Desktop Software SYnch Issue with Alarm Flags

Hello. I recently upgraded my PC to Windows v.7. As a result, I had to re-install my BB Desktop software. The installation went fine, but the first time I tried to synch I had a problem with a conflict. Apparently all of my appointments on my BB, alarm the flag is set to "true", while my MS Outlook is reading "false" The BB resolution is defaulting to update both fields to the Outlook setting which is "false".
Does anyone know what this is caused by? How to correct it? or what the correct response should be in the conflict resolution?
Thanks

Hello lahigh,
And welcome to Apple Discussions!
Check out this comprehensive post from another forum member Zevoneer on different options for copying media from your iPod to your Mac.
http://discussions.apple.com/thread.jspa?threadID=1900086&tstart=0
B-rock

Similar Messages

"The BlackBerry Desktop Software cannot connect with this device." after repair

I download the Desktop Software for BlackBerry onto my Mac Book Pro for the first time.
After installing I connected my PlayBook. I get the message "The BlackBerry® Desktop Software cannot connect with this device."
The program suggested I repair the device software, so I did. After that I set it up and ran the updates.
When I plug it back in I get the exact same message.
What should I do next?
co-founder of Diaree | BB Dev for PictureThis

I also cannot connect to my two playbooks using desktop manager on mac.
One of the two playbooks is now shipped back to rim for repair (see here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/5MP-Playbook-Camera-Blackscreen-Errors-Ha... The issue of desktop manager not being able to connect to the playbook started with this playbook when the repair I was prompted to to stopped 1/4 way into it. Multiple retries did not make any difference.
Since then, I have tried connecting my other (functioning) playbook to the same mac but when I plug in usb cable I get the same "cannot connect" errmsg and prompted to "repair". I am definitely NOT going to "repair" this one. So I uninstalled the desktop manager and reinstalled it to see if it makes a difference. Unfortunately it did not and I get the same "cannot connect" errmsg.
If anyone has any suggestion how this issue can be resolved that would be great. I think something is stuck on the mac and is not getting wiped out when desktop manager is uninstalled. Thanks.

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook. But, folders (.PST files) may be renamed and there may be multiple such folders open in Outlook at any time. I have six, none of which is named Outlook. Two of those are archival and four are associated and named for email addresses.The Desktop software should list the pst files checkboxes to indicate whether synchronization should be performed with them.

Well I believe I have figured out the answer to my own question, I ended up having to do a repair installation for Office 2010 and I was able to sync from outlook to the Blackberry.

Desktop Software and syncing with Outlook 2010

When will we see the upgrade to Desktop Software that syncs with Outlook 2010?

RIM has stated in August.
http://www.blackberry.com/btsc/KB20654
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New desktop software synching problem

Just tried to synch my Blackberry to my Outlook. Got a message that Intellisynch was no lionger being used, there was a new program and I had to reconfigure the settings. After doing that the program went through the preliminary steps and has now been "Preparing synch review" for 39 minutes - but I'm not supposed to disconnect my phone...

Hello,
From a PC, you can install any OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using Desktop Software for Mac with an 8703e - Can it be done?

I downloaded the new BB desktop software for Mac but it doesn't seem to work with my 8703e device. And since I had to erase the PocketMac software to install the new BB software, I now have no way to synch my Mac and BB. Can anyone shed any light on this?

You might check out the FileBrowser app on iTunes. I haven't used it, but it sounds like what you're after. When you say you can't use the Sierra iG2 with your iPad, I'm assuming you mean you can't plug it into the iPad. If it's plugged into a laptop and offering a WiFi hotspot, the iPad should be good with that. I use the Apple Camera Connection Kit to carry extra movies on an SD card. It uploads only to the Photos app, so no books, etc.

Desktop software version compatible with my Pam T|X

Hello,
I just upgraded from a Palm T5 to a T|X and upgraded my Desktop software from 4.1.4 to 6.2.2 and was horribly disapointed by the lack of features of 6.2.2.. We lost all color categories!
The question is: Is the Palm T|X compatible with the version 4.1.4 of the Destop ? If yes, can I revert to 41.4 without losing my data wchich is the actual 6.2.2 format ?
Thanks,
Roger
Post relates to: Palm TX
Message Edited by Roger_Mtl on 05-09-2009 02:29 PM

If you need 4.2, it's available from my "Manual" link below...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Desktop software and problem with password

Hi
My apologizes for my english but it is not my language.
I have a blackberry curve 9300 since 2 years.
I used to work with the blackberry software for mac.
Since some weeks, I have trouble with this program.
The program invite me to enter my password. Normally, I write my password and it works. But, now, I have a second window which ask me a password too. But my password does not work. This window appear constantly and I can not work on my others programs. To use other program I have to disconnect my device and to force out the second program.
In attachment, you will see the window. (I can not insert an image)
How can I stop this program?
I already uninstalled the software but the problem remain.
Can you help me?????

Hi morbiteus,
Welcome to the BlackBerry Support Community.
So that I can assist you better, can you please provide the name of the second program you are referring to? Does it open each time you open the BlackBerry Desktop Software?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Best Order To Install Desktop Software V4.7 With Roxio Media Creator 10

Hi,
What is the best order in which to install the Desktop software V4.7, I already have Roxio Media Creator 10 on my desktop so am unsure if its okay to install the Desktop software now or remove Media Creator 10 then install the desktop software and finally reinstall the Media Creator 10 software.
I know that the Desktop Software does contain components of version 9 so I dont want to install it over 10 if this will cause an issue.
Any ideas ?
Thanks

Hi!
There are several versions of the DTM software, including versions that leave out Media Manager and Roxio. You can obtain the version of your choice here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Desktop Software Sync Issues

Hello, I'm using a Blackberry 9700 running on os 6.. The problem here is that it cant be charged by the original cable and when connected to the PC it cant be detected by the Blackberry Desktop Software.. It just says "disconnected" and it wont popup so I cant sync... I know its not a problem with the cable or the port because it works with another Blackberry device here... any help would be appreciated thanks...
Blackberry 9700 : os 6
Desktop Software Version : 7.1.0.37
Windows 7 Professional 32 Bit

You've narrowed it down. Can you take the phone to an authorized repair center or check with your carrier? If it works with another blackberry, the cable is fine.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Synching Issues with iphone 4/ itunes

When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated

"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1)

Synching Issues with Self-Paced Learning and Embedded Flash Files

Hi Everyone,
I'm having some issues with my files not properly synching or displaying when Self-Paced Learning is active.
Here is my set-up:
Captivate 5
5 separate Captivate files combined using the Aggregator
Each Captivate file is about 15 slides
Each slide contains an audio file (for closed-captioning) and a single SWF file - the content is all created with Flash and then inserted into Captivate using Insert > Animation
Each SWF file is back 1/10 of a second from the beginning of the Cap timeline (otherwise there are rewind issues when the user selects the slide they are currently viewing from the ToC)
Each embedded SWF has the beginning and ending fade built into it; Captivate is not doing any fading
Synch to Project is selected for each embedded SWF (although it doesn't seem to work all the time)
Self-Paced Learning is active, as well as, Enable Navigation
It is not being loaded to an LMS or using any built-in Captivate quiz features. These are instead custom built AS3 Flash files that are embedded.
Windows 7, 4GB RAM, 1GB Video Card, High-end Processor, etc... a beast.
The Issue:
When the user opens the course, views it for a while and then closes it and returns it will display the first slide of the course for a moment before jumping to the bookmarked slide. This slight timing misstep causes the bookmarked slide to get out of synch. It will sometimes not display the bookmarked slide at all or it will cut-off a small bit from the end of the slide (even with Synch to Project active). It sometimes works fine but randomly will break. The course is set to 100% preload and nothing is being loaded from an external location. It seems to work fine until Self-Paced Learning is activated.
I don't think this is a common development approach for Captivate but it has been very successful with some clients. Has anyone encounted similar issues or does anyone have some suggestions that might resolve this problem?
Thanks!
Greg

It's been mentioned many times on this forum that nesting Captivate SWFs inside other Captivate SWFs gives rise to all kinds of strange issues. Captivate was not designed to work this way. If you choose to do it, and you encounter issues (as you have done) there's usually NOT a lot you can do. There are just too many ways the SWFs can get into bun fights over which one does what.
I suggest you rethink your approach to avoid nesting.

IOS Calendar Synch Issue with Google - iOS 8.1.3

I upgraded to iOS 8.1.3 a few days ago, and since then, am finding that my iPhone is not synching properly with changes to my Google calendar made on other devices. Opening iOS calendar presents me with the spinning wheel for several minutes. To rectify the problem, I have to reboot or shut down the device entirely. When it comes back on, everything works fine.
If this happened just once, I would have chocked it up to an anomaly. However, the behavior I described just happened for the second time in three days. First time was on LTE and this morning while my device was on my home FiOS WiFi.
Nothing else appears awry, and upon reboot via a "soft" shut-down or hard reboot, calendar functions return to normal.
Appreciate some input ....
Many thanks.
- David

I Found if I do a soft reset it triggers my phone to start working though it lasts for 20-30 minutes and resorts back to issue again. I've also noticed AirPlay no longer functions properly which I realized after I updated my iPad to 8.1.3 which I regularly used for AirPlay so I tried it on my iPhone and it didn't work as well I tried it on my wife's iPhone and hers no longer works either. Wow! Disappointed to say the least. I know I can't be the only one frustrated with these 8+ updates as I've read it seems to be ongoing with thousands of others reporting online. It's not just the hard earned money spent on Apple products though when life becomes dependent upon using the products it seriously interfere with use

BlackBerry Desktop Software Installation issue

Hi All,
I have tried to Upgrade BlackBerry Desktop Manager from 3.6 to 4.7 version, and it is successfully upgrade to BlackBerry version 4.7. But the issue is, it shows both version in Control Panel - Add/Remove Programs.
Note: After installation rebooted the PC
Example:
Control Panel --> Add/Remove Programs --> Currently installed Programs
BlackBerry Desktop Manager 3.6
BlackBerry Desktop Software 4.7
Kindly some please advice. Thanks... Shiva

the shortcut startup is the thing that adds (or not) the shortcut in the Startup menu, but the Desktop Manager starting at Windows start is stored in the registry.
I didn't bother to do all that, there is a clear option when you install the desktop manager that asks for automatic startup & automatic upgrade. I don't remember at which point (it's a shame, because I installed it less than 3 weeks ago and have already forgotten ! not eating enough fish), but it's there.
besides, I believe you can untick the option later, maybe in the Device Manager that is next to the windows clock.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Desktop Software on Vista with SP1

Hi All
I am having a BB 8100 Black Pearl, and I was usnig the Device Manager (Desktop Software) v4.2 fine with Windows XP. Recently I had to change my system OS from XP to Vista and now I am not able to install the same version of the Software on my Vista system. I am having Vista Business on my laptop. Can anybody help me to find the correct version of the Device Manager / Desktop Manager Software to work with my Windows Vist and BB Device.
Thanks and Regards
RK

Solved:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02141&sliceId=SAL_Pub...

Desktop Software SYnch Issue with Alarm Flags

Similar Messages

Maybe you are looking for