Desktop create fails with javascript error (unable to proceed)

When creating a new desktop from a portal template the action fails and the only error I can find is a javascript error.
The error in the browser when trying to create a new desktop from the portal.
<b>Error: unterminated string literal</b>
Source File: http://localhost:7001/FoundationAppAdmin/portal.portal
Line: 2710, Column: 28
Source Code:
ror(s) occurred during XmlDisassemblerContext parsing: Parser Error...
That corresponds to this code in the web page source in the portal admin tool.
function showUserErrorMessages() {
alert(unEscapeChars("- Error: The desktop could not be disassembled. [com.bea.netuix.application.transform.disassembler.XmlDisassemblerException: com.bea.netuix.application.transform.disassembler.XmlDisassemblerException: One or more validation error(s) occurred during XmlDisassemblerContext parsing: Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: Duplicate unique value [ID Value: bEarn] declared for identity constraint of element "desktop".
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Parser Error...
org.xml.sax.SAXParseException: cvc-complex-type.3.2.2: Attribute 'columns' is not allowed to appear in element 'netuix:layout'.
Message was edited by:
dallastx

When creating the desktop from a .portal file in the admin tools, the .portal file is parsed and validated before persisting to the database. It looks like this is failing and you are getting some fairly straight-forward messages. Check the format of the contents in the .portal file and make the necessary corrections.

Similar Messages

U6678700.drv fails with "AutoPatch error: Unable to allocate memory in proc

I am running an adpatch session to apply the u6678700.drv upgrade driver to an 11.5.10.2 instance running on AIX 6.1.
Just after the "JDBC connect string from AD_APPS_JDBC_URL is......" statement, I receive "AutoPatch error: Unable to allocate memory in procedure aiumab()."
I have confirmed and reconfirmed that all O/S, Software, ulimit and kernel settings are at the required minimum values/levels per Document ID# 761569.1.
What else can I check into as to the cause of this error?

There are no entries in the DB Log of any relevance to the error.
ADPATCH LOG FILE:
Uploading PL/SQL direct execute exceptions from file ...
Done uploading PL/SQL direct execute exceptions from file.
Done validating PL/SQL direct execute exceptions file.
JDBC connect string from AD_APPS_JDBC_URL is
(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=lajeffeux03)(PORT=1521)))(CONNECT_DATA=(SID=UPG)))
AutoPatch error:
Unable to allocate memory in procedure aiumab().
You should check the file
/oracle/d01/oraupg/apps/apps_st/appl/admin/UPG/log/6678700_adpatch.log
for errors.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

After downloading and creating the MSI for Lightroom, the install fails with no errors reported. Checking compatability, windows comes back with not compatible on both win 7 and 8.1.

Installer MSI fails with no error or message of any kind. Tested compatability with the windows compatability check and it comes back as not compatible. What now?

Hans,
It is a known problem on Windows 98, Windows and Windows 2000 if you are using Intel Pentium 4 processor with Sun JRE and Symantec JIT. I had the same problem with Windows 98. Oracle has a patch. Please see Note:131299.1 on metalink for details.

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Import error imp-00017: following statement failed with oracle error 1659:

Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

Thanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error

IMP-00017: following statement failed with ORACLE error 1658

Hi All,
Please help me to find the reason of this error while importing the export file using parameters full=Y,ignore=n.
IMP-00003: ORACLE error 1658 encountered
ORA-01658: unable to create INITIAL extent for segment in tablespace USERS
IMP-00017: following statement failed with ORACLE error 1658:
"CREATE TABLE "TABLE_NAME" ("SEGMENTID" VARCHAR2(10) NOT NULL EN"
"ABLE, "DRIVERID" VARCHAR2(10) NOT NULL ENABLE, "VEHICLEID" VARCHAR2(10) NOT"
" NULL ENABLE, "START_TIME" VARCHAR2(6) NOT NULL ENABLE, "END_TIME" VARCHAR2"
"(6) NOT NULL ENABLE, "REPORT_TIME" VARCHAR2(6) NOT NULL ENABLE, "DISPOSITIO"
"N" VARCHAR2(1), "S_LOCATION1" VARCHAR2(12), "S_LOCATION2" VARCHAR2(60) NOT "
"NULL ENABLE, "S_LOCATION3" VARCHAR2(12), "S_LOCATION_ENT" VARCHAR2(30), "S_"
"CITYTOWN" VARCHAR2(30) NOT NULL ENABLE, "S_ZIP" VARCHAR2(10) NOT NULL ENABL"
"E, "S_STATEPRO" VARCHAR2(4) NOT NULL ENABLE, "S_COUNTRY" VARCHAR2(2), "S_CO"
"MNTS" VARCHAR2(1), "S_GRID_LAT" NUMBER(10, 6), "S_GRID_LONG" NUMBER(10, 6),"
" "E_LOCATION1" VARCHAR2(12), "E_LOCATION2" VARCHAR2(60) NOT NULL ENABLE, "E"
"_LOCATION3" VARCHAR2(12), "E_LOCATION_ENT" VARCHAR2(30), "E_CITYTOWN" VARCH"
"AR2(30) NOT NULL ENABLE, "E_ZIP" VARCHAR2(10) NOT NULL ENABLE, "E_STATEPRO""
" VARCHAR2(4) NOT NULL ENABLE, "E_COUNTRY" VARCHAR2(2), "E_COMNTS" VARCHAR2("
"1), "E_GRID_LAT" NUMBER(10, 6), "E_GRID_LONG" NUMBER(10, 6), "COMMENTS" VAR"
"CHAR2(200), "STATE" NUMBER(*,0), "OPER_ID" VARCHAR2(20), "UNQ_ID" VARCHAR2("
"40), "DESCR" VARCHAR2(200), "S_COUNTY" VARCHAR2(30), "E_COUNTY" VARCHAR2(30"
")) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FRE"
"ELISTS 1 FREELIST GROUPS 1) TABLESPACE "USERS" LOGGING"
Again the next one is
IMP-00003: ORACLE error 376 encountered
ORA-00376: file 7 cannot be read at this time
ORA-01110: data file 7: 'D:\ORACLE\ORADATA\ITMS\USERS01.DBF'
IMP-00017: following statement failed with ORACLE error 376:
"CREATE INDEX "TDR_INDX" ON "ITMS_SCHED_TRIPS" ("SEGMENTID" , TRUNC("TRAVELDAT"
"E") ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1"
" FREELIST GROUPS 1) TABLESPACE "INDX" NOLOGGING"
Thanks in advance.
Abhijeet

Hi,
Please check whether you have permission to write on this 'D:\ORACLE\ORADATA\ITMS\USERS01.DBF' .
Also please check if that file is actually present there or not...?
Error ORACLE error 1658 means that either your datafile has filled completely and its not set to auto extend OR hard disk where that file is residing is full and oracle cannot allocate the minimum memory to the segment that is Extent
Regards

RAID 1 setup fails with POSIX error

I am trying to set up a RAID 1 array using 2 brand-new Iomega eGo 2TB Desktop Hard Drives. They are connected via Firewire 800, with the second connected to the first through Firewire pass-through. I'm on 10.6.8, on an iMac 9,1 with the 2.66Ghz Core 2 duo and 8GB RAM.
I complete all the steps to create the RAID array, add the drives to the array, select "Automatically rebuild RAID mirror sets", and when I hit "create", Disk Utility unmounts the disk, starts to create the array, and then gives me the following error.
Creating RAID set failed with the error:
POSIX reports: The operation couldn't be completed. Operation not permitted.
Am I doing something wrong in the setup? Does this mean one of the drives is a dud? Does this mean I can't create a RAID array with pass-through Firewire drives?
Any help or advice would be greatly appreciated.

I ran the 1.1.1 upgrade this afternoon. I've been through the same process three times, but I was getting error 1602. Now when I unplug, reboot the Mac and reboot the phone, wait for everything to load, iPhoto recognizes the camera/pictures, but iTunes does not recognize the iPhone, and when it does, I get the spinning color wheel until I'm told that my iPhone timed out (or I get the error message above again). I've not hacked the iPhone, and even though iTunes isn't recognizing it, the phone is as fully functional as it was before the ill fated upgrade.
There is a support article but it appears to be geared towards Windows.
Error 1601 or 1602 when restoring iPhone or iPod touch in iTunes
Issue
When trying to restore your iPhone in iTunes, you may see the following message followed by an error code 1601 or 1602:
The iPhone could not be restored. An unknown error occurred.
Or when trying to restore your iPod touch in iTunes, you may see the following message:
The iPod "[username]" could not be restored. An unknown error occurred (1602)
Products affected
iPhone
iPod touch
iTunes 7.4 or later
Solution
Restart the computer and try to restore the iPhone or iPod touch again.
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes. Select the appropriate link below for instructions on how to accomplish this for your operating system.
Windows XP
Windows Vista
Try restoring the iPhone or iPod touch on a different computer using iTunes (if another computer is available).
Message was edited by: Lane Baysden

Rendering of Proxies in AE fails with generic error messages.

*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?

Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

CRM 2015 Update 0.1 Install Fails with SQL Error

Hi, anyone managed to install CRM 2015 Update 0.1?
The software installed fine but the DB updates fail with a SQL error. Just want to know if this is just my issue or if MS have a bug in the update. This is the SQL error:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: The current transaction cannot be committed and cannot support operations that write to the log file. Roll
back the transaction.
Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
All of the ORGs fail with this error, even when I try to apply the DB update via Deployment manager. I've had to back out the rollup.

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

Desktop create fails with javascript error (unable to proceed)

Similar Messages

Maybe you are looking for