Desktop Manager Updated to ver. 5.0 - why is Device Manager tray icon "exit" greyed out?

Just updated to Desktop Manager 5.0
Blackberry Device Manager 4.7.1.11
BBDevMgr 4.1.0.11
Rim USB Driver 4.1.0.4
Rim USB Serial Driver 2.2.0.3
Before with previous version Device Manager tray icon would go away after disconnecting BB.
Now Device Manager tray icon does not go away after disconnecting BB and when right-clicking on it "exit" is greyed out - what's up with that? Is this by design? Why can't I get rid of the tray icon when disconnected?
JSD

Here's something bizarre. I have also been syncing contacts, calendars and tasks for a long time with my Storm. After downloading the Desktop 7.0 I also saw the Calendar as not available. I don't particularly remember seeing Memo as an option but I also selected it this time around as I was going through the old reload the os, restore, etc. Anyway I did a test adding an appointment to my Outlook calendar then ran the sync for contacts, tasks and memos and amazingly it shows on my Storm's calendar. Not sure how comfortable I am in depending on this but you might try and place an appointment on Outlook's calendar, run the sync and see if it shows up on your cell's calendar. Strange but it is working for me.

Similar Messages

Why is my preview area showing only greyed out boxes instead of photos?

I am unable to import my photos so they can be seen. Whether I try to import them from the hard drive, camera card, or my desktop (following the tutorial), I do not see photographs in the preview area, only greyed out boxes instead of photos. If I imported 6 photos, I have six greyed out (photo-sized) boxes. The specific photos are there somehow, becuase they are properly named when I scroll the mouse over them, but I see only flat grey, no pictures. As I said, this happens even when I follow the tutorial and import from my desktop.

George,
I appreciate you responding to my inquiry. We (that would be the "royal" we, which would be my husband) finally determined that the monitor was not configured properly. "We" discovered this out after uninstalling and reinstalling Lightroom several times.
To answer your question, I was trying to import both photos taken in JPEG, as well as RAW, both were problematic. I could import no images. It was interesting that I could tell all of the data was coming over (when I floated the cursor over a grayed-out box I could read the data), just not the images.
I have a Nikon D5100. I purchased Lightroom 5.0 just before now(two days ago), and was trying to install and play with it. I upgraded to 5.2 as I was going into it for the first time (it is an automatic question). I knew there was obviously a problem when I couldn't see any images. Particularly when I went into the tutorials -- it just reemphasized that something was wrong. Who ever thinks of how their monitor is configured?????
Thank you for following up. I was very frustrated for many, many hours.
Kelly

I can't figure out why my reverb and echo things are greyed out

I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.

bennirubber wrote:
reverb and echo things are greyed out on the bottom right of my screen
http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Iphone 4 ios6 updated now wifi icon is greyed out and cant be turned on?

i own a iphone 4s and recently updated the software to the ios6 update but now i cant connect a wifi connection due to the wifi icon being greyed out and unselectable.. please any info or suggestions would be greatly appreciated

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Release Management Update 4-Errors while loading releases in Release Managment Client Interface.

Hi Team,
We are using Release Management from last 8 months and we upgraded to Release Management Update 4 and using it from last 4 months. Currently we are creating around 50-60 releases daily, but we are facing below issues from last few days with
Releases tab and no issues with other tabs (Administration, Inventory, Configure Paths and Configure Apps)
Release Management Client interface is taking long time when we are opening it.
Throwing error when we are clicking on Releases link in Releases tab.
Throwing error when we are creating new releases.
Please find the error log below:
Timestamp: 3/27/2015 6:49:44 PM
Message: Error thrown while executing the stored procedure ReleaseV2_List with parameters , @FilterXml:<Filter StatusId="0" DateStatusId="1" ApplicationVersionId="0" StageId="0" IsDeferred="0" UserId="9002"
/>, @PartitionId:1.
Timestamp: 3/27/2015 6:49:44 PM
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.: \r\n\r\n   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteXmlReader()
   at Microsoft.TeamFoundation.Release.Sql.OnPrem.OnPremDbAccessor.ExecuteXmlStoredProcedure(String storedProcedureName, Hashtable xmlParameters, String rootElementName, Boolean addRequestorParameter)
Timestamp: 3/27/2015 6:49:44 PM
Message: The wait operation timed out: \r\n\r\n
Timestamp: 3/27/2015 6:49:44 PM
Message: Exception has been thrown by the target of an invocation.: \r\n\r\n   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean&
bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance[T]()
   at Microsoft.VisualStudio.Release.ViewModel.ViewModels.WorkspaceTabViewModel`1.get_DefaultViewModel()
Timestamp: 3/27/2015 6:49:44 PM
Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.TeamFoundation.Release.Data.WebRequest.PlatformHttpClient.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndGetAsyncMemoryStreamFromResponse(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
   at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndDownloadString(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
   at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClient.EndPost(IAsyncResult asyncResult)
   at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.HttpRequestor.<>c__DisplayClass1.<GetPostCaller>b__0(String url, String body)
   at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.BaseReleaseV2ServiceProxy.ListReleases(String filterXml)
   at Microsoft.TeamFoundation.Release.Data.Model.ReleaseV2.LoadListXml(String filterXml)
   at Microsoft.TeamFoundation.Release.Data.Model.ModelFactory.LoadListElements[T](String filterXml)
   at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel.LoadElements(String filterXml)
   at Microsoft.VisualStudio.Release.ViewModel.DataAccess.ElementRepository.LoadElements(String filterXml)
   at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ListWorkspaceViewModel.Initialize()
   at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel..ctor()
Timestamp: 3/27/2015 6:49:44 PM
Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n   at Microsoft.TeamFoundation.Release.Common.Presentation.Binding.OnDatabindingException(Object bindingExpression, Exception exception)
   at System.Windows.Data.Binding.DoFilterException(Object bindExpr, Exception exception)
   at System.Windows.Data.BindingExpression.CallDoFilterException(Exception ex)
   at System.Windows.Data.BindingExpression.ProcessException(Exception ex, Boolean validate)
   at System.Windows.Data.BindingExpression.UpdateSource(Object value)
   at System.Windows.Data.BindingExpressionBase.UpdateValue()
   at System.Windows.Data.BindingExpression.UpdateOverride()
   at System.Windows.Data.BindingExpressionBase.Update()
   at System.Windows.Data.BindingExpressionBase.ProcessDirty()
   at System.Windows.Data.BindingExpressionBase.Dirty()
   at System.Windows.Data.BindingExpressionBase.SetValue(DependencyObject d, DependencyProperty dp, Object value)
   at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
   at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
   at System.Windows.Controls.Primitives.Selector.UpdatePublicSelectionProperties()
   at System.Windows.Controls.Primitives.Selector.SelectionChanger.End()
   at System.Windows.Controls.Primitives.Selector.SetSelectedHelper(Object item, FrameworkElement UI, Boolean selected)
   at System.Windows.Controls.Primitives.Selector.NotifyIsSelectedChanged(FrameworkElement container, Boolean selected, RoutedEventArgs e)
   at System.Windows.Controls.Primitives.Selector.OnSelected(Object sender, RoutedEventArgs e)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   at System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
   at System.Windows.Controls.TabItem.OnSelected(RoutedEventArgs e)
   at System.Windows.Controls.TabItem.OnIsSelectedChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
   at System.Windows.DependencyObject.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
   at System.Windows.FrameworkElement.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
   at System.Windows.DependencyObject.NotifyPropertyChange(DependencyPropertyChangedEventArgs args)
   at System.Windows.DependencyObject.UpdateEffectiveValue(EntryIndex entryIndex, DependencyProperty dp, PropertyMetadata metadata, EffectiveValueEntry oldEntry, EffectiveValueEntry& newEntry, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue,
OperationType operationType)
   at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
   at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
   at System.Windows.Controls.TabItem.OnPreviewGotKeyboardFocus(KeyboardFocusChangedEventArgs e)
   at System.Windows.UIElement.OnPreviewGotKeyboardFocusThunk(Object sender, KeyboardFocusChangedEventArgs e)
   at System.Windows.Input.KeyboardFocusChangedEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
   at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
   at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
   at System.Windows.Input.KeyboardDevice.TryChangeFocus(DependencyObject newFocus, IKeyboardInputProvider keyboardInputProvider, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
   at System.Windows.Input.KeyboardDevice.Focus(DependencyObject focus, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
   at System.Windows.Input.KeyboardDevice.Focus(IInputElement element)
   at System.Windows.UIElement.Focus()
   at System.Windows.Controls.TabItem.SetFocus()
   at System.Windows.Controls.TabItem.OnMouseLeftButtonDown(MouseButtonEventArgs e)
   at System.Windows.UIElement.OnMouseLeftButtonDownThunk(Object sender, MouseButtonEventArgs e)
   at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
   at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
   at System.Windows.UIElement.OnMouseDownThunk(Object sender, MouseButtonEventArgs e)
   at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
   at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
   at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
   at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
Please help us.
Thanks & Regards,
Ramakrushna Parupalli

Hi Ramakrushna,
For the situation, you can connect to the database of Release Management, and check whether you can execute stored procedure ReleaseV2_List manually.
You can also try to clean some of releases records if possible to check if the timeout issue can be resolved. Or you can set the timeout configuration of Release Management to a larger value. Refer to this
thread for more information.
Another option is check event logs to see if there any useful informaiton, and repair Release Management on your server machine if possible. If the problem still exist after taking the methods I mentioned above, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have just updated my iPhone 4 with latest IOS 7 and now wi fi greyed out and Bluetooth not working. Tried reset, restore everything - no use. Its out of warranty too. I refuse to pay for a new phone when clearly this is an apple issue not phone issue.

Can anyone help? I updated my iPhone 4 with latest iOS 7 and now wi fi is greyed out, Bluetooth won't work and tbh am so angry! Phone now out of warranty so apple won't help without it costing me. Don't want to pay as its an apple problem not phone problem. It worked ok before. Tried everything, even clearing it down. Can't even back it up now unless I connect to a pc!

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

Why is the Compare Document Feature is greyed out?

Hello Everyone,
I am trying to compare two very similar large documents. I want to use the compare document feature but it is greyed out. What would cause this to happen?
Thanks
Derek L.

Here's what happened and worked for me. My solution, observations and recomendations. I have FCPX 10.0.9
After creating a 2 minute plus video feature , I discovered I could not export (share) the project. The share option was greyed out. Also greyed out was the File> 'Reimport from camera / Archive' option some have suggested as a solution. There were no errors or any indication why this was happening, which is a huge problem with this editing software and I will address that below.
My problem was isolated to exporting (sharing) one timeline (project) so, reinstalling the entire program was not a logical option. This is what I had to do...
I was faced with the prospect of chasing my tail for weeks on end hoping that I could find an answer buried deep within the FCPX manual or online but, what I did instead was, the grueling task of creating a new project and copying clip by clip from the non-share project and pasting each clip into the new project until I found which clip or clips were the problem. Each time I pasted into the new project I would look to see if the 'share' menu was greyed out.
By doing so, I did indeed isolate the bad (?) clip in the new project and what I did in the 'non-share' project was simply reimport that one video clip. Like magic the non-share project was able to export (share). Share menu no longer greyed out.
This taught me a valuable lesson. 1.) FCPX does NOT always give you the ability to isolate a clip it, for whatever reason, does not like. Meaning, you're up the creek without a paddle when export / share time comes. Huge, huge problem that needs to be addressed.
2.) My humble recommendation is to ALWAYS check your 'Share' menu as often as you can tolerate. Specially those of you producing long projects. It's a pain but, if there is just one clip FCPX doesn't like you will NOT be able to export project.

Why is my "Open in Adobe Audition" greyed out in PP cs6?

I have the cs6 master collection, pc, with all the updates yet my "Open in Adobe Audition" greyed out in PP cs6?
I cant dynamic link from PP cs6 to audition cs6. Encore & AFX dynamic links work. Audition opens fine on its own & works fine.

For those of you visiting this page because you're having this problem, what's happened is that Adobe, in it's infinite wisdom, has installed a second folder of program files when updating from 6.0 to 7.0 (or perhaps a smaller update). You need to eliminate duplicate folders so Premiere Pro understands where to look. I noticed that my Audition was all by itself in a second Adobe folder, so I moved its contents to the other Adobe folder with the rest of the program's files and made sure they sat squarely in the Audition folder where they once were. I then right clicked on one of the .sesx files and opened it with Audition and viola. I can edit Premiere audio in Audition again.
PS Adobe, I literally use this ONLY because the denoiser in Premiere Pro doesn't work for the first 2 seconds you play a clip. It takes away noise nicely, just never for the first two seconds after I hit the play button, as if it's trying to use that time to figure out what to remove. If it worked correctly, I wouldn't hear the noise go away in my videos after the first two seconds of a clip and I wouldn't have to export to Audition and waste hard-drive space and time.

Why is ask to share someone screen greyed out when on yosemite, sometimes it is greyed out, other times it's not

can someone tell me when I try to screen share and ask if she will let me see her screen, the option to ask to screen share is greyed out. The weird thing, is, is sometimes, it's greyed out, and sometimes it's black. Can not figure out why that would be. Tried same thing with my Bro and the option was not greyed out.
Is there a glitch or what when its inconsistent about the option to ask to share their screen.

The quick answer is that certain Back to My Mac features are not working well in Yosemite.
Read some of the following to determine if there is anything you can do about it, otherwise we will just have to wait for Apple to fix it:
Setting up and using Back to My Mac with an AirPort base station or Time Capsule
OS X Yosemite: Share your screen using Back to My Mac
If you have issues using Back to My Mac - Apple Support

Why is select calendar and address book greyed out? Why can we not select these options?

Why can we not select address books or calendars? Why is this option greyed out in ITunes 12?

You have to make the selection active.
Go to Select>all, then Select>modify>border.
Another way is to use a stroke:
Open your picture file
Go to Select>all
Open a blank layer above this
Go to Edit>stroke(outline) selection. In the dialog, enter the width of the stroke, choose color, place it inside, ok it.
If you don't like the border, delete the layer with the stroke, and adjust to suit, then do it over starting with step #3

Why are my iPod's contents all greyed out when viewed from iTunes?

I have a 5th gen iPod nano, with software version 1.0.2
I have sync'd the iPod with the content I have in iTunes. Now when I try to look at any of the content on the iPod via iTunes (by connecting the docking cable, and clicking on the iPod under "DEVICES"), everything is greyed out. I can't play any of the music or modify any of the information, like volume adjustment or equalizer presets.
Does anyone know why this happens and how I can fix it? I already tried restoring the iPod and re-syncing everything. It worked for awhile and then the same thing happened.

Click here and follow the instructions.
(50450)

HT204291 Since updating to OS X 10.9.5 my air display has been greyed out in display settings and is no longer recognised

Since updating to OS X 10.9.5 air display has been greyed out in display options and is no longer available. Worked perfectly prior to update

Since posting this question i have solved the problem...
Open network preferences/advanced/TC/IP tab
Set Configure IPv6 to Automatically and apply network then sees Apple TV in display settings.and icon appears.

I just updated my iphone 4sto 6.0.1 and now my wifi is greyed out

I just updated my iphone 4sto 6.0.1 and now my wifi is greyed out

http://support.apple.com/kb/TS1559

Why are so many of my songs greyed out in iTunes Match

Paid for iTunes Match with almost 1400 songs in library. Only 815 were "matched" even though other songs from same album were greyed out and can't be played. WHY?????????

Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

Why is the "Write" (new message) button greyed out? I can't write any new emails.

Having trouble generating any new emails; The Write button in the toolbar is greyed out. Does anybody know why?

Try to reset default.
Right click on the Write button and select 'Customise'
click on 'Restore default set' button.
click on 'Done to close window.
Please check to see if any addons are conflicting by restarting in Safe Mode.
Help > Restart with addons disabled.
If it works in TB Safe Mode then maybe an addon is causing a conflict.
You would have to enable all addons - restart as normal and then gradually disable each in turn to see which one is the problem.
Please post image of the top section showing all the toolbars and their buttons.

Desktop Manager Updated to ver. 5.0 - why is Device Manager tray icon "exit" greyed out?

Similar Messages

Maybe you are looking for