Desktop background not saving

Hey guys, I have a new model Mac Pro with dual monitors. I have a different desktop background image on each monitor. Every time I reboot or shut down and start my computer up again the desktop background that was on the right monitor moves to the left and the right monitor reverts to the red/orange canyon picture (one of the apple default pics). How do I make my backgrounds stay? Is this a known bug that apple is working on or am I alone?
As a note both of the desktop background picture files that i am using are stored in my pictures folder.
Help would be appreciated!!
Thanks
-JM

Yup. Can't figure out the issue. I've verified permissions using disk utility. Not sure why this is happening. Don't like that it's happening but at least i'm not the only one. Makes me feel a little better.

Similar Messages

Desktop setting not saving after system update

Hi All,
I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
not saving my desktop setting. I have the "automatically save session on logout" check.
I am using xfce4 as my DM
any help please.

hi,
check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files

Desktop Backgrounds not working properly in Aperture/Mountain Lion

If I set my desktops with the default Apple backgrounds, all works well. I can log out and back in and the backgrounds are retained.
If I use the "change desktop background" dialogue box and set the backgrounds to photos from the Aperture library, when I log out and back in, all the backgrounds have reverted to the standard Mountain Lion background.
If I open Aperture (in Desktop 2) and select a photo, I can do File/Share/Set desktop and that will change Desktop 2 (but none of the other desktops) to the current image. THEN if I restart, desktop 2 will have retained the background I've chosen.
I've spoken to the Apple tech support, but only the Mountain Lion people can help me. They tried repairing permissions, terminal commands and all sorts but it didn't work.
The guy on Aperture support sent me some standard articles but nothing specific, and as my copy of Aperture is more than 90 days old he can't help any further. I am running the latest version, 3.3.2. I've done all the basics like rebuilding the library and repairing permissions etc... I've deleted the aperture preference file, and the desktop preference file. All to no avail.
Anyone help? Please!
Thanks,
Mark

Success! Well sort of. I went into Mission Control Preference Pane (in System Preferences) and fiddled about with a few ticks. The one that seemed to make the difference was the one called Show Dashboard As A Space. Make sure it's ticked. This is a bit of a bummer if you want multiple desktops with different personalised photo backgrounds but you don't want the dashboard as a space. It's still a fault Apple! So if someone finds this solved their issues then please don't mark the post as "this solved my problem", maybe just "this helped".
Because the issue is not resolved for those who don't want the dashboard as a space - those people can only have Apple's own backgrounds on their desktops! And it is worth point out that without the Show Desktop As Space box ticked, even with Mission Control set to just one background, the Aperture photo would not be reatained through log out and restart etc. AND the actual Desktop/Screen Saver preference dialogue box didn't work properly, taking ages to select a picture and the picture not changing on the background itself until the user threatens to exit the box. As I say though it all went swimmingly with the Show desktop as space box ticked.
Dear oh dear Apple, with every step "forward" you take there's always the odd lurch backwards into the murky days of Windows 1.0!

Desktop graphic not saved on new Mac Pro running OSX 10.9.2.

On every reboot the photo displayed goes back to the original ocean wave that comes with the machine.
My selected photo shows as long as aI don't reboot.

place the picts in a folder within the photo folder.

Thin white lines on desktop background

After having my computer on for a while, one or two thin horizontal white lines will appear on the screen. They are around a few inches long, and never appear in the same place twice. They only affect my desktop background, not any windows or screen saver at all.
Reloading the desktop background or restarting the computer makes the lines go away, but I'm wondering what is causing them, and if it's a sign of some underlying problem.

Insert your MacOSX DVD
reboot while pressing ALT key
when icons appear on the screen select Apple Hardware Test and run extended test.
Perhaps a video memory problem. If yes motherboard is dead !

Not able to change the desktop background

I have a MAC 27inch MID 2011
OS X 1O.8.2
The problem is when I try to change the Desktop Background is says loading images,the mouse pointer has now changed to a revoling disc and I am unable to select anything ,for me to get out of it I need to force quit the System Preferences Icon on the Dock.
Please can someone help
Thank You
alligator

Hi paulheu
It is not the question of first time posted or second time posted. Whther the issues are genuine or not?
I have checked with othe Lumia 800 also observed same issues.
Do you think that this is the low end phone?
Whatever the issues i have raised all those are very basic requirements. And for your information those are available in normal ordinary phones (symbian os phones).
This is the smartphone having Rs.13000 cost. and i give extra care & respect to my phone.
How can you say that without any homework did i raised the question?
Whatever i mentioned the issues those are only i faced. I think lot more which i have not used/ observed.
And finally could you pls tell me what are the issues are not generally true?

Some iphoto pictures not usable as desktop background

I want to set my desktop background as a slideshow of my favourite iPhoto'08 pictures. While experimenting, I've discovered that some of my iPhoto pictures don't seem to work as a desktop background.
Here's what I do (and note that I'm translating from a Swedish version of OSX here):
Right-click on the desktop, choose 'Change desktop background'. In the 'Desktop and Screensaver' dialog, Desktop tab, scroll down the left-hand side list of iPhoto albums (among other things), and select my favourite iPhoto album (Flagged). Wait for the previews to load. Select one of the pictures.
Now, what happens can be one of two things. Either I'll see a slightly bigger preview in the left upper corner of the dialog and I'll see the desktop background change to the picture in question. Or I'll only see the slightly bigger preview in the left upper corner, and the desktop background will turn a boring solid color.
Now, iPhoto itself has no problems with these pictures, and shows them properly. Also, if I use the little + below the left-hand side list to add a folder on the harddrive directly to the list, I can get the broken pictures to show up correctly, as long as I don't go through iPhoto.
So, yeah, that gives me a potential workaround: Export my favourite album now and then, and use the exported folder as background slideshow source. I'd rather have a better solution, where things just work like they're supposed to.
The pattern I've noticed is that iPhoto-modified pictures work fine, non-iPhoto-modified pictures don't seem to work. (That is, if right-clicking on a preview in iPhoto has the menu item 'Show original file' active, the picture will work, if the item is greyed out, the picture won't work.)
A relevant detail in this may be that I've set iPhoto to not copy imported pictures into the library.
Any hints, clues? Now what?

Welcome to the Apple Discussions.
I think this relates to using a Referenced Library:
iPhoto-modified pictures work fine, non-iPhoto-modified pictures don't seem to work.
In other words, iPhoto will share the files it controls (the modifieds are inside the Library Package) and not the ones that it wont.
Simple test: Create a Managed Library (Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library', import a few pics and see if that works as expected.
Regards
TD

"Desktop & Screen Saver" settings not saving upon reboot.

"Desktop & Screen Saver" settings not saving upon reboot. Settings are always set back to factory default upon computer startup. Need help! Please!

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Desktop not saved

Hi,
Just restarted Lion and the layout of the Desktop has not been saved. This just started recently. any one know of a settling which controls this? I may have inadvertently chnage it. Any help appreciated. This is on my iMac. Running 10.7.2.
Thanks

I found solution here.
https://discussions.apple.com/message/15779186#15779186
Thanks!!!

Wallpaper not showing up in "Change Desktop Background" window

I just noticed an odd issue today on my Mac Pro. When browsing the built-in wallpaper folders (Nature, Plants, etc) in the Change Desktop Background window they are empty. My "Pictures Folder" one shows all the images correctly as well as browsing the ones from iPhoto. (I also have Aperture 2.1.2 installed but no projects yet so that part is empty.)
I performed a permissions repair, checked that the actual files were there in /Library and removed the com.apple.desktop.plist pref's file. After doing that all the pictures showed up again UNTIL I browsed around the picture folders in the Change Desktop Background window then they stopped showing again.
Could something in my Pictures Folder be causing the issue? Any ideas?
Thanks,
-Jim

Thanks for clarifying. I don't do right or left click, but occasionally do CONTROL-click and doing that brings up the contextual menu item "change desktop background" which leads to the Desktop prefPane. Now, why you're having issues, I have no idea. However, I suggest creating a new admin user account, logging into it, and seeing if changing the desktop picture works there.

Can not change my desktop background

for some reason when i changed my desktop background to a photo from my picture folder, i cant seem to undo it. i cant even get into the desktop and screen saver preferences. as soon as i click on the desktop preferences, a window pops up and says " the application sysyem preferences quit unexpectedly....... it then asks me if i want to reopen,report,or close." if i reopen, it goes through the same thing again. i also reported this to apple. i dont know if it will do anything, but owell.
is there anyway to reset this?
is the image that i chose for my background (jpeg) have something to do with this?
please, if anyone can help me with this, it will be greatly appreciated.
MacBook Pro Mac OS X (10.4.7)

i have had this exact same problem for quite a while now, i have tried niel's suggeston but that didn't work for me. i just put up with it and when i do want to change my desktop i open iPhoto select a picture and go share/desktop. but if someone has a better solution i'd love to hear it.

When I try to change my desktop background nothing happens

When I find a new image on the internet, for example with google images, and I attempt to change it to be the desktop background nothing happens. I attempted to save the file to the desktop or downloads and then set it to be the desktop background but again nothing happens. This has happened to me a couple of times and I am not sure what is causing it. When I restart the laptop the new background is set but this is really getting annoying.

No problem using PC terms with me. Most of my computer are Windows PCs. I'm fully versed on both platforms.
Well you are setting it to the desktop background. "Sorry" all you need to do is reboot to make it active.
Never done that and have no desire to try it. But I would think that if you Right Clicked (two finger click or control left click) on the image, selected Save As and saved it in the folder I pointed to in my other post or to any folder on your hard drive and then went to Sys Pref, Desktop & Screen Saver and selected that image, whether in the default desktop pictures folder or in another folder on your drive, it would change right then and there without a reboot.
Doing it from Safari makes you reboot to have it displayed.

Problem applying .CR2 photo file as desktop background

Hello-
I have been trying to apply a photograph taken in RAW as a desktop background image. The file is .CR2 and when I click done to set it as the background, the background does not change and the notice comes up that System Preferences has unexpectedly shut down.
Please help !
Thanks

I recommend saving the file in a more compatible format like .png or .jpg before trying to turn it into a screen backdrop.

Fitting a desktop background into my desktop screen

Hi.
Say i have a 1995 X 2993 picture that i want to fit into my desktop background. How do i do it?
Cos the options given in Desktop & Screen Saver in System Preferences are pathetic. It only has fill screen, fit to fill screen, center and tile. Which doesn't work the way it does. How do i edit this without altering the quality and size of the original picture?
Thanks in advance. I do reward points!

Yes. Do not uncheck the box at the bottom that asks for recalculating. ("bicubic" is okay for that purpose.) You might have to crop the picture after that to get the best part of it. Or you have to add some solid color as a background. Both can be done by using the canvas menu item.
To avoid color edges in the gradients you can use the "add noise" filter with 2% or 3%.
When saving it, use JPG with the best quality. Save it to the pictures folder in your home directory and you can choose it easily.
P.S.: The image dimensions you've given represent the worst case! It would be much easier to rotate the screen device!!

Safari 8 extensions are not saved

Hi,
on Yosemite with Safari 8 installed, extensions are not saved.
When installing extensions they work. However, when I restart safari the are gone. They are still in ~/Library/Safari/Extensions but not activated and not shown in the extensions tab in the settings.
Any ideas who to solve this issue?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing' '464843899 1233118628' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Desktop background not saving

Similar Messages

Maybe you are looking for