Desktop Manager 6.1.0b034 crashes w/ Bold 9900 since yesterday

Hi everyone,
I'd like to ask for your assistance in finding the source of my problem here.
I'm sitting on a Win XP SP2 Machine with above mentioned DM installed.
Everything (synching Lotus Notes calendar and my phonebook) worked absolutely well until yesterday.
Now, whenever I hook up the phone the DM will crash after trying to connecting to the device.
When the phone is disconnected it starts up fine and I can navigate all areas. Once the phone is connected, it'll try to connect and then simply close.
Any ideas, suggestions on how to procede (log files etc)? I already reinstalled DM twice.
Thanks in advance!
GOATimes

%appdata%/Rim.Desktop.Exception.log
Should help identify the crash ...

Similar Messages

  • Desktop Manager 5.0.1 crashes on startup

    I installed the Desktop Manager 5.0.1 off the CD that came with my new Blackberry Bold 9700, after first using Windows Control Panel > Add/Remove Programs to remove the Desktop Manager 4.6 that I had previously installed with my old device. After installation, upon starting up Desktop Manager 5.0.1, the message "Before you begin, verify that your current Blackberry device is connected to your computer" appeared. Upon connecting my device to the computer, DTM 5.0.1 immediately crashed, with the message "Blackberry Desktop Manager has encountered a problem and needs to close."
    I tried a clean uninstall (KB02206) and then a reinstall, with the same results.
    The file Desktop_ERRORLOG.TXT at C:\Program Files\Research In Motion\Blackberry reads:
    DesktopMgr caused an Access Violation (0xc0000005) 
    in module DesktopMgr.exe at 001b:004e6535 CurrentThread:0000032C.
    Exception handler called in Desktop.
    Error occurred at 8/18/2010 22:19:02.
    C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe, run by molee.
    Operating system:  Microsoft Windows XP Professional Service Pack 3 (Build 2600).
    2 processor(s), type 586.
    35% memory in use.
    2000 MBytes physical memory.
    1281 MBytes physical memory free.
    3896 MBytes paging file.
    3292 MBytes paging file free.
    2048 MBytes user address space.
    1893 MBytes user address space free.
    Read from location 04480031 caused an access violation.
    Context:
    EDI:    0x04480025  ESI: 0x0603df98  EAX:   0x00000000
    EBX:    0x00000000  ECX: 0x04480025  EDX:   0x0544000f
    EIP:    0x004e6535  EBP: 0x0661f614  SegCs: 0x0000001b
    EFlags: 0x00010246  ESP: 0x0661f60c  SegSs: 0x00000023
    Bytes at CS:EIP:
    8b 79 0c 8a 51 04 50 57 50 88 55 08 e8 ca fe ff 
    DesktopMgr caused an Access Violation (0xc0000005) in module DesktopMgr.exe at 001b:004e6535 CurrentThread:0000032C.
    Exception handler called in Desktop.Error occurred at 8/18/2010 22:19:02.C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe, run by molee.Operating system:  Microsoft Windows XP Professional Service Pack 3 (Build 2600).2 processor(s), type 586.35% memory in use.2000 MBytes physical memory.1281 MBytes physical memory free.3896 MBytes paging file.3292 MBytes paging file free.2048 MBytes user address space.1893 MBytes user address space free.Read from location 04480031 caused an access violation.
    Context:EDI:    0x04480025  ESI: 0x0603df98  EAX:   0x00000000EBX:    0x00000000  ECX: 0x04480025  EDX:   0x0544000fEIP:    0x004e6535  EBP: 0x0661f614  SegCs: 0x0000001bEFlags: 0x00010246  ESP: 0x0661f60c  SegSs: 0x00000023
    Bytes at CS:EIP:8b 79 0c 8a 51 04 50 57 50 88 55 08 e8 ca fe ff 
    Any suggestions?
    Can I try installing DTM 6.0, even if the OS on my device is 5.0.0.602?
    Solved!
    Go to Solution.

    You're lucky.  I had DM 5.0.1 and upgraded to DM 6.  It didn't work so I did the clean uninstall multiple times and tried reinstalling both DM 6 and DM 5 (different times) and now neither works for me.

  • Mac Blackberry Desktop Manager Won't sync with New Bold 9650

    I have a new Bold 9650 (upgraded from a curve). My curve recognized and would sync with no problems. I used BB Desktop Manager to restore my new bold with all it's contacts and such. When showing up in DM, the options for restore and back up are available. When I click on applications it says I need a newer version of desktop manager. I have downloaded the most recent from the website and it still says this. 
    More importantly, the SYNC option doesn't even come up while the two are connected. It stays greyed out and won't let me get the option to sync. This worked fine with the curve, but the bold won't sync!!! Help please!!!

    I too had the same problem. See below... there's a workaround. Apparently they are working on it.
    BlackBerry Desktop Manager is unable to detect the BlackBerry smartphone when the Mac computer is bo...

  • Desktop manager not connecting with the 9700 bold

    hi,
    I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working)  Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
    Rregards,
    mubashir

    hi,
    I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working)  Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
    Rregards,
    mubashir

  • Desktop Manager Installs but Keeps Crashing

    The title says it all!  I have followed the guidelines and uninstalled, cleaned out the directory, and re-installed...same problem...application crash.
    I am running windows 7 and here is what the app crash lists...
    Description:
      Stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Rim.Desktop.exe
      Application Version:    6.0.0.43
      Application Timestamp:    4c758111
      Fault Module Name:    unknown
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c0000005
      Exception Offset:    12980860
      OS Version:    6.1.7600.2.0.0.768.3
      Locale ID:    1033

    Hi chuckevans and welcome to the BlackBerry Support Community Forums!
    Do you receive any pop-up error messages when BlackBerry Desktop Manager stops working? Was this happening with older versions?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Desktop Manager version 6 - TOTAL CRASH

    I have just bought a new laptop (Sony Vaio running Windows 7 and Microsoft Outlook 2010).
    I am using the Blackberry 8900 Curve with  Vodafone.
    Like everyone else, I could not synchronise my blackberry with Outlook 2010 and was told to wait until August for version 6 of Desktop Manager.
    I just installed it!     But when I tried to launch Desktop Manager is simply says "Blackberry desktop software has stopped working.  Windows is checking for  a solution to the problem" and then I get  "  Blackberry desktop software has stopped working.  A problem caused the program to stop working correctly.    Windows will close the program and notify you if a solution is available".
    I un-installed and reinstalled.  No change.
    Prior to downloading version 6 I had  downloaded and installed version 5 with Service Pack  - the file name was 501_b049_multilanguage.  That  one installed and launched but there was NO WAY to synchronise Blackberry Curve 8900 with Outlook 2010!
    My PC is brand new and "TOTALLY CLEAN" of any special install.  The only application running on this laptop other than Microsoft Windows 7 (32 bit)  and Microsoft Office 2010 (including Outlook 2010) are McAfee (which I disabled to ensure this was not the reason desktop  manager  would not work!) and an HP all in one printer!
    IT HAS BEEN A WHOLE MONTH since Microsoft launched Outlook 2010, not sure what the issue is but both Desktop Manager 5 and Desktop Manager 6 have VERY SERIOUS ISSUES which should have been screened through QA.   HAS ANYONE ELSE EXPERIENCED ALL THESE ISSUES???

    Hi and welcome to the forums!
    In previous versions of desktop manager the unexpected close conditions were usually associated with the lack of administration rights (Vista) or the User Account Control  settings in Windows 7.
    The third leading cause especially with laptops were either using a docking bay or the power management settings  interfering with the USB control.
    As you are using the supported 32 bit Outlook 2010, I suggest that the problem may be due a connectivity issue. We can document this with Kb05143 listed below.
    I would also verify that the version of NET Framework installed on your PC.
    When you removed and re-installed the desktop manager did you use the clean reload procedure?
    I would suggest it if we cannot find the problem through logging.
    Thanks,
    Bifocals
     KB05143  How to turn on BlackBerry Desktop Manager connection logging
    KB11320   How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows
    System requirements: BlackBerry Desktop Software
    Software
    • Microsoft® Windows® XP SP2 or later, Windows Vista™, Windows 7
    • Microsoft® .NET Framework 3.5 SP1 or an active Internet connection
    • iTunes version 7.7.1 or later or Windows Media® Player version 10 or later for music
    synchronization
    Hardware
    • Intel® compatible 1GHz or higher processor
    • 512 MB of RAM
    • USB 1.1 or higher USB port
    • Screen resolution of 1024x768 or greater
    User Guide - BlackBerry Desktop Software
    Update Guide - BlackBerry Device Software
    Release Notes - BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop manager- fatal error when updating OS BOLD 9000

    Hi guys a few days back my girlfriend entered my password wrong and my blackberry wiped itself, I downloaded bbsak and wiped the phone, and wiped it again with JL_Cmder, it says reload software 507, when I go onto application manager and select update it tells me "fatal error has occurred while updating devices software. Please try again", bbsak also wont load the OS it tells me "the application loader wizard requires that the blackberry device manager needs to be installed", but it is installed on my PC, and when I go to C:\Program Files\Common Files\Research In Motion\AppLoader and select loader it gives me the same error as when I try loading the OS from bbsak, I am running windows XP service pack 2 and desktop manager v5.0.1, and I have OS 4.6 and the latest version 5.0  please help guys, thanks, I will appreciate any help possible

    Hey Varushen,
    Welcome to the BlackBerry Support Community Forums.
    I would suggest try to reload the software by going to www.blackberry.com/update 
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Desktop Manager 4.7 crash

    Frequently after any synchronization I get an Application Error which causes Desktop Manager 4.7 to crash.  The error is a standard Windows access protection error: 
    DesktopMgr.exe - Application Error
    The instruction at "0x38f2f511" referenced memory at "0x38b82004".  The memory could not be "read" . 
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    I am synchronizing a BB 8120 Pearl v.4.3.0.72 (platform 2.6.0.43) with Outlook 2007 on Windows XP SP3.  I sync just the Address Book and Calendar with default settings.  My BB is connected using USB, it is using BIS via Vodafone UK and Wi-Fi is turned on and connected.  This also used to happen with Desktop Manager 4.6 (which is why I upgraded).  I've tried reinstalling the software.  I also "deleted all user settings" when uninstalling the previous version.  
    Anyone know what's going on?  
    Solved!
    Go to Solution.

    Clearly BB tech support either don't read these forums or are next to useless. 
    By process of elimination, it appears that all of my problems with Desktop Manager and BBDevMgrDeviceListener stem from the Toshiba bluetooth driver installed on my Dell laptop.  Without BT enabled in the BIOS (or disabled in Device Manager) all of my desktop software runs fine.  When BT is running, the desktop software fails in strange ways including the random crash and the BBDevMgrDeviceListener process requiring a kill on shutdown. 
    I'm glad I figured out why it was broken but very disappointed that nobody from BB even made an initial response to the thread or attempted even the most basic trouble shooting.  Pretty poor effort really!

  • Updated Desktop Manager 4.7 - 5.0.1 Groupwise 7 problem

    Hi
    I had all sorts of problems getting Groupwise 7 (in caching mode) to work with Blackberry Desktop Manager 4.7 and a Blackberry Bold.When I try to synchronise the Blackberyy with Groupwise I get the error message 'Your computer must be connected to the Internet to perform this operation. Please make sure that you are able to connect to the Internet and try again.' I finally sorted it out when I came across a Regedit hack of:   HKEY_CURRENT_USER\Software\Research In Motion\BlackBerry\Synchronize\0x24a82dfc and changed the STATE from #1 to #0.
    I have now updated Desktop Manager to 5.0.1 and find that despite the registry value still being set to #0, I can't get the software to synchronise Groupwise with my Blackberry. Does anyone have any suggestions?
    Mike

    Has anybody had any luck with this issue??

  • Desktop manager for mac not syncing with calendar

    Desktop manager just started to give me a sync error yesterday when syncing the calendar. I receive no error message for the contacts. I use desktop manager for mac. I have never had this issue before. I updated desktop manager yesterday after the sync error but, that did not correct the problem.
    Any suggestions?
    Solved!
    Go to Solution.

    Thanks for the reply yancy.
    What error message are you receiving?  Are you only synchronizing to Ical or Entourage?
    Also have you attempted to forget the device and the re-setup the synchronization?  
    To forget the device, go into Device>Forget Device.  Unplug the BlackBerry, plug it back into the Mac.
    I look forward to your reply.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Hotspot Field on Bold 9900 missing

    Switched devices from a Bold 9900 (which hotspot was available and fucntioning) to another Bold 9900.  Followed instructions as described in the blackberry desktop software, but have spent almost 2 days now updating software etc trying to get device to provide "Hotspot" field in the manage connections area.  The previous bold 9900 worked fine with the "hotspot" used with a laptop.  Have updated the OS to 7.1.0 Bundle 2807 which is the same as the old Bold9900.  The replacement bold originally belonged to a corporation that upgraded to new devices, hence wiped the data before doing the device switch....but believe there are ghost issues as the last time it rebooted the previous BBM contacts showed up.  My question is, are there settings somewhere that I may have missed that needed to be changed?    

    danjo2 wrote:
    Switched devices from a Bold 9900 (which hotspot was available and fucntioning) to another Bold 9900.  Followed instructions as described in the blackberry desktop software, but have spent almost 2 days now updating software etc trying to get device to provide "Hotspot" field in the manage connections area.  The previous bold 9900 worked fine with the "hotspot" used with a laptop.  Have updated the OS to 7.1.0 Bundle 2807 which is the same as the old Bold9900.  The replacement bold originally belonged to a corporation that upgraded to new devices, hence wiped the data before doing the device switch....but believe there are ghost issues as the last time it rebooted the previous BBM contacts showed up.  My question is, are there settings somewhere that I may have missed that needed to be changed?    
    Did you cal your carrier yet? They could possibly be blocking this feature.
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Desktop Manager crashes when opening backup file with critical informatio​n

    I was on a trip and a family member triggered my Bold's secure wipe (wrong password 10 times).  I had made a back-up just before the trip and it contains very critical information.  When I try to do a restore with Desktop Manager (4.7.0.32, same version as used to make the backup), it crashes as soon as I select the backup file.  I tried opening the .ipd backup file from Advanced instead, with the handset disconnected, with the same crash result: "An unhandled win32 exception has occured in DesktopMgr.exe [4340]." where the number in the brackets is different every time.
    Please help me, I will likely lose my job if I cannot restore the information from this backup!
    Edit: I tried reinstalling the Desktop Manager, and same thing.  I even tried 4.6 instead of 4.7 and again, same thing.
    Message Edited by Prune on 12-31-2008 05:03 AM

    Connected to the USB, can you do a Restore > Advanced and select the critical databases?
    Are you connected to the PC via USB to a rear PC USB port--not a USB hub, or front monitor port?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager 5.0.1.37 Crash on Windows 7

    Hi people, I have a 8520 and desktop manager 5.0.1.37 installed on a Windows 7 Ultimate 32 Bits. After the sincronization process is done it crash with the following error.
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    DesktopMgr.exe
      Application Version:    5.0.1.37
      Application Timestamp:    4b982830
      Fault Module Name:    olmapi32.dll
      Fault Module Version:    12.0.6514.5000
      Fault Module Timestamp:    4a89d653
      Exception Code:    c0000005
      Exception Offset:    0004c076
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Faulting application name: DesktopMgr.exe, version: 5.0.1.37, time stamp: 0x4b982830
    Faulting module name: olmapi32.dll, version: 12.0.6514.5000, time stamp: 0x4a89d653
    Exception code: 0xc0000005
    Fault offset: 0x0004c076
    Faulting process id: 0xbcc
    Faulting application start time: 0x01cae15d7511335b
    Faulting application path: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
    Faulting module path: C:\Program Files\Microsoft Office\Office12\olmapi32.dll
    I have reinstalled the application several times, I have installed in other computer with the same version of Windows 7 and I have the same problem.
    Any Ideas???

    Hi and Welcome to the Forums!
    I've searched the public KBs for any hint of the various codes in your error log and haven't found anything as of yet. You may have better luck.
    But, given that, I recommend a complete and clean start over...here's a process:
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported that there are more registry keys to remove than are discussed in that KB
    Others have reported the use of a registry cleansing tool to also be helpful
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • FIXED - Desktop manager crashes when syncing with Notes 8

    Hi - first post, so be kind!
    Have installed desktop manager 5.0.1, and trying to sync with Notes 8 calender. When reading the calender, desktop manager always crashes with the following error:
    AppName: desktopmgr.exe     AppVer: 5.0.1.28     ModName: lnsections.dll
    ModVer: 7.1.1.129     Offset: 001a32ed
    Have looked through forum and not seen a fix that seems obvious to fix this. Any help would be greatful!
    thanks.
    ***** seems I had a corrupted old calendar entry - after archiving all old entries, the sync now works *******

    Connected to the USB, can you do a Restore > Advanced and select the critical databases?
    Are you connected to the PC via USB to a rear PC USB port--not a USB hub, or front monitor port?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager compatible with Blackberry Bold 5.0 OS?

    To make a long story short, the workstation I use for Microsoft Exchange e-mail is running on the Windows 2000 server OS that was provided by the corporate office. 
    Since I currently have Desktop Manager 4.7 running without problems for my Blackberry Bold, I am wondering if it will be compatible with the upcoming Bold 9700 5.0 OS.  I only need my e-mail forwarded to the Blackberry mobile. 

    Hi and Welcome to the Forums!
    Well, in most cases, I usually advise folks to use a version of DTM that is at least as new as their device OS. But in your case, that won't work since Win2k was last supported in DTM 4.7 and is not listed as supported since DTM 5.0. But, it can't hurt too much to try (just make sure you have well saved backups first!!)...what you really want to do is to install DTM and then also install your device OS update package atop DTM so that DTM can be properly modified for your specific device OS level. If it does not work, you can always fall back to 4.7.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • How to schedule webi report in bulk (multiple report in one request)

    hi, I am little bit new to BOXI. I have little bit work experience in Crystal X on scheduling which was used in one of our enterprise java application. We are exploring options in BOXI. Currently i am scheduling a report with following api infoStore.

  • Enabling java to run on windows xp professional

    I just got a new gateway pc & it wont let me play any games (like bingo.com)...I downloaded sdk 4.0, but it still wont let me in. HELP!!!

  • Saving logo for Web

    I am having trouble with saving my logo for web. I went to Save for web but what are the specs to save as PNG? I am using this logo for signature use in an email..but when I print it out it look very pixeleted. The logo size I reduced to 1.5 in X 0.4

  • CHANGEDOCUMENT_READ

    Req: While creating condition records through VK11, if we maintain scale prices as well, the entries that get stored in CDHDR and CDPOS are wrt to new entry only and not reflecting KONM table with scale prices. However, when we change scale prices in

  • Has anyone experienced an unintended "find/replace all" in a document (using FM11) ?

    Hi All, Using FM11 with Windows7. We have a problem with the following: If I have completed a Find/Change All in Document A (then close the Find window), then I open Document B and press Control-F to perform a new search, once I start typing the prev