Desktop Software Not Starting Correctly

Greetings all,
When I start my BlackBerry Desktop Manager, I receive the error "The ordinal 6 could not be located in the dynamic link library ilsync.dll".
Which causes me not to be able to sync my phone.
I am running v4.7.0.32[Nov 4, 2008]
Any suggestions?

ralmagor1 wrote:
DID YOU EVER FIND A SOLUTION TO THIS? I AM HAVING THE SAME ISSUE.
Hi and Welcome to the Forums!
Here are some links that, while perhaps not exact, might be useful to you:
KB11327 The ordinal 45 could not be located in the dynamic link library MAPI32.dll
http://hubpages.com/hub/What-People-Think-When-You-Type-in-All-Caps
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

My start Volume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. what can i do to come to the Desktop?

My Startvolume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. What can i do to come to the Desktop?

What do you mean by you "cleaned" it?
Try booting into Safe Mode: http://support.apple.com/kb/HT1564
If you can boot into Safe Mode, try clearing off some space while booted there.

"Plugin did not start correctly" error message

I have the current version of Photomatix Pro loaded as an HDR plugin for Lightroom 3.0. When I try to export the series of images from Lightroom to Photmatix, I get the following message:
     Info
          Plugin did not start correctly
          Please check whether you invoked the plugin by choosing 'File > Plug-in Extras'
The process that I used in Lightroom was to hold down CTRL and select the 5 images while in Lightroom 3.0. The I right clicked, went to Export and then to Photomatix Pro which appears in the list. After doing this, I receive the above message.
The way that I installed the software was to first have Lightroom 3.0 installed and updated. Then I installed the Photomatix Pro software and answered the question during installation that I wanted to use it as a plugin in LR. That was it.
I just discovered something. In LR I went to File, Plugin Extras, Export to Photomatix Pro and this worked!!!! There is evidently a problem with the right click, export to a plugin. Don't know how to pass this on to the developers so if someone does, please do so.
Thanks, Don

Hello @jimboware and welcome to the HP Forums!
As far as I'm aware, there is no Windows 6, did you perhaps mean Windows 7? This What's My OS link will help if you'd like
When you're starting the install, do you plug in the USB cable before the software asks for it?
Let me know that information and we'll go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Satellite M-series does not start correctly

Hello,
I have the following problem: suddenly (don't know why, nothing changed) Satellite notebook shows black white screen with about the following:
(sorry, translated from german):
windows did not start correctly... due to software or hardware change.. pls choose last functional configuration if mistake was due to power shut down...
But this does not work, also all other options (start windows as normal, start in safe mode...did not work.
No idea what happenend !
Problem:
Actually moved to another country and forgot or lost recovery CD ! already contacted Toshiba for new one but maybe anyway somebody can help?

Hmm. Stupid situation. If possible try to obtain Microsoft WXP installations CD to see if you can start installations procedure properly and if you can use repair option too.
It is not easy to say what is wrong there but I just hope there is no problem with HDD. Try to use original recovery disc.

Blackberry Desktop Software not responding

Blackberry Desktop Software Not Responding - receiving this message even after uninstall, reinstall. My device is Curve 8320. Thanks.

I'm facing with the same problem after upgrading my software to 7. when i tried to downgrade it it give's me te same error again and again with every BB device i connect!
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: rim.desktop.exe
Problem Signature 02: 7.0.0.43
Problem Signature 03: 4f2bf8de
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4e154c6c
Problem Signature 07: 1c8a
Problem Signature 08: b
Problem Signature 09: Exception
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Software not installed correctly to communicate with ipod/iphone. This message appears when itunes is opened

software not installed correctly to communicate with ipod/iphone. please install again

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Software not installed correctly to communicate with ipod -Tryed evrything

Hello i am geting the "Software not installed correctly to communicate with ipod" error. I tryed everything on http://docs.info.apple.com/article.html?artnum=93716 nothing worked. I need help for a fix. I was having error 2095 before then i fixed it. Now im having this problem
Ipod: 30 gig video
Computer: HP a1112n

Itunes ver: 6.0.2.23
that rules out one set of possibilities.
okay, we'd better check on the following two possibilities then. (the second one has shown up in itunes 6.0.0.18, 6.0.1.3 and 6.0.4.2, so it's a live possibility with a 6.0.2.23.)
The Tick 247: iTunes not recognizing your nano? Here's a possible solution!
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
love, b

Blackberry Desktop Software Not Working Error Message

Hi All
I have been having issues in getting my blakcberry desktop software for PC to open. I have uninstalled and reinstalled fully several times, and each time when i try and open the application (v7.01), it brings up a message saying 'Blakcberry Desktop Software has stopped working, a problem caused the program to stop working correctly, please close the program'.
I have de-activated the windows checking for solutions to never, as i read this in another post, but that still doesnt solve it.
I have windows 7 professional 64 bit on my laptop. Would appreciate a response on this, as i have to change my phone, and therefore need to sync etc asap.
Regards

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Desktop Software not working

Have a 9300 Curve.
Have installed version 6.1 onto Windows 7 PC - can see it, can find it in my program manager but it doesnt open on the screen when i click it. Opened it as administrator too - no go. Have uninstalled all now.
Did I install correct version

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Desktop Software Not Working on Windows 7

Dear Fellows,
Downloaded and installed Blackberry Desktop Software without any error, but when you click to start the program it says "Blackberry Desktop Software has stopped working" following are the lines shows in detailed information:
"Description:
Stopped working
Problem signature:
Problem Event Name:   CLR20r3
Problem Signature 01:   rim.desktop.exe
Problem Signature 02:   6.0.1.18
Problem Signature 03:   4cfdab9c
Problem Signature 04:   Microsoft.Practices.Composite
Problem Signature 05:   2.0.1.0
Problem Signature 06:   4cfdaa3a
Problem Signature 07:   12b
Problem Signature 08:   50
Problem Signature 09:   SCLHIAANMQHKF4ZDFPVVWEJKPHNM1ZUJ
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt"
and here is the error window image
Any help will be highly appreciated.
Thank,
Patni

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

MAC Desktop Software not connecting

Okay, here is the problem...apart from the missing Languages:
When I connect the 9800 to my MAC utilizing the BB Desktop Software. If I click Applications, the only things that come up are third party Apps that I have downloaded, AccuWeather, The Weather Channel and WhatsApp Messenger. Nothing else shows up!.
Now if I check for updates I get the following message: "BlackBerry Desktop Software could not connect to the update server. There may be a problem with your network connection or the server is not responding. Please try again later". Now obviously I can connect to the internet and read my mail so the network is working fine!
So as to performing a clean reload, they do not apply as it seems its impossible to get that far.
Also I do not understand how the the carrier can determine what is loaded on ones phone. I have tried loading the device software with the SIM card installed and without it, same thing.
Or is it that I am doing something wrong?
I should perhaps mention that I am in Germany and my Carrier is eplus!
I am adding my original post, as I believe my problems are all connected:
Languages Missing
After reinstalling OS Software on 9800 I no longer have the languages that I had before e.g. German, French, Italian, Spanish,…don't get me wrong there are other languages, but the ones I need.
Using the BB Desktop Software I have looked in the Backup/Restore and Applications Folders, but no mention of Languages.
How can I get the others back?
I connected my 9800 to my Mac OS 10.8.4 with the BlackBerry Desktop Software 2.4.0 for the first time. I made a backup and after that somehow my 9800 restarted and then a message came up on screen (Mac) that the device had not been put away correctly, then another message came up that the 9800 did not have an OS installed, it gave 3 options to install all 6.0.0 but with different bundles. I installed the recommended bundle. I have also tried the other bundles, with the same result, which is not the Languages that I require!
MOD EDIT: Subject changed to reflect a new topic

Hello nealpferd,
Thank you for your question regarding BlackBerry Desktop Software for Mac and language support.
All language packs for BlackBerry smartphones are provided to BlackBerry smartphone users by the wireless service provider where the BlackBerry smartphone was purchased. The language packs are contained in the BlackBerry Device Software for the specific BlackBerry smartphone model and specific wireless service provider.
Please refer to the following article regarding language support on your BlackBerry smartphone:
How to obtain language packs for BlackBerry smartphones - http://www.blackberry.com/btsc/KB13067
Regarding the "BlackBerry Desktop Software could not connect to the update server" message, do you know if your device is currently active on a BlackBerry Enterprise server or was at one point?
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Windows 7 and Desktop software not auto-syncing

I have a BB Bold 9700, Windows 7 Ultimate, and latest desktop software from BB site. The issue is that the sync doesn't start when device connected. I have to manually initiate the sync and it works fine. When I was using Windows XP and I connected my device, the hardware was detected and the sync process started automatically...as it should. I have ensured that the "synchronize the selected items when your device is connected to the BlackBerry Desktop Manager" is selected. I even disabled that, shut it down, restarted it and reenabled it to see if that would work and it didn't. As I said, the phone syncs fine when initiated manually, but it won't start on its own.
Any help would be appreciated.

Hi and welcome to the forums!
Try this troubleshooting article for USB desktop connections.
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB00125&sliceId=1&docTy...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Windows 8.1 desktop PC not starting after hibernation

Hi,
I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
and such but this new one is hard to figure out without a desciption.
First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
white text on blue background), I got to a black page with grayish text telling me the following:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc [...]
2. Choose your language [...]
3. Click "Repair your computer."
File: \Windows\system32\winload.exe
Status: 0xc000000f
Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
Errors:
1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
Sorry if this post is a bit of messed up, that's about how I feel right now... :)
Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
Many thanks in advance.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

VisualVM not starting correctly

I have on some Linux servers a weird behaviour of jvisualvm.
Java --> jdk1.6.0_43
Linux + X11-Xming for graphics.
The first time I start the tool, it starts coorectly. Then I close the tool and restart, and from then on I see the logo dialog, and then the tool seems to hang.
I see two processes running
root     31369 29806 0 10:41 pts/2    00:00:00 /bin/bash ./../lib/visualvm//platform/lib/nbexec --jdkhome ./.. --branding visualvm --clusters ./../lib/visualvm//visualvm:./../lib/visualvm//profiler: --userdir /root/.visualvm/7 -J-client -J-Xms24m -J-Xmx256m -J-Dsun.jvmstat.perdata.syncWaitMs=10000 -J-Dsun.java2d.noddraw=true -J-Dsun.java2d.d3d=false
root     31465 31369 0 10:41 pts/2    00:00:08 /opt/jdk6/bin/java -Djdk.home=/opt/jdk6 -classpath /opt/jdk6/lib/visualvm/platform/lib/boot.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-modules.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-util.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-util-lookup.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/boot_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/boot_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-modules_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-modules_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util-lookup_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util-lookup_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util_zh_CN.jar:/opt/jdk6/lib/dt.jar:/opt/jdk6/lib/tools.jar -Dnetbeans.dirs=./../lib/visualvm//visualvm:./../lib/visualvm//profiler: -Dnetbeans.home=/opt/jdk6/lib/visualvm/platform -client -Xms24m -Xmx256m -Dsun.jvmstat.perdata.syncWaitMs=10000 -Dsun.java2d.noddraw=true -Dsun.java2d.d3d=false -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/root/.visualvm/7/var/log/heapdump.hprof org.netbeans.Main --userdir /root/.visualvm/7 --branding visualvm
Before starting I checked if the lock file is cleared and this is the case.
The messages.log contains:
>Log Session: Wednesday, June 26, 2013 11:00:55 AM CEST
>System Info:
Product Version         = Java VisualVM
Operating System        = Linux version 2.6.18-194.26.1.0.1.el5 running on amd64
Java; VM; Vendor        = 1.6.0_43; Java HotSpot(TM) 64-Bit Server VM 20.14-b01; Sun Microsystems Inc.
Runtime                 = Java(TM) SE Runtime Environment 1.6.0_43-b01
Java Home               = /opt/jdk1.6.0_43/jre
System Locale; Encoding = en_US (visualvm); UTF-8
Home Directory          = /root
Current Directory       = /opt/jdk1.6.0_43/bin
User Directory          = /root/.visualvm/7
Installation            = /opt/jdk6/lib/visualvm/visualvm
                            /opt/jdk6/lib/visualvm/profiler
                            /opt/jdk6/lib/visualvm/platform
Boot & Ext. Classpath   = /opt/jdk1.6.0_43/jre/lib/resources.jar:/opt/jdk1.6.0_43/jre/lib/rt.jar:/opt/jdk1.6.0_43/jre/lib/sunrsasign.jar:/opt/jdk1.6.0_43/jre/lib/jsse.jar:/opt/jdk1.6.0_43/jre/lib/jce.jar:/opt/jdk1.6.0_43/jre/lib/charsets.jar:/opt/jdk1.6.0_43/jre/lib/modules/jdk.boot.jar:/opt/jdk1.6.0_43/jre/classes:/opt/jdk1.6.0_43/jre/lib/ext/localedata.jar:/opt/jdk1.6.0_43/jre/lib/ext/sunpkcs11.jar:/opt/jdk1.6.0_43/jre/lib/ext/sunjce_provider.jar:/opt/jdk1.6.0_43/jre/lib/ext/dnsns.jar
Application Classpath   = /opt/jdk6/lib/visualvm/platform/lib/boot.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-modules.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-util.jar:/opt/jdk6/lib/visualvm/platform/lib/org-openide-util-lookup.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/boot_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/boot_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-modules_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-modules_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util-lookup_ja.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util-lookup_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/lib/locale/org-openide-util_zh_CN.jar:/opt/jdk6/lib/dt.jar:/opt/jdk6/lib/tools.jar
Startup Classpath       = /opt/jdk6/lib/visualvm/platform/core/org-openide-filesystems.jar:/opt/jdk6/lib/visualvm/platform/core/core.jar:/opt/jdk6/lib/visualvm/platform/core/locale/org-openide-filesystems_ja.jar:/opt/jdk6/lib/visualvm/platform/core/locale/core_ja.jar:/opt/jdk6/lib/visualvm/platform/core/locale/org-openide-filesystems_zh_CN.jar:/opt/jdk6/lib/visualvm/platform/core/locale/core_zh_CN.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/com-sun-tools-visualvm-modules-startup.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/locale/.svn_zh_CN.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/locale/core_visualvm.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/locale/com-sun-tools-visualvm-modules-startup_zh_CN.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/locale/.svn_ja.jar:/opt/jdk6/bin/../lib/visualvm/visualvm/core/locale/com-sun-tools-visualvm-modules-startup_ja.jar
INFO [org.netbeans.core.startup.NbEvents]: Turning on modules:
org.openide.util.lookup [8.3.1 110131-9c8b3bfb3a1e]
org.openide.util [8.6.1 110131-9c8b3bfb3a1e]
org.openide.modules [7.17.2 110131-9c8b3bfb3a1e]
org.openide.awt [7.23.1 110131-9c8b3bfb3a1e]
org.netbeans.api.progress/1 [1.20.2 110131-9c8b3bfb3a1e]
org.openide.dialogs [7.15.1 110131-9c8b3bfb3a1e]
org.openide.nodes [7.16.1 110131-9c8b3bfb3a1e]
org.openide.windows [6.33.1 110131-9c8b3bfb3a1e]
org.openide.filesystems [7.38.2 110131-9c8b3bfb3a1e]
org.netbeans.modules.editor.mimelookup/1 [1.16.1 110131-9c8b3bfb3a1e]
org.openide.text [6.30.1 110131-9c8b3bfb3a1e]
org.netbeans.swing.tabcontrol [1.21.1 110131-9c8b3bfb3a1e]
org.netbeans.swing.outline [1.9.1 110131-9c8b3bfb3a1e]
org.openide.explorer [6.28.2 110131-9c8b3bfb3a1e]
org.openide.actions [6.16.1 110131-9c8b3bfb3a1e]
org.openide.io [1.23.1 110131-9c8b3bfb3a1e]
org.netbeans.core.io.ui/1 [1.8.1 110131-9c8b3bfb3a1e]
org.netbeans.bootstrap/1 [2.33.1 110131-9c8b3bfb3a1e]
org.netbeans.core.startup/1 [1.25.2 110131-9c8b3bfb3a1e]
org.netbeans.modules.autoupdate.services [1.20.1 110131-9c8b3bfb3a1e]
org.netbeans.spi.quicksearch [1.6.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.queries/1 [1.19.1 110131-9c8b3bfb3a1e]
org.openide.loaders [7.16.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.keyring [1.1.2 110131-9c8b3bfb3a1e]
org.netbeans.swing.plaf [1.16.1 110131-9c8b3bfb3a1e]
org.netbeans.core/2 [3.20.2 110131-9c8b3bfb3a1e]
org.netbeans.modules.options.api/1 [1.18.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.autoupdate.ui [1.16.1 110301-30e4969ec30f]
org.netbeans.modules.print [7.5.1 110201-9c8b3bfb3a1e]
org.netbeans.lib.profiler/1 [1.10.2 110225-30e4969ec30f]
org.netbeans.lib.profiler.charts/1 [1.6.1 110201-f994a39d39de]
org.netbeans.lib.profiler.ui/1 [1.9.2 110225-30e4969ec30f]
com.sun.tools.visualvm.uisupport/0 [1.0 110325]
org.netbeans.lib.profiler.common/1 [1.10.2 110225-30e4969ec30f]
org.netbeans.api.annotations.common/1 [1.5.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.profiler.oql/0 [0.5.1 110225-30e4969ec30f]
org.openide.execution [1.18.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.profiler/1 [1.17.2 110225-30e4969ec30f]
org.netbeans.modules.sendopts/2 [2.9.1 110201-9c8b3bfb3a1e]
com.sun.tools.visualvm.core/0 [1.4 110325]
com.sun.tools.visualvm.host/0 [1.0 110325]
com.sun.tools.visualvm.application/0 [1.4 110325]
com.sun.tools.visualvm.tools/0 [1.2 110325]
com.sun.tools.visualvm.attach/0 [1.1 110325]
com.sun.tools.visualvm.profiling/0 [1.0 110325]
com.sun.tools.visualvm.profiler/0 [1.1 110325]
org.netbeans.modules.settings/1 [1.26.1 110131-9c8b3bfb3a1e]
com.sun.tools.visualvm.coredump/0 [1.0 110325]
com.sun.tools.visualvm.heapdump/0 [1.1 110325]
com.sun.tools.visualvm.threaddump/0 [1.0 110325]
com.sun.tools.visualvm.sampler [2.0 110325]
com.sun.tools.visualvm.charts/0 [1.0 110325]
com.sun.tools.visualvm.application.views/0 [1.0 110325]
org.netbeans.modules.progress.ui [1.12.1 110201-9c8b3bfb3a1e]
org.netbeans.core.windows/2 [2.21.1 110131-9c8b3bfb3a1e]
org.netbeans.modules.editor.mimelookup.impl/1 [1.9.1 110131-9c8b3bfb3a1e]
com.sun.tools.visualvm.host.remote/0 [1.0 110325]
com.sun.tools.visualvm.jmx/0 [1.2 110325]
com.sun.tools.visualvm.sa/0 [1.0 110325]
com.sun.tools.visualvm.jvm/0 [1.1 110325]
com.sun.tools.visualvm.modules.startup [1.0 110325]
org.netbeans.core.ui/1 [1.22.1 110131-9c8b3bfb3a1e]
com.sun.tools.visualvm.host.views/0 [1.0 110325]
com.sun.tools.visualvm.modules.appui [1.0 110325]
org.netbeans.modules.masterfs/2 [2.25.2 110201-9c8b3bfb3a1e]
com.sun.tools.visualvm.jvmstat/0 [1.0 110325]
Any idea why I see this weird behaviour?
Walter

More information
When the application starts correctly the following diagnostic info is given
Diagnostic information
Input arguments:
-Djdk.home=/usr/java/jdk1.6.0_24
-Dnetbeans.dirs=/usr/java/jdk1.6.0_24/bin/../lib/visualvm//visualvm:/usr/java/jdk1.6.0_24/bin/../lib/visualvm//profiler:
-Dnetbeans.home=/usr/java/jdk1.6.0_24/lib/visualvm/platform
-Xms24m
-Xmx256m
-Dsun.jvmstat.perdata.syncWaitMs=10000
-Dsun.java2d.noddraw=true
-Dsun.java2d.d3d=false
-XX:+HeapDumpOnOutOfMemoryError
-XX:HeapDumpPath=/root/.visualvm/6u23/var/log/heapdump.hprof
Compiler: HotSpot 64-Bit Server Compiler
Heap memory usage: initial 24.0MB maximum 247.5MB
Non heap memory usage: initial 23.2MB maximum 130.0MB
Garbage collector: Copy (Collections=9 Total time spent=0s)
Garbage collector: MarkSweepCompact (Collections=1 Total time spent=0s)
Classes: loaded=4051 total loaded=4051 unloaded 0
INFO [org.netbeans.core.ui.warmup.DiagnosticTask]: Total memory 4,141,666,304
INFO [null]: Total physical memory 4,141,666,304
and this is NOT the case when the application hangs at startup.
I tried other JDK version, and same there. Works once, .visualvm is created inside the $HOME location. Close the tool and restart, then it hangs at startup.
Walter

Ifolder not starting correctly ??

hi, i downloaded a vmware image from the opensuse gallery. its called iFolder JeOS heres the link if you want to look at it. iFolder JeOS – SUSE Gallery. i followed the instructions but i did not include ssl or LDAP. i set the machine up to have a static address , 192.168.3.105. it almost seems to work. i can open the ifolder administation page and create a new user. but i notice something wrong, when i select the server tab it shows my server, but when i click on my server it says that my server is offline. if i try to go to https://192.168.3.105/simias10. it says unable to connect. when i start the client machine and go though the ifolder account creation wizard and fill everything in then i press the connect button. i get the following error "an errror was encounteed while connectiong to the ifolder server. please verify the information entered and try again. i feel like a server has failed to start, or was not configured correctly. can anyone help. i used to use linux till about 5 years ago, i got rust all over.

Originally Posted by michaelleewebb
hi, i downloaded a vmware image from the opensuse gallery. its called iFolder JeOS heres the link if you want to look at it. iFolder JeOS – SUSE Gallery. i followed the instructions but i did not include ssl or LDAP. i set the machine up to have a static address , 192.168.3.105. it almost seems to work. i can open the ifolder administation page and create a new user. but i notice something wrong, when i select the server tab it shows my server, but when i click on my server it says that my server is offline. if i try to go to https://192.168.3.105/simias10. it says unable to connect. when i start the client machine and go though the ifolder account creation wizard and fill everything in then i press the connect button. i get the following error "an errror was encounteed while connectiong to the ifolder server. please verify the information entered and try again. i feel like a server has failed to start, or was not configured correctly. can anyone help..
I'd try reconfiguring the server - if you are getting an error on the simias10 page - there is something not right with the base configuration.
On a next reconfiguration, try using SSL. Setting up SSL on openSUSE is not that hard to setup (for example see steps 1 & two in the bit 'Configuring Apache for SSL' : Installing iFolder Server on openSUSE 11.1 & 11.2 | DiWi ).
The rest of that blog is dated as I wrote it for 11.1, but there is an updated blog here
iFolder on OpenSuSE 11.3 full install walkthrough daniel lench
that might help in getting a better pictures of what needs to be configured and shake off the rust a bit :)
Also, the author of the iFolder JeOS might be able to give you some pointers?
Cheers,
Willem

Desktop Software Not Starting Correctly

Similar Messages

Maybe you are looking for