Desktop exports older version of EXCEL

Hi All
discoverer desktop is exporting the output in older version of Excel. same report when opened and exported in plus it is exporting in current MS Excel version. any clues why its happening so ?? is this a settings issue? is this desktop version issue?? any thoughts would be really appreciated
on my machine, i have Microsoft Excel 2003
my discoverer desktop version: 10.1.2.1
Desktop client : 10.1.2.48.18
we are having issues with this older version of exported excel output, so please advice me on this issue.
thanks
ss

Michael and Kranthi
after looking at your replies i could say that my question is not explained clearly, let me explain this properly
first and foremost
1. i have Microsoft office 2003 running on my machine, it is running good with out any kind of problem.(+here i confirm my excel is good+)
secondly coming to Discoverer
1. reports are running fine in Discoverer Desktop and PLUS(+here i confirm while running the reports+)
2. when i export the output from PLUS, it exports fine, i can edit, i can modify and save the exported spreadsheet without any issue.(+here i confirm my output from PLUS is good+)
3. when i export the output from desktop, it exports ok but when i try to edit and save it, it will give a message as below
+"xx_disco_workbook.xls is a Microsoft Excel 5.0/95 workbook.do you want it to overwrite it with latest excel format "+
if i click yes it is saving in 2003 excel, but my question is why did Discoverer desktop export excel 5.0/95 ?? not sure from where and how is this version getting exported??
hope my question is clear this time, i appreciate your response,
FYI:
i searched whole forum for this kind of issue, i found one question raised back in 2000, but dint had a solution
Excel Exports from Discoverer 9i Desktop
thanks
Ss

Similar Messages

GB exporting older version of my movie

A previous version, the wrong one, of my movie is exporting to iTunes.
I have done a few short movies, placed them in GB for music, and then exported them to iTunes just fine, until now.
I make some changes in GB, save it, export it to iTunes and when I click on it in iTunes, it plays the pervious version. I even "save as" a different file name in GB, export it, and when it's in my Movies section in iTunes, it is importing the older version.
I have also tried dragging it from the Finder menu, which the latest version is correct b/c i tested it, into iTunes and the previous version still keeps importing...and it uses the new "save as" file name, but it's incorrect.
Am I missing something? Is there a way to clear out some sort of cache?

I just ended up exporting the movie using the Expert Settings and the correct file is now in iTunes.

Why uninstall all files to upgrade Desktop from older version on CD You loose user manual and God knows what else!

Upgraded Palm desktop for Macintosh. Followed std help instructions to put my user data in safe place and then proceed with deleting all old version files.
I'm done with version upgrade, now where is the documentation to use it? I used to have a document folder in PALM application folder, but the new install didn't create it. No manual, no readme files. I do still have the V4.0 CD.
Versions:
WAS desktop 4.0 (2002) .....................IS 4.2.1 Rev D
It seems like their instructions to get all the PALM files off the hardrive mean there is no use for what is on the CD once you run a software install off their website. But even this popular solution mentions in 2nd paragraph their are "certain features" on the CD. lost CD sol'n
I have read you want the CD data on hardrive when upgrading, or maybe just keep it for extra files like RealPlayer...
Post relates to: Zire 71
Message Edited by miamor on 01-15-2010 11:32 PM

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

Excel 2013 crashes when trying to open existing worksheets from previous versions of Excel

Hello
I have windows 8 and Excel 2013 on my system. I need to access previously created worksheets (in older versions of Excel), however, when I attempt to open them the Excel crashes.
The is not what I expected from getting the latest version. I telephoned Microsoft who advised that there was a compatabilty problem with no work around at this stage.
I found that the only way round it was to use an (download free) alternative non-Microsoft program
http://www.openoffice.org/ and copy into the 2013 Excel as a new worksheet. A little disappointing after purchasing the Excel .
Have I got this wrong or is there a Microsoft solution to this issue???

Hi,
Try the following steps:
Open Excel 2013, and go to
File –> Options –> Trust Center.
Under
Trust Center settings, select Protected View and
uncheck all options under it.
Restart the Excel 2013 to check the issue.
Jaynet Zhang
TechNet Community Support

Desktop 5.6.2 w/ older versions on the server

If clients are using various versions of XML Publisher, 5.0, 5.5, 5.6.1, or 5.6.2. Do I have to use the corresponding desktop utility to develop templates for those instances...
Or is it just a matter of "dumb-ing" down your templates if the server is running one of these older versions?
Thanks,
Jeremy

Hi
I am currently using version 5.6 Build 45 of the Template Builder for Word and running 5.6.1 - patch 4905678 on the server. I exported an .rtf template to XSL-FO using the template builder and got the java.lang error when running the template in XML Publisher.
Do the versions of the Template Builder and the server have to match exactly? Does anyone know where/how I can get the 5.6.1 version of the Template Builder for Word?
All info/suggestions appreciated.
Thanks
KH

I use iBookAuthor to make a textbook for my students; I revised it, including title page, but when I export it and upload it to my iPad, the old title page appears, even though I've deleted the older version of the text before I upload the new one.

Last year I produced a textbook using iBookAuthor for my students. I exported it as an iBook and they uploaded it to their iPads. This year, I revised it, including revising the title page. However, when I upload the new version, the old title page is shown, not the new one. I deleted the older version of the textbook before I did this. I've been told that I can cut and paste each revised chapter into a new template and that will work; however, title page and glossary can't be cut and pasted. Any thoughts for getting the entire new version on the iPad? I'm also told that if it is uploaded to an iPad that never had a previous version of this textbook, it will upload correctly. But my iPad has had several older versions, now deleted.

I had a similar issue when trying to create an iBook file to submit for course credit for one of the Apple Learning Essentials classes I took. I had a book I'd started previously which I updated and submitted, and then had to make some edits to for the course evaluator. I made the edits, and when I previewed the book in iBooks Author, it looked correct, but whatever I sent to him only showed some of the edits - for example a new page I created was there, but some edits I made to image captions and the title page image were not.
What worked for me was to do a "Save as" of the actual Author file to a totally new location (I used the Desktop), and then submit that file - which seemed to work in terms of the changes sticking. I even used the same file name.
I'm not sure if some similar action might help you (maybe change the file name slightly?) or if you've already tried something like this.
Still doesn't change the fact that this is a pretty irritating bug.

RDP Published IE application. On export would like to use local version of Excel.

We have a remote app (Internet Explorer site) that we have published. When a exports to an Excel spreadsheet server instance of Excel opens. Instead we would like to use the local version of Excel. Similar to this option in Dynamics:
https://community.dynamics.com/ax/b/mohamedaamersmsdynamicsblog/archive/2012/12/08/microsoft-dynamics-ax-2012-r2-ms-excel-remote-desktop-session-export.aspx
My boss said that he used to do this with a program called Soft Grid (purchased by Microsoft at some point), but I don't see a way of doing this in RDS.
Is this possible?

We have a remote app (Internet Explorer site) that we have published. When a exports to an Excel spreadsheet server instance of Excel opens. Instead we would like to use the local version of Excel. Similar to this option in Dynamics:
https://community.dynamics.com/ax/b/mohamedaamersmsdynamicsblog/archive/2012/12/08/microsoft-dynamics-ax-2012-r2-ms-excel-remote-desktop-session-export.aspx
My boss said that he used to do this with a program called Soft Grid (purchased by Microsoft at some point), but I don't see a way of doing this in RDS.
Is this possible?
How do you export the contains to Excel ? Do you have control on it ? If you can modify your program which made the export to local disk drive (\\TSClient\C\etc) then you can use another program like Remote Executer
to send a command to client side to open that Excel file on the local machine. Take a look at
http://www.mqtechnologies.com/TSRemoteExec.aspx
Regards
Thomas Tran

Exporting to a French version of Excel - revenue info is not accurate !

Hi, I was wondering if anyone has had trouble at their company with users that are working on a French desktop trying to export reports from CRM. Right now when any of my French users export an Opportunity Revenue report from CRM, some - but not all - of the revenue fields are dropping that last three digits. Ie. A $30,000 Opportunity in CRM would show as $30 in Excel when exported.
If I get any of the French users to try this on my machine (which is running an English version of Excel) the report is fine.
Any suggestion on how I could go about fixing this would be great.
thanks, Margo

It sounds like the number separators are the problem... have the French desktop users open Excel, go to the Tools Menu and select Options. On the International Tab, adjust the Number Handling settings. The French users probably have a comma in the Decimal separator field here and Excel interprets $30,000 as $30... $30,750 would translate to $30.75.
Mike L

When Exporting a Crystal Report to Excel format all of the dates get changed when viewed on Mac version of Excel

We're using Crystal Reports 10 and when we export a report from the Crystal Viewer using either the MS Excel 97-2000 option or the MS Excel 97-2000 (Data Only) option, the date columns on the report appear as expected on a PC version of Excel, however, most of the users at our company use Macs so when they open the same report on the Mac version of Excel all of the dates show up as 2011 or 2012 dates eventhough they are suppose to be 2008 dates. We've tried to just open the report after the export process and then do a "Save As" but get the same result. The date columns all appear to be formatted as Date. The dates on the Crystal Viewer appear as expected when viewed on a Mac. The users are running Excel for Mac OS-X Service Release 1.0. Any idea why this may be happening and is there a solution to this problem? Thanks!

Hi,
To clarify, are you currently using the Mac version of Crystal Reports Viewer 2008 which you downloaded from here?: http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx

I downloaded a older version itunes 10.3.1 64-bit. i already have music on my iphone 5c by using my desktop how do i sync my phone to itunes on my laptop

when i downloaded the latest version and tried to open it, it said "apple application support error 2" thats why i downloaded and older version but i think i need the latest im order to sync with my iphone 5c. it works my desktop but not for my laptop. HELP!

Hey cdixon11!
Here is an article that can help you troubleshoot this issue with your iTunes installation regarding that error code:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

TS3489 Can the older version of Java be restored to the Mac OS X 10.4.11? I have a new MacBook, but I like using my older desktop model for certain things.

Although I have a new MacBook, I also have an older desktop Mac OS X 10.4.11 (which I still use) that just recently "stated" the older Java plug-in has been removed and the newer version needs to be installed. The Mac OS X 10.4.11 doe not appear to be compatible with the updated version of Java. Prior to this week, my grandchildren have been able to play some online early childhood games with this computer and I have been able to watch the occasional YouTube video. Can the older version of Java be restored to the Mac OS X 10.4.11?

I'm not familiar enough with the Mac to know where your history is. Hopefully another Mac user can chime in.
You can download your preferred language version of Firefox 3.6.28 here:
http://www.mozilla.org/firefox/all-older

I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal.

I've downloaded and installed Lightroom 6. The icon is on my desktop, but it won't open. The older version is still there also, and it works like normal. How do I fix this.

Hi Alian,
Please try to follow the steps given in the article.
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Regards,
Sumit Singh

HT4906 i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

What version do you have?
iPhoto menu -> About iphoto.
What goes to your iPad/iPhone is controlled in iTunes.
Regards
TD

Export and import a whole older version datebase to a new one

Hi, everyone,
There is a requirement to export one Oracle database(8.0.5) and import into one database instance(Oracle 8.1.7 over WinNT). Are there any detailed procedure or check to follow for this operation? or any document and URL helpful can guide this operation.
Or anything should be carefully for different version and different OS?
Thanks in advance,
Hawk

You need to run your export with the older version software. In other words, use the 8.1.7 version export program if you want into import to 8.1.7. This 8.1.7 export file will also be compatible with the 8.0.5 import program, but not the other way around.
There's a compatibility matrix on Metalink. If you have a Metalink account, logon and do a search on "import export compatibility matrix".
Armand

Exporting to Quicktime for older versions

Hello. I have a the latest version of QT and so when I export a video, it plays on my computer but not for folks running older Window versions. Is there a way I can export to a QT 6 clip without having to re-install the older version of QT therefore losing the benefits of having QT 7 myself? I export in Final Cut Pro. Would getting Quicktime 7 Pro work?
Thanks for any help.
powermac g5 Mac OS X (10.4.3)

Quicktime 7 uses H264 encoding in all the presets and that means such movies require QT 7. You will have to use custom exports and choose mpeg-4 to make files that will require only QT 6. If you use Sorenson 3 then QT5 for Windows will read that. Finally, the Sorenson encoder without a number will produce video readable in QT 4 and later. If you are not up to speed on how to make customized encodings then download this pdf guide to learn how to do it. I'm not sure if this link is still active so you may have to do a search of the Quicktime site if the link doesn't work for you:
http://images.apple.com/quicktime/pdf/QuickTime7UserGuide.pdf
P.S. That link seems to work but you will need the free Acrobat reader installed to be able to use the guide.

Desktop exports older version of EXCEL

Similar Messages

Maybe you are looking for