Desktop Sorftware Version 7.1.0.41 - Translator DLL is not Loaded.

Today, when I attempted to sync my Blackberry with Desktop Sorftware Version 7.1.0.41, I got an error message stating "Trnaslator DLL is Not Loaded".
I tried running the installation package to repair the installation. No success there as the error still occurred.
I next unistalled Desktop Software and installed it from scratch. The error still occurs.
Does anyone know how to fix this?
Regards, Mike

Thanks for your suggestion.
Unfortunately, uninstalling, then reinstalling the software did not solve the problem.
Regards, Mike

Similar Messages

  • Does Desktop Sorftware Version 7.1.0.41 support Outlook 2013?

    Solved!
    Go to Solution.

    No. Refer:
    Article ID: KB12268 Synchronization support for BlackBerry Desktop Software for Windows
    http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am recieving an error on my computer when trying to update my version of itunes. System31\WerConCpl.dll is not a valid Win 32 aplication

    I am unable to update the version of itunes on my computer.

    This may get round the problem if its related to "old" progs on your install disc. I used this method when installing Office 2007 with a packaging date of March 2007 in case it saved lots of product update downloads - worked perfectly but I still had 20+ updates downloaded after install.
    If you have a reasonable broadband speed then [dowload the Office 2007 trial|http://us20.trymicrosoftoffice.com/default.aspx] . MS email and display a trial product key but when the download starts to run don't use this key but your own "full" version product key
    Just re read your post - you are going from trial to full so what you do is follow MS instructions
    Follow these steps to activate the trial:
    Follow these steps to convert the trial:
    You can convert from the trial software to a full-version either before or after your trial period ends.
    Before the trial period ends:
    You will start receiving expiration reminder messages indicating the date when the trial will expire. At this point, you can convert to the full product in two ways:
    1. In any of the expiration reminder messages, click Convert, and then follow the steps in the conversion process, below.
    2. At any time during the trial period (or even after the trial has expired), you can open any of the Microsoft Office System products, and in the Help menu: click "Activate your software".
    After the trial period expires:
    The software goes into reduced functionality mode. Some of the limitations of reduced functionality mode include the following:
    - You can not create any new files.
    - You can view existing files, but you can not modify them.
    - You can print files, but you can not save them.

  • My HP Pavilion Desktop freezes at the HP Invent Logo screen and does not load up BIOS

    Hi,
    This is the first time this has ever happened to me.  What I mean is that I could not open the set up (F10) to change my boot order in the BIOS screen.  When I turn on my desktop it stays on the blue HP Invent logo screen and when I try pressing esc, F9, F10, or F11, it says entering that specific mode but hangs there and nothing happens.  I have searched the internet and forums and could not find a positive solution to try to at least having my computer to get into BIOS or even load into windows.
    I have a HP Pavilion a6642p Desktop.
    Windows 7
    Bought it in 2010 and was working fine when I last used it.
    I have tried cleaning my computer, Unplugging my cords and replugging after a set amount of time, removing my battery for 30 seconds, draining my power, unplugging my hard drive and turning it on like that lets me run from CD because there isn't a hard drive, but I can't do anything else even if I put in a Windows 7 CD to try and reset my computer, but I can't because there isn't a partition to be located.  I have no idea what to do and have been trying for the past 5 days non-stop. :[
    If there's any other information you need please let me know.
    I can also show some photos if what I mean when it freezes on Logo screen and BIOS doesn't load.

    It sounds like the hard drive has failed. A bad hdd can prevent a boot up or ability to enter BIOS.Since you are able to boot from a cd with hdd unplugged that seems to implicate the hdd even more.And the fact that Windows 7 dvd doesn't see a partition to install on. Replace the hdd with a new one of comparable size, boot with your Recovery Disks to reinstall back to factory.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Since uploading Firefox 4 I get error messages saying it can't update and I should be sure I am using the latest version. I am, so why will updates not load?

    The question is in the title. I have had no updates to Firefox 4, just error messages saying they can't be loaded and I should check that I am using the latest version. I have downloaded Firefox 4 again to be sure my copy is up to date but it makes no difference. I still get the error message.

    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    C:\Users\&lt;user&gt;\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

  • Version 3.6.6 and Internet explorer will not load sites, so I reloaded the older 3.6.3 of firefox and websites load fine. Internet Explorer still will not load. The error message corresponding with 3.6.6 was that there were problems with the proxy serve

    Upgraded to 3.6.6 and no sites loaded, error in proxy server. Internet explorer will not load either. Reloaded firefox 3.6.3 and sites load fine, but internet explorer still will not load. I was only able to connect to yahoo messenger when websites were not loading.
    == This happened ==
    Every time Firefox opened
    == I upgraded to 3.6.6

    I have a problem with Firefox loading. It will not load and it says Firefox is using a proxy that refuses connection. Check with your network administrator. How do I get Firefox to work. I've uninstalled it and reinstalled it twice. Any help would be great thanks.

  • IPad Webapp is not loading current version (Change manifest file?)

    Hey guys,
    as u probably you know you can run the webapp in an optimized safari view. You open the URL and say "Add to Home Screen", so its shown as a "real" App.
    Doing so I got a problem after uploading a new Version to the Server. The App is not loading an old version instead of the new one.
    I googled already but couldnt find a answer. But I found a hint, a modification of the manifest.file could help. This file can be found in the folder WebContent/META-INF/MANIFEST.MF.
    Any ideas?
    Thanks and regards
    Chris

    Hi Christoph,
    a developer colleague had positive experiences with the official documentation of Apple:
    HTML5 Offline Application Cache
    Because is's an HTML5 API, you can use it in all current browsers.
    Regards
    Michael

  • I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

    I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

    OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
    There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
    Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
    best
    Matt

  • Desktop Software version 6 wont start??

    Never had a prolem with the Blackberry software until I downloaded V6. Now when I try to open it i get
    "BlackBerry Desktop Software has encountered a problem and needs to close.  We are sorry for the inconvenience."
    Uninstalled and tried 3 times now but keep getting the same message.
    Blackberry device manager can see the phone is there????

    Date|Log Level|Thread ID|Module ID|Log ID|Message [2010-08-28 14:33:20.406]
    14:33:20.531|INFO |1|Rim.Desktop.Shell|1|Application Started
    14:33:20.578|INFO |1|Rim.Desktop.Shell|2|Rim.Desktop.exe Version: 6.0.0.40
    14:33:20.593|INFO |1|Rim.Desktop.Shell|2|OS Version: XP [Microsoft Windows NT 5.1.2600 Service Pack 3]
    14:33:20.593|INFO |1|Rim.Desktop.Shell|2|CLR Version: 2.0.50727.3615
    14:33:21.093|INFO |1|Rim.Desktop.Shell|2|AppLoader Version: 6.0.0.36
    14:33:21.250|INFO |1|Rim.Desktop.Shell|2|Device Manager Version: 6.0.0.11
    14:33:21.328|INFO |1|Rim.Desktop.Shell|2|BBDevMgr Version: 4.1.0.14
    14:33:21.468|INFO |1|Rim.Desktop.Shell|2|Serial USB Driver Version: 2.2.0.3
    14:33:21.531|INFO |1|Rim.Desktop.Shell|2|USB Driver Version: 4.1.0.4
    14:33:24.718|FATAL|1|Rim.Desktop.Shell|0|Fatal Application Error
    System.Windows.Markup.XamlParseException: Cannot convert string '0' in attribute 'Column' to object of type 'System.Int32'. 0 is not a valid value for Int32.  Error at object 'ScreenBackground' in markup file 'Rim.Desktop;component/views/mainwindow.xaml'. ---> System.Exception: 0 is not a valid value for Int32. ---> System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       --- End of inner exception stack trace ---
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       at System.ComponentModel.TypeConverter.ConvertFromString(ITypeDescriptorContext context, CultureInfo culture, String text)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
       --- End of inner exception stack trace ---
       at System.Windows.Markup.XamlParseException.ThrowException(String message, Exception innerException, Int32 lineNumber, Int32 linePosition, Uri baseUri, XamlObjectIds currentXamlObjectIds, XamlObjectIds contextXamlObjectIds, Type objectType)
       at System.Windows.Markup.XamlParseException.ThrowException(ParserContext parserContext, Int32 lineNumber, Int32 linePosition, String message, Exception innerException)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ParseProperty(Object element, Type propertyType, String propertyName, Object dpOrPi, String attribValue, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ReadPropertyRecordBase(String attribValue, Int16 attributeId, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ReadPropertyConverterRecord(BamlPropertyWithConverterRecord bamlPropertyRecord)
       at System.Windows.Markup.BamlRecordReader.ReadRecord(BamlRecord bamlRecord)
       at System.Windows.Markup.BamlRecordReader.Read(Boolean singleRecord)
       at System.Windows.Markup.TreeBuilderBamlTranslator.ParseFragment()
       at System.Windows.Markup.TreeBuilder.Parse()
       at System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
       at System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
       at Rim.Desktop.Shell.Views.MainWindow.InitializeComponent()
       at Rim.Desktop.Shell.Views.MainWindow..ctor(IUnityContainer unityContainer)
       at Rim.Desktop.Shell.Bootstrapper.CreateShell()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration)
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run()
       at Rim.Desktop.Shell.App.OnStartup(StartupEventArgs e)
       at System.Windows.Application.<.ctor>b__0(Object unused)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.Run()
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at Rim.Desktop.Shell.App.Main()
    14:33:28.921|FATAL|1|Exception|0|Fatal Error
    System.Windows.Markup.XamlParseException: Cannot convert string '0' in attribute 'Column' to object of type 'System.Int32'. 0 is not a valid value for Int32.  Error at object 'ScreenBackground' in markup file 'Rim.Desktop;component/views/mainwindow.xaml'. ---> System.Exception: 0 is not a valid value for Int32. ---> System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       --- End of inner exception stack trace ---
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       at System.ComponentModel.TypeConverter.ConvertFromString(ITypeDescriptorContext context, CultureInfo culture, String text)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
       --- End of inner exception stack trace ---
       at System.Windows.Markup.XamlParseException.ThrowException(String message, Exception innerException, Int32 lineNumber, Int32 linePosition, Uri baseUri, XamlObjectIds currentXamlObjectIds, XamlObjectIds contextXamlObjectIds, Type objectType)
       at System.Windows.Markup.XamlParseException.ThrowException(ParserContext parserContext, Int32 lineNumber, Int32 linePosition, String message, Exception innerException)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ParseProperty(Object element, Type propertyType, String propertyName, Object dpOrPi, String attribValue, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ReadPropertyRecordBase(String attribValue, Int16 attributeId, Int16 converterTypeId)
       at System.Windows.Markup.BamlRecordReader.ReadPropertyConverterRecord(BamlPropertyWithConverterRecord bamlPropertyRecord)
       at System.Windows.Markup.BamlRecordReader.ReadRecord(BamlRecord bamlRecord)
       at System.Windows.Markup.BamlRecordReader.Read(Boolean singleRecord)
       at System.Windows.Markup.TreeBuilderBamlTranslator.ParseFragment()
       at System.Windows.Markup.TreeBuilder.Parse()
       at System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
       at System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
       at Rim.Desktop.Shell.Views.MainWindow.InitializeComponent()
       at Rim.Desktop.Shell.Views.MainWindow..ctor(IUnityContainer unityContainer)
       at Rim.Desktop.Shell.Bootstrapper.CreateShell()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration)
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run()
       at Rim.Desktop.Shell.App.OnStartup(StartupEventArgs e)
       at System.Windows.Application.<.ctor>b__0(Object unused)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.Run()
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at Rim.Desktop.Shell.App.Main()
    14:33:28.937|FATAL|1|Rim.Desktop.Shell|0|Fatal Application Error - Inner Exception
    System.Exception: 0 is not a valid value for Int32. ---> System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       --- End of inner exception stack trace ---
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       at System.ComponentModel.TypeConverter.ConvertFromString(ITypeDescriptorContext context, CultureInfo culture, String text)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
    14:33:28.937|FATAL|1|Exception|0|Fatal Error - Inner Exception
    System.Exception: 0 is not a valid value for Int32. ---> System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       --- End of inner exception stack trace ---
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
       at System.ComponentModel.TypeConverter.ConvertFromString(ITypeDescriptorContext context, CultureInfo culture, String text)
       at System.Windows.Markup.XamlTypeMapper.ParseProperty(Object targetObject, Type propType, String propName, Object dpOrPiOrFi, ITypeDescriptorContext typeContext, ParserContext parserContext, String value, Int16 converterTypeId)
    14:33:28.937|FATAL|1|Rim.Desktop.Shell|0|Fatal Application Error - Inner Exception
    System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)
    14:33:28.937|FATAL|1|Exception|0|Fatal Error - Inner Exception
    System.FormatException: Input string was not in a correct format.
       at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.ComponentModel.Int32Converter.FromString(String value, NumberFormatInfo formatInfo)
       at System.ComponentModel.BaseNumberConverter.ConvertFrom(ITypeDescriptorContext context, CultureInfo culture, Object value)

  • I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
    OT

  • Desktop Manager Version for BB 8310 (AT&T)

    I have lost the CD that came with my phone to install the Desktop Manager. I currently have a BB 8310 (AT&T). I now how to find the software in the website, however how can I know which software to download according to my phone? Which version should I download? Also, is it recommended to update my phone's software (if there is one)? Thanks@

    For Desktop Manager, version 4.6 or 4.7, I recommend withOUt the Media Manager software.
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    For your OS, upgrade it if you feel like, are having issues that an OS upgrade would improve, etc. Your personal decision.
    Here is a link to the latest OS upgrade and instructions:
    http://www.blackberryforums.com/general-8300-series-discussion-curve/159564-latest-os-8310-4-5-0-134...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Desktop Manager Version 6 Download Needed

    A few months ago I read a post that had a link so I could download Blackberry Desktop Manager Version 6 for Windows.
    Does anyone have access to a link?
    Cheers,
    Steve
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Sof​tware-for-PC/Cleanly-quot-Starting-Over-quot-with-​...
    Post (15) has links to older Desktop Software versions.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do i get a desktop only version of photoshop?

    how do i get a desktop only version of photoshop?  I do not need a web connected version...just a simple standalone.

    buy cs6 look on amazon or equivalent

  • Connector specific error - blackberry bold 9790 - desktop software version 6.1 and outlook 2010

    Hi there
    I've recently upgraded my business partners' outlook from 2007 to 2010.  In doing so we've had a corrupt profile which we have had to delete and then replace with a new one.  In doing so his outlook started working again but now his blackberry isn't synching the calendar entries. 
    Here's the basics:
    - Bberry model - Bold 9790
    - Bberry operating system - Blackberry's latest (7.1 I think)
    - Blackberry desktop software 6.1 - this is intentional as we have found in the newer version of hte desktop software that we cannot map our teamsite calendar from outlook and sync the entries
    - Outlook version 2010
    - Calendars we are trying to sync are a personal one from a pst folder and a teamsite one from sharepoint linked to our microsoft exchange set up.
    The error we are getting is a 'connector specific error'
    I have worked with him to create the PTtrace.log and tif.log files.  I've gotten reams of pages; but the errors on todays date (when the problem began) have come up with error 4238, 113, and 12.  We have tried un-installing and re-installing 6.1 as well and no luck.  We have re-set the configuration setup and re-mapped folders; chosen the new outlook profile, etc and still keep getting same error.
    I'm now starting to think that there is a problem with the mapi profile as a start and wonder if outlook needs to repair itself or whether we are getting the error because of a duplicate entry somewhere (though if you asked me to tell you where from the logs I couldn't identify it).
    I'm litterally tearing my hair out because my poor business partner lives and dies by his blackberry.  Really want to try to get this resolved; but need some help and suggestions as I've tried most of the main causes and fixes. 
    Any assistance would really be appreciated so I can put him and myself out of our misery.
    Thanks in advance.
    Cel

    Hi and Welcome to the Community...apologies for the delayed reply...hopefully you already have this resolved, but just in case!
    Thank you for the thorough report...that helps tremendously. Sadly, though, none of the errors you listed reveal anything useful when I search the public KBs...perhaps you will be more lucky
    http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
    Even though it sounds like you may have done all or part of this, I encourage you to research the process in this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Your suspicion about the MAPI Profile may well be warranted, in which case this KB might be useful.
    KB02083 How to create a Microsoft Outlook MAPI profile
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

    Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server.  On 32 bit Windows
    7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

    I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
    I think Windows 8.1 is not telling the terminal server what printers it has.

Maybe you are looking for

  • Why can't I click on iCloud or my email accounts on my iPhone to change my aol password?

    Why can't I click on iCloud or my email accounts on my iPhone to change my aol password?

  • Why can't I connect to my 3520 via wireless?

    I have a HP Deskjet 3520, and I am running on Windows 7/64 bit.  I have been able to setup my printer through the USB, and I have been able to get my printer connected to the same network, and have setup e-print even. However, I cannot connect to my

  • Dropped wi-fi connection because of IP address

    I have numerous devices connected to my home Wi-Fi using an Airport Extreme router. 2 iPhones, 2 iPads, 1 MacBook Air, 1 Apple TV, 2 Aiport Express' and 2 iMacs. The 2 iMacs continually get dropped from the network with an error message of "...anothe

  • Has Bigraphbean.jar been removed from Jdeveloper?

    Hi together, I am trying to show graph in a JSP (without using DataControl). And I found that, we can do it using oracle.dss.thin.beans.graph.ThinGraph However the jars required for the same seems missing in latest version of JDeveloper. e.g bigraphb

  • Cannot install updatea!

    I have spent all day trying to update to the new version of Itunes-Quicktime is the problem-can't delete it, removed the registry keys already,, says the file is corrupted. I'm tired of this crappy program,,what am I to do now?