Desktop Folder is now a Text File
Hi there!
I tried searching the forums for answers with no luck. Somehow, my desktop folder became a text file. So when I click on it, a plain text document opens with a bunch of jibberish. Is there a way to change it back to a folder?
Your input would greatly be appreciated.
Thanks!
Here's a screen shot so you can see what I'm talking about. Notice the document icon instead of a folder icon.
Message was edited by: Manuel Izaguirre1
Similar Messages
-
How to use quota on a desktop folder for all users with File Server Resource Manager.
Hi there,
I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
The path I'd like to use is d:\home\%username%\desktop.
Like to hear from you all if there is a solution or workaround for this one :)
Thanks for your time.
Ben.
Ben van der MeerThat's a question about Automator, so I'd pop that one here
http://discussions.apple.com/forum.jspa?forumID=1339
Regards
TD -
I had transferred all my photo files from my PC when I got my Mac Air. They were in a desktop folder all nicely organized in files (event, dates, etc.) That desktop folder is now gone after the Maverick update. When I click on Pictures in finder it comes up empty (not even a link to Iphoto) I had not put these pictures in iphoto yet. Before Mavericks when I clicked on Pictures the Iphoto icon and my folder showed up. My Iphoto itself is working fine and and those pictures are still intact. I know the pictures are on my Mac because they are all in Images, but they are no longer organized and are no longer in sequence. I would like to know if I my "intact" folder may still be somewhere on my computer. If not what is the best and most efficient way to get those photos from the images only file to Iphoto?
I actually just noticed the "media" option is no longer listed along the left side of Finder. I think that is where I accessed iphoto and my other picture folder.
There is no media option in the Finder. That only turns up in Open... Dialogues like this: -
HI All,
I have configured file to file scenario in which text file as input and xml file as output using file content conversion. Now my text file has two commented lines at the begining. I dont want these two lines to be read, in this case, how can I follow to convert to xml file?
Please help me
rgds,
anilTry the
Document Offset option;
Ref:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm -
Add date to new text file name and generic text in body
Okay, I hope this is the right forum. To help manage and keep track of incoming assets/files and I created an Automator workflow with the following: "Get Selected Finder Items → Get Folder Contents → New Text File (w/Show this action when the workflow runs so I can give a unique name).
This creates a text file with the folder contents listed in the body.
I would like to know if I can do two things:
1. Automatically add a date/time stamp to the Save as field so it will automatically have a unique file name?
2. I also want to add text before the listed contents within the text file. (e.g.: Let's say the folder contents are Volumes/Mac HD/Generic_movie.mov. I want the final text to read:
"The following file has been moved to the local volume at: Volumes/Mac HD/Generic_movie.mov"
Is there a way to accomplish either one or both of these with Automator or AppleScripts?
Thanks.I would like to know if I can do two things...
This might address your first concern:
*1) Get Selected Finder Items*
*2) Get Folder Contents*
*3) New Text File* -- select a destination folder and check *Show Action When Run*
*4) Rename Finder Items:*
Choose *Add Date or Time* from the popup
Date/Time: select Created, Modified, or Current - Format: *Month Day Year*
Where: *After name* - Separator: *Forward Slash*
Separator: Space - check *Use Leading Zeros* (optional)
*5) Rename Finder Items:*
Choose *Add Text* from the popup
Add: *" at"* -- put a leading space before "at" (without the quotes), and select *after name*.
*6) Rename Finder Items:*
Choose *Add Date or Time*
Date/Time: Current - Format: *Hour Minute Second*
Where: *After name* - Separator: Dash
Separator: Space - check *Use Leading Zeros* (strongly recommended)
+--- End of Workflow ---+
Save the workflow as an application and use it as a droplet. Drop a desired folder onto the saved applet and enter a name when the dialog appears. The new text file, which will be found in the destination folder, should be appended with a date and time stamp, e.g., *"My Folder List 7/8/2010 at 23-54-09"*
Tested using Mac OS 10.4.11 and Automator v. 1.0.5
Good luck; hope this helps. -
hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?
It's a Finder feature, related to Quick Look. You can hit the space bar in the file list to get a preview.
If that doesn't work, you may have an issue witha preference file or similar. I find rebuilding the launch databse works quite well resilving tis kind of thing, as does trashing Finder preferences -
How do I get Adobe Air Desktop App to notify user that a URL text file has been updated?
How do I get an Adobe Air Desktop App to notify user that a URLRequest ".txt" file has been updated? via blinking system tray icon or something.
New to Air and need someone to point me in the right direction. I have been searching web for hours and probably not asking the question right.
I have a very simple Desktop App that just loads a text file from a web location into a dynamic text field at a set timer. it just repeats this action on the timer. right now every 5 minutes
What would the actionscript be to tell the Air App to look at the date or time stamp of the ".txt" file and notify user if its new?
ThanksTry to follow below steps
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Now click on finder and hold Command + Shift + G keys on your keypad.
This time type /Library and click on Go.
Make sure to remove ~ symbol.
Then open Application Support > Adobe folders.
Trash AAMUpdater, Adobe Application manager, OOBE folders.
Now Click on Finder and then hold Command + Shift + U keys on your keypad.
It will open utilities folder.
Trash Adobe Creative Cloud and Adobe Application Manager folders
Download and Run CC cleaner tool from below link
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Accept the license agreement and click on Adobe Application Manager
Then click on clean up selected
Close the window
Download and install Creative Cloud App from below link
Free Creative Cloud | Download Adobe Creative Cloud free trial -
How to upload a text file from a shared folder and provide an o/p
how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file
Hi,
Use <b>GUI_UPLOAD</b> to upload a text file from a shared folder.
Use <b>GUI_DOWNLOAD</b> to download data in a file on the presentation server or use <b>OPEN DATASET, TRANSFER</b> and <b>CLOSE DATASET</b> statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul -
Extract text file from a folder and read the content
Hi
I have "n" no.of text files saved in a folder with automatically generated naming convention which include DD/MM/YYYY and also some measurement output value.
Eg: 1) Die_1_DUT_outputvalue_DD_MM_YYYY.txt
2) Die_1_DUT_outputvalue_DD_MM_YYYY_ABC.txt
In the above files part of the 2nd file naming convention same as the first file (i.e. Die_1_DUT and DD_MM_YYYY) whereas outputvalue is different and an additional string named ABC is appended.
Now I want to search the 2nd file based on matching the naming pattern with the 1st file (note: the outputvalue in the file name is different for both files) and so far followed this method
1) Use a list folder with *.txt pattern to search all the text files and the output is a 1D array
2) then use array to cluster and then flatten to XML function to have all the text file names as a string element (not 1D array)
3) then pass the output of the 2nd step to the sting match pattern and use a regular expression to get the required file name
4) send the output of the 3rd step to search 1D array to get the index and then get the file name and later use read text file to read the content of the text file
And I am stuck at the 3rd step while sending an input as the regular expression to match the pattern as the outputvalue in the namming convention of the above two files is different is there any way I can actually extract the filename/file?
Any suggestions?
Attachments:
1.png 11 KBSome bits in your code are unnecessary, a leaner implementation here:
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if -
Data from itab to be store in text file in desktop
hi
i am tyring to store the data from itab into a text file in desktop,but its now owrking.
i am using open dataset statment,but no where data is storing.My code:
TYPES : BEGIN OF ST_DEMO,
REG_NO(10) TYPE C,
NAME(20) TYPE C,
ADDR(20) TYPE C,
END OF ST_DEMO.
DATA : WA_DEMO TYPE ST_DEMO,
IT_DEMO TYPE TABLE OF ST_DEMO,
L_FNAME TYPE dxfile-filename .
PARAMETERS: P_FNAME(128) TYPE C DEFAULT '\usr\sap\put\vipin.txt' OBLIGATORY.
L_FNAME = P_FNAME.
WA_DEMO-REG_NO = '100001'.
WA_DEMO-NAME = 'ANAND'.
WA_DEMO-ADDR = 'NAGARKOVIL'.
APPEND WA_DEMO TO IT_DEMO.
OPEN DATASET L_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
WRITE :5 'REG NUM',16 'NAME',37 'ADDRESS' .
LOOP AT IT_DEMO INTO WA_DEMO.
IF SY-SUBRC = 0.
TRANSFER WA_DEMO TO L_FNAME.
WRITE :/5 WA_DEMO-REG_NO,16 WA_DEMO-NAME,37 WA_DEMO-ADDR.
ENDIF.
ENDLOOP.
close DATASET L_FNAME.
please tell me where is the prob?I wan to schedule it for background job.
regds
vipinhi
here is the code for : "data from itab to be store in text file in desktop"
TABLES: vbak. " standard table
* Type Pools *
TYPE-POOLS: slis.
* Global Structure Definitions *
*-- Structure to hold data from table CE1MCK2
TYPES: BEGIN OF tp_itab1,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
END OF tp_itab1.
*-- Data Declaration
DATA: t_itab1 TYPE TABLE OF tp_itab1.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
* Selection Screen *
*--Sales document-block
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
*--Display option - block
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS: alv_list RADIOBUTTON GROUP g1,
alv_grid RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
*file download - block
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: topc AS CHECKBOX,
p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b3.
* Initialization. *
* At Selection Screen *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_FILE'
dyname = sy-cprog
dynumb = sy-dynnr
filetype = 'P' "P-->Physical
location = 'P' "P Presentation Srever
server = space.
AT SELECTION-SCREEN ON s_vbeln.
PERFORM vbeln_validate.
* Start Of Selection *
START-OF-SELECTION.
*-- Fetching all the required data into the internal table
PERFORM select_data.
* End Of Selection *
END-OF-SELECTION.
IF t_itab1[] IS NOT INITIAL.
IF topc IS NOT INITIAL.
PERFORM download.
MESSAGE 'Data Download Completed' TYPE 'S'.
ENDIF.
PERFORM display.
ELSE.
MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
* Top Of Page Event *
TOP-OF-PAGE.
*& Form : select_data
* Description : Fetching all the data into the internal tables
* parameters : none
FORM select_data .
SELECT vbeln
posnr
werks
lgort
INTO CORRESPONDING FIELDS OF TABLE t_itab1
FROM vbap
WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
MESSAGE 'Enter The Valid Sales Document Number'(t04) TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " select_data
*& Form : display
* decription : to display data in given format
* parameters : none
FORM display .
IF alv_list = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* i_callback_pf_status_set = c_pf_status
i_callback_user_command = 'USER_COMMAND '
* it_events = t_alv_events[]
it_fieldcat = i_fieldcat[]
TABLES
t_outtab = t_itab1[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
IF alv_grid = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* i_callback_pf_status_set = c_pf_status
i_callback_user_command = 'USER_COMMAND '
it_fieldcat = i_fieldcat
TABLES
t_outtab = t_itab1[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " display
*& Form : vbeln_validate
* description : to validate sales document number
* parameters : none
FORM vbeln_validate .
DATA: l_vbeln TYPE vbak-vbeln.
SELECT SINGLE vbeln
FROM vbak
INTO l_vbeln
WHERE vbeln IN s_vbeln.
IF sy-subrc NE 0.
MESSAGE 'ENTER THE VALID SALES DOCUMENT NO:' TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " vbeln_validate
*& Form :build_fieldcat
* Description : This routine fills field-catalogue
* Prameters : none
FORM build_fieldcat TABLES fpt_fieldcat TYPE slis_t_fieldcat_alv
USING fp_field TYPE slis_fieldname
fp_table TYPE slis_tabname
fp_length TYPE dd03p-outputlen
fp_ref_tab TYPE dd03p-tabname
fp_ref_fld TYPE dd03p-fieldname
fp_seltext TYPE dd03p-scrtext_l
fp_col_pos TYPE sy-cucol.
*-- Local data declaration
DATA: wl_fieldcat TYPE slis_fieldcat_alv.
*-- Clear WorkArea
wl_fieldcat-fieldname = fp_field.
wl_fieldcat-tabname = fp_table.
wl_fieldcat-outputlen = fp_length.
wl_fieldcat-ref_tabname = fp_ref_tab.
wl_fieldcat-ref_fieldname = fp_ref_fld.
wl_fieldcat-seltext_l = fp_seltext.
wl_fieldcat-col_pos = fp_col_pos.
*-- Update Field Catalog Table
APPEND wl_fieldcat TO fpt_fieldcat.
ENDFORM. "build_fieldcat
*& Form : download
* description : To Download The Data
* Parameters : none
FORM download .
DATA: l_file TYPE string.
l_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = t_itab1
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download
hope it will help you
regards
rahul -
Get all file names in a folder, set each as text variable
First off, I do not know if this is possible.
For an app I'm writing, I need it to get a list of all the file names inside of a folder, then set a text variable for each of the file names. The app will then display a list of those items, which I know what to do from there.
If anyone knows how I would be able to do this, or alternatives, I would be extremely grateful.
Thanks in advance!just use any colon separated path (i.e., the desktop would be {color:blue}HD:Users:yourname:Desktop:{colors}) basically, path specifiers come in a number of types:
# text designations - HD:Users:yourname:Desktop (just a normal text line)
# posix designations - /Users/yourname/Desktop (how unix expects paths to be written)
# alias designations - alias "HD:Users:yourname:Desktop" (a pointer to an actual, existing file system element
# file system referents - file "HD:Users:yourname:Desktop:somefile", folder "HD:Users:yourname:Desktop", etc -
# file system objects - Folder "Desktop" of folder "yourname" of folder "Users" of disk "HD"
each has its advantages and disadvantages, and you can coerce between them (though not completely - you need to convert #5 to text before you can convert it to #3, for instance. -
Unable to restore System Recovery Files in desktop folder
I owned an HP Pavilion A6037C desktop computer (Running Vista). It began to give me serious issues in July so i used the HP System Backup and Restore program to create a backup of all my files. i saved these files on an external HD so i wouldn't lose my files if the computer crashed. This backup was created in a folder called MINWINPC. In that folder was this file name "Backup Files 2011-5-7 234595". in that folder was a file list
Backup.001.App
Backup.002.fbw
Backup.003.fbw
Backup.004.fbw
and so on ....
I have since removed the first computer (although i still have it in my posession), and have replaced it with an HP Pavilion P6245f desktop running Windows 7.
Now that i have a newer desktop in place i wanted to install some of my old files from my backup that is saved on my external hard drive. i've connected the external hard drive to the new computer and i've ran the Backup.001.App. It restored my old files to a folder on my desktop called "Shortcut to System Recovery Files". It's a rather large file (i believe 50 GB) that is stored in another folder titled "C". In this folder i can see the seperate file folders i'm assuming were from my original desktop. when i access my username and select for instance "My Pictures" folder, it shows a list of all my orginal files. When i double click a picture, it says :
"File not readable. You can not open this file. Please check the readability of this file."
when i try to open any other type of file (such as .pdf's or word documents, or spreadsheets), it basically says the same thing.
"Can not access the document C:\(filelocation). The document may already be open or a read only document. The name and path may be invalid. The document may no longer exist, or it may already be open".
PLEASE HELP All i want to do is restore my pictures, documents, and emails . HOW CAN I RESTORE THESE FILES TO MY NEW COMPUTER ????????I owned an HP Pavilion A6037C desktop computer (Running Vista). It began to give me serious issues in July so i used the HP System Backup and Restore program to create a backup of all my files. i saved these files on an external HD so i wouldn't lose my files if the computer crashed. This backup was created in a folder called MINWINPC. In that folder was this file name "Backup Files 2011-5-7 234595". in that folder was a file list
Backup.001.App
Backup.002.fbw
Backup.003.fbw
Backup.004.fbw
and so on ....
I have since removed the first computer (although i still have it in my posession), and have replaced it with an HP Pavilion P6245f desktop running Windows 7.
Now that i have a newer desktop in place i wanted to install some of my old files from my backup that is saved on my external hard drive. i've connected the external hard drive to the new computer and i've ran the Backup.001.App. It restored my old files to a folder on my desktop called "Shortcut to System Recovery Files". It's a rather large file (i believe 50 GB) that is stored in another folder titled "C". In this folder i can see the seperate file folders i'm assuming were from my original desktop. when i access my username and select for instance "My Pictures" folder, it shows a list of all my orginal files. When i double click a picture, it says :
"File not readable. You can not open this file. Please check the readability of this file."
when i try to open any other type of file (such as .pdf's or word documents, or spreadsheets), it basically says the same thing.
"Can not access the document C:\(filelocation). The document may already be open or a read only document. The name and path may be invalid. The document may no longer exist, or it may already be open".
PLEASE HELP All i want to do is restore my pictures, documents, and emails . HOW CAN I RESTORE THESE FILES TO MY NEW COMPUTER ???????? -
What are the text files that suddenly showed up in the Preferences folder?
I just noticed a group of text files in the Preferences folder that I haven't noticed before. All of them were created within a 3-minute period on 12/31/2008. The names are in sets of 4 or 5 that follow this scheme:
np_334572current
np_334572services
np_334572servicesnew
np_334572sets
np_334572system
The default app to open these is Property List Editor.
They haven't been modified since they were created, even though I've been adding, deleting, and modifying apps and their preferences since then. Anybody know what they are? Can or should I delete these?
Thanks in advance.Dick,
To be honest I don't know what program they are related to. However If the files are located in ~/Library/Preferences (Where is ~ = your home directory) Then You should be safe in moving/deleting them, at worst you will have to reset the settings in one of your apps. What that folder is mainly used for is say for example you have your dock show/hide it self. That will be saved to a plist file in the preferences folder. If you delete or move the dock's plist out of there your dock on your next login will go back to the default view of Mac OS.
Now To be honest you don't have to move/delete those files that are there, especially since at most you will probably reset some of the preferences you set in an application. But its up to you. Also you could always move it first to see what app it is and either move it back or delete it later.
Hope that helps,
Weston -
Output folder contents into text file
Hello, everyone.
I am new to automator, and I'd like to learn how to use it. Recently, someone asked me if there was a way that they could select a folder and somehow dump the filenames of all items in that folder (non-recursively) to a text file. It seems to me that this is the sort of thing that Automator would be able to do. Can anyone give me some tips on how I might go about doing this?
I also figured this might be possible with a custom bash command. I am more experienced with bash and Unix command line, so if there is a better option there, please let me know. I just figured I would check here first.
Thanks!That does work, but the only problem is that the folder who's contents are being exported will be different every time. (I see now that I didn't specify that in my first post). Ideally, he would either be given an option to select a folder to read, or he would just be able to drag and drop the folder onto an application (or into terminal) and have it perform this task.
Maybe you are looking for
-
Hi, I have to manage floats with euro format . here's the code : <CODE> float first = 78.31; float second = 1.81; float tot = first + second; </CODE> the result of thi addition is tot = 80.11999...... sigh!! how can i round up this number with 2 digi
-
Entity Attribute Validation via XML
We have an Entity object with 2 attributes. I'm trying to setup a new validation rule for attribute B that forces it to be GREATER THAN attribute A. It seems that the only way to accomplish this is by using a MethodValidator. The most obvious choice,
-
How do I totally remove all adobe products and associated material from my Macintosh computer?
The title is my question. (not allowing me to simply copy what I wrote is part of why I've grown to hate Adobe so much!)
-
Hello I have a question relating to RADIUS CoA Port Bounce. I'm planning to deploy 802.1x with ISE 1.3 to: 802.1x authenticate corporate desktop PCs (with anyconnect client installed for user and machine authentication) - on successful machine authen
-
How to remove and replace keyboard on HP Touchsmart Notebook 15-D020NR
I spilled a drink on my keyboard and now I cannot get the Caps Lock to turn off and a number of keys do not work. I need the instructions on how to remove and replace this no frame keyboard. Thank you.