Desktop folders/icons moving when awakening from sleep

When I open my laptop and it awakes from sleep, it moves some of the folders around on my desktop. What's going on?

proceed at your own risk...
heres what i found. go to HD>Users>'owner'>Library>Prefs find and delete com.apple.desktop.plist
that seemed to work for me. who knows...im kind of riffing right now.

Similar Messages

  • Macmini 2011 on lion, goes to a blue screen om monitor when awakening from sleep mode, last 3 or 4 seconds, can anyone help? Thanks

    Macmini 2011 on lion, goes to a blue screen on monitor when awakening from sleep mode, last 3 or 4 seconds, before desktop appears, can anyone help? Thanks

    Depending on the system configuration, this may not
    be unusual.  The Mini that I use for my home theater,
    which is connected to a receiver then to a TV, all via
    HDMI usually takes a couple seconds to come up just
    the way yours does.  Same happens when I switch sources
    on the receiver.  Actually, it starts with the blue screen and
    will sometimes flash before the desktop comes up.
    It seems that when HDMI goes dormant, there is handshaking
    that needs to be re-established, at least thats my SWAG on it.
    On the other hand, the Mac Mini Server that I use as a work
    station and is connected to a Thunderbolt Display, wakes to desktop
    in a second, maybe two.  On this combo, it just comes up to
    the desk top.
    It also probably depends on what processes were active when
    the Mini was put to sleep.  So it may take some time for it to get around
    to reloading the desktop.

  • Spinning beach ball when awakening from sleep

    I get the spinning wheel when awakening from sleep. Also my fans seem to be running a lot more than they used to.  I've tried resetting SMC and PRAM.  I recently installed a Crucial 256GB M4 SSD and enabled TRIM--not sure if that had anything to do with it.  Running OS X 10.7.4 and have the latest updates. This is on an early 2011 MBP with 16GB RAM.
    Anything I should do or check?
    Thx

    Seems to be a problem with the hard drive. Ok prior to 10.5.2. Affected drive: Fujitsu MHV2100AT PL 100gb

  • Rustling/Static-like sound when awakening from sleep?

    It seems to be coming from the speaker, the left side I think, and it definitely isn't the sound of the drive spinning up.
    Anyone know what this issue is, how to fix it, or if it is a sign of a more serious problem?

    I've got the same issue, though I don't really worry about it - it's definitely coming from the speakers - when I awaken it from sleep I can hit the volume buttons and it'll get louder/softer. Unfortunately, I'm not sure why it does that - you're not alone, though it doesn't seem like a serious problem.

  • Desktop folders + icons moving after startup

    Some (but not all) folders and icons on my desktop change position each time I start-up. It is always the same folders & icons and they always move to top right of my screen. How can I stop this? It make no difference I use sort by > align to grid or none.

    Same here Bonamy. Are the icons that move by any chance network-connected folders or drives? Seems for me that if there is a hiccup in connection, then icon is created anew next time it sees the connection made. I'll keep sniffing.

  • New iBook, kernel panics when awakened from sleep

    I've been going nuts for several weeks now due to issues with my new iBook G4. When it is not plugged in, it may be fine when it wakes from sleep, or else it may wake to a black screen of death or else wake up and then freeze (requiring a restart) a few seconds after waking up.
    I've reset the PMU several times, removed the third-party RAM (which I thought resolved the issue, until two crashes today when waking up unplugged), reset the PRAM, ran Disk Utility, did an archive and install of 10.4.2, etc. For a day, it would also go through infinite wake/sleep cycles when plugged in with the lid closed, but it resolved on its own within 24 hours. I was all set to send it in to Apple when the issue resolved itself on its own.
    But I'm stumped as to the nature of the kernel panics/freezes, etc. They only happen when the iBook is unplugged from AC, USB, etc. and it is not 100% predictable. It may happen the second time I'm waking it up after not being connected to anything. Or it may be fine.
    Here's the panic log from today, the details of which are identical to the panic that happened an hour earlier:
    Mon Nov 7 16:53:11 2005
    panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 000000000068E0B8, msr = 0000000000149030, dsisr = 42000000, dar = 00000000218B8000
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 00000000fff00000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
    Proceeding back via exception chain:
    Exception state (sv=0x2CEEAA00)
    PC=0x0068E0B8; MSR=0x00149030; DAR=0x218B8000; DSISR=0x42000000; LR=0x006B8C14; R1=0x0D113D70; XCP=0x00000008 (0x200 - Machine check)
    Backtrace:
    0x00033384 0x006B8C14 0x0003C744 0x000A9814
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.AppleAirPort2(402.6)@0x675000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x5a3000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
    Exception state (sv=0x20EEFA00)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Suggestions? Is this really a hardware issue relating to the AirPort card, or is it something related to kernel extensions? It does not appear to be a user folder-related issue (I tested that as well). Thanks!

    I've been having similar problems with my iBook G4/1GHz computer. I haven't yet figured it out when or why it crashes after sleep, but this is sure: everytime there is USB mouse connected, it does that crashing. I bought mighty mouse to make sure, it wasn't the mouse which caused the problems. But no, it wasn't the mouse.
    I've tried to google some solutions, but haven't found any. This is very annoying problem. Anyway I can get that crashlog after reboot?
    Symptons:
    When lid is opened, fan's are started, but no picture or network connection or anything is alive. Display is black. Requires reboot to get it up and running again.
    I have run hardware tests on processor, usb, video ram and ram and all have passed.

  • Yoga 2 Backlit Keyboard resets to "Off" when awakening from Sleep mode?

    My Yoga 2 turns its backlit keyboard off when it goes to sleep and awakens . . . is there a way to set it as always on?  

    The fan seems to be running alot as well and the MBP isn,t that old only 6-7 months at the outside , could it be anything else possibly or do you definately think it is the Crashing issue

  • HELP! My iMac freeze when awaken from Sleep mode

    Its unusual... I think its because of the updates. I have the latest version of Leopard. Can anyone help? I hate to reboot my machine as i heard its not good to do often.

    Hello xoxo:
    That is not normal.
    This article will explain how to reset the System Management Controller (SMC):
    http://docs.info.apple.com/article.html?artnum=303446
    If that does not help, I would take the computer to either en Apple store or to an Apple-certified technician for diagnosis.
    Barry

  • Desktop Wallpaper Screensaver Bug? [When waking from sleep]

    I'm not sure if this topic is in the correct category but it seems to fit.
    I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
    However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
    Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
    Thanks.

    I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

  • Keychain is read-only when waking from sleep

    So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

    Hello-
    Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
    7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
    7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
    7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
    7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
    7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
    7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
    7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
    7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
    7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
    7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
    7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
    7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
    7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
    7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
    7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
    7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
    7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
    7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
    7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
    7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
    7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
    7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
    7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
    7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
    7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    7/10/13 6:53:14.354 AM configd[18]: network changed.
    7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
    7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
    7/10/13 6:53:18.519 AM blued[65]: Read version 2 info.  Number of devices:2
    7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
    7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
    7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
    7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
    7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
    7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
    7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
    7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
    7/10/13 6:53:20.635 AM kdc[54]: label: default
    7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
    7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
    7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
    7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
    7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
    7/10/13 6:53:24.499 AM digest-service[87]: label: default
    7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
    7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
    7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
    7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
    7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
    7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
    7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
    7/10/13 6:53:25.671 AM kdc[54]: KDC started
    7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
    7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
    7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
    7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
    7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
    7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
    7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
    7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
    7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
    7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
    7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
    7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
    7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
    7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
    7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
    7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
    7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
    7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
    7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
    7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
    7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
    7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
    7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
    7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
    7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
    7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
    7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent  absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503  root: no
    7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
    7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
    7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
    7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
    7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a]  @ 0x0x7fe8b9e31660 because it's already been started.
    7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
    7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
    7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

  • Kernel panic when waking from sleep

    My eMac (1Ghz, 256 Mb RAM, dual boot OS 9.2.2/OS X 10.2.8(upgraded from 10.2.4)) has a recurring but intermittent issue where it suffers from a kernel panic when waking from sleep.
    In the past I managed to fix the issue by resetting PRAM and NVRAM, but this doesn't seem to work anymore.
    Things I've found out until now:
    - Apple Hardware Test and Techtool Deluxe can't find anything wrong (all tests are passed).
    - No kernel panic log is written - apparently the kernel panic occurs before the log can be written.
    - Crash appears to be network-related. My IP address and network card address are shown at the bottom of the panic window.
    - After restarting, Finder windows revert to a state from two or three days ago...
    - Login items aren't the problem. I removed them all - this doesn't make any difference.
    - no weird things in the startup items folders, AFAIK.
    I'm on the verge of reinstalling OS X, but I think I already did this a couple of years ago, and it didn't help.
    Please help.
    Thomas

    Nominally, you'd download the OS X Update Combo 10.2.8 after reinstalling 10.2.4, then use Software Update to identify any additional security and other software updates. There was an issue with early builds of 10.2 failing the 10.2.8 udate if done directly, but working fine if one first updated to an intermediate version such as 10.2.6; I think that problem affected 10.2 through 10.2.3 and your 10.2.4 should be good to go directly to 10.2.8, but if there are any problems, you can go back to 10.2.4, then search the Apple Downloads link for 10.2.6, then 10.2.8
    With 10.2.x, it's prudent to run Repair Permissions after each OS and security update before moving on to the next.

  • X220 very slow reconnecting to WiFi when resuming from sleep

    So my X220 with the Intel 6205 card is having issues reconnecting to WiFi when resuming from sleep or hibernation. It takes about a minute for it to do so, though occasionally it will reconnect right away. Maybe 1 out of 20. When doing a cold boot or restart, it connects immediately upon the desktop showing up.
    This was not always the case, in fact when I first got my X220 in June, I have not had this issue.... In fact, I don't know when it started happening, but it was maybe a couple months ago. I just thought it was my old router going bad. Well I got a new router, and it still happens. I have the latest Intel WiFi drivers from Lenovo, and I even tried downgrading to the previous driver from Intel's site. Still the same problem. I tried setting a default profile in access connections, and that does not help. In fact, it behaves the same way if I totally uninstall access connections as well. In fact I tried this on three different brand routers, and I can reproduce it on all of them (Asus, Netgear & TP-Link) so I think this is not a router issue. Other devices in the house reconnect right away with no issues (iPhone 4, PS3, Mac desktop, Dell laptop).
    I currently have BIOS 1.24, but this was happening with 1.21 and 1.23 as well. My X220 originally came with 1.16, and I haven't updated it until 1.21. Unfortunately I don't remember that far back, if the problem started occuring then.
    There was a brief discussion about this in another thread, but it went nowhere so perhaps this will get more attention. At least one other user reported the same issue.
    Here's a clip of exactly what happens. When i press the button or open the lid from sleep, the windows wifi icon will start spinning for a few seconds, then turn into an X. then only about a minute later, does it quickly connect to the wifi and I have full signal. Manually clicking on the icon and selecting the access point does not speed up the process. It will only connect when it wants to, about a minute after resuming from sleep/hibernation.
    http://youtu.be/dmboeA7HBgg
    | X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
    Solved!
    Go to Solution.

    Normally when a laptop running windows tries to connect to a network, it may also seek to identify certain components on the network, for example, asking the router "Who are you?". In your case, maybe the config are corrupted because the network address entries are messed up. Queries send out to the network come back with no replies, and the computer waited for the default time till timeout and it gives up.
    Try this one at a time, reboot, or try all at once and reboot
    TCP/IP stack repair options for use with Vista or 7.
    Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.
    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
    Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
    Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
    Reboot the machine.

  • When waking from "sleep" screen turns grey under the pointer and the computer is effectively dead. Have to hold power 'off' for five seconds to regain computer.

    When waking from "sleep" the screen appears normal but, the pointer leaves a trail of grey as it moves and the whole screen will turn grey if I keep moving the pointer. The computer is effectively dead. Have to shut down by using power off for six seconds and then re-starting. I know little about computers!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • My MBP doesn't remember my Time Capsule wireless network when waking from sleep

    My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep.  Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password.  This is very cumbersome.  And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem. 
    It appears that this problem has to do with the hidden SSID.  I don't need the lecture on how hidden SSID provides no serious security benefit.  That's why I have the WPA2 encryption.  I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
    Solutions I've alread tried:
    1. Open Network Preferences
    2. Select Airport from left hand column (and ensure Airport is at top of that list)
    3.  Select Advanced
    4.  Delete all Preferred Networks.
    5.  Apply settings.
    6.  Restart computer
    7.  Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
    This solution works fine as long as I don't take my computer elsewhere and connect to another network.  As soon as my preferred networks list gets another network, my MBP stops finding my TC network.  Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
    As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network."  Thus, I assume the problem lies with the Time Capsule.
    Any ideas?

    LaPastenague, thanks for weighing in.  Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently.  With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
    To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
    When an SSID is hidden, the base station does not broadcast its identification.  Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
    The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
    Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality?  Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP?  And once broadcast by the MBP, the TC should detect and reply? 
    Basically, the MBP can connect to the hidden TC manually just fine.  The MBP can connect to the old setup automatically just fine.  The MBP cannot connect to the TC automatically.  Aren't these automatic connection functions solely on the MBP?
    I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
    Z

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Maybe you are looking for

  • Content type at web application scope

    Hello Is this possible deploy content type at web application scope feature? (I want activate content type at all site collections)

  • Creating a hierarchical options in the SelectManyChoice component

    An article here by Frank explains how to create a heirarchical options in SelectOneChoice component. In my case I wanted to implement the same using the SelectManyChoice component. The challenge here is that once I select a parent choice, all its chi

  • Create material from reference material for all org.levels

    Hi, i want to create a material from a reference material with all MARA, MAKT, MARC, MBEW, MARD, MARM, MVKE, MLAN, MLGN and MLGT content for all organizational levels of the reference material. For instance, my reference material has 200 MARC entries

  • Export info about all images

    How can I export the following info about all images in an InDesign document: Page image is on Image name Image full path Image location on page (x, y) I would like to export this data to a txt or csv file with data for each image on a separate line.

  • Proposed source of supply price showing  expired price in the cockpit

    Hi All I created a material contract . Mat Master no - 34567  Condition 198 USD - 31.03.2010  TO 08.04.2010 and  208 USD  09.04.2010  TO 31.12.99999 on 9 th April 2010 . i go to cockpit and when i propse a source of supply contract shows 198 usd inst