Desktop has slow /no internet connection after wireless installation of photosmart 6510 b211a

printer works properly from desktop running vista 32bit and notebook running xp.
no error message.
have run hp network diagnostic tool.
the tool reported "software not found" on desktop and also notebook.
reinstalled software on both to no avail.
wireless internet connection on notebook is working properly, albeit a little slower than usual.
internet connection on desktop which has the router connected is extremely slow to the point of not connecting at all sometimes.
any help would be appreciated.

try to download and run this wizard below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-100441-1&cc=us&dlc=en&lc=en...

Similar Messages

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

Hello jessie029, and a warm welcome to the forums!
What browser do you connect with?
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tige
How to Flush DNS in Mac OSX using the Terminal.
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
lookupd -flushcache
Reboot.

Apple programs will not recognize Internet connection after Tiger upgrade

In January, I posted the question below. I wanted to update it, but this site has archived it and will not allow responses. In the hope that I may help someone else, I am repeating my question, now that I have the answer.
===============================================
ORIGINAL PROBLEM
Last week, I upgraded from 10.3.9 to Tiger. Ever since then, I have had trouble using Apple's programs that require internet usage: Safari, iTunes, Software Update, etc. All of these programs think I am not connected to the Internet. But I am; I can use Netscape, Internet Explorer, and other non-Apple programs on the web.
Furthermore, it's not consistent. Sometimes Safari will recognize the connection. I'll be using Safari, looking up websites, when suddenly it will quit connecting, giving me the message, "Cannot connect to the server," no matter what server it is, even apple.com (so I have to use Netscape to access my .Mac and this Support screen).
How can I resolve this?
==============================================
The problem was that my Earthlink Access software was setting a proxy on my connection. Netscape & Firefox worked because they ignore any proxies; the Apple programs (plus Shiira and Internet Explorer) didn't connect because they use the proxies.
Why did it sometimes work? Well, if I first used Safari to go to a secure website of my bank, somehow that opened up the connection and then I could continue to use the Internet and Internet based programs like iTunes and widgets. However, if I tried to use an Internet-based program before going to the secure site, then it wouldn't work.
After months of phone calls and e-mails and sending data packets and all such stuff with Apple Care, they finally stumbled upon this answer: Uncheck the proxy box. And that did it. At first I had to uncheck it every time I started up the computer, but now it stays unchecked and I can use my Apple programs with no trouble.
I just wanted to share this with you in case you also had trouble with Internet connections after upgrading to Tiger, because I did see several other people had this same trouble.
Movable flat-screen iMac G4 Mac OS X (10.4.6) 1.25Ghz processor, 256 MB memory (DDR SDRAM)

For the record, could you state each Proxy box you ended up unchecking please? I'll attempt to submit a user tip with credit to you for finding this solution.

MBA loses internet connection after waking from sleep

I have a new Macbook Air running Mavericks and new 802.11ac Airport Extreme router.
My problem is that the MBA drops the internet connection after waking from sleep. I tried the solution offered by the OP, but it didn't work.
In my case, here's what I have to do to get a connection again. I open the Network preference pane, and then choose "Assist me..." and then "Diagnostics". Invariably it will show a green light beside Wi-Fi, Wi-Fi Settings and Network Settings. I have 5 bars showing in the WiFi menu bar icon. But ISP, Internet and Server will be yellow.
When I go through the steps prompted by the wizard, the ISP/Internet/Server lights turn green on the third screen where I select the wireless network I want to join.
It seems as if it's connecting to the WiFi network when it wakes from sleep, but losing the internet connection?
Note: I have a new iMac as well running Mavericks and don't have this problem with it.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Lost internet connection after installing BT dongle (MS-6967)

I have tried installing the MSI Bluetooth USB dongle (MS-6967) drivers twice. I tried the 1.3.1 version and the 1.4.2 version drivers. The Bluetooth dongle itself works fine, but both times I lost my internet connection after installation. After this I have to remove the drivers and repair my installation with the Windows CD, but then windows and all of my programs also need to be updated again since my original Windows CD is a first release version.
The weird thing is that I can connect to other local computers and I can even ping external computers, but browsing websites (on IP address), looking up domain names and retrieving mail are no longer possible. I have no firewall software installed.
Does anyone konw how to fix this?

Am I really the only one with this problem? Well I have seen someone else on another forum ...
Maybe someone knows how to reinstall just the TCP/IP stack?
I'm using a notebook with buil-in network card. It runs W2K dutch version SP4 and things worked before when I was using SP1. Somehow it doesn;t work now anymore. Before I start reinstalling everyting again, I just want to check once more if anyone has some tips for recovering.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

TS3276 On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I've lost internet connection after a power outage; how do I restore?

I've lost internet connection after a power outage; how do I restore?

Check with your internet provider for help. Your modem or router could have been damaged if they did not come on after the outage. If your modem and router look OK all you should have to do is restart your iMac.

IMac keeps on loosing internet connection after a few minutes...

Intel dual core iMac with 10.6.8 OS keeps losing internet connection after a few minutes. Need to put it to sleep and bring it up again. Than it works again...for a few minutes. Other equipment like laptops and iPad using same wifi internet connection and have no connectivity problem at all... What to do?

Then what I suggest that you do is go to the Finder and select Mac Help in the Help menu. In Mac Help go to Index>C>Connect to the Internet. There you can read all about configuring your Mac, using a modem, etc. After you better understand how all that works then come back with your questions.
Dah•veed

HP Photosmart 6510 B211a Not Functioning Correctly After Power Outage

Hi Guys,
I'm new to this forum but I'm hoping someone can help me.
I have an all-in-one HP Photosmart 6510 B211a that has been working like a dream since I got it last Winter. We had an unforeseen power outage yesterday however and once the power came back, the printer insists that there is no ink in the system. I fear the worst and think its brain may be somewhat scrambled.
I replaced two of the ink cartridges just last week with genuine HP ones and everything was fine. My ink levels are nearly low on the other two but I have not replaced these yet as there is no need.
Once the power came back, the printer informed me that the magenta ink was 'missing or damaged'. I removed the cartridge, cleaned it with distilled water and dried it. Once replaced, the printer changed its mind and told me all ink cartridges are now 'missing or damaged'. When I opended the printer again, the ink carriage did not automatically move as normal to allow me to change or remove the cartridges.
Furthermore the touchscreen on the printer will not allow me to exit this error message or perform any other function such as head cleaning. I have tried a soft reset and a hard reset but this has proved fruitless.
Is it knackered? Should I toss it and head to the shops again?
Thanks for reading this,
Brendo
This question was solved.
View Solution.

Hi Rich,
I replaced the magenta cartridge yesterday and my printer is working successfully again! Woohoo!
My dad's an electrician so between us we've come to the conclusion that when the power came back on after the outage there was either an electrical spike or insufficient voltage than normal and this damaged the nearest ink chip to the power supply - the magenta cartridge.
All is well again anyhow.
Thanks for your help - I appreciate it

No Internet connection on wireless with WPA after 10.4.10 update

After the 10.4.10 update I can't connect to my network that uses WPA encryption. I'm able to connect to the router fine and ping computers and the router in my network but I can't view any websites. DNS to outside websites works too. I can view websites fine from my windows laptop connected via the same wireless router. Internet does work on my mac when I connect via my neighbor's open wireless connection so that's why I figure that encryption is the issue.
I have searched and read other posts on the forum and done what the recommened... I deleted the keychains related to my wireless router and deleted the router from my preferred networks then re-added the router. I have also run the permissions repair and reinstalled the 10.4.10 update. Nothing has helped.
I'm a mac newbie so if I'm missing any information that could help diagnose, please let me know.
Thanks!

I have a wifi-related problem with 10.4.10 as well. Everything works fine when I'm plugged in, but when I switch to battery power, I can use the network just fine for a while, and then I'm cut off. I'm still connected to my wireless network, but no data comes in. Data input is restored once for a brief period, but then it dies completely and the only solution is to reboot. I'm having this behavior on my C2D MacBook (2GHz, 2GB), and a workmate has been complaining about a C2D MBP and a C2D MB dropping their wireless connections after the 10.4.10 upgrade. So it seems like something's borked on the wireless side.
I'm going on a two-week trip on Sunday and in the destination I'll depend on the wireless, so anyone with a quick solution has just earned him/herself a beer

E3000 has slow Ethernet speed but ok wireless Internet speed

My Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings. I worked great then something changed. help me, my kids are revolting.
Solved!
Go to Solution.

admojo wrote:
My Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings. I worked great then something changed. help me, my kids are revolting.
Yup, check the firewall settings. Since you said firmware is updated, then you may need to reset and reconfigure the router.

I have a slow internet connection after the last update

Hello Every one,
I am facing a weird issue in my mac...
The internet connection is very very slow .. can you imagine that I wait a while to open google ??!!!!!
this problem has started after installing the latest JAVA update..
I cannot browse .. my internet Speed is 40MBS..
even the wifi is disconecting from while to while in my MAc ...
what to do ?!!!!!!!!!!!!
I've started hating my mac..

Same problem here. After installing the latest Java update from Apple (and also after disabling both Java in Safari and the Java plug-in in Firefox) in the past 2 days browsing the internet has become a veritable problem with download speeds practically at a crawl. I am on a MacBook Pro running on 10.7.3. What is going on?

HT1222 My internet speed has slowed to a crawl after installing security update 2015-003. Any ideas on how to fix?

I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not. Any ideas what may be causing the slow internet speed?

Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

Desktop has slow /no internet connection after wireless installation of photosmart 6510 b211a

Similar Messages

Maybe you are looking for