Desktop Manager not recognize my Sprint Bold 9650

I put these Issues I'm having on You Tube -
http://www.youtube.com/watch?v=lcSwbk7sxFE
or you can seach youtube for -
Sprint Blackberry Bold 9650 Desktop Manager Issues
The software does not recognize my phone at all - never has - new install on 7/13/2001
This is my first install of Desktop manager software (no older version where installed)
I have changed the power setting on my Laptop USB ports
Phone version is 6.0 bundle 2647
Desktop Manger version is 6.1.0.35
Thanks for your help -
Solved!
Go to Solution.

Hi and Welcome to the Forums!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Yahoo mail not going to my bold 9650

    yahoo mail not going to my bold 9650
    2 days in a row i was on the phone with verizon. my mail is intermitly being sent to my phone. anybody else having that problem?

    First try this solution:
    Re-validate the integrated account. To do this, complete the following steps:
    Log in to the BlackBerry Internet Service account.
    Beside the invalid integrated email account, an icon of an envelope with a red line through it will be displayed. Click the icon.
    If you are still having the issue then you would go thru steps of :
    (Associating an email account using the BlackBerry smartphone)
    The steps are located at this web address http://www.blackberry.com/btsc/dynamickc.do?externalId=KB02189&sliceId=SAL_Public&command=show&forward=nonthreadedKC&kcId=KB02189#smartphone
    Hope this Helps

  • My new mac desktop will not recognize samsung yp-t9j

    my new mac desktop will not recognize samsung yp-t9j
    what do i do?

    Reset the SMC and the PRAM on the iMac and retest.

  • Desktop Manager 4.7 for BB Bold - Roxio does not recognize SD Media

    I am using the latest (V4.7) Desktop Manager but Roxio will not recognise the SD Media Card inserted in the phone.
    I have tried (2) different Micro SD cards both with data on them.
    The phone acknowledges both cards and I can access files through phone.
    Have I overlooked an option in Roxio?
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    Please tell us what type of PC OS you are running on. (Windows 2000, XP, Vista)
    See if you can access the media card without using desktop manager.
    Attach the USB to the BB and the PC. Don't use desktop manager.
    Go to "My Computer" on the PC and the BB will show as a flash drive.
    Then you can "drag and drop" files to the BB.
    Use the following settings in the memory option of the Bold:
    Media card support ON
    Encryption mode NONE
    Media transfer protocol ON (Storm and Bold only)
    Mass storage support ON
    Auto enable Mass storage support when connected ON
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop manager not connecting with the 9700 bold

    hi,
    I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working)  Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
    Rregards,
    mubashir

    hi,
    I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working)  Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
    Rregards,
    mubashir

  • PC WILL NOT RECOGNIZE THE bb bOLD 9900

    i bought a new computer with Windows 8 OS. I downloaded the BB desktop manager to be able to sync the PC with the BB Bold 9900. It gives me an error 1723 with the following message. "DLL required could not be run. Action: Repair rim Usb Driver. NT.07D232B6_7904_4970_8B22_8FA..."
    The Microsoft community suggested I unregister and re register Windows installer. I did that but still when I connect the phone to the PX via the USB it is not recognized. 
    I contacted HP support and after 30 minutes  of questions the guy suggested I contact BB support. I don't see a direct link to BB support only this link. Can anyone help?

    diezdeonate wrote:
    OK. Thanks, but how do I repair the rim us drive?
    Are you on Win8 or Win8.1, as the other poster who reported an identical issue? In either case, I don't find any useful KBs on the matter...you might have better luck searching:
    http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
    But, if you are on Win8.1, then I'm starting to suspect a compatibility issue...AFAIK, the Desktop Software is compatible up to Win8, but perhaps not with Win8.1. Refer:
    http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager won recognize my BB 8130 PIN

    Hello, i bought a BB off my friend and am going to switch it over to my own plan but when i connect my BB to Desktop Manager it wont Recognize the PIN or the BB. what can i do and were can i go to check if the PIN and any other code/ expires or if there still is warranty on it?

    Hello smokysmoke,
    Welcome to the BlackBerry Support Community Forums
    The first place to start is determining whether or not it is an issue with the device or the system you are connecting it to. You may want to test it on another system with Desktop Manager installed. If it fails to detect you may want to speak with you friend to find out what kind of coverage he had when he purchased the device.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Comp/ Desktop Manager not recognizing plugged device

    I recently installed/ updated the BB Desktop Software and when I plug in my BB Curve 8520, my comp doesn't recognize the device.
    Note 1: I've installed all updates on my computer AND the new OS on my phone already.
    Note 2: My phone recognizes that it's plugged into the computer because begins to charge.

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager not recognizin​g Storm

    I have done a thorough search but have not found a solution.
    When I connect my Storm, the computer recognizes it.  It shows up in the device manager.  I have checked the drivers - they are up to date.  Everything with the computer is working fine.
    When I open DM  ( I am running v 5.0) - "Device Connected (PIN) - None" is displayed.
    I have uninstalled and reinstalled both v 4.7 and 5.0 with no luck.   I have done a hard reboot of the Storm - no luck.  
    If anyone has any suggestions, your help is greatly appreciated.  

    Hi and Welcome to the Forums!
    Try these articles -- they have many things to try:
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    Let us know how it goes!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager not detecting device. Not a local administrator

    Hi there,
    After a complete re-install of the software, there's no way for my desktop manager to detect my USB connected BB. The thing is that i am starting the Win session as a standard user (i have just enroled a new Windows Domain). If I start with the domain admin account, It recognizes my BB perfectly well.
    How can I run my Desktop Manager and Desktop software in a non-Administrator user profile?
    Thanks a lot!
    Marcos

    i am in the exact same position as you.  it is irratating and it seems this is a common problem and bb or mac are not addressing a solution.  looks like i have to get an iphone

  • Desktop does not recognize 8310 after update to 6.0.1

    The BlackBerry desktop software does not recognize my 8310 after updating to 6.0.1. I am running Vista 64bit, SP2. When I go into the device manager it shows a yellow triangle and says I need to update my driver. Do I need to go back to an earlier version of desktop?

    To manually install the driver:
    On the computer, right-click My Computer and click Properties.
    Click the Hardware tab, and then click Device Manager.
    Expand the BlackBerry category and verify that BlackBerry Smartphone is listed.
    If an exclamation mark is displayed, right-click the smartphone and click Update Driver.
    If the Hardware Update Wizard prompts you to use Windows Update, select No not this time and click Next.
    Select the Install from a list or specific location option and click Next.
    Select the Don't search. I will choose the driver to install option and click Next.
    Click Have Disk and then select Browse.
    For 32-bit Windows browse to C:\Program Files\Common Files\Research In Motion\USB Drivers. For 64-bit Windows browse to C:\Program Files (x86)\Common Files\Research In Motion\USB Drivers.
    Double-click on RimUsbNT.inf, click OK, and then click Next.

  • Blackberry Desktop Manager Not Working

    I have Bold 9780, Win 7 Enterprise SP 1 and tried installing desktop manager for PC.
    I am not able to open the application. It just displayes a blank window.
    Tried rebooting. uninstall and install and same result in all cases.

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, there are some tricks to try, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Desktop Manager Not Working

    My desktop manager (DM) version 4.2 on my PC Vista is not working right.  I can open it and connect to my Sprint
    8703e, but that is very little that I can do with my DM such as opening help.  The backup and restore option along with other options are no longer available in my DM.  What happened to these options?
    Thanks
    Solved!
    Go to Solution.

    Thanks, John!  I updated my DM 4.2 to 4.3, but unfortunately when I did that, my OS 4.2.1.110 was automatically uninstalled so I had to install OS: 4.2.1.119.  Wow! there is a big difference between DM 4.2 and 4.3.  DM 4.3 showed updates so I clicked on that and found that there are other DM 4.4, 4.5, 4.6, and 4.7.  I assume that they are for other Blackberry devices.  John, can you explain what are the other versions for?  I am sure that others would like to know.  While I am happy with DM 4.3, but I am curious to what will happen if I download the later versions for my Sprint 8703e?
    Yes, you answered my question in the other forum, but I am asking again in this forum to give you credit and users of this forum may not use the other forum.
    Again, thanks a lot.

  • Desktop Manager Not recognizin​g Outlook 4.6

    Hi.  I recently purchased a Verizon Curve 8330 and installed the Desktop manager 4.6.  My laptop uses Windows XP and Office 2000.  I can't get the manager to recognize outlook.  Fixes I've tried so far:
    Uninstalling 4.6 and installing 4.5--then 4.3--then 4.2 sp2--then 4.2 sp1 (threatened to destabilize windows, so I aborted the install).
          (each new install was preceded by an uninstall of prior version)
    With 4.3 and above, my 8330 was recognized, but no Outlook.
    With 4.2 sp2 it wouldn't recognize my 8330.
    I managed a work-around to get my outlook calendar/contacts from my palm by changing conduits to my Palm Desktop and then syncing with 4.3.
    I've reviewed the thread on Desktop Mgr 4.5 not recognizing Outlook 2000, and if I'm missing something please tell me.
    Any thoughts on how to get Outlook 2000 to sync with my 8330?

    Hi and welcome to the forums!
    DM 4.6 will service Outlook 2000,
    Use this procedure to   erase the prior install and clean the registry:
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB11320&sliceId=SAL_Pub​...
    Reload 4.6 and  go through al the setup options.
    Let me know if it doesn't recognize Outlook 2000.
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Desktop Manager not working with Windows 7 - Error message received Not Responding

    Hello
    The issue of not connecting with desktop manager started in May 2012. When I plug phone into computer I can see files. USB works fine as I am also able to use all ports with other usb items. I downloaded the latest download manager again today January 14, 2013 and again the desktop manager says non responsive and program will not start. I have windows 7 and the desktop manager did work in April 2012 with this computer (windows 7). Help with a solution would be great.

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Read PDF/XLS to iDOC

    Hi it's possible read pdf and xls file and move the data to a iDOC? Regards Juliá

  • How do you scroll? Or crop a pic?

    How do you scroll on a page? Say as if the page continues after you get to the bottom of the iPad screen. Also, how do you crop a pic. Every time I try to drag to crop it just enlarges the pic.

  • Adobe is not responding. This occurs always and if I try to closed a PDF it will not closed for a long time.

    I open a PDF and when I want to closed it, it does not close until I closed various times. This happens: Adobe is not responding. And then this statement " The Organizer database is damaged and will be reset the next time Acrobat is launched. Quit th

  • Installation CS 5.5, Exit 15 Code

    Good day All, I am on my 6th attempt at an install and I receive the same Exit 15 code.  I've done the following: 0) I'm installing this on an HP Probook 6440b laptop running, 32-bit Windows 7 OS; 1) Uninstalled all Adobe products from the system; 2)

  • Need help getting files names from directory

    I have never done anything in php before and I'm struggling. In an attempt to search through potential document names in a directory, I've added the following code to a new php document: <?php if ($handle = opendir('.')) {     while (false !== ($file