Desktop Services Template - MS Access 2013

Hello,
I am quite new MS Access 2013. I want to use a template as a starting point for a database I am creating. I have chosen the following template to start with.
http://office.microsoft.com/en-ca/templates/desktop-services-template-TC102489834.aspx
My issue is that I cannot seem to be able to modify the database as expected. For instance, I cannot seem to open tables in design view and when I add fields into the tables, I cannot seem to figure out how to designate foreign keys or change primary keys.
Also, on the table icons I see a little globe symbol which in the past versions I have used indicated a linked table.....I am not quite sure what to think of that. What am I missing?
Thanks!

Hi，
When we download Desktop Services Template, it is in web services format and cannot be readily edited.
We need to do following steps to convert Desktop Services Template
into a desktop database：
1. Create a new empty client ACCDB file.
2. Save Desktop Services Template in client.
3. Import Desktop Services Template to the new empty client ACCDB file.
For more detail information, please refer to the following link:
http://vb123.blogspot.in/2012/07/desktop-services-template.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support

Similar Messages

  • Problem running Access 2013 on a Remote Desktop

    Folks:
    We have Office 2013 Pro installed on a Windows 2008 R2 server running Remote Desktop Services.  Multiple people log into the server through Citrix XenApp and use the Office applications without problem.  Every few weeks (and sometimes few days),
    the Access 2013 gets funky -- buttons disappear, tables and queries don't show up in the navigation bar after they are created.  Has anyone else seen this and is there a solution to this problem?  Please advise.
    Thanks,
    DDD
    Debbie Data Architect

    Does this only happen when you access via a remote desktop connection? what if you access it locally?
    Probably install all available updates and then try again. Also, troubleshooting on the add-ins aspect and see if any of the third party add-in is causing the issue.

  • Unable to open connection to MS Access 2013 .accdb file Under WCF Web Service Project Using Windows 8.1 64bit

    I am encountering the following error when trying to connect to an Access 2013 database:
    The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
    I have Visual Studio 2013 SP3 running on Windows 8.1 64bit OS which also has Office 2013 installed (which includes MS Access 2013).  My project is a WCF web service using .NET Framework 4.5.1 using any cpu as target.  I have tried reluctantly
    to install the older drivers as described by in the below article:
    https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
     and also went through the "Add Data Source" wizard in the Project menu to have the connect string automatically built.  Even with the automatically built connect string I can not connect to the .accdb file from within my WCF web service.
    What's odd is if I use the Database Explorer in Visual Studio it has no problem connecting the my Access file.  I inspected the connect string and tried to use it as well but still get the same error. Even stranger is that I have no problem connecting
    to the Access DB in an ASP.NET project on the same PC. I am also able to connect to the Access file using a simple Windows Forms application.  So I'm wondering if it has something to do with trying to connect to the Access file from a WCF web service
    project.
    What I'd like to know is if anyone has been able to get this to work in an environment as I described above as a 64bit WCF web service project?  I tried to switch my project to 32bit but when I do I get a different error which reads:
    System.BadImageFormatException: Could not load file or assembly 'file:
    Almost to the point of trying to get this web service project done with SQL Express but would like to know if it can be done with MS Access 2013.  Any information anyone can provide to help me get past this issue is greatly appreciated. Thanks.

    Have you installed the 64-bit Access driver on your machine? See
    Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
    How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
    When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
    Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • PowerShell command To configure Access Service 2010 in sharepoint 2013 server

    HI ,
    can any body give reference for Powershell command for
    Access Service 2010
    I am currently able to run powershell command for
    Access Service .
    But in sharepoint 2013,Access Service 2010 is a new service, but i am not able to see any refernce blog for command.

    Hi,
    According to your description, you want to configure Access Service 2010 in SharePoint 2013 server by using a Windows PowerShell.
    Take a look at an articles about configuring services and service applications in SharePoint 2013:
    http://technet.microsoft.com/en-us/library/ee794878(v=office.15).aspx
    Updates on how to do a lot of these (include
    configure Access Service 2010 ) with PowerShell haven't really been released yet. 
    Here is an article about configuring a service application by using a Windows PowerShell script (SharePoint Server 2010), you can use as a reference:
    http://technet.microsoft.com/en-us/library/gg983005(v=office.14).aspx
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • Remote Desktop Services Properties - Operation failed: Access is denied

    Hi
    when i try to change the Remote Desktop Services User Profile Path with ADUC i get the error "Operation failed: Access is denied"
    This error occurs in a subdomain with the Domain Admin of the Subdomain. I'm able to change this attribute with the Enterprise Admin.
    As far as I understand this attribute is set in the userParameters but I don't know what permissions must be set to allow the Domain Admin to change this Attribute and why the Enterprise Admin is allowed to change the Attribute and the subdomain Admin not.
    Our AD Schema is 2003.

    Hi,
    As per I know, this is by design because enterprise admin has full control in every domain within the forest but sub domain admin only has full control in its own domain. SO when subdomain admin try to modify they receive error instead of enterprise admin.
    But still if you want to assign the permission to subdomain user to change then you can delegate below permission to user.
    Read msTSProfilePath
    Write msTSProfilePath
    Snap:
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Accessing ASDM through MS Remote Desktop Services session based system

    I am setting up a MS Remote Desktop Services system for a client.  This is being configured as a jump server so everyone at the client will go through this system (aka jump server) to access systems via ssh, https, etc that are in a restricted part of the network.  I am running into a problem getting ASDM to work.  I can bring up the initial web page directly on the server via Internet Explorer, so that tells me I can get to the ASA.  I have installed Java 1.7.10 as this is the recommended version on looking at the Java site for Windows 2012.  When I try to install the dm_launcher, it says that Java isnt installed..
    Has anyone been able to get this to work ?
    Ron

    I've used ASDM fine from an RDS platform. I used Java 7 update 45. How are you trying to install the launcher?
    Sent from Cisco Technical Support iPad App

  • Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack?

    Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack? ie. When will we see Access 2013 Runtime Service Pack 1?

    Hi,
    There has no exact information about the Access 2013 Runtime Service Pack 1 now. We can continue to pay attention about it in the Microsoft Official website.
    Regards,
    George Zhao
    TechNet Community Support

  • Anywhere Access: There is an error in your Remote Desktop Services Settings.

    On my server2012 Essentials machine Anywhere Access is giving me this error:
    "There is an error in your Remote Desktop Services Settings."  and tells me it cannot be automatically repaired and to contact support.
    Here's where I made my mistake:  I went into IIS and changed the bindings for the Default Website to another port than 443, but then changed it back again.
    Is this a cerificate Issue? Or any other cause? Could anyone help me to solve this problem?

    Hi ErikLely,
    Before going further, would you please let me know if the error message you described was complete? If not, please post the complete error message or provide a screenshot.
    It will help us to narrow down this issue. Besides, can you remember which operation you do before this issue occurred or just sudden?
    In addition, please check the Event Viewer. In Event Viewer, please follow the path:
    Applications and Services Logs-> Microsoft->
    Windows-> TerminalServices-LocalSessionManager and
    TerminalServices-RemoteConnectionManager. If any errors you can find, please don’t hesitate to post it here and let me know.
    By the way, please refer to the following article and check if configure Access Anywhere correctly.
    Manage Anywhere Access in Windows Server Essentials
    http://technet.microsoft.com/en-us/library/jj730374.aspx
    Please also refer to the following articles and do some general troubleshooting, then check if can narrow down this issue.
    Troubleshoot Anywhere Access in Windows Server 2012 Essentials
    http://technet.microsoft.com/en-us/library/jj673001.aspx
    Remote Desktop Services: Troubleshooting
    http://technet.microsoft.com/en-us/library/ff404143(v=WS.10).aspx
    Hope this helps.
    Best regards,
    Justin Gu

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • Cannot run more than one instance of a remote app in remote desktop services Server 2012

    All,
    I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done.  We may have 12 or more students accessing and trying to run the Olyvia application
    at any one time.
    All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time.  That is, when I start up "olyvia" on a Mac, it works great.  If I leave it up and running, and then try
    and start up "olyvia" on an iPad (using different accounts), I get the following error message:
    "Cannot run more than one instance of this program simultaneously.  Either the program is already running, or it has not been terminated completely."
    I need to understand the root issue.
    1.  Is this a licensing issue?  So, I need to add some CALs to the RDS server?
    2.  Is this a application issue with "olyvia"?  So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
    3.  Did I not "publish" the application correctly?
    4.  Is this happening because I followed the "quick start" guide?
    Appreciate any help I can get on this.  We have no problem getting CALs, I just need some help with the root issue.
    Thanks,
    Geoff Weatherford
    CVMBS, CSU

    Hi Geoff,
    Each application uses different techniques for determining if multiple instances are running.  If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
    In the best case you really should direct your question to the maker of Olyvia.  The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why?  Is it related to Licensing? 
    Compatibility?  If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
    -TP

  • Windows 2012 R2 Active Directory Domain Services and Remote Desktop services Role on the same server.

    Findings: 
    Currently, Windows 2012 R2   AD DS role and RDS With Broker services can only seem to coexist properly in a new domain not an existing domain. Any attempt to add to an existing domain causes internal database user access denied issues and any attempt to
    adjust rights and circumvent is dubious at best.
    The escalation technician said it best. Out of 50 clients that want to do this, they end up not being able to help 5 right off the bat for whatever reason. As for the other 40 they might be able to help by running reports, adjusting rights and trying to add
    the roles until it works.  This can end up being a 20 day process. Basically they are playing whack-a-mole with user rights and permissions until something sticks.
    We tried creating an OU where any other domain policies would not be inherited to see if that was the issue, a fresh install with different sequence of adding the Roles, no effect.
    Given the errors I witnessed when running procmon and then trying to add the roles, the NT System and the Windows Internal database user had access denied issues on 100+ registry keys when trying to add the roles. After that the system is not behaving normally.
    The errors displayed almost mirror the errors that would occur on Windows 2012 when those two roles would be added which of course is officially NOT supported on that system.
    This blog needs serious revision:
    http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
    This is the excerpt from that blog: Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller.  In addition, we published
    guidelines for how RD Session Host could be used without the RD Connection Broker.
    Microsoft Support was curteous and helpful and they were the ones who advised cutting our losses, which mirrored my hunch after seeing what was transpiring in the system.  They refunded my money for the support call. 
    For me, it was an opportunity to find out if there was any way to configure Windows 2012 R2 in the Same manner that it was setup as Windows 2008 R2 and lay that to rest. The coexistence is poorly implemented. It is as if there was a reaction from all the deprecation
    of bread and butter features such as shadowing in TS and the coexistence of AD DS and RDS to where those features were re-added haphazardly. (I have no complaints on shadowing on Windows 2012 R2 it works, just do not like having to go to server manager to
    use it).
    I opted for virtualizing the Domain controller to eliminate the incompatibility issues and that is what I will be doing from now on. I found free solutions for backing up and reporting for virtual machines as well as the suggested procedures for configruing
    a Domain controller as a virtual machine on a Hyper-V environment and I will be sticking to those. Thus far the setup has been operational.
    I am not allergic to virtualization, but for really small setups it adds additional time and considerations but if that is how it has to be done, so be it. Windows 2008 R2 days are numbered and since we can usually squeeze 5-7 years on quality server equipment,
    buying a Windows 2008 R2 setup now is a borderline disservice in my opinion.
    Hopefully someone finds this useful and saves some time.

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you need any other assistance?
    Based on your description, you are describing your story of successfully implementing RDS server with AD role and more regarding all RDS related scenario. For shadowing feature, you can use with command also. Below is the syntax to shadow a session.
    mstsc /v:<ServerName> /shadow:<SessionID>
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Windows Components/remote desktop services/remote desktop session host/profile doesn't appear to be working on 2008R2 boxes

    I have two domains.   One is an account domain with a one way trust with the resource domain.   Resource domain trusts the account domain and has a number of 2008R2 servers running within.  I am experiencing severe logon delays
    due to these servers being unable to access the server that hosts the user home folder specified directly on the user account profile tab from the account domain.   When using my workstation in the actual account domain (corporate) I have no
    problems.
    Because of these network restrictions,  I need to override the 2008R2's desire to access that user home folder location in the account domain.
    So far the best thing I have found to try is Windows Components/remote desktop services/remote desktop session host/profile/Set Remote Desktop User Home Directory
    The problem is that so far I have tried to configure this to point to both a local folder as well as a network path and it doesn't appear to be doing anything.   Not seeing any errors in the app or system log either.
    It is still trying to map the path in the account domain.
    Any ideas?
    Is there a better way to accomplish my goal?   The servers in the resource domain will be Citrix servers and there will be a lot of users connecting from the account domain.
    I tried this setting too,  but it only seems to work on the 2012 machines in my Resource domain.
    With the introduction of Windows 8 and Windows Server 2012 there is now a new group policy setting called “Set user home folder” and is found under Computer Configuration > Policies > Administrative Templates > System > User Profiles
    Help!

    Hi,
    This might be due to permission problems. Please check whether the user accounts for whose home folder to be redirected have permissions in the shared folder specified in the server. 
    Checkout the below link on Best Practice for creating Roaming Profile and Folder Redirection
    http://www.grouppolicy.biz/2010/08/best-practice-roaming-profiles-and-folder-redirection-a-k-a-user-virtualization/
    Regards,
    Gopi
    JiJi
    Technologies

  • Microsoft Access 2013 Database Invoice

    I am trying to use a Database Invoice template provided by Access 2013.  I am having trouble making some vital alterations, including making values non-dependent on each other.
    For example, I don't want the total price to be dependent on the hours tab.  I would actually prefer if the hours tab wasn't even there. 
    I can submit a screenshot if need be. 
    Thank you very much for your assistance.

    Hi,
    Which Database Invoice template do you use? I find Access 2013 provide 6 template which include the invoice.
    And then I download one of them (Desktop Product inventory database) to customize the invoice report.
    Right click invoice report > Choose design Mode
    If I misunderstand something, please let me know and upload some screenshots.
    Regards,
    George Zhao
    TechNet Community Support

Maybe you are looking for