Desktop Manager not detecting device. Not a local administrator

Hi there,
After a complete re-install of the software, there's no way for my desktop manager to detect my USB connected BB. The thing is that i am starting the Win session as a standard user (i have just enroled a new Windows Domain). If I start with the domain admin account, It recognizes my BB perfectly well.
How can I run my Desktop Manager and Desktop software in a non-Administrator user profile?
Thanks a lot!
Marcos

i am in the exact same position as you. it is irratating and it seems this is a common problem and bb or mac are not addressing a solution. looks like i have to get an iphone

Similar Messages

MXI3 (NI PXI-8330) board not detected. Not powering up, no link light.

MXI3 (NI PXI-8330) board not detected. Not powering up, no link light. Cable looks fine. Any ideas?

PeteMan,
I will need to know in more detail how your system is behaving to give you better tips, so please feel free to send me more information.
For now, let me send you a couple of troubleshooting tips:
Cable connection
Make sure both ends of the copper cable are well connected to the PCI-MXI-3 and the PXI-MXI-3 boards. Be careful when disconnecting the copper connectors. you need to push down the plastic connector so it does not get damaged. Damaged connectors could result in bad MXI-3 links.
If the connector has not been used properly, it could be broken (this rarely happens). Make sure you are not connecting the cable backwards.
Power - Up order.
It seems you are controlling your PXI chassis using a PCI-to-PXI extender (copper cable). Make sure you are powering up the PXI chassis BEFORE powering up the PC.
PXI is built on top of the CompactPCI spec, so it uses the PCI high speed bus. The MXI-3 extender is really a PCI-to-PCI bridge toyour computer, so for your PC, all the slots in the PXI chassis look like more PCI slots. In other words, your computer suddenly has more PCI slots.
It is very important to power up the PXI chassis first before powering up the computer, because at power up the PC enumerates all PCI slots. If the PXI chassis is OFF during boot up, the slots in the PXI chassis will never get enumerated and your PC will never see the board installed in the PXI chassis.
Normal Power up LED sequence
Each MXI-3 board has four LED light on its front panel: two green lights (POWER and LINK) and two orange lights (Tx and Rx). When you power up the PXI chassis you should see one green light and one orange light ON steadily (POWER and ). Then, when you power up the PC, both green lights shoudl be ON steadily and the orange lights shoudl flicker.
If you do not see this behaviour at power up, most probably one of your boards its damage.
If you have another MXI-3 extender kit, try to set up the system mixing the boards from the two kits to try isolate which board is the one that is damaged.
Run the MXI-3 Optimization Software
The MXI-3 Optimizaton Software makes sure that the link between the PC and the PXI chassis has been set up properly. It will show you an error otherwise.
MXI-3 Software Version 1.15 for Windows 95/98/NT/2000/ME
The PC powers up fine if the PXI chassis is OFF, but if I turn on the PXI chassis first and then try to power up my PC, my PC does not boot
There are several things that could be causing this behaviour:
It could be that your PC has an old BIOS that has issues detecting PCI-to-PCI bridges. You could try upgrading the BIOS.
A part of the hardware could be damaged. If you have a main-stream computer (like a DELL or HP PC, for example), test your MXI-3 extender in it to make sure that the hardware is in good conditions. Main-stream computers tend to use new Motherboards with good BIOS.
There are more tips in the following KnowledgeBase:
KB 267FAS5P : MXI-3 Troubleshooting Guide
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

Blackberry Desktop Manager for Mac does not recognize any Calendars for syncing

ive installed the blackberry desktop manager for my Macbook and hooked my phone up through the USB port when I started the program and when I go to the calendar section it says "There are no calendars available on this computer for syncing. Please launch a new iCal and create a new calendar". How do I fix this? I have a lot of information on my iCal that I want transferred over to my phone, but it won't recognize the calendar in the program. Help

I'll try to help...first you did not provide any pertinent information for troubleshooting: Mac OS, device, device OS...
Now before you do anything go to iCal>File>Export and create an iCal archive (JIC). The rest is dependent on the OS (as each store iCal data differently)...It is possible that your calendar file is not where it should be. Try cleaning system and user cache. Restarting your mac and repair permissions.
On the device side, what do you have as the default CICAL? You could try forget device in the DM or trash the user>username>application support>BlackBerryDesktop folder and start over.
Now do you have more than one calendar? In the DM how are you setting the sync? Two Way, All Calendars...to what calendar are you adding on the device? Under Advanced Settings are you selecting All events and are you Replacing all calendar events on the Blackberry device? Remember that even if you have multiple calendars in iCal they will sync as one in the BlackBerry.
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

Desktop manager and Phone will not connect

Why will my phone not connect to my desktop manager? Please help me?

Are you still experiencing this issue? Have you tried using another USB port or USB cable to connect? If so, try uninstalling and reinstalling Blackberry Desktop Manager for Mac. http://bbry.lv/cjrGPM
Once your BlackBerry connects with the Desktop Manager, you may want to do a clean application load to resolve the issues your device is having. http://bbry.lv/aKuQoN
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Desktop manager for mac will not read the memory card

I have a Storm and the desktop manager does everything correctly except it will not recognize the media card for music. It says "please insert a media card in your device." Ive got the 8GB microSD card and it shows up in the phone memory but i cant load any music from my computer.

OK, I spent an hour and a half on the phone with RIM support this morning trying to fix this very thing with SUCCESS!!! Here is what you need to do. Keep in mind that this fix can only be done on a PC and NOT a Mac. Sucks, but its reality. Click on the link below and make sure that the PC your doing this on has the BB desktop manager installed on it. I went to my dads house and used his PC. After the tech and I learned that the DM has to be installed before you start the fix we were able to resolve the problem and the DM on the mac recognizes the media card. I'm also able to see the BB1 and BB2 icons on the desktop now so I can drag and drop if I want. I hope this helps you all. If you need additional help with this please ask. I may not be the most tech savy person here but I may be able to help a little. Here you go:
NOTE: MAKE SURE THAT THE DESKTOP MANAGER IS INSTALLED ON THE PC YOUR USING FIRST. I ONLY INSTALLED THE ENGLISH VERSION WITHOUT MEDIA SYNCH (to reduce download size and time) AND IT WORKED GREAT.
http://www.blackberry.com/btsc/documentLink.do?externalID=KB19717
Follow the directions to the tee and it should work fine.
PS: If you have problems with your blackberry and you cant find the fix here or on CB call your carrier tech support. If they cant resolve they are pretty quick at getting RIM on the case and resolving without you getting charged for it. Verizon was helpful at that and when I spoke with BB tech support they were extremely helpful. I was very impressed.
I hope this helps all of you with this problem. Good luck out there!!!!

Adobe Digital Editions not detecting device

My Adobe Digital Editions is not detecting my NOOK tablet. Please help

Unlike dedicated eReaders, most tablets are not recognized by ADE.
You need to install and Adobe DRM compatible app such as Blufire on the tablet,
and copy files using a file manager.
~~~
Another possibility is a bug in ADE2.0, which is strippy with some devices.
There are lots of bugs in ADE2.0. Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Windows 7 Desktop Manager 6.0 will not sync calendar with Outlook

I just loaded Windows 7 and now I can't get Desktop Manager to recognize Outlook Calendar. It shows (not installed) next to the Calendar on the sync window.
I have uninstalled Desktop software and reloaded and same issue. I am using a Bold 9700 if this matters.
Please help

Hello Shawzy and welcome to the BlackBerry Support Community Forums.
Have a look at KB23978 which should correct the issue you are experiencing with your Calendar.
Let me know how you make out.
Thanks! And have a great day
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Software update via desktop manager failed, phone will not boot

I used the Desktop Software (I had to update this first to version 6.00.43; anyway, that's what the Rim.Desktop.exe file properties in Windows Explorer says it is) to update my Curve 8900 's software. It went through the first two steps of downloading and installing; then just sat there stuck on the reboot step -- no kind of error message, just stuck, with phone displaying the AT&T sign on screen for probably a good chunk of lat night (started doing this a little before bed) and all through the day today. Only removing the battery will shut off the phone; once restarted, the white progress bar fills up over a number of minutes and goes back to the AT& screen again; hangup button will not shut the phone down. If I reconnect the USB and the Desktop Software is still running, status message continues to say "disconnected"; if I first connect the USB and then start the software, get a "connecting..." status message but it never connects. Windows 7 "Safely Remove Hardware" list does not display it.
Any way to fix this?
Bard55

Close Desktop Manager.
Then do this:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Then follow the instructions exactly in the first post of this thread to install the OS listed there.:
http://www.blackberryforums.com/general-8900-series-discussion-javelin/227412-os-8900-v5-0-0-1168-5-...
Once you have that done, then you can use Desktop manager to restore the backup file that the original update should have made.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Could not detect device

tried to set up new devices - mouse and keyboard
but the setup could not detect them.
please advice.

I successfully set up the Apple wireless keyboard and mouse on my PowerMac G5 (using an adapter) but my G4 PowerBook (built-in BT) could not pair either of them. The PowerBook did link up with the G5, but not the devices. Any suggestions from anyone? Thanks.

USB Port not detecting device

My usb port on the side of the pc both are not detecting any device. How to fix it?

A good place to start troubleshooting is this HP document, Troubleshooting USB Connections (Windows 7).
If you don't have Windows 7 or if you have further problems, please to provide more information when you post again. The more information you provide, the more likely it is that you'll find someone here to help you.
Welcome to the forum,
GeorgeFN
GeorgeFN
I work on behalf of HP.

Desktop manager is installed, but not working

I have installed and uninstalled the software 10 times today. The desktop manager is loading and my computer is "seeing" my smartphone. When the manager opens, none of the icons are active. As such, when I cursor over the "synchronication" icon -- it highlights - -but links to nowhere. I have downloaded the software from the CD that came with my phone AND I have downloaded it 4 times from online.
Desktop manager worked yesterday for my 8830 -- I had to get a new phone and now I can't retrieve any of my contacts!
Help! I am out of ideas!

Hi and welcome to the forums!
Please specify the PC, the OS (if Vista 32 o r64 bit
What version of Outlook are you running .
What version of Desktop manager are you currently running?
Thanks,
Bifocals
Please us the clean removal procedure to save a lot of headaches down the line.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Initial sync between Desktop Manager and 8320 does not recognize internet connection

Am unable to do an initial sync between Desktop Manager and BB Curve 8320. Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again. Tried with version 4.3 and 4.6.0.12. I have a broadband connection that is always on and have also tried wirelessly. Any suggestions are appreciated.

Hi,
First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
After you are down download DM 4.5 with NO MEDIA MANAGER from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Just for trouble shooting purpose, turn off firewall and virus checkers,
Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Blackberry desktop manager wont detect blackberry

i have looked everywhere for a solution to my problem and i simply cannot find a fix. my blackberry curve 8520 wont connect to my desktop manager. i have tried everything i could think of however nothing has proven successful.
here is what i have so far done:
-reinstalled desktop manager
-installed latest update for desktop manager
-installed drivers for blackberry
-checked usb cable and ports
-made sure desktop manager was set to usb
-pulled the battery on the blackberry (power cycled)
-restarted my computer
i believe this is everythign i have currently tried, i am running 64x ultimate windows 7 and my computer does recognise that a blackberry is put in as everytime i do so a ballon at the bottom om my screen says a blackberry has been detected and gives it a drive name and such. it is also charging which ensures enough power is being delievered to the blackberry. i do not have another computer to try the desktop manager on. if anyone has a fix to this issue please respond asap as help would be very much appreciated.

Hi and Welcome to the Forums!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Tips for getting BlackBerry Desktop Manager to detect the BlackBerry smartphone!

Here are a few tips that may help if your PC is unable to detect your BlackBerry smartphone!
1.    Install the desktop manager software – when installing the Desktop Manager software that came with your device be sure to Not have the BlackBerry connected to the computer during this process.
2.    Always use the USB ports from the back of the computer; never use a USB hub or a docking station USB port.
3.    If you have another UBS cable you can try doing that to make sure it is not the cable causing the issue.
4.    If you are using a laptop computer disable the power management settings.
    a.    For Windows-XP and Vista do the following to disable power management on the USB ports
        i.   On the computer, right-click My Computer and select Properties.
        ii.    Click the Hardware tab, and then click Device Manager.
        iii.    Expand Universal Serial Bus controllers.
        iv.    Right-click the USB Root Hub and select Properties.
        v.     Click the Power Management tab, and clear the Allow the computer to turn off this device to save power check box.
        vi.    Click OK.
        vii.    Repeat steps i. through vi. for each USB Root Hub listed in BlackBerry Device Manager.
5.    If you have uninstalled and reinstalled the Desktop Manager Software trying using the following knowledge base article to do a “clean uninstall” of the software. http://www.blackberry.com/btsc/KB02206
6.    The existing USB driver installed is for an earlier model of the BlackBerry smartphone.
    a.    Manually upgrade the USB driver for the BlackBerry smartphone by completing the following steps:
        i.     Right-click My Computer and select Properties > Hardware > Device Manager.
        ii.     Under Universal Serial Bus Controllers, verify that the BlackBerry smartphone is found.
        iii.    If an exclamation mark is displayed, right-click the BlackBerry smartphone and select Update Driver.
        iv.    If the Hardware Update Wizard prompts you to use Windows Update, select No not this time and click Next.
        v.     Choose Install from a list or specific location and click Next.
        vi.    Choose Don't search. I will choose the driver to install and click Next.
        vii.    Click Have Disk and then choose Browse.
        viii.   Browse to C:\Program Files\Common Files\Research In Motion\USB Drivers.
        ix.    Double-click on RimUsbNT.inf, click OK, and then click Next.
7.    If you have another PC try using that PC to see if you able to get the device connected
8.    If you do not have another PC then try creating a new user account on the PC and then install the Desktop Manager software on that new profile.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

There is also some great info in the below thread
http://supportforums.blackberry.com/t5/BlackBerry- Desktop-Software/Desktop-Manager-quot-disconnected -quot-and-I-can-t-get-rid-of/m-p/506238/highlight/ false#M16105
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Plugged in, but not detected and not charging

recently i sent my laptop for repair, but after 1 month, the same problem occured. I plugged the charger in, but it is not detected. it even won't charge the battery. sometimes it happens, but sometimes it can be detected the charger. Usually it does not detect.. what should i do? what may be the problem?

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
You may want to try below different methods and check which one work for you.
Method A:
Remove the AC and Battery from the laptop
Press and hold the power button for 30 to 40 seconds
Replace the battery and AC
Boot the laptop up and check if the same message is still displaying
If same error still persist, try to uninstall Lenovo Energy Management, reboot then install the Energy Management software again.
Method B:
1.Open Lenovo Energy Management
2.Click on the bottom gear icon between i and ?.
3.Under Battery Health, Click on Start for Battery Gauge Reset. (refer to Fig. 1 below)
4.That should refresh the gauge and let the system finish through the cycle.
Method C:
1.Open Lenovo Energy Management
2.Click on the bottom gear icon between i and ?.
3.Under Battery Health, choose "Optimize For Battery Runtime" instead of "Optimize for Battery Lifespan".
Note: The latter option will extend the lifespan of battery by limiting the charging capacity to be between 0-80%.
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Z570-Battery-plugged-in-but-not-charging-...
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Desktop Manager not detecting device. Not a local administrator

Similar Messages

Maybe you are looking for