Desktop icons missing after wake up from sleep

I use my old Mac Pro with Lion installed controlled from my new Mac Pro in a setup with Apple Remote Desktop. Everytime the old Mac wakes up after a sleep all desktop icons is missing. I asume that they are "off screen". Further more all Finder dialogs will be hidden in the lower left corner of the screen and impossible to click on "ok" buttons.
I doesn't help to change the monitor resolution. I have been doing so many different things and been looking on the net for long time!
The old Mac runs Vienna Ensemble Pro and this app will not let you quit without "asking" again and again "do you want to quit" and so on. Finally I have to go to the computer room next to my studio and turn off the machine!!
Any hints to why this is happening and how to correct it is very much appreciated!

In another Mac forum saying that after the 10.7.1 update, need to reset the PRAM to get this issue solved.

Similar Messages

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

After update to 10.7.1, Wifi retrieved after wake up from sleep?

Anyone who had "no wifi after wake up from sleep @ MBA 2011 " issue before, is this fixed after 10.7.1 update installed? Any tester please drop your comment.

In another Mac forum saying that after the 10.7.1 update, need to reset the PRAM to get this issue solved.

9600M GT: 5W more power-draw after wake up from sleep?!

Hey Ladies!
I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
Looks like a bug to me?!

Hey Ladies!
I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
Looks like a bug to me?!

Macbook Pro Freezes after wake up from sleep

My Macbook Pro 5,5 with mountian Lion freezes after waking up from sleep. i have 8 GB RAM and did a hardware test wich was passed. I also have a SSD of 240 GB in the optical drive. this is my startup drive. Another HD is my workdrive. The first thing I see is that the Airport does not come back and it seems that is does not wake up. After that the whole finder freezes.
What can be the problem?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Application launches fail after wake up from sleep when switching from one open directory to another

I take my MacBook Pro back and forth from home to work. Open Directory is set up at both locations running on Snow Leopard server. These two locations are entirely separate domains and IP networks. The only thing that is the same is my username and password, which is the same in both locations.
If I put my machine to sleep in one location and move to the other location and wake it up, I can usually launch one application, then no other applications launch and the machine is pretty much frozen up except for mouse cursor movement. Using command-shift-escape and relaunching the finder doesn't help.
It is as if the launch daemon has been made inoperative. Apps just sit and bounce.
Should one be able to log in one one network with open directory. Close all applications, move to an entirely different network, and wake up from sleep and continue working? The login/password is identical on both open directory setups.
Both home and work are set up so the users can "travel" and the machines are not "bound" to the open directory server.
I've started using the "other" login box to login in which I think keeps the machine more independent of open directory and that seems to work better for moving between networks.
Any ideas and/or comment welcome.
(my DNS seems fine in both environments. running changeip gets "success" in both places)

After reading another post that popped up under "More Like This" after I posted this I may have found at least a temporary fix. Unplugging and reseating the MDP adapter in the MacPro didn't accomplish anything but unplugging/reseating the HDMI plug in the Viewsonic brought it back to life.
I guess I can live with this but it would be nice knowing that there's a more permanent fix for this.

Screen problem after wake up from sleep

About three weeks ago I posted a problem with the display coming back to life after waking up from sleep. I said this happened after the 10.5.2 update. This turned out to be not quite accurate. I actually ran all the waiting updates, so I really don't know which one to finger.
Today, I again ran the 10.5.2 update by itself. Everything is fine. Software Update then identified seven more updates to do, some familiar, some not. I have done all except one, one at a time, and have had no problems with the display coming on after the computer wakes up.
One more to go: Leopard Graphics Update. This is v1.0 for this update, and here is my question:
Before I run this update, and face another possible day-long re-install and re-update session, has anyone experienced the problem with the display remaining dark after running this update? I hate to do the update just to see if it causes the problem if there is some information kicking around about this.
Many thanks again for any help or comment.
Jim

Hi rohitgu,
Welcome to the Apple Support Communities!
I would suggest using the following article for troubleshooting the display flickering on your iMac. I would specifically Reset the system and Reset the resolution. I know you have done some good troubleshooting already. Have you reset the SMC as well as the PRAM? I also see that you checked the resolution on your computer, but have you started in Safe Mode and adjusted the resolution? Please use the following article as a reference.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
I hope this helps,
-Joe

Output volume at maximum after wake-up from sleep

Hi,
I very often find my sound output volume at maximum level after my MacPro (10.6.2) wakes up from sleep. And I always have it set at about 20%. An unexpected 100% is overwhelming loud... I have no idea how to solve it. Anyone with a possible solution?
Mr. Pen

I use a little Preference Pane called Startup Sound which lets you set a default startup chime level. It hasn't been updated for ages, nor tested on 10.6, but it seems to work fine. You could give it a quick test to see if it helps.

Firefox 14 in Win 7 slow after wake-up from sleep mode.

Firefox 14 is slow after waking up from sleeping. Symptoms: responses to scrolling, pointing & clicking (including close 'X') and tab switching delayed. scrolling not responsive, instead 'jumps' in large chunks. Resolution: close and re-launch Firefox.

Thanks for this problem. I need more info.

How to take a photo after wake up from sleep

There are two questions:
how to create an automator to take a photo by isight in silent mode.
How to run this automator during the machine wake up from sleep.
Thanks a lot.

How do you make iAlertU take a photo and email it to you whenever the computer wakes up? I only know how to use it when you "arm" it as an alarm, which can get annoying to do all the time. I just looked in their preferences and I don't think you can set it to email you a photo whenever it wakes up without being in alarm mode.

LX195 WHS High hardware interrupts after wake up from sleep

I have a HP-LX195 windows home server which is set to sleep every day between 2AM and 7 AM. On wake up from sleep the CPU usage is triggered to 35-40%. No tasks are executing during this period and if any they add up the original usage. Using process explorer notices these CPU utilization is due to hardware interrupts. Using kernrate noticed the high usage is on intelppm.sys.
I have determined this is due to sleep. If the server is kept running without sleep, the hardware interrupt is minimal on normal operations. But if i manually set the server to sleep and wake up, the usage triggers back to 35 or 40. The high cpu utilization doesn't go away until restart.
I have tested this with other LX195 and it seems consistent and repeatable. I have posted this on microsoft WHS forum as well. This doesn't happen with EX490.
Is it possible to get a fix from HP regarding the same. Thanks Raja

does hp support monitor these forums?

BSOD after wake up from sleep

I have upgrated RAM from 1x4 to 2x4gb recently. I noticed strange behaviour since then. It ONLY happens, when PC is on AC with baterry unplugged. When i close lid or simply make mi NB sleep, when i wake up after few seconds BSOD comes up. When I removed second 4gb ram modul, it didnt happen anymore, but i dont think that is due of additional RAM, because it happens only when on AC and battery removed. Should it be something with power management, or?
Any ideas?
Got T420, 4236P2G, OCZ Agility 3 - 120GB
T420 i7-2620M, 8GB RAM, NVS 4200M 1GB, OCZ Agility 3 SSD 120 GB + 500 GB HDD in Ultrabay, Windows 8.1 Ultimate 64bit

What antivirus are you running? I've seen exactly that behavior (BSOD a few seconds after wake) with an antivirus program on several of my machines.
I had to fully uninstall the AV to get it to stop the BSOD. Just turning it off didn't help.
This isn't likely but maybe worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Shared drives missing on wake-up from sleep

Following the Yosemite installation (clean) my MBP (late 2008) loses shared drives on the network when woken from sleep.
To give more detail, I have three TimeCapsules that are also used for shared data. One drive holds the iTunes library (now over 1TB in size) and the others are used for TimeMachine backups. Each drive has a shared volume on it, and it is these that "disappear" the following day when I wake the MBP from sleep. If I then restart the Mac, all the shares are back without issue. This only happens over night after the Mac has been put to sleep for an extended length of time.
When you run Airport Utility after the Mac wakes, it can 'see' the Internet, but none of the devices. Again, if you restart the Mac, Airport Utility then 'sees' the network correctly.
This looks to me like a power/network issue in Yosemite on older Macs.
Any one got thoughts on this?

As a work around, I have been keeping Airport Utility open all the time.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Loss of bluetooth connections after wake-up from sleep

Hi,
I upgraded to Lion on my Macbook Pro i5 2.4GHz yesterday. Now every time when I wake up the computer from sleep, my apple bluetooth keyboard and mighty are not responsive at all. Even if I click on "connect" one by one, they still do not respond unless I turn off the bluetooth of the Macbook Pro and turn it back on again. I'm not sure if anyone else has this problem too and would really appreciate a solution. Lion is great. But this bug is quite annoying.
Thanks in advance.
Doniel

1. Footnote to gtmagnet's suggestion:
I tried it (checking the option to allow Bluetooth devices to wake the computer), then I put my MBP to sleep. Then I manually switched off my Magic Trackpad (to conserve battery life). With the option in question checked, the physical act of switching off the Magic Trackpad immediately reawakened the MBP :/ (I appreciate that the MT automatically retreats into a low power state without needing to be switched off, but I prefer to get maximum mileage from my batteries).
That solution also didn't solve the original problem for me.
2. Footnote to CWL's suggestion:
I then tried that solution (removed the MT and then re-added it), but that didn't work either. Perhaps I need to be more aggressive in seeking out and deleting system files - but this makes me nervous.
So for now, I'm still having to reboot every time the MT fails to be recognised on awakening from sleep. It would be really nice if Apple could just get over its blushes and issue the first batch of bug fixes without any further delay

IMac Mid 2010 kernel panic after wake up from sleep mode

Hello.
One month ago starting my iMac Mid 2010 occasionally goes to kernel panic. When I click on mouse or press any key, system starting up, but very very slowly, (time on logon screen stay same without refresh) and after few minutes (from 1 - 10 minutes) kernel panic message is appear on screen. I have Mac OS 10.7.5 version installed.
Is there any tool to debug what is wrong. Windows OS has WinDebuger to detaily look inside to core dump and analyze it and in my experience almost allways is possible to detect root of problem.
First of all i was try HW diagnostic from DVD, succesfully passed. Then I run Permission Repair procedure, there were many folders and files with different ACL as system expected.
It is possible that graphic card driver is wrong or has bug from my point of laic view.
I have minimum application with kext installed into system:
VMware fusion
NTFS-3g ( long time same version )
There is part of long kernel panic message:
Interval Since Last Panic Report: 12304 sec
Panics Since Last Report:          2
Anonymous UUID:                    5D8F11DC-6A58-44A2-9C21-E43CFB9935BC
Tue Dec 4 22:05:16 2012
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f8161786d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff90fdb488, CR3: 0x000000007bb6201a, CR4: 0x00000000000206e0
RAX: 0xffffff801915a8c8, RBX: 0xffffff800c938300, RCX: 0xffffff801915a8a8, RDX: 0x0000000090fdb000
RSP: 0xffffff807ea237f0, RBP: 0xffffff807ea23810, RSI: 0x000000008e2cf520, RDI: 0xffffff800bac80c0
R8: 0x0000000000994000, R9: 0x000000000fff0000, R10: 0x0000000000000002, R11: 0x0000000000000001
R12: 0x00000000000000b6, R13: 0xffffff800c938300, R14: 0x00007fff90fdb480, R15: 0xffffff800bac80c0
RFL: 0x0000000000010286, RIP: 0xffffff7f8161786d, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00007fff90fdb488, Error code: 0x0000000000000003, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ea234a0 : 0xffffff8000220792
0xffffff807ea23520 : 0xffffff80002c4794
0xffffff807ea236d0 : 0xffffff80002da55d
0xffffff807ea236f0 : 0xffffff7f8161786d
0xffffff807ea23810 : 0xffffff7f81664262
0xffffff807ea23830 : 0xffffff7f81664984
0xffffff807ea23870 : 0xffffff7f81621b7d
0xffffff807ea23890 : 0xffffff7f815f93bb
0xffffff807ea238c0 : 0xffffff7f815fcf47
0xffffff807ea23910 : 0xffffff7f81630096
0xffffff807ea23960 : 0xffffff7f81647786
0xffffff807ea239b0 : 0xffffff7f816414bc
0xffffff807ea23a00 : 0xffffff7f81601477
0xffffff807ea23a40 : 0xffffff7f8163efdd
0xffffff807ea23a90 : 0xffffff7f81604a46
0xffffff807ea23b60 : 0xffffff7f81601afc
0xffffff807ea23bc0 : 0xffffff8000655f3e
0xffffff807ea23be0 : 0xffffff800065681a
0xffffff807ea23c40 : 0xffffff8000656fbb
0xffffff807ea23d80 : 0xffffff80002a3f08
0xffffff807ea23e80 : 0xffffff8000223096
0xffffff807ea23eb0 : 0xffffff80002148a9
0xffffff807ea23f10 : 0xffffff800021bbd8
0xffffff807ea23f70 : 0xffffff80002aef10
0xffffff807ea23fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.ATIRadeonX2000(7.3.2)[9B704AFE-AF23-381E-A057-5982532504F5]@0xffffff7 f815f8000->0xffffff7f818cafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cb3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c7a000
BSD process name corresponding to current thread: loginwindow
Mac OS version:
11G63b
Many thanks for any helping suggestion.
Mano

Here you are rest of KP message:
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 40019343425940
last loaded kext at 37729361423656: com.apple.filesystems.msdosfs    1.7.1 (addr 0xffffff7f80798000, size 57344)
last unloaded kext at 37908230931100: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.github.osxfuse.filesystems.osxfusefs    2.5.2
com.vmware.kext.vmnet    3.1.4
com.vmware.kext.vmioplug    3.1.4
com.vmware.kext.vmci    3.1.4
com.vmware.kext.vmx86    3.1.4
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AGPM    100.12.75
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.kext.ATIFramebuffer    7.3.2
com.apple.ATIRadeonX2000    7.3.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AirPort.Atheros40    505.67.1
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.kext.ATI4600Controller    7.3.2
com.apple.kext.ATISupport    7.3.2
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.driver.AppleUSBHIDKeyboard    160.7
com.apple.driver.AppleHIDKeyboard    160.7
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.8
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.06 GHz, 4 GB, SMC 1.64f5
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000AAKS-40V6A0, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa140000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfa142000 / 7
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
Mano

Desktop icons missing after wake up from sleep

Similar Messages

Maybe you are looking for