Desktop Software 4.7 installation will not read setup.ini

I am trying to create a silent install for Desktop Software 4.7 using the following.
BlackberrySetup.exe /S /v USEINI=setup.ini /qn
I've also tried without the USEINI with same results.
setup.ini
[INSTALL_OPTIONS]
COUNTRY = United States
SETUPTYPE = Internet
USERS = AllUsers
MAILSERVER = Lotus
SHORTCUTDESKTOP = False
SHORTCUTSTARTUP = False
ENABLE_AUTOMATIC_UPDATE = False
UNINSTALLEXISTINGHANDHELDS = False
SUPPRESSREBOOT = True
The shrcuts for Desktop & startup are present after the install & my existing handheld codes get removed.

Looking at the install log, the Desktop Software appears to be reading the setup.ini file, but the end result is that the settings I specified are not implemented.

Similar Messages

  • LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

    LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

    Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

  • Upgraded Blackberry Desktop software and now it will not accept my device password. What's happened?

    I've upgraded the software on my desktop and connected my Bold 9700 to my computer.  It asked me for my device password but it's not accepting it.  I'm up to 8/10 tries and I know I'll have issues if I keep trying.  I've disconnected my bb but it is still wanting a password and not accepting it.
    Also the password field on my bb is showing me the characters I'm typing in as opposed to astericks.
    I don't know what is happening and I don't want to lose all my data.  Help!
    Solved!
    Go to Solution.

    I found the answer.  I was entering the wrong password and not realizing it.  sorry if i waster your time reading this.

  • Will not read tiger software

    I recently bought tiger to upgrade from panther and my imac will not read the software disk. it may read it once in every ten tries but after having to restart the computer it will not read it. So I have been unable to install it. can anyone help?
    imac g4   Mac OS X (10.3.9)  

    What exactly do you mean by, "will not read the software disk?" Do you mean it won't start up from the DVD? Do you mean you cannot list the files on the DVD?
    Does the disc have a black label with large gray "X" or does it have a gray label? The latter is an OEM disc that can only be used with the computer model with which it came. Does the DVD have the word Upgrade printed on the label?
    If you are trying to boot from the DVD are you doing it correctly? Insert disc into the optical drive and wait until it mounts on the Desktop. Restart the computer and after the chime press and hold down the "C" key. Wait for the gray startup screen to appear. Release the key when the spinning gear appears beneath the dark gray Apple logo.

  • I have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    Handbrake is not ideal for this.
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • My disc drive on Mac Pro will not read installation dvds

    I have been trying to install some software on my Mac Pro  - OS 10.8.  It will not read the installation DVD.  It acts like it is blank.  I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!
    Please help I payed a lot for this software and cant use it.

    persyna wrote:
    ...I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!...
    Since you're on your second optical drive, does the new one (and, for that matter the old one) read any optical disk? If it does, then there might still be something wrong with the disk from that manufacturer. If no disk is readable, I'd doublecheck the cabling to the drive. I'd also call OWC tech support. I've dealt with them for many years and they've always been very helpful with any problems.
    As far as the software goes, you bought a license as well as an installer disk. Does the manufacturer have a website from which you could download a trial version of the software that could be converted to a full, operating version with the license key that should have come in the box with the disk?

  • Sound card Installer will not launch

    Hello folks,
    I've downloaded & tried to install a Roland UA-1EX USB sound card driver for OS 9 and the installer will not launch.
    I already use the unit with OSX.
    Usually these are VISE installers with a blue icon but this one decompresses into a white generic document.
    I have had exchanges with technical support & whilst being helpful he swears the file is ok.
    I used Filetyper to look at the file to see if I could correct the filetype & tried comparing to other similar installers but with no success.
    I have a ResEdit to but don't know how to use it.
    I went to the ftp site & downloaded it from there as opposed to the support site, still no joy.
    I've tried different ways of decompressing & checked on my other computers but I can't get it to launch.
    I get the feeling he is not actually loading it up on an OS machine but I haven't come out & said it...
    Can anyone help?
    here's a screenshot of the windows...
    http://www.swampnet.demon.co.uk/pix1/installer_problem.png
    Cheers,
    Steve

    I found that download off a link on this page:
    http://www.rolandus.com/products/productdetails.php?ProductId=743
    It is full of warnings that it cannot be used or installed under Classic.
    I must also give you the usual warning that any Mac software (Applications and some other files) unpacked on a PC will be damaged beyond repair. Final unpacking MUST be done on a Mac.
    When I unpack the .sit file, I get an Installer vise 3.6 Lite Installer file, plus the other files shown in your windows. They do not have blank Icons.
    Have you tried rebuilding the OS 9 Desktop File lately ? (Hold down Command and Option when the Finder is starting up.) This sometimes solves such problems.

  • Adobe Reader will not read pdf files on internet

    I have lastest version of Adobe reader on a new mac running OS 10 Maverick. This has latest safari (7.0.1) as my internet browser. My adobe reader reads pdf files already present on my desktop, but will not read pdf files from the internet even after I allow "trust" this site. Can anyone help me to resolve the issue please. Is it a bug that Adobe has not solved??

    Sorry if you did not understand my instructions.
    Regarding bullet point 4: Check Reader >Preferences > Internet > Web Browser Options> The blessed app should be " /Applications/Adobe Reader.app"
    You specified that you don't see the path, then it might be some problem in your installation.
    Please see the attached image and let me know what you see on your system.
    Regarding bullet point 5: Load PDF in Safari.
    This means open any PDFs in Safari web browser.
    Please make sure the below highlighted plug-ins are installed on your system by going to the specified path. And make sure the version of the below two plug-ins are 11.0.06. You can find the version by selecting the plugin and hit Command+i.
    Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewerNPAPI.plugin
    Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewer.plugin
    Please let me know if these help.
    Thank You

  • Installer will not install .pkg and .mpkg files.

    Help!
    My specs:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (2.8)
    Number Of CPUs: 1
    CPU Speed: 400 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 640 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    I lost my version of iTunes and attempted to re-install via free download off of Apple.com. Unfortunately, regardless of what version I attempt to install, my Installer will not run .pkg or .mpkg files. It bounces, then disappears without any results.
    I do not have the Tiger disk - as my father gave me this computer a few years ago without it (as it was his old computer).
    I am absolutely distraught without my iTunes and do not know what to do to rectify the situation with my Installer.
    Can anyone help me please???

    Try moving:
    Home (or your user name) > Library > Preferences > com.apple.installer.plist
    to the desktop and restart your computer. This file saves the settings for that service and may be come corrupt. Removing it from the Preferences folder will result in a new file being created with default settings. If this helps you can trash the file but you may need to reset other things covered by that preference. If it doesn't help you can replace the newly created file with the old one and restart to regain the old settings.
    If that doesn't work you will probably have to copy Installer from your backup drive. You absolutely must have a backup, especially if you are going to try to survive without the Tiger discs (which are, strictly speaking, a legal requirement if you want to run Tiger).

  • HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

    Hello,
    this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
    Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address. 
    Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
    Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
    Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
    I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
    Any help is MUCH appreciated. We are kind of stuck...
    Thanks!

    Hi,
    Run some diagnostics and see if any issues are discovered.
    There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
    There is a BIOS update posted for your PC so you might want to consider installing that update.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files  from my Nikon D800 - a very new model.How can I get it to read my RAW files?

    my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW  files?

    iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

  • I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

    I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • PC will not read disc which came with N95 8GB Phon...

    Upgraded to N95 8GB. So far so good, then !!!. Came back from hols to link with PC to find that the CD drive and DVD drive will not read the disc which came with the phone. PC will still read other discs but not the Nokia disc. What is the disc format and can I get what is on the disc elsewhere?

    It's probably just a damaged disc. You can download the PC Suite software from www.nokia.com/pcsuite, as far as I know you can't get replacement CDs.

  • My NI-FBUS 4.0 disk will not read. Can I get a copy?

    My computer's hard drive crashed and my programs need to be re-installed, but my NI-FBUS 4.0 disk will not read. I suspect it is corrupted somehow. Can I buy/get a copy of the disk to match my USB FF interface?

    Hi LJGremillion,
    Besides CD, we also provide the web download for NI-FBUS software. Here is the download page for NI-FBUS 4.0:
    http://joule.ni.com/nidu/cds/view/p/id/1419/lang/en
    If you have any problems in the future, please contact us by emailing [email protected]

Maybe you are looking for