Desktop Software does not detack BB 6 System Software and Language

Hi,
I wanted to install other languages back to my phone (currently only English). However, my Desktop Software 6.1.0.36 installed in Vista does not detect and display BB 6.0.0 system software, and so is language option. BI can see other installed software, even the application installed a day ago, but just cannot see the OS and language.
I tried installed the Desktop Software to other PC, but they were not detected and displayed either. I checked with my other friends, they are able to see the System OS and Language. What can i do ? Anybody encounter the same problem ?
Thanks.

Kindly look for the device requirement online and see if your pc met all the needed requirements.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
Thank you.

Here's how I resolved my issue:
1. On the DM's Applications page, click the "Import files" button.
2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
3. Select the alx files shown.in the files window..
4. Click the "Open" button of the dialog box.
5. Wait for DM to finish processing the selected files.
Voila! Now I see all the apps.
Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

Bought iworks family via download. Apple told me to copy onto usb and then i could transfer to other family members. However, when gragged off usb onto desktop it will not work. Checked system requirments and everything fine. anyone know what the problem

Hi. Bought iwork family as a download rather than on DVD. Want to transfer to other macs in household. Apple told me to transfer to USB stick and then put on other macs. Doesn't work and get message saying "keynote cannot be opened due to a problem". Same problem for .pages and .numbers. I have reinstallled but same problem. Have checked system requirements and everything seems fine.Any one have any ideas how to solve this. Thanks

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

The Remote Desktop Administrator software does not match......

The Remote Desktop Administrator software does not match the installed Client software version.
The Remote Desktop Administrator software must be upgraded on this computer.
This is the message I have when I installed ARD 3.0 on a new Imac running leopard with no ARD installed previously when I opened up ARD for first time - doesn't let me go any further.
Have I missed something here and made a stupid install mistake??
Many thanks
Message was edited by: art_ik

Please search the discussions before posting as this question has been asked and answered more than once.
If this is ARD 3.x, try this:
• Insert your ARD CD
• Open in Finder
• Right click on the Remote Desktop.mpkg and show contents
• Navigate to contents/installers
• Drag the RemoteDesktopAdmin.pkg file onto the workstation and install
• Run Software Update
• Upgrade to 3.1 admin
Otherwise, you'll have to completely uninstall ARD and then reinstall it. Follow these instructions for the uninstall:
http://docs.info.apple.com/article.html?artnum=108021

HT2305 I have Widows 8 but my Itunes wont open I keep getting a message "Itunes software does not install on 64 bit operating system"

I have a Widows 8 laptop. I cant open Itunes. I get a message "Itunes software does not install on 64 bit operating system" Can anyone tell me how to get it installed?

If you are referring to Vista Support, It may be after the new year before it fully supports vista. I have not upgraded to vista yet but I was thinking about it!

Blackberry Desktop Software does not recognize Curve 8310 (on Computer Mass Storage mode is available)

Blackberry Desktop Software does not recognize Curve 8310 (on Computer Mass Storage mode is available).
Can not sync or do anything else. I believe I have the latest versions of Desktop Software and Device software.
Stuck in limbo at this point.

Hi and welcome to the forums!
The most common connection issues are addressed in the attached link.
Let us know how it goes!
Thanks,
Bifocals
KB00125 BlackBerry® Desktop Software cannot detect the BlackBerry® smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

IMovie 10.0 Oct 22, 2013 won't install on my Mac Pro 2008 with OS X 10.9. Software Updater says "Your computer's video card does not meet the minimum system requirements". I have ATI Radeon HD 2600 XT 256 MB. What card SHOULD I have?

After installing Mavericks on my 2008 Mac Pro (10GBRAM, several HDs, 2 x 2.8 GHz Quad-Core Intel Xeon) Software updater says there is an update available. iMovie Apple Version 10.0 Released Oct 22, 2013.
So I click the UPDATE button
Software Updater puts up a dialog that says "Your computer’s video card does not meet the minimum system requirements".
I have ATI Radeon HD 2600 XT 256 MB. What card SHOULD I have?
Thanks.

It is a easy fix to this problem.
I have this video card
iMac 24 inch, early 2008.
Graphics card: ATI Radeon HD 2600 Pro 256 MB .
This is what you do.
1. open app store.
2.go to the update tab.
Yuo will see the imovie icon waiting to install.
3.clic the sub menu tab and select "try apdate in an hour" option from the sub menu.
4.leave the app store window open and came back in an 1hr .
Like magic you will see the imovie app being upgrade it in the lunch pad .
enjoy it.

BlackBerry Desktop Software does not recognize Bluetooth

When I try to add my BlackBerry using Bluetooth the BlackBerry Desktop Software does not recognize it. I have ensured that my BlackBerry is in Listen mode but it won't connect. I know the Bluetooth support on my BlackBerry Storm is working (9550) because it does recognize my laptop.

Hi and welcome to the forums!
We need your PC type, current OS, the version of desktop manager you are using. Here are some suggestions until your provide the details.
Thanks,
Bifocals
KB13130 Cannot use Bluetooth technology to wirelessly synchronize the BlackBerry smartphone with BlackBerry Desktop Manager
KB22387 BlackBerry Desktop Software does not detect a BlackBerry smartphone when the first-time connection is by Bluetooth
KB05143 How to turn on BlackBerry Desktop Manager connection logging
KB18222 BlackBerry fails to connect to Desktop Manager 5.0 via Bluetooth on 64-bit computers with Widcomm Bluetooth stack
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Desktop software does not recognize phone

I have downloaded the latest desktop software, connected my Torch 9800 and successfully synced calendar, contacts etc. with Outlook. When I connect the phone after that, the software does not recognize the phone and will progress to the sync function. I have tried uninstalling and re-installing the desktop software, and the same problem happened again. I have tried the connectivity solutions suggested by the software without any luck. The computer is recognizing the phone, but the software is not. Any ideas out there?

hello!
the problem is because of the outdated software you qare using might be!
get it renewed. use kaspersky antivirus it reminds you for the software and installation procedure!
[url="http://www.dailydeals4you.com/kaspersky-coupon"]kaspersky coupon[/url]
usb cable

Desktop Software does not start - really not at all

Hi everybody,
I hope this is not a common problem...
I installed the latest version of DM (710_b033_multilanguage) successfully on my PC.
Win7 (64bit), 8GB Ram, plenty of Diskspace and sufficient Video HW
As mentioned the installation was successfully.
When I start immediately a windows error message pops up, telling me the the Blackberry Desktop Manager does not work anymore (translated from the original German popup) and that Windows is looking for a solution. Sure enough Windows does not find anything and the window disappears without further notification.
I tried
- reinatalling
- repairing
- installing on SSD as well as on standard HDD
- searching the blog on "not start"
- cussing
- and now posting
Can anybody help - please?
Cheers
T

Thanks :-)
but unfortunately it did not work - still the same error:
Cheers
Thomas

Desktop Manager does not connect to Blackberry Torch 9800

Desktop shows "connecting" then eventually shows error message.
Connections between device and computer are good.
Batteries in both device and computer are charged.
Have had problem since new hard drive in computer installed.
HELP!

Hi and Welcome to the Community!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1237 My MacBookPro9,2 gets error message: "This software is not supported on your system." Audio jack is ignored. What else can I do?

MACBOOK Pro 13-inch Mid 2012
2.9GHz Intel Core i7
8GB 1600 MHz DDR3
Intel HD Graphics 40000 512 MB
Mac OS X Lion 10..5 (11G63)
Model Identifier:                    MacBookPro9,2
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f44
Passed Last Power on Self-Test
The MacBook EFI Updater File that I downloaded from the Apple website for Support:
http://support.apple.com/kb/HT1237
--> shows my Model McBookPro 9,2 as needing
EFI Boot ROM version MBP91.00D3.B08 (EFI 2.9) (http://support.apple.com/kb/DL1593)
SMC version 2.2f44 (SMC 1.8) (http://support.apple.com/kb/DL1633)
I downloaded and tried to run both the files
MacBookProEFIUpdate2.9.dmg 9/19/12
AND
MacBookProSMCUpdate.pkg
as offered on this matrix, which instructs:
"This article lists firmware updates that were released for Intel-based Macs. They update the firmware that originally shipped from the factory. If your computer does not appear on this list, an update from the factory firmware is not necessary.
If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed."
and instead of a message telling me of the proper update
"This software is not supported on your system."
So, why would the manual updater not tell me I already have the proper SMC and EFI updates?
What is the reason I get the message that the software I downloaded from Apple Support is not supported on my system?
Is this indicative of a larger problem with my MACBOOK PRO?

[email protected],
why were you trying to reïnstall the Boot ROM and SMC versions that were already installed on your MacBook Pro?
I agree that a “not supported” message is certainly less clear than an “already installed” message would have been.

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Ive been trying to update my macbook pro 8,2 firmware from the apple website but first the smc update gives me an error saying that my software does not support that update and belive me i checked and iam downloading the correct one

so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
Help please...

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Desktop Software does not detack BB 6 System Software and Language

Similar Messages

Maybe you are looking for