Desktop PC with Airport Express connected to another router

Hi, I'm new to the wireless world. I have an exsisting wired network with wired connections. The router is a Belkin which also does wireless. I have another desktop computer which I cannot get wires run to so easily. My idea is to use my Airport express's ethernet port for this desktop and wirelessly connect the Airport express to the main router for internet services. Is this possible?
Thanks
Steve

Configure the Express as a bridge: join the wireless network, and set "connection sharing" to "off (bridge mode)". Under the Wireless tab, see if there's a box labeled "allow Ethernet clients".
If there is, check the box.
The "n" model Expresses that are capable of this were first sold in March, 2008. Earlier "b/g" only ones may be capable of this too; I just never had one so that's the reason for the qualifier.

Similar Messages

Ipad connects with Airport Express, but not wireless router

I have a airport express that exends my network and is connected by an ethernet cable to the wireless router. they are on opposite sides of the house from each other. every other device i own has full bars wifi anywhere in the house. but the ipad only seems to find the signal from the AE.
If i go in the bedroom with the wireless router, the signal drops to 1 bar. if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it. i have tried reset, hard reset, renew lease forgetting network, and all fails. any ideas?
I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

Problem with Airport Express & D-Link 615 Router

Hi there, this is my first post on the Community but as I am buying more Apple products I decided to sign up.
I have a D-Link 615 wireless router which would not broadcast far enough to the other side of my house (open plan) so I ran a cat 5 cable and connected up my Apple Express to give wireless to this area. This has worked very well up until a few days ago when I upgraded the firmware to V.7.6.4 on the AE. Since then I have lost the wireless from the A.E. and despite resetting and reconfiguring it I cannot seem to get it to work as it was.
The A.E. Utility is telling me that it cannot find the wireless network once it has updated, but doesn't seem to have a problem recognising the network name when I am initially configuring the unit. I have tried just about everything I can think of but to no avail, even plugging the A.E. into the router via another port and Ethernet cable but still with the same results. I thought that it (might) be a security issue so turned of the D-Link wireless security but still no result.
The strange thing is that it WILL 'create a new network' without any problem and broadcast at full strength!
Anyone have any ideas???
Many thanks

Hi Joe,
You got the short answer from
b Henry B,
which will save you lots of aggravation.
But if you're as curious, as I was, here's some more info I came across. I thought naively that a simple wireless 'repeater' would be straightforward and would work across different vendors of wireless basestations.
Maybe it would? But the Airport Express implements something called a
b Wireless Distribution System
b (WDS),
which sounds to me more complicated than just a simple wireless repeater. Maybe it has something to do with also honouring the encryption in the wireless signal to be repeated, err extended? Apparently WDS implementations are not standardized and currently
b rarely
work across different brands of wireless basestations.
Although apparently several folks have been successful extending the range of
b linksys
brand wireless basestations using an Airport Express,
b IF
they first update (swap out?) the linksys firmware with another (open source) version. Whew!
Anyhooow, for your situation, a brute-force option might be to replace the Ethernet cord between the Rogers cable modem and the D-LINK with a longer cable, so you can move the D-LINK closer to Living Room. (Or possibly get a longer CATV cable and move both the cable modem and D-LINK). You could even try increasing the range of the PowerBook with one of those Quickertek antennas.
But I expect it would be
b cheaper and easier,
if it came to that, to just replace the D-LINK with a 2nd Airport Express, which would then inter-work with the Airport Express in the Living room, using
b WDS.
best of luck,
...ben

Problem with airport express connected to a lan with proxy

*in my university exist a lan network with proxy config and port.*
*i searched in the config mode but nothing guide me.*
*If someone know how connect it please answer this topic*
Jf

I think I have it on the right setting - what do I select in the settings?!
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.
It said it was going to take an hour to transfer a 250meg file, so thats definitely still going over wifi.
It still going over wireless is correct. Remember your Mac Pros are connecting to the network over a wireless connection. So, for example, when you send a file from one Mac Pro to the QNAP, that file must first travel to the AEBSn (by wireless), then to the AXn (by wireless), before it makes it to the QNAP by wire.
The other option, which theoretically, should improve the data transfer rate, would be to configure both base stations into an extended network. In this type of network, the AXn would be an extension of the AEBSn's wireless network and its Ethernet port would still be enabled for the Ethernet switch.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

Time Capsule with (2) AirPort Express connection problem

I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

Comcast Internet connection no longer works with Airport Express

This is a little bit out of my depth, so I'm hoping that someone can help me.
I've been accessing Comcast High Speed Internet through my Airport Express connection for more than a year. Things were great until last week when my connection stopped working. The only way I'm able to access the internet is by connecting my iBook directly to the modem.
I tried resetting my Airport Express. I even did it manually so I could manually enter the DNS Servers and Domain Name. That worked for about two days, but now I'm back to where I need to connect directly to the modem.
Maybe there's something I'm not doing correctly. I'd appreciate any help I could get.

gerasco, welcome to the discussions,
It sounds like you are doing everything right and the AirPort Express may be acting up.
Normally, you would reset this device by plugging it in and holding in the reset button until the amber light flashes rapidly.
This time, try a hard reset as follows:
Unplug the AirPort Express
Hold in the reset button and CONTINUE to hold it in as you plug in back in to power
Release the reset button after approx 10 seconds.
Setup the Express again and see if that helps. If you continue to experience problems with the Express, it is likely that it will need to be replaced or repaired.
Please post back on your progress.

Can I create a home network withous dsl connection with airport express

can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

How make wireless connection with airport express to Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly dont have as much knowledge as Jaybee and if hes had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about disabling the Airport Express resp. Extreme routers scares me rigid
I have looked at About this Mac and got the following for you hope its helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem Ill be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200)
D-Link DSL-300T
Zoom Hayes ADSL Ethernet (H0-15805) (081580572)
Any help is very gratefully received.
Regards,
... LIZ ...

IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

anyone knows a reason for the item above?

Airport express connect with Imac via lan line or can not?

I using IMac with connect to internet with DSL modem router (having 4 lan ports).
Now I put Airport express connect with one of Lan ports from DSL router and still connect my IMac with DSL router via lan line and still connect to internet via lan line (switch off airport function in Imac).
The Airport express is using for provide wireless internet and printer to my other PC.
My Question is can I still set up as above and connect share file to my PC via airport express?
Forget to tell that I'm very newby to mac.

chounws, Welcome to the discussion area!
Yes you can do that. Configure the AirPort Express (AX) to operate in bridge mode (not sharing a single IP address).

Desktop PC with Airport Express connected to another router

Similar Messages

Maybe you are looking for