If for instance you have a 10Mbps Upload a 5% variance can be a whole 500kbps)
With both ends at 500kbps you can be below the Variance factor.
Try 200kbps if there still appear to be problems.
NOTE:-
iChat's responses are determined by the Internet Speed (Or at least the portion that computer is getting = Bandwidth) and what else the computer is doing.
Depending on the Mac and it's Processor and the apps running at the time iChat may not get a decent use of the Processor. (It is set to use it "last" a it were so Downloading, Playing Video elsewhere, or setting background tasks (Anit Virus scans, iMovie Rendering) may impinge on free Processor cycles).
Try to eliminate as much as possible.
<
9:19 PM Tuesday; July 19, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hide windows desktop and mouse
Hi,
I need to hide the mouse and the desktop, including the fine white line that is left after manually hiding the taskbar. In other words, I need the front panel to completely fill the screen.
I am using Evaluation LabView 6.0.1 on Win98.
Thanks,
YossiHi,
To make this work, the taskbars 'auto hide' option must be disabled!
Regards,
Wiebe.
"AIR" wrote in message news:a5fj3m$b1e$[email protected]..
> Hi,
>
> This will explain the hiding if the taskbar:
>
> First, you need a hWnd (window reference) to the taskbar:
>
> Use FindWindowA. The class of the taskbar is "Shell_traywnd", window name
is
> "".
>
> Use SetWindowPos to set all positions to '0', exept the last one (uFlags).
> Use 0x40h and 0x80h to show or hide the taskbar.
>
> Regards,
>
> Wiebe.
>
>
>
>
> BTW:
>
> BOOL SetWindowPos(
> HWND hWnd, // handle to window
> HWND hWndInsertAfter, // placement-order handle
> int X, // horizontal position
> int Y, // vertical position
> int cx,
// width
> int cy, // height
> UINT uFlags // window-positioning options
> );
>
>
> HWND FindWindow(
> LPCTSTR lpClassName, // class name
> LPCTSTR lpWindowName // window name
> );
>
> Both are in User32.llb
>
>
> "Yossi Zana" wrote in message
> news:[email protected]..
> > Hi,
> >
> > I need to hide the mouse and the desktop, including the fine white
> > line that is left after manually hiding the taskbar. In other words, I
> > need the front panel to completely fill the screen.
> > I am using Evaluation LabView 6.0.1 on Win98.
> >
> > Thanks,
> >
> > Yossi
>
> -
my kids computer began acting up this spring...so I shut it down.
Would not stay turned off, various noises almost continually, jumping highlights, etc.
Decided to reinstall os x snow leopard. insert disc and icon appears. then 3 icons with x in a column.
automatically highlights middle icon and will not allow me to select one above. Says install xcode.
not what i want to do.
any help?What model iMac do you have?
What version of Mac OS is it running? If you don't know, try to give approximations on when it was set up and whether it was ever updated so we can take our best guess.
How are you trying to boot from the install disc? Your description of 3 icons with x in a column' leads me to believe that you aren't booting from the install disc, but rather you are inserting the disc after booting from the OS that is installed on the hard drive. If that is what is happening you'll see something like this, although it will vary depending on the actual version of the Install Disc that you have and how you've chosen to view the files (icon, list, column, etc).
What happens if you restart the system with the Install Disc inserted, then quickly hold down the 'c' key so that the system attempts to boot from the Install Disc. Do you still experience the same issue? -
UCM Server libraries and application failed during startup
When i am going to start UCM_Server managed server (a instance of UCM) from Administrative Console, server started but application startup failed. Similarly, when i start this server using startManagedWebLogic startup script, server as well as applications started without any error. When i see log, I found following errors:-
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "Web Services Startup Class", java.lang.ClassNotFoundException: oracle.j2ee.ws.server.WebServiceServerStartup
java.lang.ClassNotFoundException: oracle.j2ee.ws.server.WebServiceServerStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
java.lang.ClassNotFoundException: oracle.ias.cache.Startup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:37:37 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Apr 7, 2011 4:37:37 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Apr 7, 2011 4:38:07 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'DMS Application [Version=11.1.1.1.0]' due to error java.lang.NoClassDefFoundError: oracle/dms/http/Request.
java.lang.NoClassDefFoundError: oracle/dms/http/Request
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1017)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: oracle/dms/http/Request
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1017)
Truncated. see log file for complete stacktrace
>
When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
<Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\oracle\Middleware\Oracle_ECM1\ucm\idc\components\ServletPlugin\idcnativews.war. Please make sure that the annotations are valid. The error is oracle.dms.wls.DMSServletFilter>
<Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle UCM Native Web Services' due to error weblogic.application.ModuleException: Failed to load webapp: 'idcnativews.war'.
weblogic.application.ModuleException: Failed to load webapp: 'idcnativews.war'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\oracle\Middleware\Oracle_ECM1\ucm\idc\components\ServletPlugin\idcws.war. Please make sure that the annotations are valid. The error is oracle.dms.wls.DMSServletFilter>
<Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle UCM Web Services' due to error weblogic.application.ModuleException: Failed to load webapp: 'idcws.war'.
weblogic.application.ModuleException: Failed to load webapp: 'idcws.war'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: AttachmentsAuthorization, Specification-Version: 1, Implementation-Version: 11.1, referenced from: D:\oracle\Middleware\user_projects\domains\ucm_domain\servers\UCM_server\tmp\_WL_user\Oracle Universal Content Management - Content Server\tqwlmw]. Make sure the referenced optional package has been deployed as a library.>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle Universal Content Management - Content Server' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:176)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@35146290[app:wsil-wls module:/inspection.wsil path:/inspection.wsil spec-version:2.5] oracle.dms.wls.DMSServletFilter.
java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'wsil-wls'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@35701572[app:Oracle UCM Help module:ocsh path:/_ocsh spec-version:2.5] oracle.dms.wls.DMSServletFilter.
java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'Oracle UCM Help'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
<Apr 7, 2011 4:38:13 PM GMT+05:00> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Apr 7, 2011 4:38:14 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "Audit Loader Startup Class", java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Truncated. see log file for complete stacktrace
>
Its look that libraries are not in class path when i start from the administrative console. What do you suggest? and How we can solve this problem?
Regards,
ImranSolution: Node manager issue, Node manager incorrectly configured,
run
$ ...oracle_common/common/bin/setNMProps.sh
Then run the node manager start script.
Other configuration may also be necessary:
append | *.*.*.* to the incoming socket c.a.s.f for UCM in the em configuration web app ( http://IP:7001/em).
Edit: above should red | star.star.star.star where star="*"
Edited by: 849176 on 11-Apr-2011 01:06 -
Whenever I move around the desktop with the trackpad, it starts opening up rectangular boxes and highlighting icons inside the box. Also, when I move around web pages, things get highlighted without my intending to highlight them. What is ?
The problem continues in the new administrator account. When I first go to the desktop, I can move the cursor with the trackpad in a normal way but once I click on the desktop the cursor becomes very sticky and draws boxes, highlights icons, and drags icons. Also, I can't pull down the toolbar list of "old favorite" sites.
-
I couldn't find an answer to this anywhere.
Will the lack of EFI prevent me from choosing which OS to boot into (due to no bootup screen)?
Does Apple have a workaround for this?
Also, is my Mac Pro (Quad; 4,1; 2009) compatible with the whole line of Geforce GTX, provided I have the "magic" drivers?
(I need to use OS X for music and 2D graphics (Pro Tools, Adobe), and the Windows side for game development with Oculus DK2)Thank you! Great advice.
I think I'm giving up on this, though. Only few card models are supported on the Mac Pro (with or without EFI firmware flash), and it's too much of a risk it won't even work at all if I don't buy the exact overpriced/outdated chipset supported. Apple hardware support is terrible, and information on workarounds to that lack of support are nonexistent. I wish I could make this work, but it's cheaper and easier to just get a cheap AMD with great graphics for all 3D/rendering projects. -
how do i get my older mac to allow norton to update virus definitions...error says i need to startup with 32 bit kernel but i tried it and still can't do it (i held 3 and 2 down during startup per Apple.com instructions)
I meant to include this info from the System Profile:
Maybe easier to read:
Canon MF4400 Series:
Status: Idle
Print Server: Local
Driver Version: 1.1.0
Default: Yes
Shared: Yes
URI: usb://Canon/MF4400%20Series?serial=0122F5200302
PPD: Canon MF4400 Series
PPD File Version: 1.1.0
PostScript Version: (3010.000) 550
(3010.000) 651
CUPS Version: 1.6svn (cups-327)
Scanning support: Yes
Scanning app (bundleID path): -
Scanning app version: -
Scanner UUID: 00000000-3031-3232-4635-323030333032
Printer Commands: none
CUPS filters:
capdftopdl:
Path: /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl
Permissions: rwxr-xr-x
Fax support: No
PDEs:
BasicSettingsPDE.plugin:
Sandbox compliant: Yes -
Security Agent is suddently appearing during startup and on my desktop
Hello,
So recently, during startup while my login/password page is loading, I'll see "Security Agent" appear in the upper left corner of my screen. Then ususally, maybe a half hour to an hour after I've started up, it appears on my dock, running. I can quit from the dock that's the only option I have. It will usually reappear randomly after that throughout the day.
Anyone have any ideas of what this is all about?
thanks,
TuckyHello,
Actually "Security Agent" is part of the OS. Here's a apple developers page explaining. http://developer.apple.com/documentation/Security/Conceptual/SecurityOverview/Architecture/chapter_2_section5.html
I just don't understand why a normally invisble operation is suddently appearing out in my desktop.
You can read my computer stats below. But in case you can't I'm on an aluminum power book running 10.4.7
thanks -
Unable to send keystrokes and Mouse strokes in during WinPE phase with iDRAC7
Primary Site running SCCM 2012 R2
Unable to send keystrokes and Mouse strokes in during WinPE phase. The system is awaiting response "password" on Task Sequence step however the machine won't accept keyboard and mouse inputs. This happens with iDRAC7 Version1.0.
Trying to image Dell servers with SCCM 2012 R2. The desktops work fine and able to image.Download and install iDRAC7 firmware to revision 1.57.57 or later.
-
My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve
Any one can help meThank you for your response - I'll give it a go.
Also, just to update, my iMac cursor seems to glitch a little bit less now. It seems that at least ONE of my problems may have been caused by sitting my iPhone upon my WACOM tablet. The tablet must receive some sort of disruption from having my phone on it - and removing it seems to remedy a fraction of my mouse-jumping problems - if only for a meanwhile.
The mouse cursor still does jump around on its own occasionally, and the other mouse problems do persist - so this must not be the only culprit for my array of problems. -
Controlling Startup Using the Keyboard ande Mouse
In answer to an earlier post, I was given a method for switching startup disks at startup via the keyboard. Hold the control key down while starting.
That particular startup key combination is not among the listed combinations in the apparently incomplete article on the Apple support site: Mac OS X keyboard shortcuts:
<http://docs.info.apple.com/article.html?artnum=75459>
Go figure. How many others did they leave out, I wonder... holding the mouse button down on startup to open the CD drive is not listed, either.
Does anyone have any idea where there is a complete list? TIAHi, Roger!
Some keyboard shortcuts aren't universal and don't work with all Mac models, like the Startup Manager (Option key during startup). Perhaps some commands were intentionally omitted from that particular listing for such reasons, rather than being unintentionally missed.
Here are more/other key commands, if you're interested:
http://davespicks.com/writing/programming/mackeys.html
Gary -
How can I get mouse pressed and mouse released positions on the desktop whi
Hello All,
I am generating a Frame using Swing API. My requirement is I need to capture the mouse pressed and mouse released positions, whenever user drags the mouse on desktop region (i.e. outside of the Frame). I require these points to find the rectangle region user has generated starting from mouse pressed to mouse released position. I need to pass that rectangle to Robot class in order to capture that desktop region.
Can anybody help me out how can I achieve this using java on MAC, Linux and Windows platforms?
Thanks in advance.
Regards,
VPKVLVPKVL wrote:
DarrylBurke wrote:
Can't be done in Java.I don't think that there is something which can't be done using java. When searched over net, found few applications which are using java for implementing this feature but not free, asking for license fee. I checked by downloading the demo version.
Just want to know the hint how it can be achieved so that I can move further on that lines.
Your thoughts ?They use JNI with the OS API. -
Desktop and startup shortcuts produce security warning
I have a laptop running Windows 8.1 Pro with all updates installed. It's a domain member and the primary user was using redirected folders which worked well. Due to other reasons, the user's account was removed from the OU linked to with the redirected folders
GPO. open file security warning The GPO was setup for Desktop and My Documents so that when the policy was removed the files would revert to the local PC. For some odd reason the Favorites was not that way but configured to leave them on the server. I discovered
that only after the user's account had been moved out of that OU and the laptop rebooted and the user logged in.
So the user got her desktop and documents folders back just fine. But even though I changed the GPO to revert the Favorites back to the local PC of course it didn't even after I rebooted a few more times. So when the Favorites icon in IE was clicked,
favo0rites were still pointing to the server. I had to go through the registry and change the entries for that user's profile to point to the proper folder on the local PC.
However after I did that then something else showed up. Now when she clicks on the IE shortcut which is pinned to the taskbar or any application shortcut on the desktop or when she logs in and the startup program run, they all produce the Open File - Security
Warning box so she has to click OK for each one. I've tried looking up this problem but none of the fixes work for this case or I'm not going to lower the IE security.
Oddly, the Microsoft Office shortcuts pinned on the taskbar don't produce the security window but open up the program. It only seems to happen with shortcuts to programs that I create. Also I can take those shortcuts, copy them to another folder outside
of the user's profile and there is no security warning. So it's only within the profile that this happens.
Anyone have an idea what is wrong and how to fix it? I don't see how my changing the path to the Favorites folder in a few places in the registry could have done this but I don't see what else since it didn't occur until after I made the registry changes.
JonathanWhy not use RegShot to capture registry changes after favorites folder was modified.
Maybe you are looking for
-
Mac Book Pro (Mid 2010) is no longer recognized the external monitor since Lion update.
Mac Book Pro (Mid 2010) is no longer recognized the external monitor sinceLion update. On Mac OSX 10.6, I had no problems. Mac screen is just blue, as if he switches. But then there is no further signal. What can I do?
-
Updating to iPhoto 9.5.1 lost all my photos. How can I retreive them?
Updating to iPhoto 9.5.1 lost all my photos. How can I retreive them? I'm on a MacBook Pro using OS X version 10.9.5. When I attempted to edit a photo in the version I had at the time, I got a message that I must update to iPhoto 9.5.1 to use that fu
-
Glue 4.1.2 and weblogic7.0.4 problem
Hi all, I am having a problem to start my war that uses glue 4.1.2 on weblogic7.0.4. Glue.jar is contained inside of our war. Below is the error message I saw at start up. It says the server is in RUNNING mode, but wsdl files cannot be loaded from th
-
I wrote piece of code to open universe, it works in XI3.1(12.1.0.914) but did not work in XIR2(11.5.0.0). the code is: #import "designer.tlb" Designer::IApplication* mApp; Designer::IApplicationPtr lApp(__uuidof(Designer::Application
-
How to get my accounts pane in System Preferences to open.
The accounts pane of System Preferences won't open it simply loads and then System Preferences quits. I have repaired disk permissions many times but it hasn't helped. I don't have the reinstall disks to fix the computer. What can I do?