Desktop display help needed

my son was playing with the computer and accidentally did something to change the display of the desktop screen and now everything is re-sized. The dock on the bottom of the screen and the bar on top no longer fit on the page together and all the icons on my desktop and my screensaver pic are larger and slightly distorted This re-size continues when I open up Safari. Help please!

Welcome to the Apple Support Communities
Open System Preferences > Display and select the maximum resolution

Similar Messages

Desktop softwear help needed

hi i'm having trouble with desktop softwear since my second harddrive stoped working
the installer constanly tries to reinstall desktop softwear if you cancel install it just starts again
wont let me uninstall as some files missing has remove some folders and registry entres but installer still stuck in constant loop
wont let me install again as it's already installed
HELP HELP HELP its driving me mad

Welcome to the Apple Support Communities
Open System Preferences > Display and select the maximum resolution

Report vendor GL account line item display (help needed)

hi all,
how r u there?
i have one scenario that depending on HKONT
which is on my selection screen i should not get that HKONt in my display and want to display all the offsetiing entries of that HKONT of different fisical year.
main thing is that how to & from where i will get offsetting entries for that HKONT.
currently i am using only BKPF & BSEG table
so plz let me know how i can get my above requirement.
if any one has code relating to my query and want to help me the HE or SHE can send to me on my
mail id- [email protected]
thanks in advance
for ur efforts

Hi,
Did you try the Standard SAP transaction FBL1 or FBL3..
Thanks,
Naren

MacBook hdmi lcd display - help needed!

Hi all, I'm connecting my MacBook to my 32" Vizio lcd via hdmi (using a mini-dvi to dvi adaptor & dvi to hdmi cable). When I mirror displays, one of two things happen: (1) either the Vizio display is too small and has black bars around it, or (2) the Vizio display is too large and I cannot see the menu bar or the dock.
The fist time I connected to the tv, I managed to get the full screen display perfectly but have not been able to repeat this since. I've tried everything I can think of - different combinations of resolutions, with and without overscan, etc.
Any advice much appreciated!

Try this:
Hook the MB up to the Vizio.
Hook the MB up to it's Magsafe power adapter and plug the adapter in.
Close the lid on the MB so it goes to sleep.
Now, plug something into a USB port on the MB.
The recommended thing to plug in would be a USB keyboard and mouse. But you could use just one of those, meaning either a keyboard or a mouse. If you don't have a USB keyboard or mouse, you can just plug in one of those USB flash memory devices.
The USB activity will cause the MB to wake up with its lid down and only the external (Vizio) screen will be active. Once that happens, you can lift the lid on the MB and use its keyboard and trackpad and the built-in screen will stay off.

Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi!
Need some help with the same:
Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

Total Desktop Melt Down, Need Help!!!!

Okay,
My Desktop is gone. Let me explain. I was running Toast, Safari and Photoshop CS. I started Quickbooks and Quickboks started to run the "Check for Updates" and when it did that a Dialog box came up saying i was not connected to the internet which I knew was wrong. Just a second after that happened the computer blinked and the desktop was wiped clean. The Desktop Icon appears as a generic white icon and if I click on it Text Edit starts up. Everything I had on the desktop is gone. I ran Permissions, Periodic through the Terminal, and I even ran FSCK. FSCK repaired a small error in the header and the computer started up fine. But still the generic icon remains. I can't get the Desktop to appear or act as a directory. I cannot create a new folder on the desktop. I cannot drag a file onto the desktop. Help!!!

I just had the same thing, and after trying everything I could, I finally tossed my desktop folder and restarted. Now all is ok. Luckily I didn't have anything on the desktop that was irreplaceable. See this:
http://quickbooksgroup.com/webx?addPost@@.f7ca359

Desktop display has a border

I have noticed on my 21.5" Imac display that i have a 3-4mm black border along the top and left hand side of the desktop display. It looks like the display has dropped diagonally towards the bottom right hand corner.
Any suggestions?
Thanks in advance
Mark

Hi Mark,
I have the same model as you.
As Rudegar says, on the 2011 iMac although the glass goes right to the edge (except along the bottom where there is an aluminium strip with the Apple logo in the centre), the actual LCD screen does not extend to the edges. There is a black border (I've just measured it and it is 2.7cm wide) all round the screen area which the image does not extend into. If this is the width of your border and it is equal all round the screen image area, then that is normal.
If, on the other hand, it is markedly wider on one or two sides, then you may need to experiment with your screen resolution. If this doesn't help then you may have a screen problem for a repairer to take a look at

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

Help needed to move contacts

hi, i have a problem that i have bought blackberry 8520.i want to switch my contacts from my old mobile samsung star s5230 to blackberry 8520.i have shifted my contacts from samsung to my laptop but i am unable to transfer from laptop to blackberry.i have tried to send some contacts to blackberry from laptop but blackberry doesnot show it.please let me know how can i do it.i have also downloaded blackberry desktop software but i dont know how to shift contacts from laptop to blackberry.

Duplicate...see:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/help-needed-to-move-contacts/m-p/1287437#nob...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on CD740 ???

Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
Thanx.

I tried compling servlet, but it is raising error
that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & Regards

I don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again.

Help needed in setting up Japanese Database

Hi there,
Help needed in setting up Japanese Database.
I created database with UTF8 character set on Sun Solaris O/S.
Oracle version 8.1.7.
I am accessing the DB through SQL*Plus (Windows client).
I downloaded the Japanese font on client side and also set the NLS_LANG environment variable to Japanese_Japan.UTF8. Still, I am not able to view Japanese characters. O/S on client side is Windows 2000 professional (English). Is O/S (client) need to be Japanese O/S? When I try to retrieve sysdate, its displaying in Japanese but not all characters in Japanese. Can anyone help me out how to set up the client and is there any parameters to be setup at server side? I also tried to insert japanese characters into table through client, but it displaying as "?????" characters. Any help in this regard is appreciated.
Thanks in advance,
-Shankar

lol
your program is working just fine.
do you know what accept does? if not read below.
serversocket.accept() is where java stops and waits for a (client)socket to connect to it.
only after a socket has connected wil the program continue.
try putting the accept() in its own little thread and let it wait there while your program continues in another thread

Desktop display help needed

Similar Messages

Maybe you are looking for