Desktop items get unsorted after cold boot on Snow Leopard 10.6.2

The Desktop items get unsorted after cold boot on Mac OS X 10.6.2 (Snow Leopard).
I have about 25 items (mostly aliases of files or folders) on the Desktop, sorted as vertical rows on left and right side of the screen.
When the issue hits, they all get located as vertical rows on the right side of the screen, unsorted in relation to their custom relative position before the issue.
Any idea? Thanks.

Hi ApMaX
According to wikipedia the .DS_Store files on Mac OS X contain the metadata for icon position and view settings. If the file permissions for the Desktop .DS_Store file were incorrect then one could assume that the icon position and view settings aren't being saved.
First let us check the permissions on the .DS_Store file for the Desktop we can do this by running the following command in Terminal (located in the Utilities folder)
ls -ld /Users/<<UserName>>/Desktop/.DS_Store
replacing <<UserName>> with the short name of your user account (name as viewed in the finder sidebar)
On my system I get the following permissions readout
-rw-------@
Further info on .DS_Store files: http://en.wikipedia.org/wiki/.DS_Store
If your permissions differ then we will look at correcting them.
J.C
Message was edited by: J.C

Similar Messages

  • Desktop items get unsorted after cold boot

    After a coldboot all icons are sorted in alphabetical order on the right side of the screen.
    It does not matter what the previous setting of "Arrange by" was, I have tried everything including "Snap to grid" and "Unsorted".
    Icon size, grid spacing, text size etc is not affected, only "Arrange by" (as in Desktop "View Options").
    It´s very annoying and hampering if you have lots of icons and the desktop is a main part in your workflow (like mine).
    I´m getting very frustrated and I am seriously considering downgrading to 10.5.8 again, but that will take most of the weekend and I will have to go back to running 2 separate systems for using Logic, Final Cut and Aperture, so it´s not a good option and something that I would rather not do.
    The best would be of course be, if some Apple engineers could spare some time and look into this. I have sent a bug report as well.
    In the meantime: Does anybody know if there is a way to automate the process of manually putting the icons back in their proper place or some other workaround?
    Note: The problem is mentioned here as well:
    http://discussions.apple.com/thread.jspa?threadID=2379700&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2335032&start=0&tstart=120
    http://discussions.apple.com/thread.jspa?threadID=2131820&start=0&tstart=0
    ---

    Free utility:
    Desktop Icon Manager
    http://www.macupdate.com/info.php/id/19789/desktop-icon-manager
    http://www.versiontracker.com/dyn/moreinfo/macosx/211425
    But Apple should fix this annoying bug!!!

  • MSI E350IA-E45 USB Not recognised after cold boot.

    Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
    And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work? 

    Quote from: mickas on 12-August-11, 20:09:58
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    How did you connect up the USB ports to 5VSB?
    I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
    This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
    So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • How do i get my videos from iphoto to work after I update to snow leopard?

    My videos were working fine, but after I upgraded to snow leopard my videos form Iphoto stopped working.  Also I noticed my mac is running really slow after the update.  Is there anything i can do to up the speed of my mac?

    my videos form Iphoto stopped working.
    Please clarify.  Exactly what happens when you click on the videos?  Any error messages?  What do they state?  The iPhoto users hang out in the iPhoto forums.  You may wish to cross-post there.
    my mac is running really slow after the update.  Is there anything i can do to up the speed of my mac?
    Did you repair permissions and restarted your computer after upgrading?
    How large is you HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac

  • My iMac will not boot through Snow Leopard but will boot through Windows OS

    My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
    Brian

    Possible scenarios:
    1: The 10.6.3 SL retail disk is bad, it happens.
    2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
    3: Your optical drive is funky or some other hardware issues.
    4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
    5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
    Possible solutions.
    1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
    http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
    2: Make a SL bootable USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
    If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
    1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
    2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
    3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
    4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
    My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

  • Mac Pro will not boot with Snow Leopard - need help!

    I have had a lot of issues with Snow Leopard since I upgraded from 10.5.8. Most of my problems started after installing Office 2007. I finally wiped the hard drive and reinstalled everything. No problems until last week. Start up was taking longer and had to reboot a couple of times because of grey screen. So I would just put computer to sleep. Yesterday the computer was frozen on screen saver with scrambled rows of pixels on screen two and the main monitor had a frozen image.
    I initially pulled all peripherals out and pulled the power plug for 5 minutes. I have left the peripherals out and pulled the second monitor as well. I tried pulling the power plug during a few more starts but nothing gets me to a complete start up screen.
    I have tried resetting PRAM and VRAM and tried a safe boot. I tried booting from Snow Leopard and my Leopard disk stayed on either a blue or gray screen with spinning beach ball (on gray screen).
    Put original install disk in and booted from using D to check the hardware. Good news is that the hardware test was OK. I did the extended test.
    All different kind of start up problems.
    - Some start with start up sound goes to Apple logo to blue screen to grey screen with beachball
    - Some start ups with no initial sound then Apple logo to blue screen to grey screen with no cursor or beachball
    - Some start ups with no sound to gray screen to blue screen to grey screen.
    I have no problem wiping the HD1 again but I can't even get the OS disk to be recognized with holding the C key during start up. This last time it went to a blue screen (holding the C key) and a cursor.
    I don't know what else to do - Please help!!!

    There are lists (MacIntouch and MacFixit) of hardware / software support issues with 10.6. Accelerateyourmac is another place to watch.
    There were some really long threads back in Sept about printer driver support.
    The 7300 firmware was more about Windows support; those cards are failing and dropping like flies (how DO they know 3 yrs has expired anyway?) and they don't support SL features like OpenCL etc so I'd invest in ATI 4870, best graphic card and works in all models Mac Pro.
    Lots and lots of bootable clones for backup. Never need to wipe and install again.

  • Dual Boot with Snow Leopard and Mavericks not possible?

    I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it -  but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

    When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
    "Volume Erase failed with the error:
    Could not unmount disk"
    When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
    "disk utility Info" when verinfying the secondary drive in the oprical bay:
    Verifying volume “Samsung SSD Daten”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Unused node is not erased (node = 40)
    Checking catalog file.
    Unused node is not erased (node = 30)
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Unused node is not erased (node = 8)
    Checking volume bitmap.
    Volume bitmap needs minor repair for orphaned blocks
    Checking volume information.
    The volume Samsung SSD Daten was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “Samsung SSD Daten”
    Error: Could not unmount disk

  • Replaced faulty hard drive now can't boot from Snow Leopard.

    Hi there,
    As it says I replaced my internal WD 250gb drive in my late 2006 2.16ghz imac . I followed the tutorials on the net to the tee yet upon trying to boot from Snow Leopard after firing it back up all I get is the Apple logo and the timer . I've tried holding C to no avail . I've held Alt to select the OSX disc yet it still won't boot to get me to Disc Utility . I've even put the old hard drive back in . When I hold Alt on start up it shows the drive and the disc but will boot from neither when selected . I've tried to get the Snow Leopard disc to eject so I can try my originals but it won't even do that . I'm convinced I haven't damaged anything but I'm at my wits end ! Does anybody have any ideas how to get the Leopard disc out so I can at least try from my originals ? The drive I've installed is compatible it's a 1tb WD . I also triple checked all the connections and they all seam sound . Really appreciate your help lads as I wanted to give the iMac to my daughter when we get a new one .

    You will first need to prep the new drive using Disk Utility on the original 10.4 Disc or Retail upgrade 10.6 DVD. It needs to be Partition GUID Partition Table and Format it Mac OS Extented (Journaled) before you can install and run OS X on it.
    1. Boot from your SL install DVD or Bootable Clone and open Disk Utility.
    2. Highlight the new HD in the list of drives and select the Partition tab.
    3. Under Volume Scheme select 1 Partition and click on the Options... button.
    4. Select GUID Partition Table in the drop down window and click OK.
    5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
    6. Once thats done, then you can do a clean Install, Restore from TM or a Bootable Clone.

  • IMac fell on the floor - Windows 7 boots up, Snow Leopard does not

    Hello everyone
    My first generation aluminium-intel-mac fell off a small stool I carelessly placed it on. Interestingly, pressing the option-key and booting up windows after turning on the power works just fine. Trying to boot up Snow Leopard however won't get me past the loading screen. Also, there's this odd clicking noise every few seconds.
    I've tried the following:
    Starting up in safe mode -> loading screen
    Resetting NVRAM -> loading screen
    Booting from the Snow Leopard Install disk -> loading screen
    Help!

    That odd clicking sound tells me you damaged your Hard Drive when you dropped it. Take it to an Authorized Apple Service Provider.

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

    I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
    I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

    No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
    If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
    going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
    If you have a Time Machine backup you may also be able to use that to retrieve them.

  • Fastest mini to dual-boot Lion & Snow Leopard?

    I do software testing and currently have an iMac set up so I can boot either Snow Leopard or Lion.  For space reasons, I'd like to get rid of the iMac and get a mini instead, but it looks like the current models won't boot Snow Leopard (true??).
    So what's the fastest older model that would serve my purposes.  Or should I just forget about it?
    Thx

    Find a mid-2011 model that was delivered with Snow Leopard. You might be able to find one in the Apple refurbished systems on the Apple store web site, or possibly via an online retailer that still has stock.

  • Unable to set up a dual boot for Snow Leopard and Lion

    I'm running an early 2011 MacBook Pro.  I originally ran this machine with Snow leopard for quite a while.  I've got 8 GB RAM and lots of free space on my hard drive.  I upgraded to Lion and it works well.  But I want to boot to Snow Leopard from an external drive to run some old Rosetta apps.  However, I couldn't run the Snow Leopard installation disk on the Lion Machine.  When I tried to boot to the installation disk, I would get a beeping sound during startup, three beeps in a row - repeating, and it would not boot.  So I connected the external to another machine running Snow Leopard and I installed a new version of Snow Leopard on the external drive.  But my Lion machine will not boot from that external.  I am able to select the Snow Leopard drive in the Start Up Disk pane in the prefs. But when I restart, I just get the three beeps.  I must be missing something here.  Any help would be appreciated.

    Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
    (67955)

  • QuickTime stopped working after installing upgrading to Snow Leopard

    Hi,
    I am using a MacBook Pro and was running Mac OS X Leopard, and QuickTime worked perfectly. After I upgraded to Snow Leopard I can´t get QuickTime to work. When I try to reinstall QuickTime for Snow Leopard it tells me it is already installed.
    How will I get it to work again?

    but now I can not open QuickTime at all.
    I hate to ask, but what does this mean? Are you double-clicking or "drop" opening a movie and no player is opening? Are you simply clicking on the application icon and no player is opening but the application name does display in the top-left area of you monitor? Do you get a modal message saying something is wrong or saying the application quit unexpectedly while opening? Please try to be more specific regarding what is actually taking place as this may provide additional clues as to whether the problem is in the application, the operating system, 32-bit/64-bit mode switching/access problems, missing playback components for 32-bit routines, component list ordering conflicts, etc.

Maybe you are looking for