Desktop files don't update themselves...

I keep my mail running in the backround all the time, but when I want to attach a file that I have just created (say a pdf) the file doesn't show up unless I quit the Mail program and relaunch it. It seems to reset the desktop files so I can choose the file. Is there any way of resetting something in the program so I don't have quit and relaunch to update the desktop files?

Hi Sherry! and Welcome To Discussions!
Without quitting the program, try just clicking on an open area of the Desktop, and see if the files then appear.
Good Luck!
ali b

Similar Messages

Placed files don't update when changed

For some reason when I place PSD files into Illustrator, they no longer update when changed.
I've tried setting preferences to both 'Ask When Modified' and 'Automatically'...
It used to work OK, just in the past month or so it's stopped.
Also I notice that when I place a PSD file it is asking me if I want to flatten layers, which it didn't used to, as far as I remember.

Right you iz.
You can always use the Place command to replace an embedded file with a linked one.
If you've got Shift or Shift Lock held down, files will embed when placed or dragged in from the finder, otherwise they'll be linked.

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Help?

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Can anything be done? Incila

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Files don't appear visually on the desktop

I recently installed Leopard and I've been working with Logic 7.2.
Before upgrading to Leopard When I created new audio files with Logic they usually appeared immediately on the desktop if I assigned them there. With Leopard they do not. They can be seen in the Finder however. They just don't appear on the desktop. I've discovered that if I reboot then the icons show up on the desktop. I hate to have to reboot every time I want to see files that may be on my desktop, especially since I need to have visual confirmation of 20 or 30 files in one session. Is there another way or is this just a Leopard fluke?
Fernando Rivas
[email protected]

This problem shows up with distressing frequency, and I'm not sure why. The preferences for the Desktop, such things as the view options for arrangement, whether to display a preview icon, and so on, are kept in this file:
"/Users/yourname/Library/Preferences/com.apple.finder.plist"
Other information is kept in .DS_Store file for the Desktop folder itself, thus when a new file is created in the Desktop folder the .DS_Store file is immediately updated with that information. Finder should be seeing this and updating the view of the Desktop that displays on the monitor, but sometimes it can be a sluggard about doing so.
You could try removing both the finder.plist file, and the Desktop's invisible .DS_Store file (you will need to turn on show invisibles to do so, or use the Terminal) and then relaunch the Finder or log out and back in and see if that fixes the problem. It should not be necessary to restart to see your Desktop files: simply opening the actual Desktop folder in your home folder should show the files, even though the Finder isn't updating the monitor display to reflect the state of the actual folder. Sometimes if you open the folder and select a file there the Finder will then update its display of the Desktop on the monitor. Also, when Finder is being unbearably slow about showing things generally you can force it to update by relaunching it: hold down the Option key and click and hold the click on the Finder icon in the Dock, then select Relaunch from the pop up menu. All folders will close and the Desktop will "blink" and then reappear--hopefully its reappearance will display all the latest files that are present in the Desktop folder.
Francine
Francine
Schwieder

I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)." My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac? Sometimes when I try to view streaming video I get sound but no video.
>

How do I get Adobe Air Desktop App to notify user that a URL text file has been updated?

How do I get an Adobe Air Desktop App to notify user that a URLRequest ".txt" file has been updated? via blinking system tray icon or something.
New to Air and need someone to point me in the right direction. I have been searching web for hours and probably not asking the question right.
I have a very simple Desktop App that just loads a text file from a web location into a dynamic text field at a set timer. it just repeats this action on the timer. right now every 5 minutes
What would the actionscript be to tell the Air App to look at the date or time stamp of the ".txt" file and notify user if its new?
Thanks

Try to follow below steps
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Now click on finder and hold Command + Shift + G keys on your keypad.
This time type /Library and click on Go.
Make sure to remove ~ symbol.
Then open Application Support > Adobe folders.
Trash AAMUpdater, Adobe Application manager, OOBE folders.
Now Click on Finder and then hold Command + Shift + U keys on your keypad.
It will open utilities folder.
Trash Adobe Creative Cloud and Adobe Application Manager folders
Download and Run CC cleaner tool from below link
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Accept the license agreement and click on Adobe Application Manager
Then click on clean up selected
Close the window
Download and install Creative Cloud App from below link
Free Creative Cloud | Download Adobe Creative Cloud free trial

How can I retrieve desktop files being erased after updating my computer?

How can I retrieve desktop files being erased after updating my computer?

The easiest method would be to restore them from the last Time Machine backup made just prior to the update.
Or use a file recovery application to recovery them. Most have a demo mode so you can determine if it can find the files you need before purchasing it. Go to MacUpdate.com and do a search for "recover files" to get a list of potential candidates.

When I edit files on my desktop, do they automatically update in my Creative Cloud files online?

I do not have Creative Cloud for my desktop (I use OS 10.6.8, do not plan on upgrading anytime soon...) I work on my files on my desktop and save them there, but also like to have a back up in my cloud membership that I log in to online. When I make changes and save my files on my desktop, do I have to re-upload them to the cloud files online? Or do they sync automatically?

If you do have the Creative Cloud app in the future then yes you can sync new files, and sync updates to existing files that are in the Creative Cloud Files folder.

You know that whole .desktop file security scare?

It goes something like this:
1) Open a malicious email attachment or go to a website with malicious javascript or whatever...
2) A program is downloaded and executed with your permissions
3) It edits ~/.local/applications/synaptic.desktop or whatever other popular program.
4) In the new .desktop file it adds to the run command some nasty key logger, so now when you launch Synaptic (or pacman if someone were to attack Archers) it logs your keystrokes.
5) Now it has your root password and can do whatever it wants.
I just want to know: How likely is this, really??
Can a website seriously just download and run a file without me knowing? I doubt Firefox would let that happen... Or could an email attachment be executed without me being able to read it first? I'm pretty sure it can't...
I don't understand why people seem to be concerned about .desktop files...
I'm not even worried about my Windows machine on my home network. My router is set to reject as much stuff as it can and all computers have remote log-ins disabled. The only security problem I worry about is that my Fiancee's online courses actually send .doc's through the net, which I've heard is bad practice.

What I've read about it has a nasty tweak, a properly crafted .desktop file could launch a dialog asking for your/root password, at that time it wrecks havoc in the system and open the add/remove software, updates or whatever is it disguised to do and the user doesn't realize what just happened.
Of course there is always the other option of running as user and do whatever it can, if the creator is smart and lucky enough he/she will be able to put a nasty payload on the autostart list and the user can have a zombie machine without even knowing.
It doesn't need to break the system to do a lot of damage, wiping or stealing data from the user account is enough. Of course, this has a higher probability of happening if you run and/or install everything you find in untrusted places without proper review first.
The thing is that there are so many distros and so many versions of each distro, each with slightly different settings, DEs, browsers and whatnot that I guess it still isn't worth the bother unlike with platforms where everyone uses the same browser, possibly the default settings that come with a clean system install and worse, no security updates/patches.
Add to this the complete lack of good sense and the common (and somewhat accepted I guess) practice of using cracks and keygens for you know what and you start to understand how come at least some users keep getting the same problems over and over again.
These days with linux it is extremely easy to keep the system up to date with the latest security fixes, users tend to look free alternatives to payed programs and look first in the package manager to see if it is already available, this alone helps a lot, add a dose of good sense and you should be good to go.

Desktop files disappeared (advanced user)

Hello,
Main Problem:
While working (though not specifically while I was watching, ie: I was cycling through firefox, acrobat reader, outlook 2010, and microsoft word 2010 without viewing the desktop very often) all of the documents on my desktop disappeared.
Meaning, they were all there (some have been there for months) this morning when I came to work and turned my computer on, and while working (without rebooting or doing anything abnormal) the files disappeared. None of the folders have disappeared nor have
their positions on the desktop changed. The only thing out of the normal routine that I did today was update Adobe Acrobat Reader 9. I don't use X because it conflicts with my printer, though lately it's been acting up anyway so I thought it might be 9 and
did the check for updates(I've had check for updates turned off until now). It updated from something like 9.2.5 to 9.5.1. Other than that it's been a usual day of typing in Word, opening PDFs and printing them out, with a little Outlook 2010, Mozilla Firefox,
and some wordpad.
Some specs:
Windows 7 Professional 64-bit (no pending windows updates)
ESET Smart Security, active, up to date, and running the entire time. (Full scan returned no problems)
8gigs ram, C drive 500GB, D drive 80GB, E drive 1TB
and other various goodies I'll be glad to divulge if anyone wants to know.
Things that are -not- wrong:
I've been using computers for over 20 years, I built this one from parts as I do with all my computers, yada yada, I'm the "computer guy" at my company I run the network, I setup all the boxes, and take care of all the repairs and problems. Then again I am
not certified or licensed in anything, there is plenty about Windows, and especially Windows 7 that I do not understand. Also, and this is quite unfortunate, I live and work in Japan so my OS is in Japanese. I am fluent to an extent but I cannot navigate some
of the control panel areas without a little trial and error because the chinese characters get a little tricky when you get into too specific of a subject; BUT, I love and have been using ACDSee Classic forever, with it's "show hidden" and "show system" files
options, I have free reign over hidden files and programs from the rest of the people that use this computer who do not know what ACDSee is (safer for them).
Nothing shows up in ACDSee or explorer with show hidden files active in my desktop folder or any other user's desktop (there's only one user but windows makes those "all users" folders anyway) or on the desktop itself. All the folders remain untouched.
Files that were positioned between two folders are missing, meaning I didn't accidentally click and drag the whole desktop into my recycle bin and some how clean the bin without noticing.
Only one file shows up in quick recovery scans of the recycle bin or the desktop, and I'm currently in the process of a deep scan of the entire C drive. (though I didn't delete the files, so why should they?)
Solution?
The only thing I can imagine is that somehow some sector of the desktop got "archived" or sectioned off in some manner. If I can assume the folders within the desktop folder have their own paths (their own separate sectors on the disk, albeit within the desktop
sector) and that the files within the desktop folder all share a common sector (the desktop folder) perhaps that sector got somehow funked with? For example the shortcut to "My Computer" even went missing. All I had left was a recycle bin and 9-10 folders
scattered across the desktop. So is there some way I can look into recovering that specific sector? Some sort of indexing/archiving that might cause this?
I don't have recovery points, nor that recent of backups to recover files such as last nights work or last weeks work, but more important than getting my data back is, [u]What Happened[/u]!? So it doesn't happen again.
It seems there are actually a fair share of people (on this site and MANY others) that have or have had this problem and now fear their desktop as an evil devourer of mid-term papers. In my case as well, weeks of work, in a business environment, definitely
NOT acceptable.
Help!
If anyone has any insight or ideas of what could be causing this that would be great. We need an open discussion on this. Again it does not have to do with Human error (me), nor does it seem to be a virus (the hidden files deal); I have plenty experience with
computers and after scouring the task manager and the hard disk with various tools I cannot find tens of files all from one single location, that were all there just hours ago!.............??? Trying a search or turning desktop icons on something simple like
that has already been done XD no offense, but this is not that simple.
Thanks for any input!

Thanks again Milos.
A. The desktop theme and start menu etc. remain unchanged. Would that stand as proof the profile was not reset?
B. I was directed towards recuva on a different forum as well and gave it a shot. The deep scan (of the desktop and all sub folders) did recover about 4 of my files, but they are older over written versions of the files; some of the more recently created
files don't even show up on the list... I can see stuff that was deleted last year, but not some of my missing files? That what leads me to think it's something to do with file restructuring, or maybe as you're suggesting a profile management problem. The
files just plain aren't considered to be related to the desktop folder anymore.
C. That makes sense. The desktop folder is handled differently than say a root folder on the D:\ drive... I don't save stuff on the desktop at home either... it's just something everyone seems to do for convenience at my office, though I've never seen this
problem before.
D. I sometimes have that too and usually am dealing with PDFs received via outlook 2010, thus am opening them directly with adobe's reader.
E. ?
F. Yes.
G. I will look into that; thank you.
H. Ya the administrative warnings in Windows 7 are quite a pain in my opinion... being told I don't have privilege on my own computer is a little silly... no doubt my fault for not spending the time to reassure my system that it's my fault though. I'm interested
in opening system rights both personally and for work, I will look into that when I find the time.
I also ran scan disk after a reboot (before I went home two hours later than normal the day before yesterday) but it only lasted like 3 seconds and said all is well?? Which I've never seen before, but maybe I forgot to check the "check for bad sectors" box.
So I plan to try and run that again today in as deep a format as possible.... I still assume that is somehow the problem... for the files to not even show up from a program like recuva, it feels like the sector was written off as corrupt somehow or...??
why only one specific folder, exclusive of it's subfolders! XD

Desktop - files not showing - have to force quit finder

One little thing that annoys me about using the Mac is that files don't always show up on the desktop when an application, for example wiretap saves an audio file. I've also noticed they don't always show up on the desktop automatically when transfering a file to the desktop of another mac. The only way i've found to solve this is to force quit the finder, when they show themselves at last.
This seems a bit of a glitch in the perfection of OS X to me. Is it a recognised fault because it's a bit annoying to have to force quit the finder to use the files. I'm using 10.4.8. Thanks.

Hi Jerry,
I haven't let the ball spin for longer than 5 minutes so i'll let it run for longer and see if anything happens. I've tried both starting pages and opening a document independently and both cause it to freeze. This isn't happening with any other application.
Rachel

Desktop files are sometimes disappearing.

When I start my computer my desktop files are sometimes disappearing and when I tell the computer to organize the desktop they will return. I have been using Mac's for 15 years and never have I had this problem until I updated to OS X Mountain Lion. Can anyone tell me how to fix this. Is it possible this problem is because I use two monitors?
Thank you for any help.
Mark

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everythi

I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. I have authorized this new computer so I don't know what the problem is. I can't get on my old computer with my itunes account because the computer is broken. Not sure what to do

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop I get an enlarged version of the

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?

And there is the problem. Your pictures are opening up in Mac's own Preview app.
Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
Selecting a program to open a certain file is called: File Type Association.
You can choose this at the MacOS level or the Bridge level.
Here's how to do both:
Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
Go down to the "Open with" section of File Info.
Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
Then open Bridge and see if double-clicking opens it in Photoshop.
Now that means all jpegs on your Mac will open in Photoshop. Maybe you don't want that.
You can set your jpegs to open in Preview when Bridge is closed.
When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge.

I unloaded some mp3 songs into desktop file by mistake, now I get a message Item "....." is used by Mac OS X and cannont be opened. How can I fix this

I am new to this support community. I was givin a stick with a bunch of music on it, I wanted to install it on my music and have never done any installations. The 3000 some songs got into my system 3 times so I have 6000 some in my desktop file and had ( I deleted or lost it somewhere??) 9000 some in my documents file. When I click on a song I get a message... Item "Alan Jackson - My Own Kind Of Hat 2.mp3" is used by Mac OS X and cannot be opened.
1. What can I do to clean these files out ?
2. What does this message indicate?
3. I did manage to trash some of the songs But had another message that sounded like I should not attempt this either.
Any help would be appreciated.

I have exactly the same problem. I have tried Applejack and TechTools Pro to correct permissions and the files are still unaccessible.
The computer is a 2x3 GHz Dual-core Intel Xeon w/16GB Memory, running OS X 10.4.10.
I too would greatly appreciate a hint on how to access these files.

Desktop files don't update themselves...

Similar Messages

Maybe you are looking for